Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, November 11 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

This Government Contract opportunity from Department Of Defense was posted on September 17, 2020. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

PHASED ARRAY ULTRASONIC TESTING EQUIPMENT

Awarded
SPMYM220Q2845Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339113
New
DIBBS
Medical Device Supply (NSN 6530016456923)This subcontract involves the manufacture and supply of specific medical devices, identified by NSN 6530016456923, for prime contractors supporting DLA Medical contracts. The required devices must measure 6 to 7 inches in length and 1 to 2 inches in diameter, featuring a lift-off cover and a securable cap. All items must adhere to Medical Marking Standard No. 1 and maintain strict compliance with FDA Regulation 880.5570 Class II. Managed by the Department of Defense under the Medical Supply Chain FSH, the contract falls under NAICS code 339113. Performance of the contract will take place in Fort Bliss, Texas. The solicitation was posted on October 29, 2026, with a response deadline set for November 5, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 7 hours ago

DEADLINE

in 7 days
NAICS: 339113
New
DIBBS
Disposable Plastic Inhaler Tube SupplierThis subcontract involves the manufacture and supply of clear, non-sterile, disposable plastic inhaler tubes for prime contractors supporting Department of Defense Medical Supply Chain projects. The required tubing must be 84 inches in length with force-fit flared tips, individually wrapped according to MIL-STD-2073-1E and Special Packaging Instructions MPPWN00001. Finished products are to be delivered in labeled packages of 50 tubes to the Naval Medical Readiness Logistics Command. Compliance is mandatory regarding the Buy American Act and DFARS 252.204-7012 cybersecurity standards. The performance of the contract is centered in Williamsburg, Virginia, under NAICS code 339113. Interested parties must adhere to the response deadline of November 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 339113
New
DIBBS
Supplier of Bartholin Gland CathetersThis subcontract involves the supply of sterile, disposable Bartholin gland catheters to prime contractors for the Department of Defense Medical Supply Chain. The required catheters must be 10 FR size and 5 cm in length, featuring 5 CC inflated latex balloons and including necessary needles and syringes. All products must strictly adhere to MIL-STD-2073-1E and Medical Marking Standard No. 1, with deliveries consisting of two packages of six catheters each under NSN 6515-01-254-4126. The opportunity is categorized under NAICS code 339113 and is designated for performance in Twentynine Palms, California. Interested parties must respond by November 4, 2026, following the posting date of October 29, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 339113
New
DIBBS
Supply of Sterile Nonadherent Pads (NSN 6510-00-986-2942)This subcontract involves the supply of sterile, nonadherent medical pads for prime contractors supporting Department of Defense supply contracts through the Medical Supply Chain MD Surg FSF. The required items are white nonwoven cotton pads measuring 3 inches by 8 inches, featuring a perforated plastic film covering on both sides. Each pad must be sterile and individually packaged, with final delivery occurring in packages of 50. All supplies must strictly adhere to the specifications for NSN 6510-00-986-2942 and maintain a minimum shelf life of 36 months from the date of delivery. The place of performance for this contract is located at Fort Bliss, Texas. The solicitation is categorized under NAICS code 339113, with a response deadline set for November 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 339113
New
DIBBS
Supply of Shock-Resistant Aneroid Cuff SetsThis subcontract involves the supply of shock-resistant, latex-free reusable aneroid cuff sets designed for small adults to support prime contractors for the Department of Defense Medical Supply Chain. Each complete set must include a gear-free cuff-mounted aneroid gage, inflation tube, one-piece cuff, valve, and infiltration bulb. All units must be certified to an accuracy of +/- 3 mm HG and come with a five-year warranty. The contract requires strict adherence to the Buy American Act, the Berry Amendment, and Medical Marking Standard No. 1. Performance for this requirement is located at Fort Bliss, Texas, under NAICS code 339113. The response deadline for this opportunity is November 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 339113
New
DIBBS
Supply of Flashbreaker Tape #1This subcontract involves the supply of 10 rolls of Flashbreaker Tape #1, identified by NSN 8040LLNC19218 and Airtech International Inc Part Number FLASHBREAKER 1, to support prime contractors delivering for the Defense Logistics Agency. The materials must be delivered FOB Destination to Cherry Point, zip code 28533-0021. The contract requires strict adherence to ASTM D3951 and MIL-STD-129 standards for packaging and marking. Additionally, the provider must ensure full compliance with the Buy American Act and DFARS cybersecurity regulations. The solicitation was posted on October 29, 2026, with a response deadline of November 6, 2026, under NAICS code 339113.
Defense Logistics Agency

