Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →

This Combined Synopsis/Solicitation opportunity from Department Of Defense was posted on August 20, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Tunable Wavelength Laser System

Closed
FA860126Q0114Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 334516
New
SLED
NDSU - Dynamic Mechanical Analyzer
Solicitation # SRC000482
North Dakota State University (NDSU) is soliciting bids under solicitation SRC000482 for a Dynamic Mechanical Analyzer (DMA) system to support polymer testing research on electrically responsive surface textures for autonomous platforms. The required system must support dynamic mechanical analysis in bending, tension, and compression modes, featuring a frequency range of 2 x 10-8 Hz to 200 Hz, a temperature range of -170 C to +600 C, and a normal force sensor range of 0.001 N to 50 N. Optional rotational or torsional torque capabilities may be offered separately and will not be included in the base bid evaluation. The equipment is to be delivered FOB Destination to R1A Laboratories in Fargo, North Dakota, where final acceptance will be contingent upon successful installation, functional demonstration, and the completion of required training. The contract will be awarded to the lowest responsive and responsible bidder who meets all mandatory technical specifications. Bidders must submit their responses through the NDBuys portal by November 4, 2026, including a completed Cost Proposal Form and a Technical Compliance Form. The base bid must be comprehensive, covering all hardware, software, delivery, installation, and warranty costs. All communications must be directed exclusively to the Procurement Officer, Casie Ewalt. Awardees must comply with North Dakota open records laws and non-discrimination policies, and they must certify that they are not proposed for federal debarment or suspension.

POSTED

about 6 hours ago

DEADLINE

in 8 days
NAICS: 334516
New
Federal
6632--FY27 Microbial Incubation ID and Susceptibility CPT
Solicitation # 36C24827Q0029
The Department of Veterans Affairs is conducting market research through a Sources Sought Notice to identify qualified vendors capable of providing a comprehensive Microbial Incubation, Identification (ID), and Antimicrobial Susceptibility Testing (AST) system for the James A. Haley Veterans Hospital in Tampa, Florida. The requirement includes the delivery and installation of two redundant analyzers—one large capacity and one medium capacity—along with incubators, middleware, and hardware and software for up to ten workstations. Technical specifications require a bi-directional, bar-coded computer interface compatible with VA laboratory systems and specific sensitivity and resolution standards for MALDI TOF systems. The scope also encompasses a continuous supply of reagents, calibrators, and consumables, which must have a minimum shelf life of six months upon delivery. Interested parties must submit a brief capability statement by November 10, 2026, including their SAM Unique Entity ID, socioeconomic status, and evidence of their ability to meet the functional requirements under NAICS code 334516. Respondents should identify available contract vehicles, such as GSA FSS or NASA SEWP, and provide estimated timelines for delivery, validation, and software implementation. The government will evaluate submissions based on technical specifications, manufacturer reputation, and the ability to provide a tiered pricing structure for cost-per-test (CPT) models. This notice is for planning purposes only and does not constitute a formal solicitation; however, it establishes strict requirements for data security, NARA-compliant data destruction, and mandatory personnel training for any future awarded contractor.
248-NETWORK Contract Office 8 (36C248)

POSTED

about 15 hours ago

DEADLINE

in 14 days

AI Contract Overview

Show more

The Department of the Air Force, through AFLCMC/PZIBA, is soliciting a firm-fixed-price contract for a Picosecond Tunable Laser System to be used at the Air Force Institute of Technology (AFIT) for laser spectroscopy and the calibration of hyperspectral sensors. This unrestricted, full and open competition is conducted under NAICS code 334516. The required system must be tunable over 400-14,000 nm, featuring a pulse width of less than 1000 picoseconds and pulse energy of 1 micro-Joule or more across the spectral range. The contractor is responsible for the complete delivery, including packaging, customs clearances, and all transportation and onsite setup at Wright-Patterson AFB, Ohio. Additionally, the awardee must provide on-site training by a factory certified technician and a manufacturer warranty of at least one year. The contract will be awarded on a Lowest Price Technically Acceptable (LPTA) basis to a responsible offeror who meets all technical specifications of the Statement of Work and provides the lowest total evaluated price. Proposals must be submitted by September 21, 2026, 11:00 AM EDT, and must include a technical proposal with supporting manufacturer data and a separate price proposal. Key compliance requirements include an active SAM registration, CMMC Level 1 certification recorded in the Supplier Performance Risk System, and adherence to the Buy American Act. The period of performance is no later than six months after the contract award, with invoicing processed through Wide Area Workflow.

