Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, October 14 at 2:00 PM ET

Register Free →

Search

Top

Back to Contracts

PIN, QUICK RELEASE

Awarded

SPE4A6-26-T-20EKFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract, identified by solicitation number SPE4A6-26-T-20EK, is for the procurement of 29 quick release pins, classified as a critical application item. The hardware must be manufactured in accordance with specific technical standards, specifically NASM17990 Revision 4 and NAS1332 Revision 9. The procurement is managed by the Defense Logistics Agency (DLA) through the ASC Commodities Division, with the items designated under NSN 5315-00-544-3178 and part number MS17990C824. The agreement mandates strict quality control and packaging protocols, including source inspection for critical items and sampling methods compliant with MIL-STD-1916 or ASQ H1331. All marking must adhere to MIL-STD-129, and packaging must follow MIL-STD-2073-1E and DLA requirements. Delivery is required within 169 days, with the final destination set for the DLA Distribution New Cumberland Facility in Pennsylvania. The contract specifies that inspection and acceptance will occur at the destination, and the manufacturer is responsible for ensuring all hardware meets the current revisions of the applicable part standards.

General Info

DLA procurement of 29 quick release pins for delivery to Pennsylvania within 169 days.

Agency

Department Of Defense → Defense Logistics Agency

Contract Value

$1,425.35

NAICS

339993 - Fastener, Button, Needle, and Pin Manufacturing

Place of Performance

Not specified

Set-Aside

NONE

Awardee

SPEC TECH USA INC

Award Issued Date

08/26/2026, 12:00:00 AM UTC

Documents

2

Order for Supplies or Services SPEA46-26-V-339V

award

High

RFQ SPE4A6-26-T-20EK

19 pages · rfq

High

AI Contract Breakdown

Uniform Contract Format

Contract not broken down yet

CLEATUS splits the solicitation into Uniform Contract Format (UCF) sections: scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseAwarded

PostedAug 19

Solicitation

AwardedAug 26

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → Defense Logistics Agency

Office AddressUSA

Contacts

Debra Fowler

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE4A626V339V posted on DIBBS. Awardee: SPEC TECH USA INC (CAGE 3LRU1) Total Contract Price: $1,425.35 Award Date: 08-26-2026 Solicitation: SPE4A6-26-T-20EK Line items: - PIN, QUICK RELEASE (NSN/Part 5315005443178, PR 7017914678)

Similar Contracts

Same NAICS industry code

INSERT, SCREW THREAD

Solicitation # SPE4A6-27-T-1219

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSERT, SCREW THREAD

Solicitation # SPE4A6-27-T-1257

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Plastic Insignia Buttons

Solicitation # M67854-26-I-5429

The United States Marine Corps, through the Program Manager, Combat Support Systems and Product Manager, Combat Service Support Equipment, is conducting market research via Request for Information M67854-26-I-5429 to identify capable manufacturers and suppliers of plastic insignia buttons. The requirement focuses on Type I 40-ligne and Type II 27-ligne buttons featuring the Marine Corps Eagle, Globe, and Anchor insignia. All products must conform to MIL-B-20289D standards, ensuring strict adherence to specifications regarding material, color, surface finish, and dimensional accuracy. The government is specifically seeking sources with existing tooling, production capacity, and established quality-control processes for molded plastic components. As this is a sources-sought effort and not a formal solicitation, no contracts will be awarded directly from this RFI. However, interested parties must submit a response of no more than ten pages by October 16, 2026, including detailed business information, UEI, and NAICS code 339993. Respondents are required to provide one gross of each button type for evaluation. Crucially, all proposed materials and manufacturing processes must comply with the Berry Amendment domestic-source requirements, meaning production must occur within the United States. Future solicitations may require first-article testing, laboratory validation, and formal government approval prior to production.

POSTED

DEADLINE

Manufacture of Straight Headed Pins (NSN 5315-01-614-1285)This subcontract involves the manufacture of three straight headed pins, identified by NSN 5315-01-614-1285 and part number SW37156, for the Department of Defense DLA Weapons Support Aviation Supply Chain. The contractor is required to use specialized tooling and dies for casting or forging, with a strict prohibition on the use of additive manufacturing. All items must undergo physical identification and bare item marking in accordance with RQ017. The project requires strict adherence to ASTM D3951 and MIL-STD-129 packaging standards to ensure quality and compliance. Performance will take place in Gatesville, Texas, under NAICS code 339993. The solicitation was posted on October 7, 2026, with a response deadline of October 15, 2026.

