Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN, LOCK

Active
SPE4A7-26-T-598TFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a single unit of a PIN and LOCK component identified by NSN 5315-01-619-5144, with a required delivery within 20 days of award. The solicitation, numbered SPE4A7-26-T-598T, was posted on July 28, 2026, and responses are due by August 5, 2026. It falls under NAICS code 332618 and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the size of the acquisition. Packaging must comply with DLA specifications, and the item must be properly marked per physical identification standards. Government identification must be removed from non-accepted supplies, and covered defense information provisions may apply. The place of performance is APO, zip code 96694, and the primary point of contact is Brad Ingram, reachable via email and phone. All submissions must be made through the DIBBS portal.

General Info

Procure one PIN and LOCK unit, NSN 5315-01-619-5144, deliver in 20 days, DIBBS submission, APO 96694.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

UNIT 100403 BOX 1, APO, AP, 96694, US

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-598T.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUS
Contacts
Brad Ingram
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,LOCK
PIN,LOCK
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
ADEQUATE DATA FOR NSN/Part Number: 5315-01-619-5144 Quantity: 1 EA Purchase Request: 7017608420QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
O-RINGThis contract is for the procurement of an O-ring identified by NSN 5331-00-498-5755, supplied in a package of 100 units and governed by stringent military and commercial specifications. The item is classified as a commercial item of a type and must comply with MIL-DTL-25988/1B or its SAE AMS-R-25988B equivalent, with manufacturing required to adhere to the latest revision of the governing standard as of the solicitation date. It is designated as a critical application item with a non-extendable shelf life of 240 months and is subject to Type I ozone-depleting chemical prohibitions, requiring any substitute materials to be pre-approved unless explicitly authorized by the specification. Packaging must conform to MIL-STD-2073-1E, incorporating a medium-duty, waterproof, greaseproof, opaque bag per MIL-DTL-117, Type II, Class C, Style 1 for UV protection, and marking must follow MIL-STD-129 with special shelf-life identification code 32. Packaging and palletization must meet DLA’s proprietary requirements, and no asbestos is permitted. Sampling and inspection protocols require adherence to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with acceptance criteria mandating zero non-conformances unless otherwise stated in the contract. Verification levels for critical, major, and minor attributes are fixed at VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0. Delivery is FOB origin with a 20-day lead time, no variance allowed in quantity, and acceptance occurs at destination. The item must be shipped via traceable freight—not parcel post—to the specified Tinker AFB address, with specific DLA packaging, marking, and unit of issue codes strictly enforced. Solicitation SPE7M4-26-T-290C is open to full and open competition, with technical and quality requirements sourced from the DLA Master List, and contractual obligations supersede any conflicting material specifications.
FLUID HANDLING DIVISION

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,The contract specifies the procurement of a wire rope assembly with part number 582-7006 and NSN 4010-01-618-1374, for a quantity of eight units, under solicitation SPE4A5-26-T-311V. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with applicable revisions determined by the solicitation or award date depending on acquisition size. Packaging must comply with MIL-STD-2073-1E and DLA packaging standards, with marking adhering to MIL-STD-129 and no special marking codes applied. Inspection and acceptance occur at the destination, with zero tolerance for non-conformances required under sampling protocols aligned with MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes are verified at levels VII, IV, and II respectively. Delivery is required within 20 days FOB origin, with no variance allowed in quantity, and shipment must be transported by the fastest traceable means, excluding parcel post, to the specified vessel shipment address at Port Hueneme, California. The item is designated for U.S. Marine Corps Underwater Construction Team 2, with a required delivery date of July 17, 2026, and the contract is governed by federal procurement rules under NAICS code 332618, issued by the Department of Defense’s ASC Supplier OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADEDThe item is a grooved headed pin, identified by NSN 5315-01-650-1734, with a quantity of two units required under purchase request 7017204298. Delivery is mandated within ten days of award. The technical data associated with this item is subject to strict export controls under either ITAR or EAR, prohibiting any disclosure or transfer to foreign persons, including foreign nationals within the United States, without prior government authorization. Access is restricted exclusively to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory training on handling defense export-controlled data, and have received formal approval from the DLA controlling authority. The solicitation, issued by the ASC Commodities Division of the Department of Defense, is identified by number SPE4A6-26-T-10AR, was posted on July 28, 2026, with responses due by August 5, 2026. The North American Industry Classification System code is 332618, and performance is to occur in Charlotte, North Carolina, with Michael Jefferson listed as the primary point of contact for inquiries.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE FABRICAnderson Metal Industries Inc is contracted to supply one unit of wire fabric with NSN 5335-01-451-0157 under contract SPE8E4-26-T-1934, with delivery required within 20 days to the USS NEW ORLEANS LPD 18 at FPO AP 96673. The product must comply with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129, with no special marking applied. Packaging must be palletized per DLA procurement guidelines and shipped FOB destination with zero tolerance for quantity variance. The contract strictly prohibits intentional addition or direct contact of mercury or mercury-containing compounds with the supplied hardware, except for functional uses in batteries, fluorescent lights, specified instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA; portable mercury-containing devices must have shockproof construction and a secondary containment barrier as per NAVSEA 5100-003D. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions. All deliveries must align with DLA transportation procedures C19 and C20, and the product must be furnished using the DoD authorized unit of issue as defined by the official DLA reference. The contract was posted on July 28, 2026, with responses due August 10, 2026, and performance is tied to the NAICS code 332618 under the Defense Logistics Agency.
Defense Logistics Agency

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIREThis contract specifies the procurement of 7/16 inch diameter, right regular lay, improved plow steel, galvanized wire rope with an IWRC core, delivered in four reels of 1,300 feet each as a single continuous length per reel. The material must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with specific requirements for packaging, labeling, and inspection outlined in RP001, RQ011, RQ017, and MIL-STD-2073-1E. Sampling must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels of VII, IV, and II for critical, major, and minor characteristics respectively. Mercury and mercury-containing compounds are strictly prohibited in the product, preservation, packaging, and marking, with limited exceptions for specific functional uses certified by NAVSEA. Unit identification and tracking are not required per the service customer’s request, and the item has no shelf life. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and the full quantity must be delivered within 164 days of contract award. Packaging, marking, and palletization must comply with MIL-STD-129 and DLA packaging guidelines, with no special marking required. The delivery address is W1A8 DLA Dist San Joaquin in Tracy, CA, with a required ship date of January 17, 2027, and the contract reference is SPE4A5-26-T-312E under NSN 4010-01-096-7420.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
CHAIN ASSEMBLY, SINGThis contract specifies the procurement of a single-leg chain assembly with a 3/8 inch chain size, Grade C, Class 4, measuring 20 feet from bearing surface to bearing surface. One end features a slip hook, Type V, Class 1, while the other end has a grab hook, Type V, Class 2. The item is identified by NSN 4010-00-176-7938 and part number 70-8-74, and must be manufactured in accordance with referenced technical and quality requirements from the DLA Master List. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances required in the sample lot unless otherwise stated. Attributes are to be verified at specified levels: VII for critical, IV for major, and II for minor, with default classifications applied where unspecified. The chain and fittings must meet the technical data outlined in SPE4A5-26-T-265F, and casting or forging may be necessary, requiring the vendor to request tooling assistance through DLA if government-provided tooling is unavailable. The contract requires delivery of 50 units FOB origin within 20 days of award, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129 labeling, using new and unused containers. Packaging and palletization must meet DLA’s RP001 requirements, with no special marking codes applied. Shipments must be sent by the fastest traceable means, excluding parcel post, and directed to the specified delivery point in Senatobia, Mississippi. The item has no shelf life requirement. The purchase request number is 7017112808, and the original required delivery date is June 8, 2026. The contract falls under NAICS 332618 and is managed by the Department of Defense’s ASC Supplier Operation OEM Division, with point of contact Hien-Van Trinh. All items must be sourced and delivered in full compliance with government procurement standards, including unit of issue alignment and logistical directives.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332618
New
DIBBS
O-RINGThe contract is for the procurement of 82 O-rings with NSN/Part Number 5331-01-165-1343, under solicitation SPE7L3-26-T-136T, with a response deadline of August 10, 2026, and delivery required within 136 days after award. The items must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, identified by R or I numbers, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless superseded by an amendment. Packaging must meet DLA standards, and all supplies must be stripped of government identification if not accepted. The contractor is required to retain supply chain traceability documentation as mandated by DLA Procurement Note C03 from August 2016, ensuring full traceability through the supply chain. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitution requires prior approval unless already authorized by specification. Items must be completely free of asbestos, and any alternative materials must be formally approved under Clause L30 and Provision 4 conditions. The delivery location is Albany, Georgia, with Rajesh Sehgal designated as the primary point of contact.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 16 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332618
New
DIBBS
PIN, HOLLOWThe contract pertains to the procurement of 100 units of PIN, HOLLOW with NSN 5315-01-553-7017 and part number 136843 from Cadillac Gage, CAGE code 10237, under solicitation SPE4A6-26-T-10CH. Delivery is required within five days FOB origin, with no quantity variance permitted, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E, including specific packaging methods, materials, and unit container codes, with marking aligned to MIL-STD-129 and no special marking required. Palletization must adhere to DLA packaging requirements. Quality requirements are governed by the DLA Master List of Technical and Quality Requirements, incorporating both tailored and non-tailored higher-level standards, including ISO 9001:2015 for manufacturers and non-manufacturers. Any configuration changes require an Engineering Change Proposal or formal variance request. The unit of issue is each, priced at $100.00 per unit with a total contract value of $10,000. The solicitation was posted on July 28, 2026, with a response deadline of August 5, 2026, and is managed by the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
O-RINGThe contract pertains to the procurement of 109 O-rings identified by NSN 5331-01-250-6307, with a delivery requirement of 20 days after delivery order. The solicitation number is SPE7L1-26-T-884T, posted on July 28, 2026, with responses due by August 10, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date for simplified acquisitions. Packaging must adhere to DLA standards, and non-accepted supplies must have government identification removed prior to return. The item involves technical data subject to export controls under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048; disclosure to foreign persons, including U.S. subsidiaries and foreign nationals, is prohibited without prior authorization. Contractors must hold a valid US/Canada Joint Certification Program certification, complete mandatory DOD export control training and the DLA questionnaire, and receive formal approval to access controlled data. The contract falls under NAICS code 332618 and is managed by the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact. Cybersecurity compliance requires certification by a CMMC Level 2 certified third-party assessment organization.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332618
New
DIBBS
O-RINGThis contract specifies the procurement of an O-RING under solicitation SPE7L1-26-T-884C, with a requirement for two units to be delivered within five days of award, FOB origin, to Fort Bragg, North Carolina. The item is identified by NSN 5331-01-471-6187 and purchase request 7017636760, with a unit price of $2.00 and no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, opaque bag to protect against UV deterioration, and marking must follow MIL-STD-129. Palletization adheres to DLA Packaging Requirements, and shipment must be traceable, excluding parcel post, using a RDD/ NMCS method. The supplier must provide and retain supply chain traceability documentation as outlined in DLA Directive C03 (August 2016), and government identification must be removed from non-accepted items. The contract strictly prohibits the use of ozone-depleting chemicals and intentional introduction of mercury or mercury-containing compounds, except for functional uses in batteries, fluorescent lights, specific instruments, weapon systems, or NAVSEA-approved chemical reagents. Any mercury-containing portable lamps or instruments must include a secondary containment barrier per NAVSEA 5100-003D. All technical and quality requirements are referenced from the DLA Master List, and covered defense information provisions apply. The delivery is for a DLA Land Supply Chain procurement under the Department of Defense, with the point of contact being Kristina Derry, and the item falls under NAICS code 332618. The required delivery date is July 27, 2026, and the solicitation was posted on July 28, 2026, with a response deadline of August 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 16 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASEThe contract is for 627 units of a quick release pin with NSN 5315-01-386-0206 under solicitation SPE4A6-26-T-09YY, issued as a total small business set-aside with a NAICS code of 332618. The delivery is due within 202 days after order, and responses were due by August 5, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with revisions controlled by the solicitation issue date or award date depending on acquisition size. Sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using a zero-based approach unless otherwise specified; critical, major, and minor attributes must be verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with unspecified attributes treated as major. The item is subject to export control under ITAR or EAR, requiring strict compliance with DFARS 252.225-7048, and access to technical data is restricted to contractors with approved JCP certification, completed DOD training, and DLA authorization. Physical identification and marking of the item per RQ017 is required, and government identification must be removed from rejected supplies per RQ011. Additionally, the contractor must be certified at CMMC Level 2 by a C3PAO to meet cybersecurity requirements. All performance and compliance obligations are tied to the designated place of performance in New Cumberland, PA, with Shaundrea Granderson listed as the primary point of contact for the DLA.
ASC COMMODITIES DIVISION

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, HOLLOWThis contract pertains to the procurement of a hollow pin with NSN 5315-01-576-9303 and part number TDA 3101V178, issued under solicitation SPE7L4-26-U-1019 for DLA Direct, CONUS delivery. The quantity is 28 units at $28.00 per unit, with a fixed delivery requirement of 45 days from contract award and FOB origin shipping terms. No quantity variance is permitted, and inspection and acceptance occur at the destination. All items must conform to the DLA Master List of Technical and Quality Requirements, which supersede any other standards, including ASTM D3951. Packaging must strictly follow MIL-STD-129 for marking and labeling, and palletization must adhere to DLA Packaging Requirements for Procurement (RP001). Sampling and inspection protocols require compliance with MIL-STD-1916 or ASQ H1331 Table 1, using zero non-conformances unless otherwise specified, with attribute verification levels set at VII, IV, and II for critical, major, and minor characteristics respectively. Government identification must be removed from rejected items, and physical identification of bare items follows RQ017. The contract is a total small business set-aside under NAICS code 332618, with Karryn Hoston as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 16 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance and NIST SP 800-171 Assessment SupportThe contract requires support for conducting NIST SP 800-171 assessments at Medium and High impact levels to ensure compliance with CMMC Level 2 requirements for protecting controlled unclassified information. The work involves evaluating systems and processes against the security controls outlined in NIST SP 800-171, identifying gaps, and implementing remediation measures as needed. All assessment findings must be documented and submitted to the Supplier Performance Risk System to validate cybersecurity readiness and maintain eligibility for DoD contracts. The scope is focused exclusively on cybersecurity compliance activities tied to safeguarding sensitive information and does not include hardware, software procurement, or general IT services. This is a subcontract under the Department of Defense, specifically managed by the ASC SUPPLIER OPER AE AND AF DIV, with a solicitation closing on August 27, 2026. The North American Industry Classification System code 541512 indicates the work falls under computer systems design and related services. Performance is expected to support federal cybersecurity mandates without requiring physical presence at a specific location, as no place of performance details are provided. The contracting activity seeks qualified entities capable of delivering accurate, timely assessments that align with federal standards and can be validated through official DoD reporting channels.
Computer Systems Design Services

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541611
New
DIBBS
Export Compliance and Technical Data ControlThis contract requires strict management of ITAR- and EAR-controlled technical data to prevent unauthorized disclosure and ensure full compliance with DFARS 252.225-7048 and the US/Canada Joint Certification Program. The subcontractor must implement robust controls to safeguard sensitive technical information throughout its lifecycle, including handling, storage, transmission, and access, adhering to federal export control regulations. Compliance is non-negotiable and applies to all personnel and systems involved in handling controlled data under this agreement. Performance will be conducted under the auspices of the Department of Defense, specifically the ASC SUPPLIER OPER AE AND AF DIV, with a response deadline of August 27, 2026. The effort falls under NAICS code 541611, indicating it involves administrative management and general management consulting services tied to compliance operations. The subcontractor is expected to maintain documented procedures, conduct regular audits, and demonstrate ongoing adherence to export control requirements, ensuring no unapproved transfer of technical data occurs domestically or internationally.
Administrative Management and General Management Consulting Services

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging, Marking, and PreservationThis contract requires the package, preserve, and label duct assemblies in full compliance with MIL-STD-129 and DLA RP001 standards, ensuring all items are properly barcoded, configured in unit packs, and protected against corrosion for secure shipment. The work involves precise adherence to military packaging protocols, including marking, labeling, and corrosion prevention measures to maintain integrity during transport and storage. All activities must meet stringent Department of Defense requirements for accountability, traceability, and readiness. The solicitation is classified as a subcontract under NAICS code 561910, with a response deadline of August 27, 2026, and was posted on July 28, 2026. The contracting activity falls under the Agency for Sustainment Command Supplier Operations, AE and AF Division, operating within the Department of Defense. While specific performance location and point of contact details are not provided, the work is tied to federal military logistics and supply chain operations, requiring certified capabilities in defense-related packaging and preservation. Interested parties must submit proposals through the designated DIBBS portal prior to the stated deadline.
Packaging and Labeling Services

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Source Inspection ServicesThe contract requires comprehensive quality assurance and source inspection services to ensure all supplied materials and components strictly adhere to MIL-STD-1916 or ASQ H1331 sampling plans with zero non-conformance acceptance criteria as mandated by the Defense Logistics Agency. Inspections must be conducted both during production and at final delivery to verify that every item meets the rigorous military standards and maintains an absolute absence of defects. This subcontract is part of a broader Department of Defense initiative under the ASC SUPPLIER OPER AE AND AF DIV and is assigned the NAICS code 541330 for professional, scientific, and technical services related to quality control. The offeror must be prepared to execute inspections at various points in the supply chain with precision and documentation rigor to meet the zero-tolerance compliance requirements. Proposals are due by August 27, 2026, and the work will support critical defense logistics operations, emphasizing reliability and adherence to federal quality benchmarks.
Engineering Services

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 332812
New
DIBBS
Precision Machining and Fabrication of Oil Cooler Duct AssemblyThe contract calls for the manufacture of a precision duct assembly designed for use in an oil cooler system, requiring advanced metal forming, welding, and precision machining techniques to meet exacting performance standards. All fabrication processes must comply with stringent military specifications, ensuring structural integrity, dimensional accuracy, and operational reliability under demanding environmental conditions. Full traceability of materials and processes is mandated, with documentation required to verify compliance at every stage of production, from raw material sourcing through final inspection and delivery. The work is classified as a subcontract under NAICS code 332812, directed by the Department of Defense through its ASC SUPPLIER OPER AE AND AF DIV, with a bid deadline of August 27, 2026. The contract emphasizes adherence to defense-grade quality controls and the ability to demonstrate compliance with applicable military standards, though the specific place of performance and point of contact are not detailed. Suppliers must possess the engineering capability and quality systems necessary to support defense-level traceability and documentation requirements without deviation.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 16 hours ago

DEADLINE

in 29 days
View Details
NAICS: 336411
New
DIBBS
DIFFUSER, AIR, AIRCRAThe contract specifies the procurement of four air diffusers for aircraft heating and ventilation systems, identified by NSN 1660-01-185-6475, with a delivery requirement of 20 days after contract award. The solicitation, issued under number SPE4A7-26-T-598Q, is a total small business set-aside under NAICS code 336411, with responses due by August 5, 2026. It incorporates technical and quality requirements from the DLA Master List, subject to revision controls based on acquisition size and amendment dates. The contract mandates compliance with DLA packaging standards, tailored higher-level quality requirements for both manufacturers and non-manufacturers, and the removal of government identification from non-accepted supplies. Physical marking of the bare item is required, though item unique identification is waived per the service customer’s request. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completed DOD export training, and DLA authorization. Additionally, the contractor must be certified at CMMC Level 2 as a third-party assessment organization and comply with all requirements regarding covered defense information.
Aircraft Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PANEL, FILLET FAIRINThe contract pertains to the procurement of one unit of a PANEL, FILLET FAIRING with NSN/Part Number 1560-00-846-6057, issued under solicitation SPE4A7-26-T-598Z by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 150 days of award, with a response deadline of August 5, 2026, and performance to occur at Robins Air Force Base, Georgia. The requirement incorporates mandatory technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with compliance governed by the revision in effect on the solicitation issue date. Cybersecurity compliance mandates CMMC Level 2 certification through a certified third-party assessment organization, and packaging must adhere to DLA-specific procurement packaging guidelines. Contractors must implement formal configuration change management procedures, including engineering change proposals and requests for variance, and are subject to inspection and acceptance at origin. All non-accepted items must have government identification removed prior to disposal or return. Physical identification of the bare item must include an object text ID identifier as specified. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and formal authorization from DLA. Any disclosure of technical data to foreign nationals, including U.S. subsidiaries or employees abroad, is strictly regulated under DFARS 252.225-7048.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RING, EXTERNALLY THRThe contract specifies the procurement of an externally threaded ring with part number 5365-00-105-3858, quantity of 10 units, to be delivered FOB origin within 330 days of contract award, with no tolerance for quantity variance. Delivery is directed to Arizona Industries for the Blind in Phoenix, AZ, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including marked identification per MIL-STD-129 with no special marking codes, and palletization per RP001. The item is designated as a critical application, requiring zero non-conformances in sampling per MIL-STD-1916 or ASQ Z1331, with unspecified attributes treated as major and verification levels assigned accordingly. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with applicable revisions determined by the solicitation or award date. The contracting activity is under SPE4A7-26-T-598U, issued by the Department of Defense, with Johanna Cruz Cruz as the point of contact for inquiries. The solicitation was posted July 28, 2026, with responses due by August 5, 2026, and the product falls under NAICS code 332510 for machinery manufacturing.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336412
New
DIBBS
DIAPHRAGM, SPECIALThe contract pertains to the procurement of 47 units of a special diaphragm assembly, bonded, with NSN 2915-01-292-1600, under solicitation SPE4A7-26-T-599D. Technical data associated with this item is subject to export control under either ITAR or EAR, restricting any disclosure or transfer to foreign persons regardless of location, including foreign nationals employed by U.S. companies or subsidiaries. Compliance with DFARS 252.225-7048 is mandatory, and distribution is limited to DLA contractors who hold an approved US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have been formally authorized by DLA to access controlled technical data. The item requires adherence to CMMC Level 2 cybersecurity standards as certified by a C3PAO and enforces specific physical identification and bare item marking requirements. Documentation for source approval must be provided per RC001. Delivery is due within 164 days of award, with performance slated for Tracy, California, 95304-5000. The solicitation was posted on July 28, 2026, with responses due by August 5, 2026, and is managed by the Department of Defense’s ASC Supplier Oper AE and AF Division, with Huy Nguyen as the primary point of contact.
Aircraft Engine and Engine Parts Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RINGOfferors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds now set at $150,000, mandating disclosure of any non-domestic materials and adherence to DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and additive manufacturing is strictly forbidden unless prior written approval is obtained from the contracting officer. Quantities must be quoted as ranges due to fluctuating demands, facilitating award flexibility without resolicitation, except for Auto IDC. Small business joint ventures must provide certifications under FAR 52.212-3 and 52.219-1 for eligibility categories including small business, service-disabled veteran-owned, WOSB, economically disadvantaged WOSB, or HUBZone. All contractors must register via DLA’s AMPS system within two months to access the Vendor Shipment Module, with WebServices users required to update their internal schemas to avoid shipment disruptions. Offers submitted after the closing date must use the “No Bid” option on DIBBS with a reason or anticipated quote date to inform buyers and prevent unnecessary follow-ups. The item in question is a ring spacer, NSN 5365-01-147-2623, with a quantity of five units, delivery due in 164 days, under solicitation SPE4A7-26-T-599E, managed by the Department of Defense through the ASC Supplier Operations AE and AF Division, with Destiny Stevenson as the primary point of contact. Fast Pay is not applicable.
Hardware Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332119
New
DIBBS
SPACER, PLATEThe contract is for the procurement of 272 units of a spacer plate identified by NSN 5365-01-442-0560 and part number DAA3121F926-060, manufactured by Triumph Aeronautics, LLC. Delivery is required FOB origin within 150 days of contract award, with zero variance allowed in quantity and inspection and acceptance occurring at the origin. All items must comply with stringent technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, including packaging per MIL-STD-2073-1E, marking per MIL-STD-129, and palletization per DLA packaging standards. Sampling shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances permitted unless otherwise specified, and critical attributes are assigned the highest verification levels. Measuring and test equipment must be calibrated and documented, and all non-accepted items must have government identification removed. Special marking is not required, and the item is designated as a critical application component. The delivery destination is the DLA Distribution facility in New Cumberland, Pennsylvania, with the need ship date set for January 3, 2027, and the original delivery deadline set for March 8, 2027. The solicitation was issued under contract number SPE4A7-26-T-599B with a response deadline of August 5, 2026.
Metal Crown, Closure, and Other Metal Stamping (except Automotive)

POSTED

about 16 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PLUG, INBOARD FLAP DThe contract involves the procurement of 32 units of a plug inboard flap drive component with part number 6-48703-6 and NSN 1560-00-340-4129, to be delivered within 43 days of an as-directed order to Tinker AFB, Oklahoma, with inspection and acceptance occurring at the origin. The item is governed by technical and quality requirements from the DLA Master List, including specific packaging and marking standards such as RP001 for DLA packaging, MIL-STD-129 for labeling, and ASTM D3951 for commercial packaging, with hazardous materials requiring compliance with FED-STD-313 and the Hazard Communication Standard. The component is subject to export control under ITAR or EAR, restricting disclosures to foreign persons and requiring contractors to be JCP-certified, have completed DLA export control training, and comply with DFARS 252.225-7048. The item does not require Unique Item Identification, per DFARS 252.211-7003(c)(1)(i), but must be physically marked under RQ017. Cybersecurity requirements mandate CMMC Level 2 certification for the C3PAO, and the contractor must implement safeguarding measures per DFARS 252.204-7012 and NIST SP 800-171, with incident reporting obligations. The contract includes numerous FAR and DFARS clauses covering equal opportunity, trafficking in persons, employment eligibility, sustainable products, hazardous materials, subcontracting, inspection, default, payment processing via WAWF, electronic submission, whistleblower rights, and prohibitions on certain Chinese military companies and covered telecommunications equipment. Payment is due under WAWF using the Invoice and Receiving Report format, and the contractor must comply with all DLA packaging, palletization, and preservation standards without explicit preservation methods detailed. The solicitation requires electronic submission via DIBBS by July 28, 2026, with no pricing information provided in the contract documentation, leaving the total value undetermined. Offerors must provide UEI and CAGE codes, represent their size and socioeconomic status, and comply with all technical data handling, inspection at origin, and documentation obligations as outlined in DLA requirements and applicable federal regulations.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 16 hours ago

DEADLINE

in 2 days
View Details