General Info

Air Force seeks vendors for picosecond tunable laser via market research; submissions due August 12, 2026.

NAICS

334516 - Analytical Laboratory Instrument Manufacturing

Place of Performance

Wright Patterson AFB, OH, 45433, USA

Set-Aside

NONE

Documents

4

FA860126C0114 Roosevelt Tunable Laser Model

PDF, High priority: read this firstcontract-document
High

FAR 52.212-3 Offeror Representations and Certifications - Commercial Products and Services

PDF, High priority: read this first5 pages · reps-and-certs
High

Sources Sought: Picosecond Tunable Laser Model Instructions to Offerors

PDF, High priority: read this firstsources-sought
High

SOW Picosecond Tunable Laser Model 2026-07-24

PDF, High priority: read this firstsow
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseClosed
Posted

Sources Sought

Type Changed

Sources Sought → Combined Synopsis

Response Deadline

Deadline has passed

Submission Closed

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → FA8601 Aflcmc Pzio
Contacts2 people available
OfficeWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Office AddressWRIGHT PATTERSON AFB, OH, 45433-5344, USA
Contacts

Full Description

Show more

Combined Synopsis/Solicitation


Tunable Wavelength Laser System


Solicitation Number: FA8601-26-Q-0114


Notice Type: Combined Synopsis/Solicitation (RFQ)


Issuing Office: AFLCMC/PZIBA


Posted Date: August 20, 2026


Response Date: September 21, 2026, 11:00 AM EDT


Set-Aside: Unrestricted (Full and Open Competition)


Classification Code (PSC): 6640


NAICS Code: 334516 — Analytical Laboratory Instrument Manufacturing


Small Business Size Standard: 1,000 employees


Description


This is a combined synopsis/solicitation for commercial products prepared in accordance with Revolutionary Federal Acquisition Regulation Overhaul (RFO) Part 12. This announcement constitutes the only solicitation; offers are being requested and a separate written solicitation will not be issued. This solicitation incorporates provisions and clauses in effect through the RFO (effective April 17, 2026) and the Revolutionary Defense Federal Acquisition Regulation Supplement (RDFARS) as of the date of issuance.


The Department of the Air Force intends to award a firm-fixed-price contract for a TUNABLE WAVELENGTH LASER SYSTMEN in accordance with the attached Statement of Work (SOW), on a Lowest Price Technically Acceptable (LPTA) basis. The Schedule of Supplies, place of performance, delivery information, and the full list of applicable provisions and clauses are set forth in the attached SF 1449 and solicitation. Award is subject to the availability of funds.


Basis for Award


Award will be made to the responsible offeror whose proposal:


  • Conforms to this combined synopsis/solicitation;
  • Receives an “Acceptable” rating on Technical Capability; and
  • Contains the lowest Total Evaluated Price (TEP), determined fair, reasonable, and not unbalanced.

Technical Capability. Single pass/fail factor. To be rated Acceptable, the proposal must demonstrate that the offered item meets or exceeds every requirement of the SOW. Each proposal shall:


  • Identify the proposed manufacturer, make, and model;
  • Provide manufacturer technical data, datasheets, or specification sheets verifying compliance with each SOW characteristic (temperature range, aperture/cavity dimensions, emissivity, stability, accuracy, control interface, power, and any other parameter specified); and
  • Identify any deviations or exceptions to the SOW.

A proposal will be rated Unacceptable if it fails to demonstrate compliance with any SOW requirement, takes material exception, or lacks sufficient technical detail to permit evaluation. Restating a requirement without supporting data is insufficient.


Past Performance and Responsibility. Prior to award, the Contracting Officer may perform a responsibility determination under RFO Part 9, including review of the offeror’s record in the Contractor Performance Assessment Reporting System (CPARS) and the Supplier Performance Risk System (SPRS). Adverse findings may render an offeror nonresponsible.


The Government reserves the right to award without discussions or to make no award.


Key Information


  • Requirement: Tunable Wavelength Laser System per SOW dated 24 July 2026
  • Contract Type: Firm-Fixed Price
  • Period of Performance: NLT 6 months after contract award
  • Delivery: FOB Destination; inspection and acceptance at destination

Cybersecurity Maturity Model Certification (CMMC)


Per RDFARS 252.204-7021, this acquisition requires CMMC Level 1 (Federal Contract Information only). Offerors must have a current CMMC Level 1 (or higher) self-assessment recorded in the Supplier Performance Risk System (SPRS) at the time of award. Waivers, grace periods, and Plans of Action and Milestones (POA&Ms) are not permitted.


Buy American Act and Trade Agreements


This acquisition is subject to the Buy American Act and applicable trade agreements as implemented in the RFO and RDFARS. Offerors shall identify the country of origin for the offered end product and any qualifying components in their Reps and Certs. Domestic or qualifying/designated-country end products are required unless an authorized exception applies.


Submission Instructions


  • Deadline: September 21, 2026, 11:00 AM EDT
  • Subject Line: FA8601-26-Q-0114, TUNABLE WAVELENGTH LASER SYSTEM
  • Submit via email to both:
    1. Officer: Candice Snow — contact@example.gov

    1. Specialist: Brian Algeo — contact@example.gov
  • Format: Single email ≤ 5 MB; attachments must be .pdf, .docx, or .xlsx. Compressed files (e.g., .zip) will be filtered and are not permitted.
  • Confirmation: A receipt confirmation will be sent within 24 hours; if not received, contact the points of contact above.

Proposal Content Requirements


Proposals shall consist of two parts — a Technical Proposal and a Price Proposal — and shall provide sufficient detail to demonstrate compliance with the SOW. Do not merely restate the Government’s requirements. Each proposal shall include:


  1. Company name, address, SAM Unique ID, CAGE Code, and TIN
  2. Point of contact name, phone, and email
  3. Proposal number, date, and validity period
  4. Technical description with manuals, datasheets, or literature evidencing compliance with each SOW requirement
  5. Completed Offeror Representations and Certifications
  6. Itemized firm-fixed pricing with extended totals; FOB Destination (all shipping included); Net 30; no progress payments

Important Notices


  • SAM Registration: Offerors must maintain an active registration in the System for Award Management at https://www.sam.gov for the life of the contract.
  • Invoicing: Invoices shall be submitted electronically through Wide Area Workflow – Receipt and Acceptance (WAWF-RA) at https://wawf.eb.mil/.

Questions


Questions shall be submitted via email to both points of contact no later than 8 September 2026, 11:00 AM EDT, with the solicitation number in the subject line. Late questions may not be considered.


Attachments


  1. Solicitation – FA8601-26-Q-0114
  2. Statement of Work (SOW)
  3. Offeror Representations and Certifications

More opportunities from Department Of Defense → FA8601 Aflcmc Pzio

Same awarding agency

NAICS: 334516
New
Federal
Intent to Sole Source: AFIT - High Finesse WS8-2 Wavemeter
Solicitation # FA860127Q0014
The United States Air Force, through AFLCMC/PZIBA, intends to award a firm fixed price sole source contract to Toptica Photonics Inc. for the acquisition of a High Finesse WS8-2 wavemeter, including an eight-channel switch and an absolute Rb reference source. This equipment is destined for the Air Force Institute of Technology at Wright Patterson AFB, Ohio, to support physics research in spectroscopy, laser engineering, non-linear optics, and radiometry. The procurement is classified under NAICS code 334516 for Analytical Laboratory Instrument Manufacturing. Toptica Photonics Inc. was identified as the only responsible source capable of meeting the critical requirement for a wavelength measurement precision of less than 2 MHz, a specification that other available vendors cannot guarantee. The required system must feature a wavelength measurement range of 390-1180 nm, a measurement resolution of 200 kHz, and the ability to measure up to eight channels simultaneously. Technical specifications include a USB 2.0 interface, a measurement speed of 1 kHz, and a calibration source with an absolute accuracy of plus or minus 0.5 MHz. The award will include all necessary hardware, firmware, software, installation, and operational training. Interested parties may submit capability statements or exceptions to the sole source intent to Dametria Walder by November 6, 2026. Delivery to Wright Patterson AFB requires adherence to specific base access and commercial vehicle inspection protocols at Gate 16A.
Analytical Laboratory Instrument Manufacturing

POSTED

5 days ago

DEADLINE

in 10 days
View Details
NAICS: 238220
New
Federal
Repair Mechanical Systems IDIQ (FY 27-32)
Solicitation # FA860126R0016
Solicitation FA860126R0016 is a 100% small business set-aside Indefinite Delivery/Indefinite Quantity (IDIQ) contract for the repair of mechanical systems at Wright-Patterson Air Force Base, Ohio. With a maximum contract ceiling of $98,795,000, the requirement covers an ordering period from February 26, 2027, to August 24, 2033, including a six-month option. The scope of work involves providing all labor, supervision, equipment, and materials for the repair, replacement, and upgrade of HVAC and plumbing systems, as well as incidental construction and design-build tasks. A specific seed project is included for the demolition of an air-cooled chiller and the replacement of a rooftop air handling unit at Building 20641. The government will utilize a Lowest Price Technically Acceptable (LPTA) source selection process, evaluating proposals based on a prior experience and self-performance compliance gate followed by a pass/fail assessment of the management approach and project planning and execution. Pricing is based on a coefficient model applied to RSMeans bare costs. Awardees must provide 100 percent performance and payment bonds and adhere to Davis-Bacon Act wage determinations for Greene and Montgomery Counties. All proposals must be submitted electronically via the Procurement Integrated Enterprise Environment (PIEE) by November 12, 2026.
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

7 days ago

DEADLINE

in 16 days
View Details
NAICS: 238210
New
Federal
Repair Electrical Systems
Solicitation # FA860126R0017
The United States Air Force, AFLCMC/Operational Contracting Branch, is soliciting proposals for an Indefinite Delivery Indefinite Quantity (IDIQ) contract to provide inspection, diagnostics, and renewal of low- and medium-voltage electrical systems at Wright-Patterson Air Force Base, Ohio. The scope of work includes the modernization or replacement of transformers, switchgear, panelboards, motor control centers, emergency generator assemblies, and fire alarm networks, as well as work on overhead and underground distribution systems and the integration of Direct Digital Controls for HVAC and building automation. The prime contractor is expected to manage approximately 25 concurrent projects and 50 projects annually, providing temporary power during outages and ensuring compliance with all current codes and Installation Facility Standards. This small business set-aside acquisition, under NAICS 238210, has an overall contract maximum of 97.9 million dollars. Award will be based on a Lowest Price Technically Acceptable (LPTA) process, requiring proposals to pass a compliance gate regarding US ownership and prior experience before technical and price evaluations. The contract utilizes a coefficient-based pricing model based on RS Means bare costs. Key requirements include a minimum blanket bond capacity of 5 million dollars, adherence to Davis-Bacon wage determinations for Montgomery and Greene Counties, and compliance with NIST SP 800-171 for protecting Controlled Unclassified Information. Proposals must be submitted electronically via the PIEE Solicitation Module.
Electrical Contractors and Other Wiring Installation Contractors

POSTED

7 days ago

DEADLINE

in 16 days
View Details

Find Active Opportunities Like This

Get AI-powered intelligence on the opportunities still open

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS