Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Phosphate and CARC Coating Services

Active

Federal

Response Deadline08/11/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract calls for the application of phosphate and Chemical Agent Resistant Coating (CARC) to vehicular splash guards in full compliance with military specifications, encompassing all phases of the process including surface preparation, coating application, curing, and final inspection. The work must meet rigorous defense standards to ensure durability, corrosion resistance, and protection against chemical agents, with all procedures performed by qualified personnel using approved methods and materials. This is a small business set-aside subcontract under the SBA program, exclusively available to small businesses as defined by the North American Industry Classification System code 332812, which pertains to metal finishing. The solicitation was posted on July 27, 2026, with responses due by August 11, 2026, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Performance is expected to occur at an unspecified location, and interested parties must engage through the provided DIBBS portal to submit proposals.

General Info

Small business subcontract for military-grade phosphate and CARC coating on vehicular splash guards per defense specs.

Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATEView Agency

NAICS

332812 - Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to ManufacturersView NAICS

Place of Performance

US

Set-Aside

SBA

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 27

subcontract

Response DeadlineAug 11

Submission deadline

Response Deadline

08/11/2026, 05:00:00 PM UTCin 12 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Application of phosphate and Chemical Agent Resistant Coating (CARC) to vehicular splash guards per military specifications, including surface prep, coating, curing, and inspection.

Similar Contracts

Same NAICS industry code

Precision Machining and Fabrication of Oil Cooler Duct AssemblyThe contract calls for the manufacture of a precision duct assembly designed for use in an oil cooler system, requiring advanced metal forming, welding, and precision machining techniques to meet exacting performance standards. All fabrication processes must comply with stringent military specifications, ensuring structural integrity, dimensional accuracy, and operational reliability under demanding environmental conditions. Full traceability of materials and processes is mandated, with documentation required to verify compliance at every stage of production, from raw material sourcing through final inspection and delivery. The work is classified as a subcontract under NAICS code 332812, directed by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV, with a bid deadline of August 27, 2026. The contract emphasizes adherence to defense-grade quality controls and the ability to demonstrate compliance with applicable military standards, though the specific place of performance and point of contact are not detailed. Suppliers must possess the engineering capability and quality systems necessary to support defense-level traceability and documentation requirements without deviation.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Component Marking ServicesThe contract calls for precision marking services to apply permanent, standardized identification labels on solenoids to clearly distinguish between lead-containing and lead-free finishes in compliance with IPC/JEDEC J-STD-609 requirements. This work is essential for ensuring proper component identification throughout the supply chain, particularly for defense applications, where material compatibility and regulatory adherence are critical. The markings must be durable, legible, and applied consistently across all units to avoid misidentification during assembly, maintenance, or deployment. The solicitation is classified as a subcontract under NAICS code 332812, indicating it involves other fabricated metal product manufacturing, and is managed by the Department of Defense through its LAND SUPPLY CHAIN office. Performers are required to execute the work at the designated location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. Proposals must be submitted by August 10, 2026, following the public posting on July 28, 2026. While no specific set-aside designation is provided, bidders must be prepared to demonstrate technical capability, process control, and strict adherence to the stated standards for marking quality and traceability.

LAND SUPPLY CHAIN

POSTED

DEADLINE

Cadmium Plating and Surface Finishing ServicesThe contract entails the cadmium plating of precision-machined steel components, requiring specialized surface finishing that includes passivation to enhance durability and corrosion resistance. The work must adhere to strict hazardous material handling protocols due to the toxic nature of cadmium, ensuring all processes comply with applicable environmental and safety regulations. Comprehensive corrosion resistance testing ismandatory to verify performance under operational conditions, and the plating must meet defined aerospace or defense industry standards for reliability and longevity. Performance of this subcontract is designated for Albany, Georgia, with a response deadline of August 10, 2026, and was posted on July 28, 2026, under the NAICS code 332812 for metal coating services. The contracting entity is the Fluid Handling Division of the Department of Defense, indicating this is a critical supply requirement for defense or military systems. All work must be completed to exact technical specifications, with documentation and quality controls in place to ensure traceability and regulatory compliance throughout the plating and testing phases.