DLA WEAPONS SUPPORT AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

PIN, STRAIGHT, HEADLESS

Solicitation # SPE7L4-27-T-0130

DLA WEAPONS SUPPORT LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Precision Manufacturing of Threaded Pin-RivetsThis subcontract involves the precision manufacturing of 176 threaded pin-rivets for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The fabrication process must strictly adhere to NAS4450 and NAS4444 part standards, as well as the DLA Master List of Technical and Quality Requirements. Due to the critical application tolerances required for these components, the use of precision machining equipment is mandatory. To qualify for this project, the manufacturer must maintain certified quality systems under SAE AS9003 or ISO 9001. Additionally, strict cybersecurity compliance is required in accordance with NIST SP 800-171 and DFARS 252.204-7012. The final deliverable consists of 176 finished pin-rivets to be produced and managed under NAICS code 339993.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Solicitation # SPE4A6-27-T-0542

Solicitation SPE4A6-27-T-0542 is a fixed-price request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 149,000 machine keys (NSN 5315-01-531-4476). This requirement is designated as a critical application item and is set aside exclusively for Service-Disabled Veteran-Owned Small Businesses certified by the Small Business Administration. The items must conform to Technical Data Package Rev A Gen 1 per Basic Drawing NR 1NUW7 11581697 Revision E. Delivery is required within 120 days after award to DLA Distribution San Joaquin in Tracy, California, with a need ship date of February 12, 2027. The contract mandates strict quality and compliance standards, requiring manufacturers to maintain an inspection system complying with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Due to the nature of the technical data, the contract is subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification. Additionally, the solicitation incorporates CMMC Level 2 cybersecurity requirements and strict adherence to the Buy American Act and Berry Amendment regarding domestic sourcing. All payment requests and receiving reports must be processed electronically through the Wide Area WorkFlow system.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSERT, SCREW THREAD

Solicitation # SPE4A6-27-T-0378

Solicitation SPE4A6-27-T-0378, issued by the DLA Weapons Support ASC Commodities Division, is for the procurement of one screw thread insert, identified by NSN 5325016339318. The requirement specifies a delivery timeline of 20 days after order, with an original required delivery date of September 28, 2026. Delivery is to be made to the 0710 CS BN CO A Distribution center at Fort Polk, Louisiana, using the fastest traceable means, specifically prohibiting the use of parcel post. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and sampling methods per MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required. Contractors must utilize the Wide Area WorkFlow system for invoicing and payment requests. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and NIST SP 800-171 for cybersecurity. Additionally, the solicitation explicitly prohibits the use of additive manufacturing processes for the supplied parts unless specifically authorized.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

RFQ 1-Year Employee Service Pins Qty 200

Solicitation # BD-27-1053-1053C-CSR-133936

The Massachusetts Veterans Home at Holyoke, through the Central Supply department, has issued a closed, invitation-only Request for Quote (RFQ BD-27-1053-1053C-CSR-133936) for the procurement of 200 employee service pins. The pins are intended to commemorate one year of service and should measure approximately 1.25 by 1.25 inches. This opportunity is eligible under the Small Business Purchasing Program and is being conducted as an open market purchase. Interested vendors must submit their quotes by the bid opening deadline of October 12, 2026. Proposals are required to include unit pricing for the 200 pins, as well as bulk pricing options and the minimum production quantity required by the manufacturer. Technical specifications and visual requirements are provided in the solicitation attachments. The primary point of contact for this procurement is Purchaser Anibal Rivera.

