Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN

Active
SPE4A5-26-T-362FFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, identified by number SPE4A5-26-T-362F, is issued by the Department of Defense through the DLA Aviation ASC Supplier Oper OEM Division for the procurement of 57 units of a PIN, classified as a commercial item. The item is manufactured by Meggitt North Hollywood Inc under part number 222370 and National Stock Number 5315-01-166-5522. The total extended price for the single CLIN is $3,249.00, based on a unit price of $57.00. This is a simplified acquisition under FAR Part 13, with a required need ship date of February 12, 2027, and an original required delivery date of April 16, 2027. Delivery is to be made FOB Origin to the DLA Distribution Depot Oklahoma at Tinker AFB. The contract incorporates rigorous technical and quality requirements governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over individual standards. Packaging must comply with ASTM D3951 and palletization must adhere to RP001, while all marking and labeling must follow MIL-STD-129. Inspection and acceptance will occur at the destination. Offerors must submit quotations electronically via the DLA Internet Bid Board System (DIBBS) by the deadline of August 24, 2026. Compliance with various federal and defense regulations is mandatory, including requirements for hazardous material communication, cybersecurity safeguarding, and socioeconomic representations such as small business status and joint venture disclosures. Invoicing must be handled exclusively through the Wide Area Workflow (WAWF) system.

General Info

DoD procurement of 57 application pins from Meggitt North Hollywood by April 2027.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

Request for Quotations SPE4A5-26-T-362F

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER OEM DIVISION
View Agency Profile
Office AddressUSA
Contacts
Courtney Minor
contact@example.gov

Full Description

Show more
PIN
PIN
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
CRITICAL APPLICATION ITEM
MEGGITT NORTH HOLLYWOOD INC 79318 P/N 222370
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017917748 0001 EA 57.000
NSN/MATERIAL:5315011665522
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
SPE4A5-26-T-362F
SECTION B
PR: 7017917748 PRLI: 0001 CONT’D
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:02/12/2027 Original Required Delivery Date:04/16/2027
SPE4A5-26-T-362F NSN/Part Number: 5315-01-166-5522 Quantity: 57 EA Purchase Request: 7017917748QTY: 57 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-17XU
This contract is for the procurement of 54 blind rivets, identified as NSN 5320-01-045-3010 and part number NAS1921B04-06. The items are classified as commercial critical application items and must be manufactured according to the current revision of the applicable part standard. Quality assurance is governed by specific DLA technical and quality requirements, including zero-based sampling plans per MIL-STD-1916 or ASQ H1331, and identification marking must comply with MIL-STD-130N. Delivery is required within 171 days, with a need ship date of February 12, 2027. The items are to be delivered FOB Origin to DLA Distribution Jacksonville, Florida. Packaging must adhere to ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements for procurement. Inspection and acceptance will take place at the destination.
ASC COMMODITIES DIVISION

POSTED

29 minutes ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BUSHING, NONMETALLIC
Solicitation # SPE4A7-26-T-669A
This contract is for the procurement of 19 nonmetallic bushings, identified by NSN 5365015034468 and part numbers 21719 and NV 00002 Rev H from Howden American Fan Company. The order is managed under solicitation SPE4A7-26-T-669A with a delivery timeline of 165 days after order. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under RP001 and marking guidelines per MIL-STD-129. Sampling must follow MIL-STD-1916 or ASQ H1331, emphasizing a zero-based sampling plan for acceptance. Notably, the material has no shelf life requirement, and the use of mercury or mercury compounds in packaging is prohibited. Item Unique Identification is not required for this specific order.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
RING ASSEMBLY
Solicitation # SPE4A7-26-T-669L
This contract is for the procurement of 75 units of Ring Assembly, identified by NSN 5365011333615 and part number SP2307-5. The delivery is required within 20 days after order, with a final required delivery date of August 11, 2026. The items are to be delivered FOB destination to the USS George Washington CVN 73. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-129 and MIL-STD-2073-1E. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with zero-based sampling plans applied unless otherwise specified. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional requirements approved by NAVSEA.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
DOOR, ACCESS, UTILITY
Solicitation # SPE7L1-26-T-977Y
This solicitation, issued by the Department of Defense Land Supply Chain under solicitation number SPE7L1-26-T-977Y, is for the procurement of 37 utility access door covers, identified by NSN 5340-01-438-8908. The contract requires delivery within 121 days after the order date and is categorized under NAICS code 332510. Performance is centered in New Cumberland, Pennsylvania. The agreement mandates strict adherence to several regulatory and technical standards, including CMMC Level 2 certification for third-party assessment and compliance with DLA packaging and quality requirements. It prohibits the use of Class I ozone-depleting chemicals and enforces rigorous export controls under ITAR and EAR regulations. Access to technical data is restricted to approved contractors who have completed the necessary JCP certification and DLA export-control training.
LAND SUPPLY CHAIN