FLUID HANDLING DIVISION

POSTED

DEADLINE

Precision Manufacturing of Aircraft Structural PanelsThe contract requires the manufacture of two aircraft structural panels to strict military specifications, encompassing full production cycles from material sourcing and precision machining to final assembly and rigorous quality assurance. Compliance with configuration control and origin inspection standards is mandatory to ensure traceability and adherence to defense-grade requirements. All work must be performed to meet the technical and procedural benchmarks established for aerospace components used in critical military applications. Performance is expected at Tinker Air Force Base, Oklahoma, with a firm deadline for submissions on August 5, 2026. The contract is classified as a subcontract under NAICS code 332812, indicating focus on forging, stamping, and related structural manufacturing activities. It falls under the purview of the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with no set-aside provisions or demographic preferences applied. The solicitation is issued through the DIBBS platform, and all bidders must align with the defense supply chain’s rigorous compliance and documentation protocols.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

W0113-27CS15-Portable Laser Engraver

Solicitation # WS5800738963

The Department of National Defense requires a complete portable laser marking system for permanent engraving and marking on metallic and industrial components, to be delivered, installed, and commissioned at CFB Borden in Barrie, Ontario. The system must include the marking head, control unit, specialized software, all necessary accessories, comprehensive training for personnel, and a secure transport solution tailored for military use. This procurement is aimed at ensuring operational readiness and asset identification capabilities in the field. The solicitation, identified as WS5800738963 under NAICS code 332812, was posted on July 28, 2026, with a response deadline of August 12, 2026. The contract is managed by the Government of Canada through Public Works and Government Services, with Samuel Ford serving as the primary contracting authority. All offerings must meet technical specifications and performance standards required for deployment in a federal defense environment.

Department of Public Works and Government Services

POSTED

DEADLINE

Anodizing and Surface Treatment Services

FLUID HANDLING DIVISION

POSTED

DEADLINE

Phosphate Coating and Surface TreatmentThe contract pertains to the application of phosphate coating in accordance with specification RQ036, encompassing all stages from surface pre-treatment through coating application to final post-inspection verification ensuring full compliance with required standards. The work must be performed to meet stringent technical and quality benchmarks, with attention to consistency, durability, and adhesion of the phosphate layer to meet defense-grade requirements. This subcontract, issued by the Defense Logistics Agency under the Department of Defense, is classified under NAICS code 332812 and was posted on July 24, 2026, with a mandatory response deadline of August 3, 2026. Performance location details are unspecified, but the work is intended to support military or defense-related applications. Interested parties must submit proposals before the deadline to be considered, and all deliverables must align precisely with the technical specifications outlined in RQ036 to ensure acceptance and compliance.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Tubing and Conduit ComponentsThe contract calls for the supply of metal tubing and fittings engineered for use in aerospace hydraulic, fuel, and fluid systems, with mandatory inclusions of flaring, bending, and pressure testing to ensure performance and safety standards. All components must meet exacting industry specifications for use in high-stress, mission-critical airborne environments, and the work requires precision manufacturing capabilities to handle complex geometries and material requirements unique to aerospace applications. The scope emphasizes end-to-end fabrication and verification, ensuring each assembly is fit for immediate integration into aircraft systems without additional modification. This is a subcontract opportunity issued by the Department of Defense through DLA Aviation, with performance expected to be carried out in Coffeyville. The solicitation opened on July 24, 2026, and responses are due by July 31, 2026, at 9:00 p.m. Eastern Time. The North American Industry Classification System code 332812 identifies the category as Metal Service Centers and Other Metal Merchant Wholesalers, indicating the expectation for suppliers to provide either manufactured or value-added components beyond basic raw material distribution. Bidders must possess demonstrated experience in aerospace-grade fabrication and testing, and compliance with defense procurement standards is required, though no specific set-aside category is designated for this opportunity.

POSTED

DEADLINE

Corrosion Protection and Piping PreservationThe contract requires the application of a multi-layered corrosion protection system to underground piping, involving the sequential installation of a bitumastic primer, polymer-modified asphaltic tape wrapping, vapor barrier mastic, and aluminum cladding to ensure long-term integrity and environmental resistance. All work must be performed in accordance with industry standards for subsurface infrastructure preservation, with strict attention to material compatibility, layer adhesion, and proper coverage to prevent moisture ingress and chemical degradation in the field environment of New Delhi, India, where the project is located and where the work must be executed. The contract is classified as a subcontract under NAICS code 332812, indicating it involves specialty trade contractors focused on pipeline and structural system protection. It was posted on July 24, 2026, with a response deadline of August 11, 2026, at 8:30 AM, and is sponsored by the U.S. Embassy in New Delhi under the Department of State. The work location is specified as New Delhi, zip code 110021, and the procurement is part of broader efforts to maintain U.S. government-owned utility infrastructure in a high-heat, high-humidity climate zone requiring durable and reliable protective measures.

