Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN-RIVET

Active
SPE4A6-26-T-22KCFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of three threaded pin-rivets under part number 5320-01-503-9162. The contract requires delivery within 122 days after receipt of order and specifies performance at Tinker AFB. The procurement is governed by NAICS code 332510 and includes a response deadline of September 2, 2026. The supplier must adhere to strict technical and quality standards, including DLA packaging requirements, physical identification and bare item marking per MIL-STD-130N, and SAE AS9100 higher-level quality requirements. Inspection and acceptance will occur at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331. Additionally, the contract mandates the removal of government identification from any non-accepted supplies and requires specific documentation for source approval requests.

General Info

DoD procurement of three threaded pin-rivets for Tinker AFB by September 2, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-22KC Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Ahoefa Simons De Fanti
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN-RIVET
PIN-RIVET, THREADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ039: Non-Tailored Higher-Level Quality Requirements (SAE AS9100) for Manufacturers and Non-Manufacturers
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY NO DATA IS AVAILABLE FOR USE IN NSN/Part Number: 5320-01-503-9162 Quantity: 3 EA Purchase Request: 7017408667QTY: 3 Delivery: 122 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
RIVET, SOLID
Solicitation # SPE4A7-26-T-658P
Solicitation SPE4A7-26-T-658P is a Request for Quotations issued by DLA Aviation for the procurement of 159 pounds of solid rivets under NSN 5320001175853. The items are classified as critical application hardware and must be manufactured in accordance with TDP Rev D Gen 4, specifically referencing drawing 13873 EI-001175853 and non-government standard NASM5674 Revision 2. Delivery is required within 171 days, with a need ship date of February 12, 2027, and an original required delivery date of May 18, 2027. The terms are FOB Origin, with both inspection and acceptance occurring at the origin. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging, MIL-STD-129 for marking, and RP001 for palletization. Quality assurance must adhere to SAE AS9003 or ISO 9001, with sampling conducted per MIL-STD-1916 or ASQ H1331, emphasizing a zero-nonconformance acceptance policy. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and payment. Additionally, the solicitation incorporates various FAR and DFARS clauses regarding cybersecurity, domestic sourcing under the Buy American Act and Berry Amendment, and specific preferences for certified HUBZone small businesses.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-22RB
This contract, solicitation number SPE4A6-26-T-22RB, is for the procurement of six blind rivets under NSN 5320-01-290-9684 for the Department of Defense ASC Commodities Division. The delivery requirement is set for 112 days after receipt of order, with the place of performance located at Hill AFB. The procurement is subject to specific DLA packaging, marking, and documentation requirements, including source approval requests and configuration change management. Quality assurance must adhere to MIL-STD-1916 or ASQ H1331 sampling plans, with specific AQLs assigned for critical, major, and minor attributes. While item unique identification is not required, the contract contains strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification and completed export-control training.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, DOOR, VEHICULAR
Solicitation # SPE7L3-26-U-0719
This contract, identified as SPE7L3-26-U-0719, is a solicitation for the procurement of 13 vehicular door handles, specifically part number A18-68371-000 from Daimler Truck North America LLC, under NSN 2540015778736. The requirement is issued by the Department of Defense Land Supplier Operations Vehicle Support and is designated as a total small business set-aside. Delivery is required within 80 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, physical identification, and the removal of government identification from non-accepted supplies. Packaging must comply with MIL-STD-129 and RP001, with hazardous materials requiring IP025 compliance or non-hazardous items following ASTM D3951. The contract specifies a zero percent quantity variance and utilizes DLA direct coverage within the continental United States.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 8 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-17KC
Solicitation SPE4A6-26-T-17KC is a fixed-price request for quotations issued by the Defense Logistics Agency Aviation, ASC Commodities Division, for the procurement of 156 turnlock fastener studs under National Stock Number 5325-00-728-8500. The contract is managed under the First Destination Transportation program with delivery required within 84 days after receipt of the order, shipping FOB Origin to DLA Distribution Cherry Point, North Carolina. The procurement is categorized under NAICS code 332510 and requires the manufacturer's inspection system to comply with SAE AS9003 or ISO 9001. The contract mandates strict adherence to DLA Master List technical and quality requirements, including specific sampling plans based on MIL-STD-1916 or ASQ H1331. Packaging must follow ASTM D3951 and MIL-STD-129, with specific requirements for bare item marking and hazardous material labeling. Security and compliance obligations include CMMC Level 2 certification, NIST SP 800-171 assessment requirements, and strict export controls under ITAR and EAR. Payment and invoicing must be processed electronically through the Wide Area WorkFlow system. Offerors are encouraged to provide quantity ranges due to demand volatility and must comply with the Buy American Act and Berry Amendment.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVED
Solicitation # SPE4A7-26-T-662M
Solicitation SPE4A7-26-T-662M is a Request for Quotations issued by the Defense Logistics Agency for the procurement of grooved clamp couplings, identified by NSN 5342010487743. The requirement consists of multiple line items totaling 93 units, with specific quantities distributed across four CLINs, including 69 units for CLIN 0004. Deliveries are scheduled for various DLA distribution centers in Utah, California, Georgia, and Pennsylvania, with a need ship date of February 12, 2027, and an original required delivery date of May 9, 2027. The delivery timeframe is specified as 171 days after order. The contract is established as a commercial item procurement with FOB Origin terms for both inspection and acceptance. Technical and quality compliance is governed by the DLA Master List, with manufacturers required to maintain inspection systems meeting SAE AS9003 or ISO 9001 standards. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, while palletization follows RP001 requirements. Notably, the contract strictly prohibits the use of mercury or mercury compounds in preservation, packaging, and marking. Administrative requirements include electronic invoicing via the Wide Area Workflow system and compliance with the Buy American Act and Berry Amendment.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-18XF
This contract is for the procurement of 5,642 blind rivets, identified by NSN 5320-01-135-6799 and part numbers NAS9302BNS-5-07 and NAS1686. The items are classified as commercial critical application items and must be manufactured according to the current revisions of the applicable non-government standards. The unit of issue is each, with a purchase unit quantity of 50 per package. Delivery is required within 99 days, with a final required delivery date of April 8, 2027. The shipment is FOB Origin, and both inspection and acceptance will occur at the origin. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-17QV
Solicitation SPE4A6-26-T-17QV is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 14 turnlock fastener studs, identified by NSN 5325-00-281-9117. The fasteners are specified as steel with a cadmium plated finish. The required delivery date is March 16, 2027, with a need ship date of February 12, 2027, for delivery to the DLA Distribution Depot Oklahoma at Tinker AFB. Inspection and acceptance will occur at the destination. The contractor must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129 for marking and labeling, with the DLA Master List of Technical and Quality Requirements taking precedence. Compliance with the Buy American Act, the Berry Amendment, and the prohibition of hexavalent chromium is required. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and reporting. The solicitation falls under NAICS code 332510, and quotations were due by August 24, 2026.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
INSERT, SCREW THREAD
Solicitation # SPE4A6-26-T-22SH
This solicitation, number SPE4A6-26-T-22SH, is issued by the Department of Defense ASC Commodities Division for the procurement of 52 screw thread inserts under NSN 5325-00-815-4930. The delivery requirement is 237 days after order, with a response deadline of September 3, 2026. Offerors are encouraged to provide quantity ranges to accommodate potential changes in demand and must certify that they will not provide covered telecommunications equipment or services. Compliance with domestic material restrictions, including the Berry Amendment and Buy American Act, is mandatory, and any non-domestic materials must be disclosed. Additionally, all contractors must register via the Account Management and Provisioning System to maintain access to the Vendor Shipment Module. Additive manufacturing is prohibited unless specifically authorized, and small business joint ventures must provide specific representations regarding their business status.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-T-670D
This contract is for the procurement of 293 machine thread plugs, identified by NSN 5365013057067. The order is designated as a critical application item and must adhere to specific technical and quality requirements set forth in the DLA Master List. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. The material does not have a shelf life requirement. Delivery is required within 170 days, with a need ship date of February 12, 2027, and an original required delivery date of June 7, 2027. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and RP001 DLA packaging requirements. The contract allows for zero quantity variance.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
RECEPTACLE, TURNLOCK FA
Solicitation # SPE4A6-26-T-17QJ
Solicitation SPE4A6-26-T-17QJ is a request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 81 units of turnlock fastener receptacles, identified by NSN 5325001714365. The items are classified as commercial and critical application items, with specific references to Howmet Global Fastening Systems and Howmet Fixations Simmonds SAS. Delivery is required by February 27, 2027, with a requested ship date of February 12, 2027, to DLA Distribution Warner Robins in Georgia. The contract specifies destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. The procurement incorporates a wide range of federal and defense regulations, including the Buy American Act, the Berry Amendment, and DFARS requirements for safeguarding covered defense information. Strict prohibitions are placed on the intentional addition of mercury or mercury-containing compounds in the hardware, preservation, and packaging. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, respectively. Invoicing and payment are to be processed electronically through the Wide Area WorkFlow system. Technical and quality requirements are governed by the DLA Master List, and the contractor must adhere to specific configuration change management and bare item marking standards.