POSTED

about 7 hours ago

DEADLINE

in 8 days
NAICS: 339113
New
DIBBS
Supply of Sterile Surgical Sponges (Versalon Blend)This subcontract involves the supply of 16,000 boxes of sterile, all-purpose surgical sponges to prime contractors supporting Department of Defense medical supply contracts through DLA Troop Support. The required sponges must be 4x4 inch, 4-ply, non-woven disposable products made from a Versalon rayon/polyester blend. These items must be latex-free, highly absorbent, and meet strict medical sterility standards for use in wound care, wiping, and prepping. The contract is managed under NAICS code 339113 for the Medical Supply Chain MD Surg FSF agency, with the place of performance located at Fort Bliss, Texas. Interested parties should note the posting date of October 29, 2026, with a response deadline set for November 4, 2026.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 339113
New
DIBBS
Supply of Nonmetallic Hose Assemblies (NSN 4720012681978)This subcontract involves the manufacture or sourcing of three nonmetallic hose assemblies, identified by NSN 4720012681978, for prime contractors working on DLA Weapons Support fluid handling projects. All deliverables must strictly comply with the specifications set by the DLA Fluid Handling Division, and logistics will be managed through the First Destination Transportation program. The project is managed by the Department of Defense under the DLA Weapons Support Fluid Handling Division, with the place of performance located in Jacksonville, Florida. The solicitation was posted on October 29, 2026, with a response deadline of November 9, 2026, falling under NAICS code 339113.
DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

about 7 hours ago

DEADLINE

in 11 days
NAICS: 339113
New
DIBBS
Supplier of Y-Type IV Administration Sets
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 339113
New
DIBBS
Supply of Casualty Response Documentation Tool (NSN 6515-01-575-2772)This subcontract involves the procurement or manufacture of 32 Casualty Response Documentation Tools, identified by NSN 6515-01-575-2772, to support prime contractors on DLA Troop Support Medical Supply Chain projects. The items must adhere to all technical specifications and be delivered FOB Destination to military installations located at Fort Bragg, North Carolina, and Rapid City, South Dakota. The contract is managed under the Department of Defense Medical Supply Chain and falls under NAICS code 339113. A strict delivery timeline of 20 days is required for the packaging and shipment of all units to the designated locations.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 339113
New
DIBBS
Supply of Nonpneumatic TourniquetsThis subcontract involves the supply of nonpneumatic tourniquets to prime contractors supporting DLA Troop Support Medical Supply Chain projects for the Department of Defense. The required equipment must feature one-handed single routing buckles, reinforced windless clip systems, and beveled contact bars. The specific order consists of five units of NSN 6515015217976, which must be delivered in sealed unit containers. All items must be packed and marked in strict accordance with MIL-STD-2073-1E, Special Packaging Instructions MPPWN00001, and Medical Marking Standard No. 1. The place of performance for this contract is located at Fort Polk, Louisiana. The solicitation was posted on October 29, 2026, with a response deadline of November 4, 2026, under NAICS code 339113.
MEDICAL SUPPLY CHAIN MD SURG FSF

POSTED

about 7 hours ago

DEADLINE

in 6 days
NAICS: 339113
New
DIBBS
Supplier of Disposable Heating Blankets (NSN 6532015254062)This subcontract involves the supply of disposable heating blankets for prime contractors under DLA Troop Support supply contracts for the Department of Defense Medical Supply Chain. The blankets must adhere to NSN 6532015254062 specifications, measuring 34 by 48 inches and utilizing water-repellent, UV-protective materials. Each unit must provide 40 degrees Celsius of heat for a duration of 6 to 8 hours through either chemical or autonomous activation. The supplier is required to maintain FDA regulation compliance and a valid CAGE code. Deliveries consist of 2,000 units per MMS NO. 1 packaging standards, with the place of performance located in Rapid City. The response deadline for this opportunity is November 5, 2026.
MEDICAL SUPPLY CHAIIN FSH

POSTED

about 7 hours ago

DEADLINE

in 7 days

AI Contract Overview

Show more

Award Notice SPMYM220Q2845, issued by DLA Maritime Puget Sound for the Department of Defense, concerns the procurement of Phased Array Ultrasonic Testing Equipment under Project 941-600. This total small business set-aside contract focuses on the acquisition of an Omniscan X3 and associated software and equipment from Olympus America Inc. The procurement was justified as a sole source to maintain consistency with existing equipment used across U.S. Naval Shipyards, ensuring uniform training and inspection techniques at the Trident Refit Facility Bangor. The technical requirements specify a detailed parts list and mandate that the equipment be accompanied by a Nationally Recognized Testing Laboratory certification report to ensure compliance with OSHA and CFR Title 29 Part 1910 standards. Performance and delivery are centered in Silverdale, Washington, with specific requirements for electronic invoicing via WAWF and base access through DBIDS for delivery to Naval Facilities.

General Info

Agency

Department Of Defense → DLA Maritime - Puget Sound

Contract Value

$172,908

NAICS

339113 - Surgical Appliance and Supplies Manufacturing

Place of Performance

Silverdale, WA, 98315, USA

Set-Aside

SBA

Awardee

B & H INTERNATIONAL LLC

Award Issued Date

Documents

4

CDRL NRTL Certification - Phased Array Ultrasonic Testing Equipment

PDF, High priority: read this firstcdrl
High

Project #941-600 Salient Characteristics - PAU Testing Equipment

PDF, High priority: read this firstspecifications
High

SPMYM2-20-Q-2845 PAU Testing Equipment

PDF, High priority: read this firstrfq
High

Justification for Sole Source - Olympus America Inc PAU Testing Equipment

PDF, Low priorityjustification-and-authorization
Low

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded
Posted

Combined Synopsis

Awarded

Contract was awarded

Submission Closed

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA Maritime - Puget Sound
Contacts1 person available
OfficeBREMERTON, WA, 98314-5000, USA
Organization / AgencyDepartment Of Defense → DLA Maritime - Puget Sound
Office AddressBREMERTON, WA, 98314-5000, USA
Contacts
Timothy J. Easter
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
DLA MARITIME PUGET SOUND intends to procure PHASED ARRAY UTRASONIC TESTING EQUIPMENT manufactured in accordance with material specifications. It is anticipated that the solicitation will be issued 100% TOTAL SMALL BUSINESS SET ASIDE using commercial and simplified acquisition procedures in accordance with FAR Parts 12 and 13.5. The applicable NAICS Code is 339113. The resultant award will be a firm fixed-price supply contract for FOB Destination delivery to BUILDING 7000 DOOR 12 7000 FINBACK CIRCLE SILVERDALE WA 98315 Delivery is required on or before 08 SEP 2020.. Offers wishing to submit a quote are responsible for downloading their own copy of the RFQ and for frequently monitoring the site for any amendments. The solicitation number for this requirement is SPMYM2-20-Q-2845 It is anticipated that the solicitation will be available for download on or around 22 AUG 2020. The closing date of the solicitation will be on or around 31 AUG 2020, unless a later date is specified in the solicitation. The RFQ will be posted at http://www.betasam.gov/. A bidders list will not be maintained by this office, no telephone or fax requests for the RFQ package will be accepted. Failure to respond to the electronically posted RFQ and associated amendments and return the entire completed RFQ solicitation package prior to the date and time set for receipt of quotes may render vendor offer non-responsive and result in rejection of the same. Any questions must be submitted in writing via e-mail to contact@example.gov

More opportunities from Department Of Defense → DLA Maritime - Puget Sound

Same awarding agency

NAICS: 332216
New
Federal
FEED AXIAL UNIT
Solicitation # SPMYM227Q1122
Solicitation SPMYM2-26-Q-1122 is a total small business set-aside for the acquisition of a Feed Axial Unit for the DLA Maritime Puget Sound, with delivery requested by November 16, 2026. This firm fixed price contract requires quotes to be submitted via email to Kim Vo by 4:00 PM Pacific Time on October 30, 2026. To be considered, quotes must be fully completed and include the manufacturer's name, country of origin, lead time, part number, and original manufacturer specification sheets. Pricing must be quoted as FOB Destination to the Puget Sound Naval Shipyard IMF in Bremerton, Washington. The government will award the contract to a responsible offeror based on a combination of technical capabilities, price, and past performance evaluated through the Supplier Performance Risk System. Strict packaging and marking standards are required, including compliance with ASTM-D-3951 and MIL-STD-129, with a prohibition on materials such as asbestos and loose fill polystyrene. Invoicing must be processed electronically through Wide Area Work Flow, and the contractor must maintain active registration in the System for Award Management. Inspection and acceptance will occur at the destination, with a seven-day inspection period and a requirement for the contractor to provide documented test reports to substantiate conformity.
Saw Blade and Handtool Manufacturing

POSTED

about 12 hours ago

DEADLINE

in about 23 hours
View Details
NAICS: 332212
Federal
Supply of Setting Rings (2.4" and Other Sizes)This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, requires the supply of 14 precision setting rings designed for the calibration and verification of TESA/Brown & Sharpe internal micrometers. The order specifically includes a 2.4 inch ring and requires all units to be compatible with the 599-281 series system while providing certified dimensional accuracy. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance for this requirement will take place in Bremerton, Washington, with the solicitation posted on August 10, 2026.
Hand and Edge Tool Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 332212
Federal
Supply of TESA/Brown & Sharpe Intrimik Internal Micrometers (0.7"–7.0")This subcontract, issued by the Department of Defense through DLA Maritime - Puget Sound, involves the procurement of 29 TESA/Brown & Sharpe Intrimik precision internal micrometers. These analog tools, ranging from 0.7 to 7.0 inches, are designed under the ABBE principle to ensure high-accuracy measurements and will serve as direct replacements for existing 599-281 series tools within PSNS toolrooms and calibration laboratories. The contract is designated as a total Small Business Set Aside under NAICS code 332212. Performance of the contract will take place in Bremerton, Washington, with the official posting date set for August 10, 2026.
Hand and Edge Tool Manufacturing

POSTED

3 months ago

DEADLINE

N/A
View Details
NAICS: 811212
Federal
Warranty, Maintenance & Repair ServicesThis contract provides comprehensive post-delivery technical support, preventive maintenance, and repair services specifically for HandyScan 3D scanning units operated in industrial environments. The services are designed to ensure uninterrupted performance and longevity of the equipment, with all work performed in accordance with industry standards and under the oversight of the Department of Defense through DLA Maritime - Puget Sound. The scope encompasses proactive maintenance measures to prevent system failures, timely repairs to restore functionality, and responsive technical assistance tailored to the high-demand conditions of industrial use. The contract is structured as a small business set-aside under the SBA program, with the NAICS code 811212 indicating it pertains to electronic and precision equipment repair and maintenance. Performance is required at the designated location in Bremerton, Washington, with a zip code of 98314. Although the solicitation number and point of contact are not provided, the contract was posted on July 1, 2026, and is classified as a subcontract under federal procurement regulations. All work must comply with federal standards and be executed by a qualified small business entity to meet the set-aside requirement.
Computer and Office Machine Repair and Maintenance

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 238990
Federal
On-Site Installation & System Integration ServicesThe contract entails on-site installation, calibration, and full integration of advanced 3D scanning systems with existing software and hardware infrastructure at the Puget Sound Naval Shipyard in Bremerton, Washington, with a zip code of 98314. The work involves ensuring seamless compatibility between the new scanning technology and current military-grade systems, requiring specialized technical expertise to support naval operations and maintenance workflows. All services must be performed directly at the facility, with no remote or off-site alternatives permitted. This is a subcontract awarded under a Total Small Business Set-Aside classification per FAR 19.5, meaning only small businesses are eligible to bid, and the North American Industry Classification System code 238990 applies to other specialized construction services. The contract is managed by DLA Maritime under the Department of Defense and was posted on July 1, 2026, with performance expected to occur at the shipyard location. The nature of the work demands compliance with federal defense standards, secure handling of proprietary systems, and coordination with shipyard personnel to minimize operational disruptions during implementation.
All Other Specialty Trade Contractors

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 611430
Federal
Technical Training & Workforce Integration SupportThis contract supports the technical training of government personnel in the operation, data processing, and integration of Creaform 3D scanners into existing precision coordinate metrology workflows. The goal is to enhance workforce capabilities by ensuring seamless adoption of advanced 3D scanning technology within established quality control and inspection processes. Training will focus on practical application, data interpretation, and system interoperability to maximize efficiency and accuracy in field and laboratory environments. The contract is structured as a small business set-aside under the SBA program, classified under NAICS code 611430 for other schools and instruction, and is managed by the Department of Defense through DLA Maritime - Puget Sound. Performance is located in Bremerton, Washington, with a posted date of July 1, 2026, indicating this is a future procurement opportunity. While specific funding or duration details are not provided, the emphasis is on workforce development and technology integration, requiring the contractor to deliver tailored instruction and support that aligns with DoD standards and existing metrology infrastructure.
Professional and Management Development Training