US Embassy New Delhi

POSTED

DEADLINE

Surface Treatment & Paint ApplicationThe contract requires the application of paint and surface finishes in strict accordance with MIL-DTL-53072 specifications, ensuring full compliance with military-grade durability and performance standards. All coatings must deliver verified corrosion resistance, validated through mandated salt spray testing, and must adhere precisely to approved military color standards to maintain consistency and operational readiness across defense assets. The work is classified as a subcontract under NAICS code 332812 and is managed by the Department of Defense through DLA Land Warren, with the place of performance designated in Warren. The solicitation was posted on July 24, 2026, and responses are due by August 13, 2026, at 7:00 PM Eastern Time. While no set-aside provisions or specific agency contact details are provided, the requirement demands technical precision and adherence to federal military specifications, making it critical for contractors to demonstrate proven experience with MIL-DTL-53072, salt spray validation protocols, and military color compliance. Performance is expected to support defense logistics and equipment maintenance operations within the Department of Defense supply chain.

DLA Land Warren

POSTED

DEADLINE

Electroplating and Surface Finishing ServicesThe contract seeks providers of electroplating and surface finishing services for aerospace components, with specific focus on processes such as cadmium plating, chrome plating, and anodizing. All work must adhere to stringent environmental, safety, and quality control standards required by the aerospace industry, ensuring compliance with federal and defense-specific regulations. The services are to be performed at a designated location in Coffeyville, with the Department of Defense acting as the overarching agency under the FA8118 AFSC PZABB office. This is a subcontract opportunity categorized under NAICS code 332812 for Metal Finishing, with a response deadline of August 8, 2026. Proposals must demonstrate capability to meet high-precision performance requirements and maintain controlled environments to prevent contamination or non-compliance. The solicitation does not specify a set-aside status or point of contact, and all submissions must be submitted through the official SAM.gov portal prior to the stated deadline to be considered.

FA8118 Afsc Pzabb

POSTED

DEADLINE

Coating and Surface Treatment ServicesThe contract requires the application of protective coatings including anodizing, priming, or painting to structural panel components, ensuring full compliance with military specifications and the strict prohibition of hexavalent chromium. The work must meet rigorous operational and environmental standards appropriate for defense-related applications, with all processes designed to enhance durability, corrosion resistance, and performance under demanding conditions. The solicitation is issued as a subcontract under the NAICS code 332812 for metal coating, enameled to metal, and heat treating activities, and is targeted at suppliers capable of delivering certified surface treatments at the designated place of performance. Performance is mandated to occur at McConnell Air Force Base with a zip code of 67221-3710, and the opportunity is managed by the ASC SUPPLIER OPER OEM DIVISION under the Department of Defense. The solicitation was posted on July 23, 2026, with a response deadline of July 31, 2026, indicating a tight turnaround for qualified vendors to submit proposals. While no set-aside information is provided, bidders must be prepared to demonstrate technical capability, regulatory compliance, and the ability to meet military-grade quality and environmental safety requirements without the use of prohibited substances. All submissions must be made through the DIBBS platform using the provided link.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → STRATEGIC ACQ PROGRAM DIRECTORATE

Same awarding agency

PANEL, VEHICULAR OPE

Solicitation # SPE7LX-26-U-9072

The contract solicitation SPE7LX-26-U-9072 is issued by the Department of Defense’s Strategic Acquisition Program Directorate for the procurement of 24 vehicular panels with NSN 2510-01-687-9931 under a Total Small Business Set-Aside, with a unit of issue per each (EA) and a total price of $24.00 per unit. Delivery is required within 89 days, FOB origin, with zero variance allowed in quantity and inspection and acceptance occurring at the destination. Packaging must strictly comply with MIL-STD-2073-1E and DLA’s Packaging Requirements, including individual packaging with QUP=001, use of designated cushioning materials to prevent damage from vibration, and proper immobilization within unit containers. Cushioning must either be die-cut NA material to protect protrusions or weather-resistant fiberboard (JC) secured with tape to each other, not the part, ensuring panels are positioned flat-side down with reinforced tape securing container flaps. Marking must adhere to MIL-STD-129 on both barrier bag and box with no special codes applied. All packaging and preservation methods are prohibited from containing mercury or mercury compounds. The contract mandates compliance with all technical and quality requirements referenced in the DLA Master List, with revisions controlled based on the solicitation issue or award date, as applicable. The solicitation closed on August 13, 2026, and was posted on July 29, 2026, with primary point of contact Theodore Misiolek.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9077

The contract pertains to the procurement of a nipple, pipe, specifically a boss type designated for use in E/I Light Armored Vehicles, identified by part number 10505358 and NSN 4730-01-157-8993, with a quantity of 89 units. The item is classified as a critical application component under the direct control of the Defense Logistics Agency and is subject to strict compliance with DLA’s Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. The item must be packaged in accordance with MIL-STD-129 and RP001 DLA Packaging Requirements, ensuring proper labeling, unit packing, and palletization, while explicitly prohibiting the use of Class I ozone depleting chemicals in any part of the product or its manufacturing process. Any substitute chemicals require prior approval unless explicitly authorized by the technical specifications. Delivery is required FOB origin within 74 days, with no tolerance for quantity variance, and inspection and acceptance occur at the destination point. The contract, identified by solicitation number SPE7LX-26-U-9077, is issued under a federal acquisition framework, with a unit of issue as a single unit, and is managed by the Strategic Acquisition Program Directorate within the Department of Defense. Contact for inquiries is Theodore Misiolek, with the response deadline set for August 13, 2026.

Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9079

This contract specifies the procurement of TAPPING SCREWS under NSN 5305-01-336-9467 with a total quantity of 48 packing units PG, each containing 50 screws, as defined by the updated unit of issue effective March 1, 2023. The item is identified by DAIMLER TRUCK NORTH AMERICA LLC part number 23-11657-306 and is being procured under solicitation SPE7LX-26-U-9079 as a Total Small Business Set-Aside. Delivery is required within 90 days FOB origin with no variance permitted in quantity and inspection and acceptance to occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA’s packaging requirements, including specific methods for preservation, wrapping, and intermediate containment, with marking conforming to MIL-STD-129 and no special marking codes applied. Sampling and verification protocols must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required for acceptance unless otherwise stated, and critical, major, and minor attributes must be assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The Certificate of Conformance procedure is authorized unless overridden by a Quality Assurance Letter of Instruction, and non-accepted supplies must have government identification removed. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition type.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

Solicitation # SPE7LX-26-U-9076

This contract pertains to the procurement of NUT, CASTLE with NSN 5310011547683 and part number 10501146, under solicitation SPE7LX-26-U-9076, issued by the Department of Defense’s Strategic Acquisition Program Directorate. A total quantity of 252 units is required at a unit price of $252.00, with a total contract value of $63,504, delivered FOB origin within 108 days. The items are subject to strict packaging standards per ASTM D3951 and MIL-STD-129, with palletization conforming to DLA’s packaging requirements, and all technical and quality specifications referenced via the DLA Master List of Technical and Quality Requirements must be followed, superseding any conflicting standards. Critical application status applies, and no ozone-depleting chemicals may be used in manufacturing or packaging, with substitutes needing prior approval unless explicitly authorized by the specification. The contract prohibits any variance in quantity—zero percent plus or minus—and inspection and acceptance both occur at the destination. The unit of issue is each (EA), and packaging must reflect the specified unit of issue and quantity per unit pack as outlined in the contract. This solicitation is classified as a DLA Direct, CONUS procurement, with the government reserving the right to adjust purchase quantities and not guaranteeing full procurement by the IDC. All markings, labeling, and documentation must comply with federal procurement directives, including the removal of government identification from non-accepted supplies. The point of contact for inquiries is Theodore Misiolek, with responses due by August 13, 2026. The purchase request number is 1000237130, and the NSN and part number must be used consistently in all shipping and documentation.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

SPRING-ASSIST, HOOD

Solicitation # SPE7LX-26-U-9073

The contract is for 461 units of a Spring-Assist Hood under NSN 5340-01-603-1531, with a delivery deadline of 116 days after order. It is a total small business set-aside solicitation issued by the Department of Defense’s Strategic Acquiring Program Directorate, with the solicitation number SPE7LX-26-U-9073 and NAICS code 332722. The solicitation was posted on July 29, 2026, and responses are due by August 13, 2026. Technical and quality requirements referenced in this procurement are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA standards, and any non-accepted supplies must have all government identification removed prior to return. The primary point of contact is Theodore Misiolek, reachable via email and phone, and the procurement is administered through the DIBBS platform.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

