Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, QUICK RELEASE

Active
SPE4A6-26-T-13TYFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 50 units of a quick release pin with NSN 5315-01-516-3402 under solicitation SPE4A6-26-T-13TY, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 112 days of award, with performance to be conducted in Tracy, California. The solicitation includes a comprehensive set of technical, quality, and compliance requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Inspection and acceptance must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II or corresponding AQLs of 0.1, 1.0, and 4.0. The item is subject to stringent export controls under ITAR or EAR, restricting technical data dissemination to contractors certified under the US/Canada Joint Certification Program, trained in DOD export-controlled data handling, and approved by DLA. Physical identification and marking of the item are required, and cybersecurity compliance with CMMC Level 2 is mandatory for third-party assessors. Government identification must be removed from non-accepted supplies, and while item unique identification is not required under DFARS 252.211-7003(c)(1)(i), covered defense information protocols and tailored quality requirements apply. All contractors must comply with DLA packaging standards and the RQ001 tailored quality provisions applicable to both manufacturers and non-manufacturers. The contract’s point of contact is Summer Allen, with responses due by August 13, 2026.

General Info

Procure 50 quick release pins, deliver in 112 days, comply with MIL-STD, ITAR, and CMMC Level 2.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-13TY.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
SUMMER ALLEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,QUICK RELEASE
PIN, QUICK RELEASE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be
SPE4A6-26-T-13TY
SECTION B
exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5315-01-516-3402 Quantity: 50 EA Purchase Request: 7017101821QTY: 50 Delivery: 112 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Manufacturing of a Critical Application Spacer Plate (NSN 5365004030349)The contract requires the complete manufacturing, finishing, inspection, packaging, and delivery of 101 units of a critical application Spacer Plate identified by NSN 5365004030349, all to meet stringent military specifications. The work must adhere to exacting standards for material composition, surface plating, and quality control procedures to ensure the components are fit for high-stakes military use. All deliverables must be fully compliant with defense requirements, including rigorous documentation and traceability throughout the production lifecycle. The contract is a subcontract under the Department of Defense, managed by the ASC SUPPLIER OPER AE AND AF DIV, with performance required at Tinker AFB, Oklahoma, 73145-8000. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026. The North American Industry Classification System code is 332510, indicating the focus is on forging and stamping operations. The contract is not subject to a specific set-aside designation, and all work must be completed and delivered within the specified timeline to meet operational readiness demands.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Supply of Loop Clamps (NSN 5340-15-118-3845)The contract requires the manufacture, packaging, and delivery of 57 units of CLAMP, LOOP with NSN 5340-15-118-3845, classified as a commercial item and governed by Department of Defense specifications including MIL-STD-2073-1E for packaging and MIL-STD-129 for labeling requirements. The work must be performed in accordance with established military standards to ensure compatibility, durability, and traceability within defense logistics systems. The product is to be delivered to the specified place of performance in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation is issued as a subcontract under NAICS code 332510, which pertains to forged and stamped metal product manufacturing, and is managed by the Land Supply Chain organization under the Department of Defense. The opportunity was posted on August 5, 2026, and responses are due by August 14, 2026. There is no set-aside designation, and the contract is open to general commercial suppliers capable of meeting all technical, packaging, and delivery requirements as defined by DLA standards. All submissions must align with the specifications outlined in the referenced military standards and be delivered to the designated location by the stated deadline.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
Precision Metal Rivet Manufacturing for Defense LogisticsThe contract entails the manufacture of 3,000 precision metal rivets identified by NSN 5320011409934, to be produced in strict compliance with Technical Data Package Revision B General 2 and reference drawing NR 76301 P.S.19000 REVISION NR W dated January 23, 2008. The scope encompasses all stages of production including casting and forging operations, establishment of required tooling, and full quality assurance processes aligned with military standards to ensure dimensional accuracy, material integrity, and performance reliability. All work must adhere to the exacting specifications set forth by defense procurement protocols to meet operational requirements. This subcontract is issued under the Department of Defense, specifically by the ASC Commodities Division, with performance required at Robins Air Force Base, Georgia, 31098-1887. The North American Industry Classification System code 332510 identifies the industry category for forged and stamped metal product manufacturing. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026. The contract is managed through the DIBBS system under the referenced solicitation link, and all deliverables are intended for use in defense logistics applications requiring certified, high-reliability components.