Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN, QUICK RELEASE

Active
SPE4A6-26-T-05GEFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of a quick release pin identified by NSN 5315-01-367-4891 and part number MS17985C524, with a quantity of 19 units to be delivered within 20 days FOB origin. The item is designated as a critical application item and must comply with the non-government standard NASM17985 Revision 2, dated February 29, 2016, and referenced technical documentation TDP Rev A Gen 1 in accordance with NAS1332 Revision 9. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over other standards, and include specific mandates for packaging under MIL-STD-129 and ASTM D3951, with palletization aligned to DLA Packaging Requirements. Inspection and acceptance are to occur at origin using zero-defect sampling criteria consistent with MIL-STD-1916 or ASQ H1331, and any unspecified attributes are treated as major with a verification level of IV or AQL of 1.0. The item must be marked and labeled per government standards, and government identification must be removed from non-accepted supplies. The delivery address is RAF Lakenheath, Building 1035, Suffolk, United Kingdom, with a required delivery date of May 1, 2026. Unit of issue is each, total price is $19.00 per unit, with no variance permitted in quantity. All packaging, marking, and transportation must follow DLA procedural notes C19 and C20, and the contract includes detailed government use codes for tracking and distribution.

General Info

Procure 19 quick release pins NSN 5315-01-367-4891 by July 17, 2026, via DLA competitive solicitation.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-05GE.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ericka Mosley
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,QUICK RELEASE
PIN, QUICK RELEASE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD NAS1332 REVISION NR 9 DTD 10/31/2012 PART PIECE NUMBER:
TDP Rev A Gen 1
SPE4A6-26-T-05GE
SECTION B
IAW REFERENCE NON GOVT STD NASM17985
REVISION NR 2 DTD 02/29/2016
PART PIECE NUMBER: MS17985C524
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016620049 0001 EA 19.000
NSN/MATERIAL:5315013674891
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
FB5587
FB5587 48 FW LRS
CP 011 44 1638 52 3315
RAF LAKENHEATH BLDG 1035
SUFFOLK IP27 9PN
GB
RDD 777 SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
FB5587
FB5587 48 FW LRS
CP 011 44 1638 52 3315
RAF LAKENHEATH BLDG 1035
SUFFOLK IP27 9PN
GB
SPE4A6-26-T-05GE
SECTION B
PR: 7016620049 PRLI: 0001 CONT’D
MARKFOR
FB5587
FB5587 48 FW LRS
CP 011 44 1638 52 3315
RAF LAKENHEATH BLDG 1035
SUFFOLK IP27 9PN
GB
M/F: (TCN) FB558761180123
RDD: 777
PROJ: 780 TP 2
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 08
DIC: A01 DIST: 01 ADV: FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:05/01/2026
SPE4A6-26-T-05GE NSN/Part Number: 5315-01-367-4891 Quantity: 19 EA Purchase Request: 7016620049QTY: 19 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
Supply of Protective Dust and Moisture Seal CapsThe contract calls for the supply of 1,497 protective dust and moisture seal caps, identified by NSN 5340-01-632-8239 and part number 806661-01, for use by the Department of Defense. These components are critical for safeguarding equipment against environmental exposure, ensuring operational readiness in demanding conditions. Delivery must be completed in accordance with defense logistics standards, and all invoicing must comply with the Wide Area WorkFlow system to facilitate seamless payment processing and contractual accountability. The requirement is classified as a subcontract under NAICS code 332510, indicating manufacturing of other fabricated metal products, and performance is specifically designated for New Cumberland, Pennsylvania, with ZIP code 17070-5002. The solicitation was posted on July 17, 2026, with responses due by July 23, 2026, providing a narrow six-day window for qualified vendors to submit proposals. The contract is managed under the Land Supply Chain division of the Department of Defense, underscoring its importance to ground equipment maintenance and logistics sustainment.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLEThe contract specifies the procurement of 106 straight headless pins with NSN 5315-01-191-8775 under solicitation SPE4A6-26-T-05CD, with a delivery requirement of 95 days after contract award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless amended. Packaging must comply with DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals or requests for variance, and inspection and acceptance must occur at the origin. Government identification must be removed from non-accepted items, and export control under ITAR or EAR applies to associated technical data, restricting access to authorized contractors who hold JCP certification, complete mandatory DOD training, and pass the DLA export-controlled data questionnaire. Export control obligations extend to foreign nationals regardless of location and include foreign subsidiaries of U.S. companies. The point of contact is Warren Wright at the Department of Defense’s ASC Commodities Division, with performance located in New Cumberland, PA, and responses due by July 22, 2026.