CLIP, RETAINING

Solicitation # SPE7LX-26-U-9075

The contract pertains to the procurement of 12 units of CLIP, RETAINING with NSN 5340-01-692-7326 under solicitation SPE7LX-26-U-9075, which is a Total Small Business Set-Aside as defined by FAR 19.5. The requirement is subject to technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance determined by the version in effect on the solicitation issue date or award date depending on acquisition size. Packaging must meet DLA specifications, and any non-accepted supplies must have government identification removed prior to return. The item involves technical data subject to export control under either ITAR or EAR, restricting disclosure to foreign persons regardless of location and requiring prior government authorization for any export activity. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and authorized access through the DLA questionnaire may handle this technical data. The delivery schedule requires fulfillment within 116 days after contract award, with performance limited to U.S. locations and no specified city or state for delivery. The solicitation was posted on July 29, 2026, with responses due by August 13, 2026, and falls under NAICS code 332510 for industrial machinery manufacturing. Primary point of contact is Theodore Misiolek, reachable via email and phone provided, under the Department of Defense’s Strategic Acquisition Program Directorate.

Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

WINDOW, VEHICULAR

Solicitation # SPE7LX-26-U-9070

The contract specifies the procurement of 121 vehicular windows under NSN 2510-01-617-8631 and Daimler Truck North America P/N 18-57409-003 through a DLA Direct, CONUS delivery arrangement with a delivery window of 89 days FOB origin. The quantity is fixed with no variance allowed, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E, using QUP 001, preservation method 10, and unit container F2, with marking strictly following MIL-STD-129. The windows must be covered with an easily removable protective film to prevent scratches, and cushioning materials must fully immobilize the product against all impact types, including edge, corner, and side drops, with specialized cut-outs for protrusions. Acceptable cushioning includes MIL-PRF-26514 Type I Class 2 Grade B or C flexible polyurethane foam, or equivalent materials that meet shock absorption and creep resistance requirements determined by static stress and density. Package design must satisfy ASTM D4169 Distribution Cycle 18, Assurance Level II, Acceptance Criteria 3, or provide validated military packaging documentation per MIL-STD-2073-1. Special markings must include FRAGILE, ARROW UP, GLASS, and GLASS DO NOT DROP per MIL-STD-129 and ASTM D5445, and containers must support mechanical handling to avoid discrepancies. Mercury and mercury compounds are strictly prohibited in all packaging and preservation components. The solicitation, issued under SPE7LX-26-U-9070, is a total small business set-aside with a response deadline of August 13, 2026, and is governed by the DLA Master List of Technical and Quality Requirements referenced in RP001 and RA001, with packaging and technical compliance controlled by the revision in effect on the solicitation issue date.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 20 hours ago

DEADLINE

BRACKET, MOUNTING

Solicitation # SPE7LX-26-U-9071

The contract pertains to the procurement of a mounting bracket identified by NSN 5340014817021 and part number BTS/RT35R, with a quantity of 201 units to be delivered FOB origin within 116 days. The acquisition is under DLA Direct, CONUS coverage and is structured as a total small business set-aside under NAICS code 332510. Packaging must comply with DLA’s master requirements, specifically RP001 and SPE7LX-26-U-9071, mandating adherence to MIL-STD-129 for marking and labeling, and ASTM D3951 for commercial packaging unless the item is hazardous, in which case Fed-Std-313 and TQ requirement IP025 apply. All DLA technical and quality requirements referenced by R or I numbers in the DLA Master List supersede any conflicting commercial standards. The unit of issue is each, with zero variance allowed in quantity, and inspection and acceptance occur at destination. Packaging must be palletized per RP001, and the unit of issue and quantity per unit pack must match contract specifications exactly. Deliveries are subject to government identification removal from non-accepted supplies as per RQ011. The solicitation number is SPE7LX-26-U-9071, issued July 29, 2026, with responses due August 13, 2026, and the point of contact is Theodore Misiolek with the Strategic Acquisition Program Directorate.