ASC COMMODITIES DIVISION

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7LX-26-U-9415
This solicitation, issued by DLA Land and Maritime under number SPE7LX-26-U-9415, is a Request for Quotations for an Indefinite Delivery Contract to acquire Access Covers (NSN 5340-01-245-2424). The contract is a Total Small Business Set-Aside with a maximum value of $350,000 and an estimated annual quantity of 72 units. The procurement is intended for a one-year period, featuring a guaranteed minimum of 10 units and a minimum delivery order quantity of 18 units. Deliveries are required within 58 days of an order, with terms set as FOB Origin for shipments within the continental United States. Technical and regulatory compliance is a critical component of this requirement. Manufacturers must maintain an inspection system that meets ISO 9001:2015 or an equivalent standard, and the use of additive manufacturing is prohibited unless specifically authorized. The contract incorporates strict cybersecurity mandates, including CMMC Level 2 requirements and the safeguarding of covered defense information. Additionally, the procurement is subject to export controls (ITAR/EAR), domestic material restrictions such as the Buy American Act and Berry Amendment, and a prohibition on the use of Class I ozone-depleting chemicals. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, respectively. Quotations must be submitted by August 25, 2026, and must not include used or reconditioned items to remain eligible for automated award.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332510
New
DIBBS
RING, RETAINING
Solicitation # SPE4A5-26-T-369J
This contract is for the procurement of 282 retaining rings, identified as NSN 5325011083432 and Honeywell International Inc. part number 3500974-1. The item is classified as a commercial critical application item. Delivery is required within 170 days, with a need ship date of February 12, 2027, and a final required delivery date of February 15, 2028. The shipment is to be delivered FOB Origin to DLA Distribution Cherry Point in North Carolina. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Quality assurance will be managed through zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except where functionally required and specified by NAVSEA.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 332722
New
DIBBS
RING, RETAINING
Solicitation # SPE4A6-26-T-22RT
This contract is a solicitation for the procurement of 100 retaining rings under NSN 5325-00-944-8277. The requirement specifies several approved part numbers from Smalley Steel Ring Co, Spirolox Inc, and Hamilton Sundstrand Corporation. The delivery is required within 5 days after receipt of order, with FOB origin for both inspection and acceptance. The agreement mandates strict adherence to DLA packaging and marking standards, including MIL-STD-130N for identification and MIL-STD-129 for marking. Logistics involve G&B Packing Company as the freight forwarder, with the final destination being the Government of Israel Ministry of Defense. Technical and quality requirements are governed by the DLA Master List, and the contract includes specific provisions for the removal of government identification from non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, SLOTTED, H
Solicitation # SPE4A6-26-T-22UY
This contract is for the procurement of 25 plain slotted hexagon nuts, identified by part number MS9364-16 and NSN 5310009436609. The items must adhere to SAE AS9364 standards with a thread class of 3B and are designated as critical application items. The hardware must be manufactured according to the current revision of the part standard, though previously manufactured stock meeting the then-current revision is acceptable. The agreement specifies a delivery timeframe of five days with FOB origin for both inspection and acceptance. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Quality assurance is governed by specific DLA master list requirements, including tailored higher level quality requirements and zero-based sampling plans per MIL-STD-1916 or ASQ H1331. The final shipment is destined for the UH-60M Main Warehouse in Australia via a designated freight forwarder.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-26-T-17LV