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PIN, THRUSTThe contract involves the purchase of 31 thrust pins with NSN 5315-00-009-5753 under solicitation number SPE4A5-26-T-213H, issued by the Defense Logistics Agency on behalf of the Department of Defense. The solicitation was posted on June 4, 2026, with a response deadline of June 12, 2026, and is classified under NAICS code 332721, indicating it pertains to the manufacturing of machine shops and turned products. The procurement is a federal opportunity with no set-aside designation, open to all eligible respondents, and performance is expected to occur within the United States. All inquiries and submissions must be made through the DIBBS portal using the provided UI link, and no specific point of contact or physical delivery address is listed in the contract data.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
PLATE, MOUNTINGThe contract is for one mounting plate with NSN 5340-01-618-0709 and part number 2BF205, procured under solicitation SPE7L1-26-T-797L for the Department of Defense through the Land Supply Chain. Delivery is required within 10 days of award, FOB origin, with no tolerance for quantity variance. The item must be packaged in strict accordance with MIL-STD-2073-1E and marked per MIL-STD-129 with no special marking codes applied. Packaging must comply with DLA’s procurement requirements, including palletization standards and use of specific containment and preservation methods. All shipments must be sent by the fastest traceable means, excluding parcel post, to the designated military address in El Paso, Texas. The delivery destination and mark-for address are identical, linked to a specific unit and building within the installation. Inspection and acceptance occur at the destination point. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications, with the applicable revision determined by the solicitation or award date. The required delivery date is July 1, 2026, and the contract includes government-only codes for tracking and logistics use.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
SPACER, PLATEThe contract pertains to the procurement of a Spacer, Plate with NSN 5365-00-468-1081 and part number 568-1009-01, manufactured by ACRO AVIATION, INC., classified as a Critical Application Item. A total quantity of 18 units is required at a unit price of $18.00, resulting in a total contract value of $324.00. Delivery is to be made FOB origin within 85 days of contract award, with inspection and acceptance occurring at the destination. The item must comply with stringent technical and quality requirements as defined in the DLA Master List of Technical and Quality Requirements, including sampling per MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. Critical attributes must be verified at Level VII with an AQL of 0.1, while unspecified attributes are considered major. The item must be mercury-free and physically marked in accordance with RQ017. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with no special marking required. Palletization and packaging must meet DLA’s official procurement standards. The delivery destination is Arizona Industries for the Blind in Phoenix, AZ, and transportation details are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE4A7-26-T-561K, with a response deadline of July 22, 2026, and the contract falls under NAICS code 332510.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, DUST
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 6 days
View Details
NAICS: 332510
New
DIBBS
HOOK, DOOR
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
INSERT, SELF-LOCKINGThis contract mandates the supply of 681 units of an INSERT, SELF-LOCKING item identified by NSN 5340-01-536-3545, with a delivery deadline of 250 days after award. All items must comply with MIL-STD-130N for Item Unique Identification (IUID) and DFARS 252.211-7003, requiring permanent marking per U.S. military property standards. Strict packaging guidelines from MIL-STD-2073-1E and MIL-STD-129 apply, including special oxygen cleaning and marking per IP042, with palletization conforming to DLA packaging requirements. The item must be free of asbestos and any intentional use of mercury or mercury-containing compounds, except for specific exempted applications such as batteries, fluorescent lights, or instrument controls that meet NAVSEA 5100-003D containment requirements. Inspection and acceptance occur at origin, with zero variance allowed in quantity. Packaging must include designated materials, containment types, and special marking code ZZ, with all units shipped to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract incorporates technical standards referenced via R and I numbers from the DLA Master List, with revisions governed by solicitation or award dates depending on acquisition size. Transportation and shipping details are governed by DLAD procedural notes C19 and C20.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