Hardware Manufacturing

POSTED

about 20 hours ago

DEADLINE

MOTOR, WINDSHIELD WIPER

Solicitation # SPE7LX-26-U-9078

This contract pertains to the procurement of an electric windshield wiper motor with part number 87729518 and NSN 2540015686698, issued under solicitation SPE7LX-26-U-9078 by the Defense Logistics Agency for CNH Industrial America LLC. The requirement is for 41 units at a unit price of $41.00, totaling $1,681.00, with delivery required within 81 days FOB origin and no variance allowed in quantity. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, and packaging must adhere strictly to DLA standards including MIL-STD-129 labeling and RP001 palletization requirements, with hazardous materials regulated under FED-STD-313 and TQ requirement IP025 while non-hazardous items follow ASTM D3951 unless overridden by DLA requirements. The use of Class I ozone-depleting chemicals is explicitly prohibited, and any substitute chemicals must be pre-approved unless already authorized by specification. Inspection and acceptance occur at the destination, and the unit of issue is each (EA), consistent with DoD standards. The contract is classified as DLA Direct, CONUS, and the point of contact for inquiries is Theodore Misiolek of the Department of Defense’s Strategic Acquisition Program Directorate.

Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 20 hours ago

DEADLINE

MIRROR, REARVIEW

Solicitation # SPE7LX-26-U-9080

The contract pertains to the procurement of a rearview mirror identified by NSN 2540-21-878-9053 and part numbers 10503842 and 6966354, supplied by General Dynamics Land Systems Canada. A total quantity of 330 units is required at a unit price of $330.00, with delivery terms set at FOB origin and a delivery window of 81 days. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951. Packaging must comply with DLA-specific protocols outlined in RP001, and all items must be labeled and marked per MIL-STD-129. If the item is classified as hazardous under FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging per ASTM D3951 is acceptable, but only as long as it does not conflict with the DLA requirements. No variance in quantity is permitted—zero percent plus or minus—and inspection and acceptance occur at the destination. The solicitation number is SPE7LX-26-U-9080, issued under the NAICS code 336390 by the Department of Defense’s Strategic Acquisition Program Directorate, with Theodore Misiolek as the primary point of contact. The item is designated as a critical application component, and all delivery documentation must reflect the authorized DoD unit of issue.

Other Motor Vehicle Parts Manufacturing

POSTED

about 20 hours ago

DEADLINE

PLATE, MOUNTING

Solicitation # SPE7LX-26-U-9074

The contract pertains to the procurement of a mounting plate identified by NSN 5340015763107 and part number TDA A44 3299M5915, with a quantity of seven units to be delivered FOB origin within 116 days. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications including ASTM D3951, and must be strictly adhered to. The use of Class I ozone-depleting chemicals is strictly prohibited, and any alternative substances must be submitted for approval unless explicitly authorized by the specification. Packaging must comply with MIL-STD-129 for marking and labeling, and palletization must follow DLA’s RP001 requirements; if the item is classified as hazardous per FED-STD-313, it must be packaged in accordance with TQ requirement IP025, otherwise commercial packaging per ASTM D3951 is acceptable though subordinate to DLA standards. Inspection and acceptance occur at the destination, with no variance allowed in quantity. The contract is issued under solicitation SPE7LX-26-U-9074 as a total small business set-aside under NAICS code 332722, with the Department of Defense as the contracting agency and Theodore Misiolek as the primary point of contact. The unit of issue is each, and pricing is confirmed at $7.00 per unit.

Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 20 hours ago

DEADLINE

Commercial Off-the-Shelf (COTS) Shaft Supply and DeliveryThe contract seeks the supply, packaging, marking, and delivery of a precision-machined shoulderered shaft identified by NSN 3040012089288, requiring full compliance with military standards. The contractor may serve as either the manufacturer or distributor, with the expectation that the item qualifies as a commercial off-the-shelf solution. The work must be completed in accordance with all applicable defense specifications, ensuring the component meets the necessary performance, dimensional, and material requirements for military use. The solicitation was posted on July 28, 2026, with proposals due by August 12, 2026. It is classified as a subcontract under NAICS code 332999, which covers other fabricated metal product manufacturing. The contracting authority is the Strategic Acq Program Directorate within the Department of Defense. The place of performance and point of contact details are unspecified, indicating that delivery terms will likely be defined post-award. All work must be conducted in alignment with federal procurement regulations and military logistics protocols, with no set-aside provisions designated for small or disadvantaged businesses.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE