Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 16 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

PIN, QUICK RELEASE

Awarded

SPE4A6-26-T-17SYFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract is a solicitation for the procurement of 48 quick release pins under solicitation number SPE4A6-26-T-17SY, issued by the Department of Defense ASC Commodities Division. The items are classified as commercial products and must be delivered within 171 days after the order. Performance is located at Hill AFB, and the procurement is conducted as fully competitive in accordance with military or federal specifications. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards. Quality assurance is governed by sampling methods such as MIL-STD-1916 or ASQ H1331, with a general requirement for zero non-conformances in sample lots. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except in specific functional cases, and specifies that item unique identification is not required.

General Info

DoD solicitation SPE4A6-26-T-17SY for 48 quick release pins delivered to Hill AFB.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

Contract Value

$1,186.08

NAICS

339993 - Fastener, Button, Needle, and Pin ManufacturingView NAICS

Place of Performance

Not specified

Set-Aside

NONE

Awardee

CENTURY FASTENERS CORPView Profile

Award Issued Date

08/25/2026, 12:00:00 AM UTC

Documents

(2)

RFQ SPE4A6-26-T-17SY for DLA Aviation Automated Simplified Acquisitions

PDF•rfq

SPE4A626V325N.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseAwarded

PostedAug 16

Solicitation

AwardedAug 25

Contract was awarded

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

Contacts

Ahoefa Simons De Fanti

contact@example.gov

+1 (555) 000-0000

Full Description

Show more

DLA award SPE4A626V325N posted on DIBBS. Awardee: CENTURY FASTENERS CORP (CAGE 8R639) Total Contract Price: $1,186.08 Award Date: 08-25-2026 Solicitation: SPE4A6-26-T-17SY Line items: - PIN, QUICK RELEASE (NSN/Part 5315007024858, PR 7017917345)

Similar Contracts

Same NAICS industry code

Supply of Threaded Pin-Rivets (NSN 5320013650546)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Hexagon Nuts

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Quick Release Pins (NSN 5315013668827)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of PIN Components (NSN 5315-01-119-3092)

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Supply of Straight Headless Pins (NSN 5315000595845)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Interlocking Slide Fasteners (NSN 5325014676537)

LSO COMBAT VEHICLES AND ARMAMENT

POSTED

DEADLINE

Manufacturing and Supply of Threaded Pin-Rivets (NSN 5320013838739)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Close Tolerance Screws (NSN 5305016297647)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

INSIGNIA, RANK, OFFICER

Solicitation # SPE1C1-26-Q-0482

Solicitation SPE1C1-26-Q-0482 is a firm fixed price request for quotations issued by the DLA Troop Support C and T Supply Chain for 9,000 pairs of officer rank insignia, specifically subdued army diamond insignia under NSN 8455-01-088-7892. The contract requires all components to be of domestic origin in compliance with the Berry Amendment and mandates that the end product be manufactured by a vendor certified by the Institute of Heraldry. Delivery is required within 120 days after the order, with the destination and acceptance point set as Arizona Industries for the Blind in Phoenix, Arizona. The award will be based on the best value offer considering the total award price, provided the pricing is fair, reasonable, and balanced. Technical requirements include the submission of five first article samples within 30 days of the award for testing and notification. Packaging and marking must adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following DLA RP001 requirements. Administrative processes, including invoicing and receiving reports, must be managed through the Wide Area WorkFlow system.

C AND T SUPPLY CHAIN

POSTED

DEADLINE

STUD ASSEMBLY, TURNLOCK FASTENER

Solicitation # SPE4A6-26-R-XD24

This firm fixed price contract, identified as SPE4A6-26-R-XD24, is for the procurement of 827 turnlock fastener stud assemblies under NSN 5325-00-959-0432. The delivery is required within 117 days after the order is placed, with both inspection and acceptance occurring at the destination. The contract is a total small business set-aside issued by the Department of Defense ASC Commodities Division. The supplier must adhere to specific technical and quality requirements, including DLA packaging standards RP001, the removal of government identification RQ011, and physical item marking RQ017. Packaging must comply with ASTM D3951 and MIL-STD-129, while sampling and inspection must follow MIL-STD-1916 or ASQ H1331. Item Unique Identification is not required for this order.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Straight Headless Pins (NSN 5315000141346)

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Manufacture of Pin Rivets (NAS4452S05-08)