1053CENTRALSUPPLY - Central Supply

POSTED

DEADLINE

Solicitation # SPE7LX-26-R-0103

Solicitation SPE7LX-26-R-0103 is a Firm Fixed Price request for proposal issued by the DLA Land and Maritime Strategic Acquisition Program Directorate for the procurement of molded pins, NSN 2530-01-630-3036. While the initial quantity was listed as 16,750 units, Amendment 0001 increased the purchase request quantity to 31,729 units, with an additional follow-on basic option quantity of 1,771 units. The required delivery date is 237 days after the date of award, with inspection and acceptance occurring at the destination, DLA Distribution Red River in Texarkana, Texas. The government will utilize a best-value trade-off process to make award decisions, evaluating factors including price, past performance via SPRS, proposed delivery, and socioeconomic support. Technical compliance requires adherence to specific source control drawings and the Technical Data Package Rev A Gen 1. Contractors must meet CMMC Level 1 Self certification and comply with DFARS cybersecurity and safeguarding requirements for covered defense information. Packaging and marking must strictly follow MIL-STD-2073-1E and MIL-STD-129, with specific protocols for Product Verification Testing samples if invoked by the contracting officer.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

PIN — 1680LLF02J608 — N0038327QQA01

Solicitation # NO03383-27-Q-AQ01

Solicitation NO03383-27-Q-AQ01, issued by NAVSUP Weapon Systems Support Philadelphia on October 1, 2026, seeks quotations for the procurement of five pins, specifically NSN 1680-LL-F02-J608 P8 (Part Number BACP18AM4L16HC6). The requirement is designated as other than small business, with a delivery deadline of 90 days FOB Destination to consignee SHIP TO NO0421. The government intends to make a single award based on the most advantageous offer, prioritizing past performance over price. Performance will be evaluated using the DoD Supplier Performance Risk System (SPRS), where offerors are rated by color based on their position within the Federal Supply Class group. The contract mandates strict adherence to quality and packaging standards, including ISO9001 for quality management and MIL-STD-2073 for packaging, with specific requirements for domestic and overseas shipments. Marking must comply with MIL-STD-129 and MIL-STD-130 for item unique identification. Key regulatory requirements include DFARS 252.204-7012 for cybersecurity and safeguarding covered defense information, as well as Buy American and Balance of Payments program compliance. Invoicing and receiving reports must be processed electronically through the Wide Area Workflow (WAWF) system. Offerors must be government-approved sources or submit necessary documentation per the NAVSUP WSS Source Approval Brochure with their email submission.

Navsup Weapon Systems Support

POSTED

DEADLINE

Solicitation # SPE1C1-26-R-0056

Solicitation SPE1C1-26-R-0056 is a 100 percent small business set-aside for an Indefinite Delivery/Indefinite Quantity firm fixed price contract to manufacture and supply AGSU Buckles, NSN 8315-01-683-9267, for the Department of Defense. The contract features a guaranteed minimum quantity of 60,000 units, an annual estimated quantity of 240,000 units per tier, and a maximum combined quantity of 1,495,000 units across five 12-month price tiers. All items must be manufactured in accordance with MIL-DTL-1963K dated September 4, 2019, utilizing copper base alloys and specific plating finishes. Deliveries are FOB Destination to the Pendergrass Distribution Center in Georgia, with a lead time of 120 days for the first order and 90 days for subsequent orders, capped at 9,500 pairs per month. Award will be determined using Best Value Source Selection Trade-Off Procedures, where non-cost factors are significantly more important than price. The primary evaluation factor is the submission of three Product Demonstration Models per item to verify manufacturing, visual, and dimensional requirements, though material shade will not be evaluated for these models. Other key evaluation criteria include past performance regarding recency, relevancy, and quality. Technical requirements include strict adherence to MIL-STD-129R for marking, the use of 13-digit NSN and 12-digit UPC barcodes on 100-pound bleached sulfate tags, and compliance with ISPM 15 for wood packaging materials. Proposals must be submitted via the DLA Internet Bid Board System by October 24, 2026.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

Specialized Freight & Oversized HaulingThis subcontract for Specialized Freight and Oversized Hauling supports prime contractors fulfilling Defense Logistics Agency supply contracts. The scope of work involves the loading, securing, and transportation of six completed oversized portable buildings from the manufacturer to various delivery points across the continental United States. The contractor is required to utilize flatbed trailers and cranes to execute these movements and must maintain all necessary DOT certifications for hauling oversized loads. This effort falls under NAICS code 484220 and is managed through the Department of Defense.

Specialized Freight (except Used Goods) Trucking, Local

POSTED

DEADLINE

Hazardous Material Containment Liners & Sump SystemsThis subcontract involves the manufacture, supply, and installation of secondary containment systems for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work requires the production and fitting of chemical-resistant liners or integrated sump basins, constructed from HDPE or other chemical-resistant polymers, for the base of two-tier hazardous material storage structures. The project specifically entails the delivery of integrated containment basins and liners for six units. All deliverables must strictly adhere to EPA and OSHA standards for secondary containment to ensure safety and regulatory compliance. The contract is categorized under NAICS code 339999 and is managed through the Department of Defense. Interested parties should note the response deadline of October 16, 2026.

All Other Miscellaneous Manufacturing

POSTED

DEADLINE

Specialized Steel Fabrication & AssemblyThis subcontract for Specialized Steel Fabrication and Assembly involves the production of structural frames and housings for prime contractors supporting Defense Logistics Agency supply contracts. The scope of work focuses on the precision cutting, welding, and assembly of industrial steel components to create Two-Tier Portable Hazardous Material Storage Buildings, specifically part number 30B-TT. Deliverables include the completed structural shells, which must feature two-tier shelving and outer protective shells finished with corrosion-resistant paint. All fabrication must strictly adhere to DLA safety specifications regarding hazardous material containment. This opportunity falls under NAICS code 332312 and was posted on October 9, 2026, with a response deadline of October 16, 2026.

Fabricated Structural Metal Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-306D

Solicitation SPE7MC-26-T-306D is a fixed-price request for quotations issued by the Defense Logistics Agency Land and Maritime for the procurement of one valve seat, identified by NSN 4820-01-485-2309. The item must be manufactured in accordance with Basic Drawing NR 53711 5001003, Revision R, and Reference Standard MIL-STD-1330E, Revision E. Delivery is required within five days after receipt of order to the Electric Boat Corporation in North Stonington, Connecticut, using the fastest traceable means. Inspection and acceptance will occur at the point of origin, and the manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. This procurement carries stringent technical and security requirements, including CMMC Level 2 certification and strict adherence to ITAR and EAR export controls. Technical data is restricted to approved contractors with US/Canada Joint Certification Program certification. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with specific mandates for oxygen clean packaging and DLA palletization requirements. The government will not evaluate offers utilizing additive manufacturing. Additionally, the solicitation provides a price evaluation preference for certified HUBZone Small Business Concerns and requires compliance with the Buy American Act and the Berry Amendment. Invoicing and receiving reports must be processed electronically through the Wide Area WorkFlow system.

Industrial Valve Manufacturing

POSTED

DEADLINE

LIMITER, ELECTRICAL NOI

Solicitation # SPE4A7-27-Q-0040

The Defense Logistics Agency, acting on behalf of the Department of Defense, has issued solicitation SPE4A7-27-Q-0040 for the procurement of six electrical limiters. The items are identified by NSN/Part Number 5895-01-447-6061 and are associated with purchase request 7017409225. This federal solicitation was posted on October 9, 2026, with a response deadline set for October 19, 2026. Interested parties can find further details and submission guidelines through the official DIBBS portal.

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-305Z

Solicitation SPE7MC-26-T-305Z is a fixed-price request for quotation issued by DLA Land and Maritime for the procurement of one gate valve, identified by NSN 4820014658423 and Circor Aerospace part number HV09-13-4. The requirement specifies a delivery timeline of five days after order, with the shipping destination located at Fort Hunter Liggett in Jolon, California. While the CLIN schedule indicates FOB Origin, both inspection and acceptance are designated to occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to DLA packaging and marking standards, specifically requiring compliance with MIL-STD-129 and RP001 for palletization, with ASTM D3951 serving as the general packaging standard. Technical and quality requirements are governed by the DLA Master List, which takes precedence over other packaging guidelines. Additionally, the contractor must ensure that mercury or mercury-containing compounds are not intentionally added to the hardware, per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with various FAR and DFARS clauses regarding the Buy American Act, cybersecurity safeguarding, and the prohibition of covered telecommunications equipment.

Industrial Valve Manufacturing

POSTED

DEADLINE

COMPRESSOR UNIT, REF

Solicitation # SPE8E8-26-T-5747

Solicitation SPE8E8-26-T-5747 is a request for quotations issued by the Defense Logistics Agency Troop Support for the procurement of one compressor unit, ref, identified by NSN 4130-01-518-3693. This is a Foreign Military Sales requirement for the Egyptian Navy, with the final shipping destination located in Alexandria, Egypt, via a freight forwarder at the Amentum Warehouse in Fredericksburg, Virginia. The procurement falls under NAICS code 333415 and may be eligible for automated award, with a specific price evaluation preference for HUBZone concerns. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following DLA requirement RP001. Delivery is required within five days after receipt of order, with both inspection and acceptance occurring at the point of origin. Key compliance requirements include the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Additionally, the contractor must ensure that mercury is not intentionally added to the hardware, except where functionally required and specified. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system.

Air-Conditioning and Warm Air Heating Equipment and Commercial and Industrial Refrigeration Equipment Manufacturing

POSTED

DEADLINE

VALVE, SAFETY RELIEF

Solicitation # SPE7MC-26-T-307E

Solicitation SPE7MC-26-T-307E is a request for quotations issued by the Defense Logistics Agency Land and Maritime for one safety relief valve, identified by NSN 4820015062499. The required hardware is a 3.000 inch valve with a bronze body and a pressure range of 45-75 PSI, specifically referencing Dante Valve Company part numbers BASHH05SKK and D3000FF ASSY BASHH05SKK. The government notes that manufacturing may require casting, forging, and special tooling, which may not be provided. A critical material restriction prohibits the intentional addition of mercury or mercury-containing compounds, with limited exceptions for functional components specified by NAVSEA. The contract stipulates a delivery timeframe of 20 days after order, with an original required delivery date of September 15, 2026. Delivery is FOB Origin and destined for the USS KEARSARGE LHD 3 via the First Destination Transportation program. Inspection and acceptance will occur at the destination per FAR 52.246-2. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. All quotes must be submitted through the DIBBS system, and the successful contractor must use the Wide Area WorkFlow system for electronic invoicing and payment requests.

Industrial Valve Manufacturing

POSTED

DEADLINE

Solicitation # SPE3SE-26-Q-0501

POSTED

DEADLINE

Solicitation # SPE8E8-26-T-5755

Solicitation SPE8E8-26-T-5755 is a fixed-price request for quotation issued by the Defense Logistics Agency Troop Support for the procurement of one End Plate, identified by NSN 4630011200494. This critical application item is designed for use with Air Master Products Corp Sewage Comminutor Model No. AMS5600 and Poseidon Submarine Air Pack Products Corp equipment. The requirement is an Foreign Military Sales procurement for Taiwan, with a required delivery date of July 16, 2025, and a delivery timeline of five days after order. Inspection and acceptance are both designated at the point of origin. The contract mandates strict adherence to DLA packaging requirements under RP001 and MIL-STD-2073-1E, with marking compliant with MIL-STD-129. Technical and quality standards are governed by the DLA Master List of Technical and Quality Requirements. Notable material restrictions prohibit the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Administrative requirements include the use of the Wide Area Workflow system for invoicing and payment. The solicitation also incorporates various FAR and DFARS clauses regarding the Buy American and Balance of Payments Program, safeguarding covered defense information, and representations concerning telecommunications equipment.

All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

DEADLINE

Solicitation # SPE7MC-26-T-305P

Solicitation SPE7MC-26-T-305P is a fixed-price request for quotation issued by the Defense Logistics Agency Land and Maritime for three stainless steel check valves, identified by NSN 4820009465482. These critical application items are designed for use in H-60 and RH-53 Sikorsky helicopters and must support a maximum operating temperature of 275 degrees Fahrenheit. Technical specifications require a 3/8 inch outer diameter and 9/16 inch right-hand thread on both ends, with mounting capabilities for horizontal and vertical bulkhead positions. Approved part numbers include Crissair Inc 2C 7390-6J and Sikorsky Aircraft Corporation SS70-912K6C or SS70-912K6J. The contract is a Foreign Military Sales requirement for the Government of Israel Ministry of Defense, with delivery coordinated through G&B Packing Company in Jersey City, New Jersey. Delivery is required within 20 days, with inspection and acceptance occurring at the point of origin. Packaging and marking must strictly adhere to MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirement RP001. All quotes must be submitted via the DLA Internet Bid Board System, and the contractor is required to use the Wide Area WorkFlow system for electronic invoicing and receiving reports.

Industrial Valve Manufacturing

POSTED

DEADLINE

BALL, VALVE, PORTED

Solicitation # SPE7MC-26-T-255C

Industrial Valve Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 750+ contractors already using CLEATUS