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Supply of Machine Thread Plugs (NSN: 5365-011146444)The contract entails the supply of standardized machine thread plugs designated by NSN 5365-011146444, manufactured to meet military specifications for precision applications in defense or industrial systems. These components are critical for ensuring thread integrity and dimensional accuracy in high-stakes operational environments, requiring strict adherence to quality and performance standards. The offering is structured as a subcontract with recurring delivery obligations, indicating an ongoing need for these hardware items across multiple procurement cycles. The solicitation was posted on August 5, 2026, with a response deadline of August 12, 2026, and is administered by the ASC SUPPLIER OPER AE AND AF DIV under the Department of Defense. The North American Industry Classification System code 332510 identifies the category as machine shop and related services, underscoring the manufacturing and precision machining nature of the work. Performance is expected to be coordinated under DLA-managed logistics channels, though specific delivery locations are not outlined. Interested parties must respond through the official DIBBS portal prior to the deadline to be considered for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
SHIM
Solicitation # SPE4A7-26-T-620T
This contract specifies the supply of 427 units of a shim component identified by NSN 5365-00-663-3053 and part number 11-20216-1, governed by the technical standard AMS-DTL-22499 which supersedes MIL-S-22499. The item is designated as a critical application component and must adhere to stringent quality and traceability requirements, including compliance with NAVAIR aircraft launch and recovery equipment standards. All hardware must be free of intentional mercury or mercury-containing compounds except in approved exceptions such as functional batteries, fluorescent lamps, sensors, weapon systems, and specified chemical reagents, with portable mercury-containing devices requiring shockproof construction and a secondary containment barrier per NAVSEA 5100-003D. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise stated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. Marking requirements mandate inclusion of the contract number, NAWC CAGE code, and part number on bare items, conforming to MIL-STD-129 and technical drawings that take precedence in case of conflict. Packaging must comply with MIL-STD-2073-1E and DLA packaging directives, with palletization and unit containment specified by code U and packaging methods including preservative treatment and cushioning. The item is delivered FOB origin with inspection and acceptance also occurring at origin, and delivery is mandated within 142 days from the contract award, with a required ship date of January 3, 2027. Shipping and delivery are directed to the DLA Distribution facility in New Cumberland, Pennsylvania, under transportation protocols outlined in DLAD procedural notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-10AJ
The item specified is a PIN, STRAIGHT, HEADED with NSN 5315-00-734-1175, quantity of 67 units, under purchase request 7015605086, with delivery required within 12 days ADO. This item is subject to strict export control regulations under either ITAR or EAR, meaning technical data associated with it cannot be disclosed to foreign persons regardless of location, including foreign national employees or subsidiaries of U.S. companies. Access to this technical data is restricted solely to DLA contractors who hold valid US/Canada Joint Certification Program certification, have completed mandatory training on handling DOD export-controlled data, and have been formally approved by the DLA controlling authority. The solicitation number is SPE4A6-26-T-10AJ, posted on July 28, 2026, with responses due by August 5, 2026. The procurement falls under NAICS code 332510 and is managed by the ASC Commodities Division of the Department of Defense, with performance taking place in Cherry Point, North Carolina, 28533-5040. Primary point of contact is Debra Fowler, reachable via email and phone listed in the contract data.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-12ZN
The contract is for the procurement of 26 Quick Release Pins, identified by NSN 5315-00-222-1711 and part number MS17984C630, manufactured in accordance with NASM17984 Revision 3 dated 01/30/2026 and reference drawing 13873 EI-0022217111. The item is classified as a critical application component and must comply with all referenced technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which take precedence over other standards. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attributes are to be verified at levels VII, IV, and II for critical, major, and minor characteristics respectively. All hardware must meet the current revision of the governing part standard, and prior revisions are not acceptable for items manufactured after the solicitation date. Packaging must adhere to ASTM D3951 and MIL-STD-129 for marking and labeling, with palletization conforming to DLA Packaging Requirements. The unit of issue is ea, with a fixed quantity of 26 units and zero variance allowed. Delivery is required FOB origin within 60 days of the contract, with an original required delivery date of December 8, 2026, and a need ship date of October 13, 2026. Inspection and acceptance occur at origin. The delivery address is DLA Distribution Jacksonville, Building 175, Swan Road, Jacksonville FL 32212-0103, with freight shipping instructions referencing DLAD Proc Note C19 and C20. The contract, issued under solicitation SPE4A6-26-T-12ZN, was posted August 5, 2026, with a response deadline of August 13, 2026, and is administered by the ASC Commodities Division, Department of Defense. The unit price is $26.00 per unit, totaling $676.00. The NAICS code is 332510, and all documentation must conform to DLA’s authorized units of issue guidelines.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9329
The contract specifies the procurement of a Right Hand Single Arm Mounting Bracket with NSN 5340-01-615-0030 under solicitation SPE7LX-26-U-9329, issued as a total small business set-aside under NAICS code 332510. The estimated quantity is 176 units with delivery to be made FOB origin within 116 days of order placement, though the contract operates as an indefinite-delivery, indefinite-quantity (IDIQ) instrument with no binding obligation until a specific delivery order is issued. Inspection and acceptance occur at the destination point, and compliance with military standards is mandatory: packaging must adhere to MIL-STD-2073-1E with preservation method 10 (clean and dry), while markings follow MIL-STD-129 and item identification complies with MIL-STD-130N, including permanent marking and barcoding. Sampling and inspection procedures require zero non-conformances using MIL-STD-1916 or ASQ H1331, with verification levels assigned to critical, major, and minor attributes. Hazardous materials must be labeled per 29 CFR 1910.1200 and require pre-award submission of Safety Data Sheets and a disclosure table identifying exempted substances under specific federal statutes. Payment must be processed electronically through WAWF, and the contractor is subject to a wide array of FAR and DFARS clauses covering small business representation, employment eligibility, trafficking in persons, cybersecurity safeguards, export control, and prohibitions on sourcing from certain entities. Packaging and palletization must meet DLA’s RP001 requirements, with no special marking or cushioning specified. The contract carries a maximum value of $350,000, though unit price data is not provided, and award will be made on a lowest price technically acceptable basis. The contracting officer’s representative and payment office details are not included but will be provided post-award through DD Form 1155 and DoDAAC codes.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
CLEVIS, ROD END
Solicitation # SPE7L1-26-T-917W
Offerors must ensure compliance with strict domestic sourcing requirements, including the Berry Amendment and Buy American Act, with a reduced threshold of $150,000, and must disclose any non-domestic materials used in their quotations. The solicitation prohibits the use of additive manufacturing for parts unless explicitly approved by the contracting officer, and offers containing such items will be rejected. All offerors must certify they will not provide covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016. Small business joint ventures must submit required representations for eligibility under designated small business categories. For shipment compliance, vendors must prepare for mandatory registration through DLA’s Account Management & Provisioning System to access the Vendor Shipment Module, with critical schema updates required for WebServices users. Fast Pay is not applicable, and vendors are strongly encouraged to quote quantity ranges due to fluctuating demand to facilitate award flexibility without administrative delays. Offers must be submitted through DIBBS, and those unable to quote by the closing date must submit a “No Bid” with an anticipated quote date or reason to avoid assumptions of non-responsiveness. The solicitation is a total small business set-aside under NAICS 332510 for a clevis, rod end, with a delivery requirement of 368 days ADO to Cherry Point, NC, and all inquiries should be directed to the designated point of contact.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-12XD
The contract is for the procurement of seven quick release pins identified by NSN 5315-00-043-3961 under solicitation SPE4A6-26-T-12XD, with a response deadline of August 13, 2026, and a required delivery within 60 days of award. The item is procured competitively in accordance with a military or federal specification and does not require unique item identification per the service customer’s request, with DFARS 252.211-7003(c)(1)(i) governing this exclusion. The material has no shelf life restriction. Technical and quality requirements referenced by R and I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and inspection and acceptance occur at the origin. Government identification must be removed from non-accepted supplies. Physical marking of the bare item is required, and covered defense information provisions may apply. The procurement is managed by the ASC Commodities Division under the Department of Defense, with performance to be delivered to Jacksonville, Florida, 32212-0103, and primary point of contact is Ahoefa Simons De Fanti.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L1-26-T-917N
This contract, identified by solicitation number SPE7L1-26-T-917N, is for the procurement of 346 units of a clamp and loop component with NSN 5340-01-030-4980, priced at $346.00 per unit, totaling $119,716.00. Delivery is required FOB origin within 119 days, with the original delivery date set for November 25, 2026, and a needed ship date of December 15, 2026. All supplies must comply with stringent technical and quality requirements drawn from the DLA Master List of Technical and Quality Requirements, with specific mandates including MIL-STD-130N for identification marking, MIL-STD-1916 or ASQ H1331 for zero-defect sampling, and strict adherence to packaging standards per MIL-STD-129 and RP001. The use of Class I ozone depleting chemicals is strictly prohibited, and any substitution requires prior approval. Compliance documentation such as the Certificate of Quality Compliance is mandatory, and the Certificate of Conformance procedures under FAR 52.246-15 are authorized unless overridden by a Quality Assurance Letter of Instruction. The item must be shipped to the designated delivery point at DLA District San Joaquin, 25600 S Chrisman Road, Rec Whse 57, Tracy, CA 95304-5000, with packaging requirements depending on hazardous material status per FED-STD-313: non-hazardous items follow ASTM D3951 unless superseded by DLA requirements, while hazardous items must comply with TQ requirement IP025. Palletization must conform to DLA packaging guidelines, and all packaging and labeling must meet MIL-STD-129 with correct Unit of Issue and Quantity per Unit Pack as specified. The contract mandates full and open competition with no set-asides, and all technical data and revisions referenced, including TDP Rev A Gen 1 based on drawing NR 19207, take precedence. Transportation directives are governed by DLAD Proc Notes C19 and C20, and the official point of contact for procurement inquiries is Isabelle Szulewski, reachable via email and phone listed in the contract.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7LX-26-U-9318
The contract is for the procurement of 631 mounting brackets, identified by NSN 5340-01-647-8723, under solicitation SPE7LX-26-U-9318, issued by the Strategic Acq Program Directorate of the Department of Defense. Delivery is required within 113 days after receipt of order, with a guaranteed minimum of 94 units and a contract ceiling of $350,000. The contract is structured as an indefinite-delivery, indefinite-quantity (IDIQ) vehicle, meaning orders will be issued during a one-year period following award, with performance dictated by individual delivery orders. FOB origin applies, placing delivery responsibility on the contractor to the origin point, while inspection and acceptance occur at the destination under government oversight governed by FAR 52.246-2. Packaging must comply with RP001 DLA requirements, ASTM D3951 for non-hazardous items, and FED-STD-313 for hazardous materials, with labeling conforming to MIL-STD-129 and 29 CFR 1910.1200. Hazardous materials require pre-award submission of hazard labels and safety data sheets, and foreign-flag vessel use for ocean transport is prohibited unless a waiver is obtained at least 45 days in advance. The contract incorporates numerous FAR and DFARS clauses, including mandatory cybersecurity provisions such as 252.204-7012 for safeguarding covered defense information and 252.240-7997 requiring NIST SP 800-171 compliance for protecting controlled unclassified information on contractor systems. Additional clauses enforce compliance with export controls, prohibitions on hexavalent chromium and communist Chinese military company products, whistleblower rights disclosures, and electronic invoicing through WAWF. The contractor must also adhere to levies on payments for outstanding debts, subcontracting transparency for commercial items, and pricing methodologies for modifications. All technical and quality requirements are tied to the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date. Offerors must submit electronic responses via DIBBS by August 20, 2026, and are required to complete mandatory representations regarding small business status, UEI, and compliance with defense information handling standards, though no offeror-specific certifications are present in the solicitation
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 15 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Acceptance SupportThe contract entails performing comprehensive quality inspections for incoming and outgoing shipments at the origin location, adhering strictly to MIL-STD-1916 and AQL sampling standards to ensure all products meet government acceptance criteria. This work is critical to verifying compliance with military specifications before delivery, requiring precise execution of inspection protocols and documentation to support final acceptance by the Department of Defense. The performance location is designated as Robins AFB, Georgia, with all inspections to be conducted in alignment with the specified military standards. This is a small business set-aside subcontract under the NAICS code 541330, reserved exclusively for total small businesses as defined by the SBA, with a response deadline of August 13, 2026. The solicitation originates from the ASC Commodities Division, part of the Department of Defense, underscoring its importance to defense logistics and supply chain integrity. All work must be completed in accordance with federal acquisition regulations, and the contractor is expected to maintain rigorous quality controls to uphold the standards required for government contracts.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Shipping to DLAThe contract requires the transportation and shipping of packaged and labeled bolts from the origin point to DLA Distribution Warner Robins, GA, with strict adherence to DPAS priority rating, FOB origin terms, and the use of U.S.-flag vessels if ocean freight is involved. All shipments must comply with federal regulations governing defense logistics, ensuring timely and secure delivery to the specified performance location at Robins Air Force Base, Georgia. The requirement emphasizes full compliance with transportation standards and documentation to meet Department of Defense supply chain protocols. This subcontract is a Total Small Business Set-Aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5, with the NAICS code 484220 indicating it pertains to truck transportation of freight. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Interested parties must submit proposals through the DIBBS portal, and all logistical operations must align with federal procurement and national security shipping mandates.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details