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → Defense Logistics Agency

Same awarding agency

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2418

This contract, identified as SPE7L7-26-Q-2418, is a firm fixed price solicitation by the Defense Logistics Agency for the procurement of sealed lead acid storage batteries (NSN 6140-01-624-9682). The requirement consists of two line items totaling eight units, with delivery expected 60 days after the order. This is a restricted source item requiring government engineering source approval, and it is designated as a critical application item. The batteries have a non-extendable shelf life of 12 months and must comply with specific hazardous material communication and packaging standards, including MIL-STD-2073-1E and MIL-STD-129. Quality assurance will be managed via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Shipments are destined for locations in Oregon and Hawaii, with strict prohibitions against the intentional addition of mercury except where functionally required.

Battery Manufacturing

POSTED

about 7 hours ago

DEADLINE

BATTERY, STORAGE

Solicitation # SPE7L7-26-Q-2419

This contract is a solicitation for the procurement of five storage batteries, part number PS-12100 F1 from Power-Sonic Corporation, under NSN 6140-01-294-6528. The items are designated as critical application items and must feature F1 quick disconnect tabs. The contract is established as a firm fixed price agreement with a delivery requirement of 60 days after the order is placed. Each unit is destined for a specific naval vessel, including the USS Stout, USS Laboon, USS Barry, USS Russell, and USS John S McCain. The batteries are classified as Type I items with a non-extendable shelf life of 12 months. Strict adherence to hazardous materials packaging, marking, and shipping standards is required, specifically prohibiting the intentional addition of mercury except where functionally necessary. Quality assurance will be managed through zero-based sampling plans in accordance with MIL-STD-1916 or ASQ H1331. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, with inspection and acceptance occurring at the point of origin.

Battery Manufacturing

POSTED

about 7 hours ago

DEADLINE

BATTERY ASSEMBLY

Solicitation # SPE7L7-26-Q-2417

This solicitation from the Defense Logistics Agency under the Department of Defense is for the procurement of two battery assemblies, identified by NSN 6140-01-664-6369. The contract requires delivery within 60 days after receipt of the order. Strict compliance is required regarding cybersecurity and export controls. The provider must be a CMMC Level 2 Certified Third-Party Assessment Organization and adhere to regulations concerning Covered Defense Information. Additionally, the technical data is subject to ITAR and EAR export controls, meaning access is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training.

Battery Manufacturing

POSTED

about 7 hours ago

DEADLINE

LIMITER, RADIO FREQU

Solicitation # SPE4A7-26-Q-1069

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE4A7-26-Q-1069 for the procurement of 49 radio frequency limiters. The items are identified by NSN/Part Number 1430-01-224-2273 and are associated with purchase request 7017409812. This federal solicitation was posted on September 11, 2026, with a response deadline of September 15, 2026. Interested parties should direct inquiries to the buyer via the DIBBS portal or the provided contact email.

Other Electronic Component Manufacturing

POSTED

about 7 hours ago

DEADLINE

COVERALLS, ANTI-EXPO

Solicitation # SPE1C1-26-Q-0498

The Defense Logistics Agency under the Department of Defense has issued solicitation SPE1C1-26-Q-0498 for the procurement of one unit of anti-exposure coveralls, identified by NSN/Part Number 8415-01-593-7934. This federal requirement is tracked under purchase request 7018286739. The solicitation was posted on September 11, 2026, with a response deadline of September 18, 2026. Interested parties should direct all inquiries to the buyer via the email address provided in the primary point of contact or through the DIBBS portal using the specific solicitation number.

Cut and Sew Apparel Manufacturing (except Contractors)

POSTED

about 7 hours ago

DEADLINE

GOVERNMENT FIT VERIFIC

Solicitation # SPE7L3-26-Q-1328

The Defense Logistics Agency within the Department of Defense has issued solicitation SPE7L3-26-Q-1328 for Government Fit Verific, identified by part number 0001S00000060. This federal procurement opportunity was posted on September 11, 2026, and requires a response by the deadline of September 28, 2026. The contract is managed under purchase request 7017604125, with specific quantity requirements detailed within the solicitation documents. Interested parties can access further details and submission guidelines through the DIBBS portal.

Testing Laboratories and Services

POSTED

about 7 hours ago

DEADLINE

POWER SUPPLY, UNINTERRU

Solicitation # SPE7L7-26-Q-2372

POSTED

about 7 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-T-5218

This contract, solicitation number SPE7L7-26-T-5218, is issued by the Defense Logistics Agency for the procurement of three storage batteries, specifically East Penn Manufacturing Co. part number 18-G75-21EE. The acquisition is designated as a total small business set-aside under NAICS code 335910. The items are classified as critical application items with a non-extendable shelf life of 12 months. Delivery is required within 20 days after receipt of order, with the destination and inspection point set as the NAVSUP FLC Material Process Center in Japan. The contract mandates strict adherence to technical and quality requirements, including MIL-STD-1916 or ASQ H1331 for sampling and MIL-STD-129 for marking. Specific packaging and shipping protocols for hazardous materials are required per IP025 and RP001. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds, except for functional mercury used in batteries as specified by NAVSEA. All packaging must comply with MIL-STD-2073-1E, and the items must be delivered FOB destination.

Battery Manufacturing

POSTED

about 12 hours ago

DEADLINE

46--MODIFICATION KIT,WATER

Solicitation # SPE8E8-26-T-5568

Solicitation SPE8E8-26-T-5568 is a Request for Quotations issued by the Defense Logistics Agency Troop Support, Construction and Equipment office, for the procurement of two water treatment equipment modification kits under NSN 4610017148561. The requirement specifically references HDT Expeditionary Systems Inc part number T00012-5083-2. This is a total small business set-aside under NAICS 333310, with a response deadline of September 21, 2026. Delivery is required within 20 days after receipt of order, with the destination for inspection and acceptance located at Camp Pendleton, California. The procurement requires electronic submission of quotes via the DIBBS system. Contractors must adhere to strict packaging and marking standards, including ASTM D3951 and MIL-STD-129, and follow DLA packaging requirements RP001. Invoicing and payment must be processed through the Wide Area WorkFlow system. Key regulatory compliance includes the Buy American Act, the Berry Amendment, and DFARS cybersecurity requirements for safeguarding covered defense information. Notably, the use of additive manufacturing for the supplied parts is prohibited unless specifically authorized.

Commercial and Service Industry Machinery Manufacturing

POSTED

about 12 hours ago

DEADLINE

61--BATTERY,STORAGE

Solicitation # SPE7L7-26-Q-2412

The Defense Logistics Agency, through DLA Land and Maritime, has issued Request for Quotations SPE7L7-26-Q-2412 for the procurement of 100 nickel-cadmium wet storage batteries (NSN 6140-01-241-2296). These batteries are specified as wet, discharged, and spillable, with a non-extendable shelf life of 36 months. Approved sources include Aerodesign, Inc. (P/N AD-31004-04C) and Marathonnorco Aerospace, Inc. (P/N 31004-04C). The items are to be delivered to the Royal Saudi Air Force within 60 days after the order date. This is a fixed-price solicitation where award will be based on the best value to the government, evaluating technical conformity, past performance, and offered delivery time. Because the batteries are classified as corrosive materials (UN2795), the contractor must strictly adhere to hazardous materials regulations, including ICAO, IMDG, 49 CFR, and AFJMAN 24-204. Packaging must comply with MIL-STD-2073-1E Level B, Pack Code Q, using 4G fiber-board boxes. Inspection will be conducted by DCMA at the distributor or OEM site, with acceptance occurring at the origin. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and receiving reports. The contract incorporates various FAR and DFARS clauses, including the Buy American and Balance of Payments Program and strict cybersecurity reporting requirements under DFARS 252.204-7012. Quotes must be submitted electronically by the deadline of September 17, 2026.

Battery Manufacturing

POSTED

about 12 hours ago

DEADLINE

53--ANODE,CORROSION PREVEN

Solicitation # SPE4A6-26-Q-1423

The Defense Logistics Agency is soliciting quotes for the procurement of six corrosion prevention anodes under National Stock Number 5342013978773. This requirement is identified by solicitation number SPE4A6-26-Q-1423 and is designated as a total small business set-aside under NAICS code 332994. The approved source for this item is 6RDX4 W3T106427. Items must be delivered to DLA Distribution San Joaquin within 190 days after the order is placed. Interested responsible sources must submit their electronic quotes by the deadline of September 21, 2026. The solicitation is available exclusively online via the DIBBS portal, as no hard copies or separate technical drawings are provided.

Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 12 hours ago

DEADLINE

Supply of Fluid Pressure Regulating Valves (NSN 4820014623023)

Fluid Power Valve and Hose Fitting Manufacturing

POSTED

DEADLINE

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Join 650+ contractors already using CLEATUS