PENNANT, SIGNAL, TYPE

"PENNANT, SIGNAL, SUBSTITUTE, INTERNATIONAL CODE "
"3RD SUBSTITUTE, ACRYLIC BUNTING, SIZE 4 "
"3 FT. 5 INCH HOIST, 6 FT. 11 INCH FLY, "
"TYPE I, CLASS 1A HEADING "
.
RP001: DLA PACKAGING REQUIREMENTS FORPROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SETFORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THEWEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER INEFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ONTHE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATECONTROLS.
ADDITIONAL INFORMATION FOR DD 22571 5-NAV-1:
.
"UNDER COLOR AND CABLE NUMBER OF COLORS DELETE
"AIR FORCE YELLOW -67108", AND SUBSTITUTE
"AIR FORCE YELLOW 67103", DELETE
"BROWN (2) AFRICAN BROWN, 80180", "BROWN (3)
COCOA, 80092" AND "BROWN(4) BROWN, 65016" AND
SUBSTITUTE "BROWN (2) SPICE BROWN, 80129",
BROWN (3) AFRICAN BROWN, 80180" AND
BROWN (4) COCOA, 80092" RESPECTIVELY.
UNDER NOTES, FOR NOTE 4, DELETE & SUBSTITUTE "4.
SEAL & SCROLL SHALL BE APPLIED TO THE BASE
FLAG CLOTH BYAPPLIQUE,HAND EMBROIDERY OR
MACHINE EMBROIDERY OR A COMBINATION OF THESE
PROCESSES.WHEN SEAL & SCROLL ARE APPLIQUED TO
THE FLAG,YELLOW EMBROIDERY YARN (AF YELLOW,
CABLE NO. 67103) SHALL BE USED."
FOR NOTE 5, DELETE IN ITS ENTIRETY.
ADD NEW NOTE: "THE PENNANTFLAG SHALL HAVE
SEVEN (7) WHITE EMBROIDERED STARS. SEE DE
TAIL 1A ON SUPPLEMENTAL SHEET. THE UNITED
STATES FLAG SHALL HAVE THIRTEEN (13) WHITE
EMBROIDERED STARS. SEE DETAIL 2A. THE RE
MAINING BLUE (3) PENNANT FLAG SHALL HAVE
THIRTEEN (13) WHITE EMBROIDERED STARS IN
A CIRCLE, AND ONE LARGER WHITE EMBROIDERED
STAR IN ITS CENTER. SEE DETAIL 3A.
UNDER MATERIALS FOR FLAG BASE, DELETE &SUB
STITUTE: "HEAVYWEIGHT NYLON CONFORMING TO A-A
59709, TYPE I, CLASS B". FOR "SEAL" DELETE &
SUBSTITUTE:"HEAVYWEIGHT NYLONCONFORMING TO
A-A-59709,TYPE I, CLASS B FOR APPLIQUE CLOTH &
RAYON OR POLYESTER YARN FOR EMBROIDERY".
UNDER "COLORS AND CABLENUMBERS OF COLORS"
DELETE COLUMN OF "PMS" COLORS IN ITS ENTIRETY.
UNDER "SEAL" THE COLORS AND CABLE NUMBERS
DELETE:
"BROWN (2) -AFRICAN BROWN 80180
BROWN (3) COCOA 80092
BROWN (4) BROWN 65016" AND SUBSTITUTE:
"BROWN (2) SPICE BROWN 80129
BROWN(3) AFRICAN BROWN 80180
BROWN (4) COCOA 80092".
SUPPLEMENT TO 5-NAV-1 DRAWING IS IN GATEWAY.
THE FOLLOWING INFO: IS FOR DWG. 7556605:
SHEET 1 OF 2, UNDER GENERAL NOTES, NOTE 8,
ITEM 2, PART FOR "STRIPES SIX" DELETE THE
CABLE NUMBER "80002" FOR THE WHITECOLOR AND
SUBSTITUTE "80001".
UNDER "GENERAL NOTES" FOR NOTE #4 DELETE AND
SPE1C1-26-Q-0483
SECTION B
SUPPLY/SERVICE: PGC: 31640 CONT'D
SUBSTITUTE AND ITS ENTIRETY TO DRAWING 7556605.
"4. THEHEADING SHALL BE IAW TYPE I, CLASS 1 OF
MIL-F-2692 WITH A 24 INCH HALYARD CONFORMING
TO MIL-R-17343. THE SNAPHOOKS SHALL BEIAW
MIL-H-15021. THE DESIGN ELEMENTS OF THIS FLAG
SHALL BE IAW THE FOLLOWING:".
UNDER NOTE #5E AND 5F DELETE IN THEIR ENTIRETY
ANDSUBSTITUTE:
"E. IDENTIFICATION AND CARE INSTRUCTION LABEL
REQUIREMENTS: THE FLAG SHALL HAVE TWO LABELS;
ONE IDENTIFICATION LABEL AND ONE CARE INSTRUCT
ION LABEL. EACH LABEL SHALL CONFORM TO TYPE IV,
CLASS 9 OF MIL-DTL-32075. EACH LABEL SHALL RUN
ANYWHERE ALONGTHE LENGTH OF THE HEADING AND
APPEAR ON THE REVERSE SIDE OF THE FLAG. THE
LABELS SHALL BE PLACED A MINIMUM OF 2 INCHES
FROM THE TOPOF THE HEADER AND NOT EXTEND
BEYOND 2 INCHES FROM THE BOTTOM EDGE. THE
LETTERING IN EACH LABEL SHALL BE APPROPRIATE
TO THE SIZE OFTHE HEADING BUT NOT MORE THAN
3/4 INCH HIGH.
(1) IDENTIFICATION LABEL: THE ARRANGEMENT OR
FORMAT OF THE INFORMATION IN THE LABELSHALL BE
LEFT UP TO THE MANUFACTURER. THE LABEL SHALL
CONTAIN THE FOLLOWING INFORMATION:
NOMENCLATURE:
CONTRACTOR'S NAME:
CONTRACTNUMBER:
NSN:
SIZE:
FIBER CONTENT: (FLAG AND HEADER)
(2) CARE INSTRUCTION LABEL: THE CARE INSTRUCTION
LABEL SHALL STATE THEFOLLOWING: DO NOT COM
PLETELY SUBMERSE THE FLAG IN SOAPY WATER. TO RE
MOVE DIRT, SPOTS, STAINS, ETC., HAND WASH IN
COLD WATER WITH A MILD DETERGENT OR DRY CLEAN."
UNDER NOTE #8, ITEM 3. FOR THE "RATTLES (13)"
DELETE "BRONZE W/BLACK OUTLINE UPPERMOST&
DETAILS";"80111/65018" AND SUBSTITUTE "GOLD
W/BLACK OUTLINE UPPERMOST & DETAILS"; "80110/
65018".
THE CABLE NUMBER CHANGE FOR NOTE 8, ITEM 2,
PART FOR "STRIPES SIX" IS RESCINDED. WITH
DRAWAL THE CABLE NUMBER OF THE WHITE STRIPES
REVERTS BACK TO THE ORIGINALCABLE NUMBER OF
"80002" CITED ON DRAWING 7556605, SHEET 1 OF 2.
.
BAR CODE LABEL/TAG FOR MIL-F-2692. EACH ITEM
SHALL BE INDIVIDUALLY BAR CODED. THE BAR CODE
ELEMENT SHALL BE A 13 DIGIT NATIONAL STOCK
NUMBER (NSN). THE BAR CODE FOR NSN SHALL BE
A MEDIUM TO HIGHDENSITY, CLEARLY LEGIBLE AND
READABLE BY SCANNER, AND SHALL BE LOCATED SO
THAT THEY ARE COMPLETELY VISIBLE ON THE ITEM
WHEN PACKAGED AS SPECIFIED. ATTACHMENT OF THE
LABEL SHALL CAUSE NO DAMAGE TO THE ITEM. THE
LABEL SHALL BE POSITIONED INSIDE THE PLASTIC
BAG ANDSHALL BE TYPE VII OF MIL-STD-32075.
BAR CODE DEFECTS:
-BAR CODE OMITTED OR NOT READABLE BY SCANNER
MINOR.
-HUMAN READABLEINTERPRETATION (HRI) OMITTED
MINOR.
-NOT VISIBLE ON FOLDED, PACKAGED ITEM-MINOR.
-CAUSE DAMAGE TO THE ITEM-MAJOR.
.
PAGE 25,PARAGRAPH 5.1.1.1.1, AT THE END OF THE
SENTENCE ADD: "THERE SHALL BE A WHITE PAPER
LABEL INSERTED INTO EACH BAG WITH THEFOLLOWING
INFORMATION: ITEM DESCRIPTION, CONTRACT NUMBER,
NATIONAL STOCK NUMBER (NSN), SIZE, CONTRACTOR'S
NAME. THE LETTERING SHALLBE A MINIMUM OF 18
POINTS (APPROXIMATELY 1/4 INCH).".
A-A-52094B Thread, Cotton dated 01 May 2019 No Additional Information (ref.T1481) ADDITIONAL INFORMATION FOR MIL-PRF-20696: .
SPE1C1-26-Q-0483
SECTION B
SUPPLY/SERVICE: PGC: 31640 CONT'D
NO ADDITIONAL INFORMATION FOLLOWS.
.
ADDITIONAL INFORMATION FOR MIL-T-713:
.
NOADDITIONAL INFORMATION FOLLOWS.
.
ADDITIONAL INFORMATION FOR MIL-P-15011:
NO ADDITIONAL INFORMATION FOLLOWS.
(ref. T1368 -6/15/06)
ADDITIONAL INFORMATION FOR MIL-R-17343D: . MIL-R-17343D ROPE, NYLON, 6/2/69, AM 1,
. 8/9/71. NOT. 1,VALIDATION 05 MAY 1989. . ADDITIONAL INFORMATION FOR MIL-C-22775: . SHRINKAGE REQUIREMENTS UNDER MIL-C-22775; SHRINKAGE SHALL NOTEXCEED 5.0 PERCENT MAX. IN THE WARP DIRECTION AND 3.2 PERCENT IN THE FILLING DIRECTION. . PAGE 2. 2.2, DELETE AND SUBSTITUTE: "2.2NON-GOVERNMENT PUBLICATIONS. THE FOLLOWING DOCUMENTS FORM A PART OF THIS DOCUMENT TO THE EXTENT SPECIFIED HEREIN. UNLESSOTHERWISE SPECIFIED, THE ISSUES OF THESE DOCUMENTS ARE THOSE CITED IN THE SOLICITATION OR CONTRACT". AATCC AATCC 8 COLORFASTNESS TOCROCKING: AATCC CROCK- METER METHOD AATCC 16E COLORFASTNESS TO LIGHT (WATER-COOLED XENOR-ARC CONTINUOUS LIGHT) AATCC 20A FIBERANALYSIS: QUANTITATIVE AATCC 61 COLORFASTNESS TO LAUNDERING, HOME AND COMMERCIAL: ACCELERATED AATCC 81 PH OF WATER-EXTRACT FROM WETPROCESSED TEXTILES AATCC 106 COLORFASTNESS TO WATER: SEA (COPIES OF THESE DOCUMENTS ARE AVAILABLE ONLINE AT HTTP://WWW.AATCC.ORG ORFROM THE AATCC,P.O. BOX 12215, RESEARCH TRIANGLE PARK, NC 27709.) ASTM INTERNATIONAL ASTM D737 TEST METHOD FOR AIR PERMEABILITYOF TEXTILE FABRICS ASTM D 3775 STANDARD TEST METHOD FOR FABRIC COUNT OF WOVEN FABRIC ASTM D3776 STANDARD TEST METHODS FOR MASSPER UNIT AREA (WEIGHT OF FABRIC) ASTM D5034 STANDARD TEST METHOD FOR BREAKING STRENGTH AND ELONGATION OF TEXTILE FABRICS(GRAB TEST) (COPIES OF THESE DOCUMENTS ARE AVAILABLE ONLINE AT HTTP://WWW.ASTM.ORG OR ASTM INTERNATIONAL,100 BARR HARBOR DRIVE, WEST CONSHOHOCKEN, PA 19428- 2959.) PAGE 3. 3.4.2, DELETE AND SUBSTITUTE: "3.4.2 COLORFASTNESS. THE FINISHED CLOTH SHALL SHOW FASTNESSTO WET CROCKING, DRY CROCKING, LAUNDERING, SEAWATER, AND LIGHT (40 AATCC FADING UNITS) EQUAL TO OR BETTER THAN THE STANDARD SAMPLEWHEN TESTED AS SPECIFIED IN 4.5. WHEN NO STANDARD SAMPLE IS AVAILABLE, THE FINISHED CLOTH SHALL SHOW A MINIMUM OF "GOOD" OR RATINGOF "3" TO THE AFOREMENTIONED COLORFASTNESS REQUIREMENT. 3.5., TABLE I, DELETE SUBSTITUTE: TABLE I- PHYSICALREQUIREMENTS WEIGHT,OZ/SQ.YD.MIN. YARNS(PER INCH)MIN. BREAKING STRENGTH (LBS.) MIN. AIR PERMEABILITY (FT3/ MIN / FT2) MIN. WEAVE 4.5 WARP 28 FILLING 29 WARP 95 FILLING 97 250 PLAIN PAGE 4. 3.5.2., DELETE AND SUBSTITUTE: "3.5.2. DIMENSIONAL STABILITY.THE FINISHED CLOTH
SPE1C1-26-Q-0483
SECTION B
SUPPLY/SERVICE: PGC: 31640 CONT'D
SHALL NOT SHRINK OR ELONGATE MORE THAN + 4% IN
BOTH THE WARP OR FILLING DIRECTION WHEN TESTED
AS SPECIFIED IN 4.5."
PAGE8.
4.5, DELETE AND SUBSTITUTE:
"4.5 TESTING OF THE END ITEM. THE METHODS OF
TESTING LISTED IN TABLE II SHALL BE FOLLOWED
TO VERIFYTHE REQUIREMENTS IN SECTION 3. THE
PHYSICAL AND CHEMICAL VALUES SPECIFIED IN
SECTION 3 APPLY TO THE AVERAGE OF THE
DETERMINATIONSMADE ON THE SAMPLE UNIT FOR TEST
PURPOSES AS SPECIFIED IN THE APPLICABLE TEST
METHODS. ALL TEST REPORTS SHALL CONTAIN
INDIVIDUALVALUES UTILIZED IN EXPRESSING THE
FINAL RESULTS. THE SAMPLE UNIT FOR TEST
PURPOSES SHALL BE 3-1/2 CONTINUES YARDS FULL
WIDTH OF THEFINISHED CLOTH. THE LOT SIZE SHALL
BE EXPRESSED IN UNITS OF ONE YARD. THE LOT SHALL
BE UNACCEPTABLE IF ONE OR MORE OF THESAMPLE
UNITS FAIL TO MEET ANY OF THE TEST REQUIREMENTS
SPECIFIED. THE SAMPLE SIZE SHALL BE IN ACCORDANCE
WITH THE FOLLOWING.
LOTSIZE (YARDS) SAMPLE SIZE (UNITS)
800 OR LESS 2
801 UP TO AND INCLUDING 22,000 3
22,001 AND OVER 5
TABLE II TEST METHODS
CHARACTERISTIC REQUIREMENT PARA. TEST METHOD
ACRYLIC FIBER
IDENTIFICATION OF FIBER 3.3.1AATCC 20A
LUSTER OF FIBER 3.3.1 VISUAL 1
QUALITY,DENIER,STAPLE LENGTH 3.3.1 VISUAL 1
YARN PLY 3.3.2 VISUAL 1
WEIGHT TABLE I ASTM D3776,OPTION C
YARNS PER INCH TABLE I ASTM D3775
BREAKING STRENGTH TABLE IASTM D5034
AIR PERMEABILITY TABLE I ASTM D737
WEAVE TABLE I VISUAL 1
DIMENSIONAL STABILITY(AFTER 1 CYCLE) 3.5.2AATCC
96, TEST VC, D 2
NON-FIBROUS 3.7 AATCC 20A
COLORFASTNESS TO:
CORCKING, DRY OR WET 3.4.2 AATCC 8
LAUNDERING 3.4.2 AATCC 61, TEST 3A 3
SEA WATER 3.4.2 AATCC 106
LIGHT (40 AATCC FACING UNITS) 3.4.2 AATCC 16E
PH 3.10 AATCC 81
1 A VISUAL COMPARISON WITH THE STANDARD SAMPLE
SHALL BE MADE TO DETERMINE COMPLIANCE. ONE
DETERMINATIONSHALL BE MADE FROM EACH SAMPLE
UNIT AND THE RESULTS REPORTED AS "PASS" OR "FAIL".
2 EXCEPT THE SAMPLES SHALL NOT BE SUBJECTEDTO
RESTORATION FORCES.
3 ONLY THE STAINS ON THE ACRYLIC FIBER SHALL BE
EVALUATED.
.
ADDITIONAL INFORMATION FORFED-STD-191:
FED-STD-191A NOTICE 7, DATED AUGUST 9, 2000 IS HEREBY INACTIVE FOR NEW
DESIGN. WHEN NOT USING FED-STD-191, SEEINTERIM CHANGES TO END ITEM
SPECIFICATION FOR REPLACEMENT ASTM.
INTERIM CHANGES TO FED-STD-191A:
TEST METHOD 5202, PARA. 5.3,DELETE FIRST SENTENCE AND SUBSTITUTE: "THE
SPECIMEN SHALL BE CLAMPED FIRMLY, WITH ONE END FLUSH WITH THE OUTER EDGE
OF THE VISE,SUCH THAT ONE INCH OF SPECIMEN LIES WITHIN THE CLAMP AND
ONE INCH OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION (FACE OF
THE VISE), AND WITH THE LONG EDGE PARALLEL TO THE FACE OF THE DIAL
PLATE".
TEST METHOD 5309.1 ABRASION RESISTANT OF TEXTILE WEBBING.PAGE 1, PARA
4.1.2,LINE 4: DELETE "B-97" AND SUBSTITUTE "B-91".
THE FOLLOWING METHODS ARE IDENTIFIED AS SPECIFYING OZONEDEPLETING
SUBSTANCES: 1100, 1200, 1240, 1400, 1410, 1500, 1510,1520,1530, 1540,
AND 1550. PARA 5.1 OF THESE TEST METHODS REQUIRETHE USE OF 1,1,1
SPE1C1-26-Q-0483
SECTION B
SUPPLY/SERVICE: PGC: 31640 CONT'D
TRICHLOROETHANE, ALCOHOL OR ETHER. 1,1,1-TRICHLORETHANE IS AN OZONE
DEPLETING SUBSTANCE (METHYL CHLOROFORM) ANDIS THEREFORE PROHIBITED.
THE USE OF EITHER ALCOHOL OR ETHER IS REQUIRED WHEN THESE METHODS ARE IN
BASIC OR ANY REFERENCEDDOCUMENT.
METHOD 5202, STIFFNESS OF CLOTH, DIRECTIONAL; CANTILEVER BENDING METHOD.
PAGE 2, PARA. 5.3 DELETE FIRST SENTENCE ANDSUBSTITUTE WITH THE
FOLLOWING: "THE SPECIMEN SHALL BE CLAMPED FIRMLY, WITH 1 END FLUSH WITH
THE OUTER EDGE OF THE VISE, SUCH THAT 1" OF THE SPECIMEN LIES WITHIN THE
CLAMP AND 1" OF THE SPECIMEN EXTENDS BEYOND THE CENTER OF ROTATION
(INNER FACE OF THE VISE) ANDWITH THE LONG EDGE PARALLEL TO THE FACE OF
THE DIAL PLATE."
METHOD 5556.1, MOBILE LAUNDRY NSN/Part Number: 8345-00-926-5991 Quantity: 2,000 EA Purchase Request: 7017720986QTY: 2000 Delivery: 120 days ADO