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 333248
Federal
3D Scanner Equipment Supply – Creaform HandyScan Black+EliteThis contract entails the sole-source procurement of Creaform HandyScan Black+Elite handheld laser 3D scanners and associated support equipment to enhance portable coordinate measurement capabilities for the Department of Defense. The acquisition is structured as a subcontract under a Total Small Business Set-Aside, meaning it is reserved exclusively for small businesses as defined by the Small Business Administration under NAICS code 333248, which covers other commercial and service industry machinery manufacturing. The equipment will be delivered and deployed at the place of performance in Bremerton, Washington, with a ZIP code of 98314, supporting critical metrology functions for the DLA Maritime - Puget Sound office. The contract was posted on July 1, 2026, and is intended to provide advanced, on-site 3D scanning technology essential for precision measurement, inspection, and reverse engineering tasks in field and facility environments.
All Other Industrial Machinery Manufacturing

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 611430
Federal
Operator Training & Workflow CertificationThe contract focuses on training government personnel in the safe and effective operation of new 3D printing systems, with emphasis on proper resin handling, print optimization techniques, and strict adherence to Code 106 and Code 109 compliance standards. This initiative is designed to ensure personnel are fully certified in operational workflows, minimizing risks associated with hazardous materials and maximizing the reliability and efficiency of printed outputs in support of federal missions. Training will be delivered under a Small Business Set-Aside, reserved exclusively for small business concerns as defined by the SBA, and falls under the NAICS code 611430 for other technical and trade schools, indicating a specialized educational services component. Performance of the contract is centered in Bremerton, Washington, with a zip code of 98314, aligning operations with the Department of Defense through DLA Maritime - Puget Sound. Although the solicitation number and point of contact are not provided, the contract type is clearly identified as a subcontract, suggesting it is part of a larger defense procurement chain. The posting date of June 30, 2026, indicates this is a forward-looking opportunity, likely in the planning or pre-award phase, with the expectation that qualified small businesses will deliver tailored training programs that meet stringent federal safety and procedural requirements.
Professional and Management Development Training

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 811211
Federal
Warranty & Preventive Maintenance ServicesThis contract entails the provision of comprehensive service warranty and ongoing preventive maintenance for all Formlabs 3D printing systems delivered under the agreement. The scope covers full operational support to ensure system reliability, performance, and longevity through scheduled preventive measures and prompt resolution of any defects or malfunctions covered under the warranty terms. Services are designed to minimize downtime and maintain optimal functionality of the equipment throughout the contract period. The agreement is structured as a subcontract under a Total Small Business Set-Aside, classified under NAICS code 811211 for repair and maintenance services. The performance location is designated as Bremerton, Washington, with a zip code of 98314. The contracting agency is DLA Maritime - Puget Sound, operating under the Department of Defense, and the contract was posted on June 30, 2026. All work must be executed by a small business entity as defined by SBA standards, and the contract is specifically reserved for small business participation in accordance with FAR 19.5.
Consumer Electronics Repair and Maintenance

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 811212
Federal
Installation & Integration of 3D Printing SystemsThe contract involves the on-site installation, calibration, and seamless integration of Form 4 and Form 4L 3D printing systems into existing operational workflows at the Bremerton location with a zip code of 98314. The work requires ensuring full compatibility between the new hardware and software systems and the current infrastructure, including alignment with established processes to maintain continuity and efficiency. This effort is critical to enhancing operational capability through advanced additive manufacturing technology within the defined site. This subcontract is designated as a Total Small Business Set-Aside under SBA guidelines with a NAICS code of 811212, indicating it is reserved exclusively for small businesses. The contracting activity is managed by DLA Maritime - Puget Sound under the Department of Defense, with performance occurring entirely at the Bremerton facility. The solicitation was posted on June 30, 2026, and while no specific point of contact is listed, the work scope emphasizes technical precision, system interoperability, and direct support to DoD operations in a classified or restricted environment typical of military logistics sites.
Computer and Office Machine Repair and Maintenance

