Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN, GROOVED, HEADED

Active
SPE4A7-26-T-590MFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

General Info

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

7 FRANKFORD AVE, ANNISTON, AL, 36201-5021, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-590M.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Brad Ingram
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,GROOVED,HEADED
PIN,GROOVED,HEADED
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
PEARSON ENGINEERING LIMITED K0824 P/N PE21833
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017539753 0001 EA 2.000
NSN/MATERIAL:5315997609954
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
SPE4A7-26-T-590M
SECTION B
PR: 7017539753 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
MARKFOR
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
M/F: (TCN) W31G1Y619500V9
RDD: 253
PROJ: TP 1
SUPP ADD: W31G1Y SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VE
Need Ship Date:00/00/0000 Original Required Delivery Date:07/17/2026
SPE4A7-26-T-590M
SECTION B
PR: 7017539753 PRLI: 0001 CONT’D
SPE4A7-26-T-590M NSN/Part Number: 5315-99-760-9954 Quantity: 2 EA Purchase Request: 7017539753QTY: 2 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
WIRE FABRICContract SPE8E4-26-T-1908 specifies the procurement of 10 rolls of steel welded wire fabric, each roll measuring 60 inches wide and 150 feet long, with a square mesh of 6 inches by 6 inches and filament size of 0.1920 inches, featuring unfinished edges. The product must comply with ASTM A1064/A1064M Revision dated April 15, 2024, and is subject to technical and quality requirements from the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over all other standards including ASTM D3951. Each shipment requires a Certificate of Quality Compliance or Mill-Material Certification, with copies provided to both the recipient and the DLA Troop Support Contracting Officer. Sampling follows MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are verified at specified levels. Packaging must conform to MIL-STD-129 and DLA Packaging Requirements RP001, with palletization and unit packing as defined, while transport and delivery are governed by DLA procedural notes. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with delivery due 167 days after contract award under FOB Origin terms, no quantity variance permitted, and inspection and acceptance occurring at the destination. The purchase request number is 7017585539, with the original required delivery date of February 18, 2027, and a need ship date of January 18, 2027.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 3 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
RETAINER, CYLINDER P
ASC COMMODITIES DIVISION

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLEThe contract pertains to the procurement of a PIN STRAIGHT HEADLE with NSN 5315-01-717-7767, quantity one, under solicitation SPE4A6-26-T-08ZK, issued by the Defense Logistics Agency’s ASC Commodities Division under the Department of Defense. The item is subject to a 20-day delivery requirement and is classified under NAICS code 332618. The solicitation was posted on July 21, 2026, with a response deadline of July 29, 2026, and the point of contact is Christina Pyle, reachable via email and phone provided. The technical data associated with this item is subject to export controls under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure to foreign persons, regardless of location. Only DLA contractors holding an approved U.S./Canada Joint Certification Program certification, who have completed mandatory training on handling DOD export-controlled data and submitted the required questionnaire, may access this information. DFARS 252.225-7048 governs the handling of this data, and the place of performance is specified as Mechanicsburg, Pennsylvania, 17050-2411.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
DOOR, TROUGHThe contract pertains to the procurement of one unit of a door and trough assembly identified by NSN 4010-01-584-6194 and part number 5251292, sourced from ED ETNYRE & CO. The item is a wire rope assembly with no shelf life requirement and must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must adhere to MIL-STD-2073-1E with specific procedures for preservation, including preservative method 10, clean and dry conditions, and no cushioning material. Marking requirements follow MIL-STD-129, and palletization must meet DLA Packaging Requirements for Procurement. The delivery point is FOB origin with inspection and acceptance occurring at destination, and no quantity variance is permitted. The required delivery date is November 17, 2026, with a lead time of 110 days from order, and the shipment is directed to DLA Distribution San Joaquin at Tracy, California. The solicitation number is SPE4A5-26-T-303Y, issued under a federal procurement, with the point of contact being Hien-Van Trinh of the Department of Defense’s ASC Supplier Operation OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLEThe contract pertains to the procurement of one straight headle pin with NSN 5315-01-692-3261 through solicitation SPE4A6-26-T-08YH issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within five days of award, and the item is subject to stringent quality and compliance standards including CMMC Level 2 certification for the third-party assessment organization involved. Technical and quality requirements referenced in the DLA Master List govern the specification, with sampling procedures mandated to follow MIL-STD-1916 or an approved zero-based plan, assigning verification levels or AQLs based on attribute criticality, and requiring zero non-conformances for acceptance unless otherwise stated. Export control provisions under ITAR or EAR apply to any technical data associated with the item, restricting access to contractors holding approved JCP certification, having completed required DLA training, and receiving explicit authorization. Packaging, inspection, and marking requirements are strictly defined including the removal of government identification from non-accepted items and bare item marking per RQ017. The point of contact for inquiries is Christina Pyle, and performance is located in N Stonington, Connecticut, with responses due by July 29, 2026.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLEThe contract is for one straight headle pin with NSN 5315-01-725-1769, issued under solicitation SPE4A6-26-T-08ZM by the Defense Logistics Agency’s ASC Commodities Division. The item must be delivered within 20 days after contract award and is subject to multiple technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Packaging must conform to DLA standards, and any non-accepted supplies must have government identification removed. The item requires physical identification or bare item marking per specified criteria. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with an approved US/Canada Joint Certification Program certification, who have completed required DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. The place of performance is Mechanicstown, Pennsylvania, with the primary point of contact being Christina Pyle, reachable via email and phone as listed.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract pertains to the procurement of one straight-headed pin with NSN 5315-01-692-6107, supplied by WING INFLATABLES INC under part number A3020287, under solicitation SPE4A0-26-T-3979. Delivery is required within five days FOB origin, with no tolerance for quantity variance, and both inspection and acceptance occur at the destination. The item must be packaged in compliance with MIL-STD-2073-1E, marked in accordance with MIL-STD-129, and palletized per DLA packaging requirements, with no special marking specified. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and undefined attributes are treated as major. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is to be shipped to the Distribution Management Office at Camp Kinser, with transportation subject to DLAD procedural notes C19 and C20. The original required delivery date is July 16, 2026, and the contract is classified under NAICS code 332618 with the Department of Defense as the procuring agency.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLEThe contract pertains to the procurement of one Straight Headle Pin with NSN 5315-01-722-3661 under solicitation SPE4A6-26-T-08ZH, with a required delivery within five days of award. The item is subject to stringent technical and quality requirements referenced from the DLA Master List, including specific packaging, inspection, and marking standards such as RQ009, RQ011, and RQ017, which govern acceptance, removal of government identification from non-accepted items, and physical identification of bare components. Sampling must follow MIL-STD-1916 or ASQ H1331, Table 1, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are treated as major, and zero non-conformances are required unless otherwise stated. The vendor must be certified as a CMMC Level 2 C3PAO to meet cybersecurity maturity requirements. Technical data associated with the item is controlled under ITAR or EAR, prohibiting export without prior authorization, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of mandatory DOD export control training, and formal DLA authorization. The solicitation was posted on July 21, 2026, with responses due by July 29, 2026, and performance is designated for N Stonington, Connecticut, under the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract pertains to the procurement of 7 straight-headed pins identified by NSN 5315-01-648-0317 under solicitation number SPE4A6-26-T-08FW, issued by the Department of Defense’s ASC Commodities Division. The delivery deadline is 171 days after order placement, and responses must be submitted by July 29, 2026, with the solicitation posted on July 21, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The place of performance is specified as New Cumberland, PA, 17070-5002, and the primary point of contact is Sarah Henderson at sarah.henderson@dla.mil. Government identification must be removed from any non-accepted supplies, and compliance with DLA packaging requirements is mandatory. The NAICS code 332618 indicates the product falls under miscellaneous fabricated metal product manufacturing.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,The contract pertains to the procurement of a single-leg wire rope assembly with part number 901-220-958-006 and NSN 4010-01-560-1710, for a quantity of seven units, under solicitation SPE4A5-26-T-298Z. The item is classified as a critical application component, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede any conflicting standards. The item must be marked and identified per RQ017, with no unique identification required per the service customer’s directive. Packaging and labeling must comply with MIL-STD-129 and ASTM D3951, subject to precedence of DLA requirements, and palletization must adhere to RP001. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; attributes are classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract mandates delivery FOB origin within 171 days, with inspection and acceptance occurring at the destination. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is January 17, 2027, with an original delivery deadline of June 29, 2027. No quantity variance is permitted, and transportation logistics are governed by DLAD procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASEThe contract pertains to the procurement of 1,277 units of a PIN, QUICK RELEASE component with NSN 5315-01-490-7325 under solicitation SPE4A6-26-T-08TH. Delivery is required within 49 days from the contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservative methods, wrapping, and unit containment standards. Marking is to adhere to MIL-STD-129 without special codes, and palletization must follow DLA packaging requirements. The item is to be delivered to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, as specified for both transportation and freight shipping. The contract incorporates all technical and quality requirements referenced in the DLA Master List, with revisions controlled by the solicitation issue date. The unit of issue is each, priced at $1,277.00 per unit, with total contract value reflecting full quantity. The required ship date is July 21, 2026, and the original delivery date is October 14, 2026. The primary point of contact is Susan Barlow, and the NAICS code is 332618.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract specifies the procurement of nine straight headed pins with part number 5315-01-718-2055 under solicitation SPE4A6-26-T-08RH, with a required delivery within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced through R numbers, with applicable revisions controlled by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. Items must be physically marked per RQ017 requirements, and sampling is mandated to follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The technical data associated with this item is subject to export control under ITAR or EAR, restricting access and disclosure to foreign persons regardless of location, and only contractors approved under the US/Canada Joint Certification Program with verified training and DLA authorization may handle the data. All distribution and handling must comply with DFARS 252.225-7048. The contract falls under NAICS code 332618, is managed by the Department of Defense’s ASC Commodities Division, and solicitations are processed through DLA’s eProcurement portal with contact information provided for primary inquiries.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 336413
New
DIBBS
LINER, ACTUATORThe contract pertains to the procurement of LINER, ACTUATOR with part number 292340, sourced from Linear Motion LLC, and also includes alternate suppliers Ontic Engineering & Manufacturing Inc and Mistequay Group Ltd with part number CA67818-001. The item is designated as a critical application item and is governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which override any other referenced standards. The contract mandates adherence to MIL-STD-1916 or ASQ H1331 for sampling, with zero non-conformances required unless otherwise specified, and applies specific verification levels and AQLs for critical, major, and minor attributes. Configuration changes require formal engineering change proposals or variance requests, and all non-accepted supplies must have government identification removed prior to return. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following DLA’s RP001, and all items must be clearly marked as per RQ017. Delivery is FOB origin, with inspection and acceptance occurring at destination after a 170-day delivery window, and the quantity is fixed at 14 units with no variance permitted. The unit price is $14.00, totaling $196.00, and the NSN is 1680-00-492-0817. The required delivery date is September 22, 2027, with a need ship date of January 17, 2027. All shipments must be routed to DLA Distribution Depot Hill at Hill AFB, Utah, following DLAD procedural notes C19 and C20 for transportation and first destination logistics.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
GROMMET, NONMETALLICThe contract is for the procurement of 2 nonmetallic grommets with NSN 5325-01-481-1737 and part number 863-000613, issued under solicitation SPE4A7-26-T-590K by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 20 days of award, FOB origin, with no quantity variance permitted, and inspection and acceptance will occur at the destination. All packaging must comply with ASTM D3951 and MIL-STD-129 labeling standards, with precedence given to the DLA Master List of Technical and Quality Requirements over ASTM standards. The unit of issue is each, with a fixed price of $2.00 per unit, totaling $4.00. Packaging must follow RP001 DLA packaging requirements and be palletized accordingly. Shipments must be sent via traceable freight, explicitly prohibiting parcel post, and delivered to the specified military logistics address at March ARB, CA. The required delivery date is July 16, 2026, and the contract references applicable technical and quality standards identified by R or I numbers from the DLA Master List. The responsible point of contact is Naron Sanderlin, with additional government-use codes and identifiers provided for tracking and disposition.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
TERMINAL BOARDThe contract specifies the procurement of a Terminal Board with NSN 5940-01-428-2634 and part number CC-1032-12 from Cornell-Carr Co., Inc., requiring one unit to be delivered within 20 days FOB destination. All supplies must comply with DLA packaging requirements per RP001 and marking standards per MIL-STD-129, with no special marking required and packaging in accordance with MIL-STD-2073-1E using preservation method 10 and unit container D3. The item is designated as a critical application item, and zero tolerance for quantity variance applies. Sampling for quality verification must follow MIL-STD-1916 or ASQ H1331 with acceptance criteria of zero non-conformances, unless otherwise specified; critical, major, and minor attributes are to be assigned verification levels VII, IV, II or AQLs of 0.1, 1.0, and 4.0 respectively. Mercury and mercury-containing compounds are strictly prohibited unless explicitly exempted for functional uses in batteries, fluorescent lights, sensors, weapon systems, or specified chemical reagents, with portable devices containing mercury requiring shock-proof construction and secondary containment per NAVSEA 5100-003D. Delivery is to be shipped via the fastest traceable means, not parcel post, to the FPO AE 09576 address, with shipping details tied to RDD 777 and project code HJ5 TP 2. The contract incorporates technical and quality requirements from the DLA Master List via RP001, RA001, RC001, RQ011, and RQ017, and applies to simplified acquisition procedures with the revision in effect on the solicitation issue date governing compliance. The solicitation was posted on July 22, 2026, with a response deadline of July 30, 2026, under contract number SPE4A7-26-T-590J, and the original required delivery date is July 16, 2026.
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThe contract is for the procurement of 63 units of a spacer sleeve identified by NSN 5365-00-061-8248 and part number NAS43HT6-24, manufactured in accordance with NAS43 Revision 12 dated 11/30/2012. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over any other standards including ASTM D3951. Inspection and acceptance are to occur at origin, with sampling conducted under MIL-STD-1916 or an equivalent zero-based sampling plan, and zero non-conformances required unless otherwise specified. Critical attributes must be verified at Level VII with an AQL of 0.1, major attributes at Level IV with an AQL of 1.0, and unspecified attributes are treated as major. Packaging must comply with MIL-STD-129 and DLA Packaging Requirements RP001, with palletization following those same standards. The item is designated as a critical application item and must be marked and labeled per RQ017. Delivery is FOB origin with no variance permitted in quantity, and the required delivery date is 107 days from contract award, with an original deadline of February 17, 2027 and a needed ship date of November 15, 2026. The delivery address is DLA Distribution Jacksonville, and all transportation instructions must follow DLAD Proc Notes C19 and C20. The contract number is SPE4A7-26-T-590S, issued as a federal solicitation under NAICS code 332510, with procurement initiated through Purchase Request 7016845196.
Hardware Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335999
New
DIBBS
TERMINAL JUNCTION B
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 335931
New
DIBBS
SPLICE, CONDUCTOR
Current-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332999
New
DIBBS
SPACER, REACTION, IGN
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
BLANKET, SOUND CONTR
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FILTER STANDBY CART
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
New
DIBBS
PARTS KIT, SEAL REPL

POSTED

about 3 hours ago

DEADLINE

in 2 days
View Details
NAICS: 335932
New
DIBBS
TAPE, INSULATION, ELE
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTING
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 3 hours ago

DEADLINE

in 8 days
View Details