POSTED

29 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLEVIS, ROD END
Solicitation # SPE7L1-26-T-976X
This contract is for the procurement of two rod end clevises, identified by NSN 5340-01-718-0437 and part number 000963-239 from Hydraulics International, Inc. The order is designated as a critical application item and is managed under solicitation SPE7L1-26-T-976X by the Department of Defense Land Supply Chain. Delivery is required within five days of order, with a final required delivery date of August 14, 2026. The agreement specifies that shipping must be handled via the fastest traceable means to the Commanding Officer NDLO MEB in Stjoerdal, Norway, explicitly prohibiting the use of parcel post. Compliance with DLA packaging requirements, MIL-STD-2073-1E for delivery preparation, and MIL-STD-129 for marking is mandatory. Inspection and acceptance will take place at the destination, with shipping terms set as FOB Origin.
LAND SUPPLY CHAIN

POSTED

29 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-978A
This solicitation, identified as SPE7L1-26-T-978A, is issued by the Department of Defense Land Supply Chain for the procurement of 100 loop clamps under NSN 5340-01-632-1980. The contract requires delivery within 50 days after receipt of the order and is categorized under NAICS code 332510. Performance is designated for Cherry Point. The agreement mandates strict adherence to cybersecurity and export control standards, including CMMC Level 2 certification and compliance with ITAR and EAR regulations. Contractors must follow DLA packaging requirements and ensure that no class I ozone-depleting chemicals are used in the items. Access to technical data is restricted to approved entities with valid US/Canada Joint Certification Program certification and completed export-control training.
LAND SUPPLY CHAIN

POSTED

29 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A1-26-T-2612
This contract is for the procurement of 10 turnlock fastener studs, identified by NSN 5325-01-191-3285 and Howmet Global Fastening Systems part number 39S08-2-1AA. The order is designated as a critical application item and must be delivered FOB Origin to the AWCF SSF Camp Carroll facility in Waegwan, South Korea, within 10 days after receipt of the order. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E, with palletization following RP001 requirements. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The contract also incorporates technical and quality requirements via the DLA Master List and requires specific documentation for source approval requests.
AVIATION SUPPLY CHAIN

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
BOOT, DUST AND MOISTURE
Solicitation # SPE7L1-26-T-977X
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 37 dust and moisture seal boots under part number 5340-00-164-6702. The contract is categorized under NAICS code 332510 and requires delivery within 28 days after the order is placed. Performance for this contract is located in New Cumberland, Pennsylvania. The agreement is subject to specific technical and quality requirements, including DLA packaging standards and the removal of government identification from any non-accepted supplies. Interested parties must respond by August 28, 2026, and can coordinate with the primary point of contact, Michael Nordahl, regarding solicitation number SPE7L1-26-T-977X.
LAND SUPPLY CHAIN

POSTED

29 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, GROOVED, HEADLESS
Solicitation # SPE7M2-26-U-0345
This contract, identified as solicitation SPE7M2-26-U-0345, is for the procurement of 22 headless grooved pins, part number BBP-1039-VH, with NSN 5315-01-412-6718. The requirement is issued by the Department of Defense Nuclear Reactor Program under NAICS code 332510. Delivery is required within 116 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-129 and RP001, while prohibiting the use of mercury or mercury compounds in preservation and packaging. Technical and quality requirements are governed by the DLA Master List, and the contract includes provisions for configuration change management and the removal of government identification from non-accepted supplies.
NUCLEAR REACTOR PROGRAM

POSTED

29 minutes ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-26-T-977S
This contract is for the procurement of one spring tension clip, identified by NSN 5340998130522 and Perkins Engines Co Ltd part number 2481D456. The solicitation, numbered SPE7L1-26-T-977S, is issued by the Department of Defense Land Supply Chain. Delivery is required within five days after the order, with a required delivery date of August 14, 2026. The shipment is designated as FOB Origin, with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically referencing MIL-STD-2073-1E and MIL-STD-129. It also incorporates technical and quality requirements via the DLA Master List and includes provisions for the removal of government identification from non-accepted supplies. The item is to be shipped to the Distribution Management Office and Reparable Issue Point at Camp Kinser, Japan.
LAND SUPPLY CHAIN

POSTED

29 minutes ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-18SX
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 44 threaded pin-rivets under NSN 5320-01-062-6499. The contract requires delivery within 170 days after the order is placed, with performance located at Tinker AFB. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for source approval requests, packaging, and configuration change management. Strict compliance is required regarding cybersecurity and data protection, specifically CMMC Level 2 certification and the handling of covered defense information. Furthermore, the technical data associated with this item is subject to ITAR and EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.
ASC COMMODITIES DIVISION

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-668S
This contract is for the procurement of three sleeve spacers under solicitation number SPE4A7-26-T-668S, identified by NSN 5365010577101. The items are designated as critical application items and are associated with part number 3833145-1 from Lockheed Martin Corporation and Parker-Hannifin Corporation. Delivery is required within five days of order, with the point of inspection and acceptance set at the origin. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. The goods are to be shipped via G&B Packing Company to the Government of Israel Ministry of Defense.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Same awarding agency

NAICS: 335313
New
DIBBS
SWITCH, PRESSURE
Solicitation # SPE4A5-26-T-368A
This contract is for the procurement of 37 pressure switches, identified by NSN 5930-00-805-5960 and Hamilton Sundstrand Corporation part number 560781. The items are classified as commercial critical application items and must adhere to specific technical and quality requirements, including CMMC Level 2 self-assessment and covered defense information standards. Delivery is set for 237 days after the order, with a required delivery date of October 29, 2026, shipping FOB Origin to DLA Distribution Warner Robins. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with zero non-conformances required for acceptance. Packaging and preservation must comply with MIL-DTL-28786 for switches, MIL-STD-129 for marking, and RP001 for palletization. The contract specifies destination inspection and acceptance, and it explicitly states that item unique identification is not required by the service customer.
Switchgear and Switchboard Apparatus Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332613
New
DIBBS
SPRING, HELICAL, COMPRES
Solicitation # SPE4A5-26-T-367Z
This contract is for the procurement of 103 helical compression springs, identified by NSN 5360-01-423-4048 and part number 44-1832. The items are designated as critical application components and must be delivered within 35 days to the Arizona Industries for the Blind in Phoenix. The agreement specifies a zero percent quantity variance and mandates that inspection and acceptance occur at the destination. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan for acceptance. The contract strictly prohibits the use of Class I ozone-depleting chemicals and requires adherence to DLA packaging and marking standards, specifically MIL-STD-129 and MIL-STD-2073-1E. Additionally, the supplier must comply with the DLA Master List of Technical and Quality Requirements and provide necessary documentation for source approval.
Spring Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 334412
New
DIBBS
RETAINER-EJECTOR, ELECT
Solicitation # SPE4A5-26-T-368Q
This contract is for the procurement of 15 units of an electrical card ejector retainer, identified by NSN 5998012534253 and Honeywell part number 8503647. The item is designated as a critical application item and must be manufactured according to specific technical and quality requirements, including the use of MIL-PRF-31032 for printed circuit boards. Delivery is required within five days after order, with the point of inspection and acceptance set at the origin. The agreement mandates strict adherence to DLA packaging and marking standards, specifically requiring DOD qualified electrostatic discharge and electromagnetic interference protective materials per MIL-PRF-81705 to prevent damage to leads and terminals. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331. The final shipment is destined for the Government of Israel Ministry of Defense.
Bare Printed Circuit Board Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 336415
New
DIBBS
PAD, SUPPORT RING
Solicitation # SPE4A5-26-T-368M
This contract is for the procurement of three support ring pads, identified as Boeing part number 29-49006-1 and NSN 1440-01-006-3225. The items are designated as critical application items and must be delivered to Vandenberg SFB within 20 days. The agreement specifies a zero percent quantity variance and requires inspection and acceptance to take place at the destination. Compliance is required with the DLA Master List of Technical and Quality Requirements, including specific standards for packaging via ASTM D3951 and MIL-STD-129, and palletization per RP001. Sampling must follow MIL-STD-1916 or ASQ H1331, with strict adherence to zero-based sampling plans for acceptance. Shipping must be conducted via traceable means, and the contract incorporates requirements for source approval documentation and the removal of government identification from non-accepted supplies.
Guided Missile and Space Vehicle Propulsion Unit and Propulsion Unit Parts Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 334514
New
DIBBS
TRANSDUCER, VELOCITY
Solicitation # SPE4A5-26-T-367X
This contract is for the procurement of one velocity transducer, identified by NSN 6680-01-652-9746 and Perkins Engines Inc part number U5MK1086. The order is issued by the Department of Defense under solicitation number SPE4A5-26-T-367X, with a required delivery date of August 11, 2026, and a delivery timeframe of 20 days after order. The item is to be delivered FOB Origin to the Commander Naval Air Force Pacific Fleet in San Diego, California, using the fastest traceable shipping means. The agreement mandates strict adherence to DLA technical and quality requirements, including specific sampling methods per MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA packaging requirements. Inspection and acceptance will take place at the destination, and the contract specifies a zero percent quantity variance.
Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 336412
New
DIBBS
LEVER ASSEMBLY
Solicitation # SPE4A5-26-T-368K
This solicitation, number SPE4A5-26-T-368K, is for the procurement of three lever assemblies under NAICS code 336412 for the Department of Defense. Offerors must provide details regarding dealer or distributor certifications and are encouraged to submit quantity ranges to accommodate potential demand volatility. The contract requires strict adherence to domestic material restrictions, including the Buy American Act and the Berry Amendment, and prohibits the use of covered telecommunications equipment. Submission of a No Bid quote with an anticipated date is requested for those unable to quote by the deadline to inform buyers of intent. Additionally, all contractors must prepare for a transition to the Account Management and Provisioning System for Vendor Shipment Module access. Additive manufacturing is prohibited unless specifically authorized by the contracting officer. The delivery requirement is set for 704 days after the order.
Aircraft Engine and Engine Parts Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
FLOW DAMPENER
Solicitation # SPE4A5-26-T-368P
This contract, identified by solicitation number SPE4A5-26-T-368P, is for the procurement of four flow dampeners, part number 161607-106, manufactured by Hydraulics International, Inc. The items are identified by NSN 4920-01-668-4835 and are to be delivered to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. The required delivery date is July 17, 2026, with a delivery window of 167 days after the order. The agreement specifies that delivery, inspection, and acceptance will occur at the point of origin. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. There is no allowed quantity variance for this order. The procurement is managed by the Department of Defense under the ASC Supplier Oper OEM Division.
Other Electronic Component Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A5-26-T-368B
This contract is a solicitation from the Department of Defense, specifically the ASC Supplier Oper OEM Division, for the procurement of six drive shaft actuators under solicitation number SPE4A5-26-T-368B. The delivery requirement is set for 171 days after the order is placed. The procurement is governed by the DLA Master List of Technical and Quality Requirements, including specific mandates for source approval requests, packaging, and inspection and acceptance at origin. The contract imposes strict compliance standards, including CMMC Level 2 certification and adherence to Qualified Products Lists or Qualified Manufacturers Lists. Significant restrictions are placed on the export of technical data, requiring compliance with ITAR and EAR regulations. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 326220
New
DIBBS
HOSE ASSEMBLY, AIR D
Solicitation # SPE4A5-26-T-368N
This contract is for the procurement of two air duct hose assemblies, identified as NSN 4720-01-018-6580 and Boeing part numbers 10-60023-2 and BOE2090-0002. The items are designated as critical application items and must adhere to strict quality and technical standards, including ISO 9001:2015 for manufacturers and specific DLA master list requirements. Sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sample lots. The delivery is set for FOB Origin with a required ship date of July 18, 2028, and a delivery window of 692 days. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. The final destination for the shipment is the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Item Unique Identification is not required for this specific order per the service customer's request.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A5-26-T-368E
This contract is for the procurement of 55 sleeve spacers under solicitation SPE4A5-26-T-368E for the Department of Defense. The items are identified by NSN 5365-01-057-7101 and are associated with part number 3833145-1 from manufacturers Lockheed Martin Corporation and Parker-Hannifin Corporation. Delivery is required within 20 days, with shipping handled FOB Origin to the Government of Israel Ministry of Defense via G&B Packing Company. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, with a zero-tolerance policy for non-conformances in sample lots. The contract specifies that inspection and acceptance will occur at the point of origin.
Hardware Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 336411
New
DIBBS
RETAINER, VALVE
Solicitation # SPE4A5-26-T-368R
This contract is for the procurement of two valve retainers, identified as NSN 1615-01-201-9628 and Boeing part number A02R2764-1. The items are designated as critical application items and must be delivered within 10 days of order. Delivery is set as FOB Origin, with both inspection and acceptance occurring at the destination, which is the US Army SSA in Powidz, Poland. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for source approval, covered defense information, and configuration change management. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling and inspection must follow MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this specific order.
Aircraft Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details
NAICS: 333613
New
DIBBS
GEARSHAFT, MULTIPLE GEA
Solicitation # SPE4A5-26-T-368J
This solicitation, issued by the Department of Defense under the ASC Supplier OEM Division, is for the procurement of 12 units of a multiple gear gearshaft, identified by NSN 3040-01-032-4216. The contract requires delivery within 170 days after the order date, with the place of performance located at Tinker AFB. The agreement is subject to strict technical and quality requirements, including CMMC Level 2 self-assessment and specific DLA packaging and marking standards. Notably, the item contains technical data subject to ITAR or EAR export controls, requiring contractors to have an approved US/Canada Joint Certification Program certification and completed export-control training to access the data. Item Unique Identification is not required for this specific request.
Mechanical Power Transmission Equipment Manufacturing

POSTED

29 minutes ago

DEADLINE

in 8 days
View Details