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 333340
Federal
Supply of Formlabs Form 4L 3D Printer SystemThe contract entails the procurement and delivery of a complete Formlabs Form 4L 3D printing system, including the large-format SLA printer, necessary printing materials, proprietary software, and associated support services. This system is intended for advanced additive manufacturing capabilities, supporting high-precision, large-scale resin-based printing for specialized applications. The contract is structured as a subcontract under a Total Small Business Set-Aside, classified under NAICS code 333340, which designates it exclusively for small business contractors as defined by the Small Business Administration. Performance of the contract is required to be carried out in Bremerton, Washington, with a postal code of 98314. The contracting entity is DLA Maritime - Puget Sound, operating under the Department of Defense, and the solicitation was posted on June 30, 2026, indicating an upcoming procurement cycle. No point of contact is listed in the provided data, and the full details can be accessed via the SAM.gov public portal.

POSTED

4 months ago

DEADLINE

N/A
View Details
NAICS: 333340
Federal
Supply of Formlabs Form 4 3D Printer SystemsThe contract is for the procurement and delivery of two Formlabs Form 4 Complete 3D printer systems, encompassing the printers themselves, compatible resins, necessary software licenses, and all required accessories. The scope includes professional installation and comprehensive warranty support to ensure seamless integration and ongoing operational reliability. The systems are destined for use at a U.S. Department of Defense facility located in Bremerton, Washington, with a ZIP code of 98314, indicating the intended operational environment is within a military logistics or maintenance context under DLA Maritime - Puget Sound. This acquisition is structured as a subcontract under a Total Small Business Set-Aside classification, meaning only small businesses eligible under SBA guidelines may bid, aligning with FAR 19.5 regulations. The North American Industry Classification System code 333340 identifies it within the industrial machinery manufacturing sector, underscoring the technical nature of the equipment being procured. The solicitation was posted on June 30, 2026, and is managed through the SAM.gov platform, with no designated point of contact listed. The effort prioritizes full system delivery, support, and compliance with federal procurement standards for defense-related small business contracts.

POSTED

4 months ago

DEADLINE

N/A
View Details

Earlier notices in this NAICS code

Posted before this notice, open and closed

NAICS: 339113
Closed
Federal
6515--(C2) 436 MTVA Nitrile Exam Gloves COVID-19 Amendment to a Previous Combined Solicitation
Solicitation # 36C25920Q0550
Network Contract Office 19 (36C259)

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 339113
Awarded
Federal
Notice of intent to Sole Source
Solicitation # N0025920N0069
Naval Medical Center San Diego Ca

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 339113
Awarded
Federal
6515--Motor/Hoist Replacement
Solicitation # 36C24720Q1148
247-NETWORK Contract Office 7 (36C247)

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 339113
Awarded
Federal
6515--STERILIZERS - SPS
Solicitation # 36C25820Q0391
258-NETWORK Cntrct Office 22G (36C258)

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 339113
Awarded
Federal
6640--NEW - Dose Calibrator
Solicitation # 36C25720Q1346
257-NETWORK Contract Office 17 (36C257)

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 339113
Awarded
Federal
6515-- Stock Order-Mattresses_Tables_Beds
Solicitation # 36C26120Q1142
261-NETWORK Contract Office 21 (36C261)

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 339113
Awarded
Federal
42--FALL ARRESTER ASSEM
Solicitation # SPE8E520T4449
DLA Troop Support

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 339113
Awarded
Federal
65--CABINET,PHARMACEUTI
Solicitation # SPE2DH20T5285
DLA Troop Support

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 339113
Awarded
Federal
6515--LVN - Stryker Surgical Lights
Solicitation # 36C25520Q0786
255-NETWORK Contract Office 15 (36C255)

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 339113
Awarded
Federal
UNIVERSAL CHARING WAND ASSY, RIT-PAK III ASSY, and SCBA 4500 PSI4.5 AP75, SH QD/PT/DEB/CS
Solicitation # 80NSSC20742829Q
NASA Shared Services Center

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details
NAICS: 339113
Federal
6515--NX EQ Emergency Patient Evacuation Sled Brand Name or Equal Notice of Cancellation of Solicitation
Solicitation # 36C10G20Q0044
Strategic Acquisition Center Fredericksburg (36C10G)

POSTED

about 6 years ago

DEADLINE

N/A
View Details
NAICS: 339113
Closed
Federal
6515--MWV Bed Rental Sole Source Notice
Solicitation # 36C24520Q0754
245-NETWORK Contract Office 5 (36C245)

POSTED

about 6 years ago

CLOSED

about 6 years ago
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS