This Solicitation opportunity from Department Of Defense was posted on September 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PIN, QUICK RELEASE

Closed

SPE4A6-26-T-33BSFederal

Submission Closed09/25/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # N0010426QAB90

This contract pertains to the manufacture of the HOIST STRAP ASSY with part number 5641754-303 and CAGE code 53711, issued as a total small business set-aside under NAICS code 332510 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania. Performance is required to comply strictly with specified drawings, including REV_E of drawing 5641754, and all applicable military standards such as MIL-STD-130 for marking, MIL-STD-973 for configuration control, and MIL-STD-2073 for packaging. The contractor must adhere to detailed quality assurance protocols, including self-inspection responsibilities, recordkeeping for 365 days after final delivery, and submission of all engineering change proposals and deviation requests to the designated government office. Delivery is mandated within 90 days, and final acceptance is subject to government inspection under FAR 52.246-2. All contractual documents are deemed issued upon electronic transmission, email, or facsimile, with acceptance of the proposal forming a binding agreement. The solicitation number is N0010426QAB90, with a response deadline of July 6, 2026, and access to technical drawings is available via SAM.gov. The contractor must obtain referenced documents from authorized sources including DODSSP and NAVICP-MECH, with special handling required for NOFORN and Official Use Only materials. The point of contact is Amanda R. Hayward, and payment instructions follow the Wide Area Workflow system, with inspection and acceptance occurring at the source. Compliance with cybersecurity maturity model requirements, child labor certification, and equal opportunity regulations for workers with disabilities is also required, alongside adherence to national defense priority ratings and applicable small business program representations.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Rail Fastening SystemsThis subcontract involves the supply of rail fastening systems and associated accessories for prime contractors working on Maryland Transit Administration light rail projects. The scope of work requires the provision of fasteners and tie anchor systems that are fully compatible with both standard and restraining rail concrete ties, ensuring all materials adhere to MTA and AREMA specifications. The specific deliverable for this contract is the provision of complete rail fastener sets for 1,000 concrete ties. Interested parties must submit their responses by November 17, 2026, in accordance with the solicitation posted on October 27, 2026.

Maryland Transit Administration

POSTED

DEADLINE

BABAA Compliant Reclamation Materials SupplierThis subcontract opportunity is for a supplier to provide specialized reclamation materials for prime contractors working on Virginia Department of Energy projects. The required supplies include 1/4 inch and 5/16 inch galvanized steel wire rope, galvanized earth and rock anchors from MacLean Power Systems or an equivalent brand, and certified seed and agricultural limestone. All materials must be delivered directly to the project site located in Blacksburg, Virginia. A critical requirement for this contract is the provision of formal certification ensuring all materials comply with the Build America, Buy America Act. Interested parties must submit their responses by November 2, 2026, to be considered for this procurement under NAICS code 332510.

Virginia Department of Energy

POSTED

DEADLINE

Supplier of Retaining Rings (NSN 5325-01-321-3445)

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture and Supply of T-Bolt ChocksThis subcontract involves the manufacture and supply of 247 T-Bolt Chocks for the Department of Defense, specifically supporting DLA Weapons Support Land Supplier operations. The project requires precision machining and forming to meet Oshkosh Defense LLC part number 3361032 and NSN 5340014799208 specifications. Production must be carried out using CNC lathes and threading machines, ensuring all materials adhere to strict grade and alloy requirements. The contractor is obligated to comply with the Buy American Act and the DLA Master List of Technical and Quality Requirements. Performance of the contract will take place in New Cumberland, Pennsylvania. The procurement falls under NAICS code 332510, with a response deadline set for November 9, 2026.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Manufacturer of Headless Straight Pins (Critical Safety Item)This subcontract involves the manufacture of 15 headless straight pins for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires precision machining and forming according to NSN 5315-00-182-5721 specifications, with performance taking place in Tracy, California. Due to the nature of the components, the manufacturer must adhere to Air Force Critical Safety Item quality standards and maintain SAE AS9100 or an equivalent aerospace quality management system certification. Additionally, all production must comply with the Berry Amendment and Buy American Act regarding domestic sourcing.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Supply of Mounting Brackets (NSN 5340017253800)This subcontract involves the manufacture or procurement of four mounting brackets under NSN 5340017253800 for prime contractors supporting the DLA Weapons Support Land Supply Chain. The contractor is responsible for ensuring all items undergo FAA Bare Item Marking per RQ046, with packaging and marking adhering to MIL-STD-2073-1E and MIL-STD-129 standards. Performance will take place in New Cumberland, Pennsylvania, under NAICS code 332510. Strict compliance is required regarding zero-based sampling plans and supply chain traceability as outlined in DLAD Procurement Note C03. Additionally, the provider must meet all requirements of the Buy American Act and NIST SP 800-171. The final deliverable consists of four marked and packaged brackets delivered in accordance with the specified Department of Defense guidelines.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of NSN 5340016806874This subcontract through the Department of Defense DLA Weapons Support Land Supply Chain requires the provision of 100 units of hardware component NSN 5340016806874. The selected vendor is responsible for manufacturing or sourcing the material and ensuring all items are packaged and marked in strict accordance with MIL-STD-2073-1E, RP001, MIL-STD-129, and RQ011 standards. Delivery of the components is required FOB Origin. Eligible bidders must hold Small Business certification and operate under NAICS code 332510. The solicitation was posted on October 27, 2026, with a response deadline of November 9, 2026. This contract supports prime contractors fulfilling broader DLA supply obligations.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Lever Brackets (NSN 5340016707390)

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supply of Mortise Latches (NSN 5340-00-794-0722)This subcontract involves the supply of 64 mortise latches, identified by NSN 5340-00-794-0722, for prime contractors supporting the Defense Logistics Agency Weapons Support Fluid Handling Division. The selected provider is responsible for manufacturing or sourcing the units and ensuring strict adherence to quality control standards per MIL-STD-1916 or ASQ H1331 Table 1. All items must be packaged and marked according to MIL-STD-129 and the DLA Master List of Technical and Quality Requirements. The final delivery of the 64 packaged and labeled units is designated as FOB Origin, with the place of performance located at Tinker AFB.

DLA WEAPONS SUPPORT FLUID HANDLING DIVISION

POSTED

DEADLINE

Turnlock Fastener Stud Supplier

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacturing and Supply of Clamp Loops (NSN 5340011313132)This subcontract involves the manufacture and supply of 437 Clamp Loops (NSN 5340011313132) for prime contractors supporting the DLA Weapons Support Active Devices Division. The project requires strict adherence to MIL-DTL-85052/1C Revision C and MIL-DTL-85052B Revision B specifications, as well as TDP Rev A Gen 1. All units must be of domestic origin and classified as Critical Application Items, with the supplier maintaining Qualified Products List approval. The contract is managed under NAICS code 332510 for the Department of Defense, with the place of performance located at Robins Air Force Base. Delivery of the 437 units is required on a FOB Origin basis. Interested parties must respond by the deadline of November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 12 days

AI Contract Overview

Solicitation SPE4A6-26-T-33BS is a Request for Quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 300 quick release pins, identified by NSN 5315010724800. The items must be manufactured and inspected in accordance with technical standards NASM17984 Revision 3 and NAS1332 Revision 9. The original required delivery date is June 18, 2027, with a need ship date of March 16, 2027. Delivery is set as FOB Origin, with the final destination being DLA Distribution San Diego, California. The contract mandates strict quality and packaging standards, requiring manufacturers to comply with SAE AS9003 or ISO 9001. Inspection and acceptance will occur at the origin, utilizing sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Notably, the government will not evaluate or award contracts to offers utilizing additive manufacturing processes. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. The solicitation incorporates various FAR and DFARS clauses, including the Buy American Act and the Berry Amendment. A price evaluation preference is available for SBA-certified HUBZone small businesses. All quotes must be submitted via the DIBBS system by the deadline of September 25, 2026.

General Info

DLA seeks 300 quick release pins by March 2027 for San Diego delivery.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332510 - Hardware Manufacturing

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, USA

Set-Aside

NONE

Documents

SPE4A6-26-T-33BS Request for Quotations

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedSep 17

Solicitation

Response DeadlineSep 25

Deadline has passed

Submission Closed

09/25/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Office AddressUSA

Contacts

Shaundrea Granderson

contact@example.gov

+1 (555) 000-0000

Full Description

PIN,QUICK RELEASE
PIN,QUICK RELEASE
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2 IAW BASIC NON GOVT STD NASM17984 REVISION NR 3 DTD 01/30/2026 PART PIECE NUMBER: P/N MS17984C428
TDP Rev B Gen 2 IAW REFERENCE NON GOVT STD NAS1332 REVISION NR 9 DTD 10/31/2012 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
SPE4A6-26-T-33BS
SECTION B
PR: 7018389172 PRLI: 0001 CONT’D
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018389172 0001 EA 300.000
NSN/MATERIAL:5315010724800
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
Need Ship Date:03/16/2027 Original Required Delivery Date:06/18/2027
SPE4A6-26-T-33BS NSN/Part Number: 5315-01-072-4800 Quantity: 300 EA Purchase Request: 7018389172QTY: 300 Delivery: 171 days ADO