Solicitation SPE4A6-26-T-17LV is a fixed-price request for quotations issued by the DLA Aviation, ASC Commodities Division, for the procurement of 267 self-locking hexagon nuts under NSN 5310-00-982-5064. The items are to be delivered to DLA Distribution Jacksonville with a required delivery date of March 28, 2027, and a delivery period of 171 days. The procurement is fully competitive and requires hardware to be manufactured according to the current revision of the applicable part standard. The contract mandates strict quality and technical compliance, incorporating the DLA Master List of Technical and Quality Requirements and requiring manufacturer inspection systems to comply with SAE AS9003 or ISO 9001. Inspection and acceptance are designated at the destination per FAR 52.246-2, though some provisions reference origin acceptance. Sampling must adhere to MIL-STD-1916 or ASQ H1331, and identification marking must follow MIL-STD-130N. Packaging must comply with MIL-STD-2073-1E and RP001, with a strict prohibition on the use of mercury or mercury-containing compounds. Offerors must comply with the Buy American Act and Berry Amendment, providing disclosure for any non-domestic materials. The government will not evaluate offers utilizing additive manufacturing. Payment and receiving reports must be processed electronically via Wide Area WorkFlow. A price evaluation preference is available for certified HUBZone small businesses. Quotations were due by August 24, 2026, to the point of contact, Erin Edwards.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-17YR
Solicitation SPE4A6-26-T-17YR is a request for quotations issued by DLA Aviation, ASC Commodities Division, for the procurement of 4,428 shear bolts, specifically part number NAS6604-5 under NSN 5306011308993. The items must be manufactured in accordance with the current revisions of NAS6603 through NAS6620 and NAS4002. Quality assurance requires that all Class 3A and 3B threads be inspected for dimensional conformance per System 22 of FED-STD-H28/20, with sampling conducted according to MIL-STD-1916 or ASQ H1331. The manufacturer's inspection system must comply with SAE AS9003 or ISO 9001 tailored to SAE AS9003. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of February 23, 2027. Shipping is FOB Origin, with the destination for inspection and acceptance being the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N, while palletization must follow RP001. The contract incorporates various FAR and DFARS clauses, including restrictions on the use of additive manufacturing and a price evaluation preference for certified HUBZone small businesses. Payment and receiving reports are to be processed electronically via the Wide Area WorkFlow system.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AI
Solicitation # SPE4A6-26-T-16SB
Solicitation SPE4A6-26-T-16SB is a Firm Fixed Price request for quotations issued by the Defense Logistics Agency's ASC Commodities Division for the procurement of three structural aluminum plates (NSN 1560-01-723-7586). The delivery is required within 198 days of the solicitation date, with the place of performance and delivery designated as the DDSP New Cumberland facility in Pennsylvania. The contract is governed by the DLA Master Solicitation Revision 05 and requires adherence to specific technical and quality standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking and barcoding. The procurement is subject to strict export controls under ITAR and EAR, requiring contractors to have approved US/Canada Joint Certification Program certification and specific DLA authorization to access technical data. Compliance requirements include CMMC Level 2 cybersecurity standards, NIST SP 800-171, and electronic invoicing via the Wide Area Workflow system. Inspection and acceptance will occur at the destination, with quality assurance based on MIL-STD-1916 and ASME Y14.5M standards. Quotations must be submitted electronically through the DLA Internet Bid Board System by August 21, 2026.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 334519
New
DIBBS
GAGE, DIFFERENTIAL, DIAL
Solicitation # SPE4A6-26-T-17YY
Solicitation SPE4A6-26-T-17YY is a total small business set-aside request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of nine dial indicating differential pressure gages, identified by NSN 6685-01-073-8428. The requirement specifies a delivery timeframe of 171 days after order, with an original required delivery date of January 14, 2027, and a need ship date of February 12, 2027. Delivery is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements (RP001) and MIL-STD-2073-1E, with marking governed by MIL-STD-129. Quality assurance will be conducted using MIL-STD-1916 or ASQ H1331 zero-based sampling plans. Key material restrictions include a prohibition on the intentional addition of mercury or mercury-containing compounds, except where functionally required and shock-proofed per NAVSEA 5100-003D. Administrative requirements include the use of the Wide Area WorkFlow (WAWF) system for electronic invoicing and payment. The solicitation is governed by NAICS code 334519 and incorporates various FAR and DFARS clauses, including cybersecurity reporting under DFARS 252.204-7012 and Buy American Act compliance.
Other Measuring and Controlling Device Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
WASHER, SPRING TENSION
Solicitation # SPE4A6-26-T-17MB
Solicitation SPE4A6-26-T-17MB is a Request for Quotations issued by DLA Aviation, ASC Commodities Division, for the procurement of 11 units of spring tension washers, identified by NSN 5310-01-445-1502. The delivery is set for 171 days after award, with a required delivery date of December 11, 2026, and a need ship date of February 12, 2027. Shipping is FOB Destination to DLA Distribution San Joaquin in Tracy, California. The procurement is not a small business set-aside and falls under NAICS code 332722. Notably, there is no approved technical data package available for this item as the data is either proprietary or insufficient for competitive procurement. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Preservation must follow ASTM D3951, and the use of mercury or mercury compounds in preservation, packaging, and marking is strictly prohibited. Inspection and acceptance will occur at the destination, with sampling conducted according to MIL-STD-1916 or ASQ H1331, targeting zero non-conformances. Administrative requirements include the use of the Wide Area WorkFlow system for electronic invoicing and adherence to DFARS 252.204-7012 for safeguarding covered defense information. All quotes must be submitted through the DLA Internet Bid Board System.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
RIVET, BLIND
Solicitation # SPE4A6-26-T-17XV
Solicitation SPE4A6-26-T-17XV is a fixed-price request for quotations issued by the DLA Aviation ASC Commodities Division for the procurement of 103 blind rivets, identified by NSN 5320010422897. The items are critical application components that must be manufactured according to the current revisions of part standards NAS9310 and NAS1687. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of March 19, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution Cherry Point in North Carolina, where both inspection and acceptance will take place. The contract mandates strict quality and packaging standards, requiring compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance must meet SAE AS9003 or ISO 9001 standards, with sampling conducted per MIL-STD-1916 or ASQ H1331, emphasizing a zero-nonconformance policy for sample lots. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to the Buy American Act and Berry Amendment regarding domestic sourcing. The solicitation is open to small businesses, with a specific price evaluation preference for certified HUBZone concerns.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-16UR
Solicitation SPE4A6-26-T-16UR is a request for quotations issued by the DLA Aviation, ASC Commodities Division, for the procurement of 1,100 flat washers under NSN 5310-00-235-3544. The contract requires delivery to DLA Distribution San Diego, California, with a delivery timeframe of 107 days after receipt of order and shipping terms set as FOB Destination. The procurement is managed through the DLA Internet Bid Board System (DIBBS) and utilizes Wide Area WorkFlow (WAWF) for electronic invoicing. The contractor must adhere to strict quality and technical standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, with a requirement for zero non-conformances in sample lots. Key compliance mandates include the prohibition of intentionally added mercury, adherence to export control regulations (ITAR/EAR) via JCP certification, and the removal of government identification from non-accepted supplies. Inspection and acceptance are conducted by the government at the point of origin.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-26-T-22QV
This contract is for the procurement of 255 self-locking plate nuts, identified as NSN 5310015971830 and part number M45913/1-010CS3. The items are classified as critical application commercial hardware and must be manufactured according to the current revision of MIL-DTL-45913/1B(3) and MIL-DTL-45913E. Delivery is required within 249 days, with a required delivery date of September 10, 2026, shipped FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. Quality assurance and sampling must adhere to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance acceptance policy for sample lots. Identification marking must comply with MIL-STD-130N and MIL-STD-129, while packaging and palletization must follow MIL-STD-2073-1E and DLA requirement RP001. The contract specifies a zero percent quantity variance and mandates that inspection and acceptance occur at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 8 hours ago

DEADLINE

in 8 days
View Details