This Solicitation opportunity from Department Of Defense was posted on March 18, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
PIN, QUICK RELEASE
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract calls for the procurement of a quick release pin, identified by NSN 5315-01-447-3327 and specified under part number M45952/1-C4-06. The item is to be manufactured using a forging process requiring specialized tooling, with quality and technical requirements governed by the current revisions of military and consensus standards MIL-P-45952/1 and MIL-DTL-45952A. It is classified as a commercial item with sampling and inspection methods defined by MIL-STD-1916 or equivalent zero-based sampling plans, ensuring critical, major, and minor attributes are properly verified. The contract includes specific packaging and marking requirements in accordance with ASTM D3951, MIL-STD-129, and DLA packaging protocols, with shipment to be made FOB origin within 20 days of order. The procurement is managed by the Department of Defense's ASC Commodities Division, with delivery expected at the Sumner Distribution Center in Washington. The contract outlines zero percent tolerance for quantity variance, inspection and acceptance at origin, and shipment via the fastest traceable means excluding parcel post. Point of contact for technical or sourcing inquiries is provided, along with references to additional resources for forging and casting supply chains. The solicitation period is from March 18 to March 26, 2026, with a planned delivery date of March 18, 2024, indicating a time-sensitive requirement. Overall, the contract ensures stringent quality controls, adherence to military specifications, and streamlined logistics to meet the Department of Defense’s standards for this specialized hardware component.
General Info
Place of Performance
3700 150TH AVE CT EAST, SUMNER, WA, 98390-0000, USASet-Aside
Documents
1AI Contract Breakdown
Uniform Contract FormatContract not broken down yet
CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
PIN,QUICK RELEASE
A forging process was identified as a means to manufacture this item. Tooling is required to produce a forging. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS ITEM IS IDENTIFIED AS A COMMERCIAL ITEM (TO INCLUDE 'COMMERCIAL
OF A TYPE')
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS ITEM IS DEFINED BY EITHER BY A MILITARY PART STANDARD, OR A PART
STANDARD PUBLISHED BY A CONSENSUS NON-GOVERNMENT STANDARDS ORGANIZATION.
HARDWARE MANUFACTURED TO THE CURRENT REVISION OF THE PART STANDARD
SPE4A6-26-T-998K
SECTION B
DEFINING THIS ITEM IS ACCEPTABLE.
HARDWARE MANUFACTURED IN THE PAST TO A PREVIOUS, BUT THEN CURRENT,
REVISION OF THE STANDARD IS ACCEPTABLE.
ANY HARDWARE MANUFACTURED FROM THE DATE OF THIS SOLICITATION FORWARD,
SHALL BE MANUFACTURED IN ACCORDANCE WITH THE CURRENT REVISION OF THE
PART STANDARD IN QUESTION.
IAW BASIC SPEC NR MIL-P-45952/1 NOT 4
REVISION NR DTD 09/10/2019
PART PIECE NUMBER: M45952/1-C4-06
IAW REFERENCE SPEC NR MIL-DTL-45952A NOT 2
REVISION NR A DTD 10/17/2024
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7006814264 0001 EA 1.000
NSN/MATERIAL:5315014473327
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W5872U
W6DX PEO GCS WARREN
SUMNER DISTRIBUTION CENTER
3700 150TH AVE CT EAST
SUMNER WA 98390-0000
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
SPE4A6-26-T-998K
SECTION B
PR: 7006814264 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
W5872U
W6DX PEO GCS WARREN
SUMNER DISTRIBUTION CENTER
3700 150TH AVE CT EAST
SUMNER WA 98390-0000
US
MARKFOR
W5872U
W6DX PEO GCS WARREN
SUMNER DISTRIBUTION CENTER
3700 150TH AVE CT EAST
SUMNER WA 98390-0000
US
M/F: (TCN) W9095340739003
RDD: 133
PROJ: G6D TP 2
SUPP ADD: W5872U SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: ADV: FC: 1Y
Need Ship Date:00/00/0000 Original Required Delivery Date:03/18/2024
SPE4A6-26-T-998K NSN/Part Number: 5315-01-447-3327 Quantity: 1 EA Purchase Request: 7006814264QTY: 1 Delivery: 20 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 750+ contractors already using CLEATUS