HOLDER, SPRINGThis contract specifies the procurement of 149 units of a spring component identified by NSN 5340-01-484-8692 and part number 12417471-003, under solicitation SPE7L1-26-T-741T. Delivery is required within 116 days to the DLA Distribution Red River facility in Texarkana, Texas, with FOB origin terms and no variance allowed in quantity. The item is marked as a critical application item and must comply with MIL-STD-130N for identification marking and MIL-STD-129 for packaging and marking, with no special marking required. Packaging must adhere to MIL-STD-2073-1E, including specific preservation methods, container types, and palletization requirements per DLA’s packaging guidelines. The contract incorporates technical and quality requirements referenced from the DLA Master List, and applicable defense information protocols under RD003. The delivery must be completed by June 18, 2026, though the original required date is March 8, 2027. All shipments must reference DLA transport procedures C19 and C20, and the item is subject to inspection and acceptance at the destination. The solicitation was issued on July 17, 2026, with responses due by July 22, 2026.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThis contract specifies the procurement of 14 blind rivets identified by NSN 5320-01-412-1275 and part number 0B100-EU12-12, with an alternate part number CR7650S-12-12, sourced exclusively from approved manufacturers including SPS Technologies LLC, Alcoa Global Fastening Systems, and Textron Fastening Systems Inc. The item is classified as a commercial item and is source-controlled, meaning it must be manufactured and tested using proprietary limited rights data that only authorized vendors with traceability to approved sources may access; no government-provided data is available. Compliance with the DLA Master List of Technical and Quality Requirements takes absolute precedence over all other standards, with sampling governed by MIL-STD-1916 or ASQ H1331 using zero-defect acceptance criteria unless otherwise noted, and critical attributes must meet the strictest verification levels. The rivets are designated as a critical application item requiring physical identification and bare item marking per RQ017, and all packaging must adhere to MIL-STD-129 and ASTM D3951, with palletization following DLA’s RP001 packaging guidelines. Delivery is mandated FOB origin with a 16-day lead time, required for arrival by April 13, 2026, and inspection and acceptance occur at the destination facility at Hill Air Force Base, Utah. The contract prohibits any quantity variance, requiring exact fulfillment of the 14-unit order at a unit price of $14.00 for a total price of $196.00. The item is subject to Covered Defense Information protocols under RD003, and vendors considering source approval must submit a SAR package. All labeling, documentation, and shipment details must align with the contract’s designated unit of issue and packaging specifications, and transportation instructions are governed by DLAD Proc Notes C19 and C20. The solicitation number is SPE4A6-26-T-05BX, with a response deadline of July 17, 2026, and the contracting office is the Department of Defense’s ASC Commodities Division, managed by point of contact Warren Wright.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 4 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541330
New
DIBBS
Government First Article Inspection and TestingThe contract requires the performance of a first article inspection and testing on an aircraft structural fitting to ensure full compliance with drawing 7574876. This includes detailed dimensional measurements, verification of material specifications, non-destructive testing, and the preparation of a formal inspection report. All work must demonstrate adherence to the technical requirements outlined in the drawing and meet applicable quality standards for aerospace components. The effort is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses can bid, and it is classified under NAICS code 541330, which pertains to engineering services. The solicitation was posted by the ASC Commodities Division of the Department of Defense and is open for response until July 27, 2026, with no specific location provided for performance.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332312
New
DIBBS
Precision Manufacturing of Aircraft Structural FittingThe contract involves the precision manufacture of a critical safety aircraft structural fitting identified by Part Number S03-02-R-100, following the specifications outlined in drawing 7574876. The scope encompasses full production lifecycle activities including material sourcing, machining, heat treatment, and surface finishing, all required to meet stringent aerospace industry standards for structural integrity, durability, and safety compliance. All work must be performed in accordance with applicable aerospace quality and inspection protocols to ensure the component meets mission-critical performance requirements. This is a total small business set-aside under the SBA program as defined by FAR 19.5, with the NAICS code 332312 classifying it under forge and stamping manufacturing. The contract is issued under the Department of Defense’s ASC Commodities Division and is structured as a subcontract. Proposals must be submitted by the deadline of July 27, 2026, with the solicitation published on July 17, 2026. All manufacturing activities are expected to adhere to defense supply chain requirements, and the place of performance is not specified, implying flexibility as long as compliance and delivery obligations are met.
Fabricated Structural Metal Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Assurance and Inspection at OriginThe contract titled Quality Assurance and Inspection at Origin requires the contractor to perform inspection and acceptance of supplies at the point of production or packaging, in strict adherence to contract clause 52.246-9008. This work is designated as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to participate as defined by the SBA and FAR 19.5. The NAICS code 541330 identifies the scope as ranging within architectural, engineering, and related services, indicating the nature of the quality assurance activities involves technical oversight and compliance evaluation rather than direct manufacturing. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026, and is managed by the ASC Commodities Division within the Department of Defense, though specific point of contact and place of performance details are not provided. The contract emphasizes the importance of ensuring supplies meet required standards prior to shipment, with inspections conducted directly at the origin, which may include facilities across various locations. Compliance with the referenced clause mandates adherence to federal procurement quality assurance procedures, requiring detailed documentation, evaluation criteria, and acceptance protocols to be followed during inspection. The absence of explicit location or contact information suggests the contractor must be prepared to perform at any production or packaging site tied to the supply chain, and the lack of defined city or state for performance implies a potentially nationwide scope requiring logistical flexibility and readiness to deploy inspection personnel as needed. The contract is accessible through the DIBBS portal for further procedural details.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
ITAR/EAR Compliance and Export-Controlled Data HandlingThe contract mandates strict compliance with ITAR and EAR regulations for all suppliers and subcontractors handling export-controlled technical data, ensuring that only authorized entities with proper registration and documentation are engaged in work involving sensitive information. All parties must demonstrate adherence to U.S. export control laws as a condition of participation, with failure to comply potentially resulting in termination or penalties. The solicitation is designated as a Total Small Business Set-Aside under the SBA program, restricting eligibility to small businesses as defined by the NAICS code 541611, which pertains to management consulting services. The award is issued by the ASC Commodities Division under the Department of Defense, with responses due by July 27, 2026, and performance expected to occur under the terms of a subcontract agreement. Participation requires proactive verification of regulatory standing and ongoing compliance monitoring for the duration of the contract.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Subcontracting Plan Compliance and Small Business OutreachThe contract requires the development and execution of a federal subcontracting plan designed to ensure compliance with Department of Defense regulations and Small Business Administration guidelines for maximizing participation by disadvantaged, minority, and women-owned businesses. The goal is to meet specific targets for DBE, MBE, and WBE subcontracting as mandated by the Federal Acquisition Regulation and SBA rules, with all activities aligned to a total small business set-aside under FAR 19.5. The work focuses on strategic outreach, monitoring, documentation, and reporting to demonstrate consistent adherence to small business utilization standards throughout the contract performance period. The solicitation, issued under NAICS code 541611 for management consulting services, is administered by the ASC Commodities Division within the Department of Defense and is open for response through July 27, 2026. All subcontracting efforts must be structured to promote equitable access and measurable outcomes for certified small, minority, and women-owned businesses, with full transparency and accountability required in tracking participation. The successful contractor will be responsible for designing, implementing, and sustaining a comprehensive subcontracting strategy that aligns with federal obligations and supports the agency's commitment to small business procurement goals.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332999
New
DIBBS
Critical Safety Item (CSI) Manufacturing and SupplyThe contract involves the manufacture and delivery of Critical Safety Items specified by the U.S. Navy, with stringent requirements for sourcing controls, component traceability, and full compliance with defense-specific technical and quality standards. These items are essential to mission-critical systems and must be produced under strict regulatory oversight to ensure reliability and safety throughout their lifecycle. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses certified by the Small Business Administration are eligible to respond, and the NAICS code 332999 indicates the work falls under other fabricated metal product manufacturing. All production and delivery activities must adhere to military specifications, and suppliers are expected to implement robust documentation and audit-ready tracking systems for every component and process step. The solicitation was posted on July 17, 2026, with a deadline for responses on July 27, 2026, and is managed by the ASC Commodities Division under the Department of Defense. There is no specified place of performance, suggesting flexibility in manufacturing locations provided all requirements are met, and no point of contact is listed, implying inquiries must be directed through the official DIBBS portal referenced in the link. The nature of the work demands a high level of precision and accountability, with failure to meet traceability or compliance standards likely resulting in disqualification or contract termination. Suppliers must be prepared to demonstrate proven capability in handling sensitive defense components and maintaining data integrity across the supply chain.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Product Verification TestingThe contract requires the performance of in-process and final inspections on bushing assemblies in accordance with MIL-STD-1916 or ASQ H1331 standards, ensuring compliance with rigorous quality and verification protocols. The contractor is responsible for generating accurate test reports and providing full support to Government acceptance activities, demonstrating consistent adherence to defense-grade quality requirements throughout the production lifecycle. This work is critical to validating the integrity and functionality of components used in defense systems. This is a small business set-aside subcontract under the SBA program, classified under NAICS code 541330, and issued by the ASC Commodities Division of the Department of Defense. The solicitation was posted on July 17, 2026, with a response deadline of July 27, 2026. While specific location details are not provided, the place of performance is tied to defense operations under the DLA umbrella, and all submissions must be made through the designated DIBBS portal. The contract emphasizes the need for qualified small business entities capable of delivering precise inspection services under strict military specifications.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 483112
New
DIBBS
Domestic and International Freight Logistics (U.S.-Flag Vessel Compliance)The contract requires the arrangement of domestic and international freight logistics for the shipment of bushing assemblies to locations within the continental United States, with strict adherence to U.S.-flag vessel requirements mandated by the Cargo Preference Act for all ocean freight portions. This ensures compliance with federal regulations that prioritize the use of American-owned and flagged vessels for the transportation of government cargo. The solicitation is structured as a subcontract under a Total Small Business Set-Aside designation, exclusively available to small businesses certified by the Small Business Administration, and is classified under NAICS code 483112, which pertains to foreign ocean transportation. The opportunity was posted on July 17, 2026, with a response deadline of July 27, 2026, and is overseen by the ASC Commodities Division of the Department of Defense, with performance tied to U.S. domestic destinations. The requirement emphasizes logistical precision, regulatory compliance, and small business participation in fulfilling defense-related supply chain needs.
Deep Sea Passenger Transportation

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Traceability and Documentation ManagementThe contract requires the maintenance of fully auditable records to ensure complete traceability of material origin, certifications, inspections, and adherence to all Government traceability mandates, specifically in compliance with DFARS requirements. All documentation must support transparency and accountability throughout the supply chain, enabling verification of source materials and compliance with defense contracting standards. The contractor must implement systems and procedures capable of sustaining rigorous audit readiness and meeting every contractual obligation related to documentation integrity and regulatory compliance. This is a small business total set-aside subcontract under NAICS code 541611, issued by the Department of Defense’s ASC Commodities Division. Responses are due by July 27, 2026, and performance is expected to align with federal defense supply chain protocols. The contract emphasizes strict adherence to traceability standards and requires proven capability in managing complex documentation systems under federal oversight. While specific location details are not provided, all work must satisfy DoD requirements for origin verification and material accountability.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 493190
New
DIBBS
Packaging, Marking, and Labeling ServicesThe contract seeks qualified small businesses to provide military-compliant packaging, preservation, and labeling services for bushing assemblies, adhering strictly to DLA and MIL-STD-129 standards. Essential requirements include accurate barcode application, application of special handling labels, and full compliance with defense logistics protocols to ensure traceability, durability, and readiness for military distribution. The work must be performed in accordance with federal regulations governing packaging integrity and labeling accuracy to support the Department of Defense’s supply chain standards. This is a total small business set-aside under NAICS code 493190, restricted exclusively to small businesses as defined by the SBA, and is issued as a subcontract by the ASC Commodities Division within the Department of Defense. Responses are due by July 27, 2026, with the solicitation posted on July 17, 2026, and all work expected to align with DLA’s logistical demands for defense components. The place of performance and point of contact details are not specified, but all proposals must demonstrate readiness to meet stringent military packaging and documentation requirements without deviation.
Other Warehousing and Storage

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332710
New
DIBBS
Precision Machining of Bushing Assembly (NSN 5365-01-541-2220)The contract pertains to the manufacture and delivery of precision bushing assemblies identified by NSN 5365-01-541-2220, requiring strict adherence to military specifications throughout production. Work includes CNC machining to exact tolerances, comprehensive inspection processes, and full compliance with traceability and packaging standards mandated for defense applications. The contract is structured as a subcontract under a total small business set-aside, reserved exclusively for small businesses as defined by the SBA under FAR 19.5, with the NAICS code 332710 applicable to forged and stamped metal product manufacturing. The opportunity was posted on July 17, 2026, with responses due by July 27, 2026, and is issued by the ASC Commodities Division under the Department of Defense. Performance is expected to occur at an undefined location, and all deliverables must meet federal defense supply chain requirements, ensuring readiness for military use.
Machine Shops

POSTED

about 15 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335931
New
DIBBS
Small Business and DBE/MBE/WBE Subcontracting ParticipationThis contract opportunity is designed to facilitate participation by small, disadvantaged, minority-owned, and women-owned businesses in supply or compliance roles under a prime contract managed by the ASC Commodities Division within the Department of Defense. The solicitation, identified by the NAICS code 335931, focuses on subcontracting engagement and does not specify a set-aside type, meaning it is open to qualified entities meeting ownership and size criteria without formal classification under a specific program. Interested businesses must respond by the deadline of August 16, 2026, to be considered for inclusion in the workforce supporting the prime contract's delivery and compliance requirements. The work will be performed without a specified geographic location, indicating potential flexibility in performance sites. Participation is facilitated through the DIBBS platform, where full details and submission protocols can be accessed.
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 29 days
View Details