Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN-RIVET

Active
SPE4A6-26-T-07KCFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract pertains to the procurement of a pin-rivet item identified by NSN 5320-01-521-9686 and part number WC1245C-6L14, with equivalent specifications under Boeing’s 3M1245C3L14A drawing. The item is source-controlled, meaning only approved vendors—such as Alcoa Global Fasteners and West Coast Aerospace—may supply it unless unapproved offerors obtain formal source approval from the OEM and submit the necessary technical data or certification with their proposal. The item is designated as a critical application component, requiring strict adherence to limited rights technical data that is not provided by the government and must be accessible to the supplier. Manufacturing and testing must comply with proprietary specifications referenced in the DLA Master List of Technical and Quality Requirements, which supersede all other standards. The contract mandates zero-defect acceptance under a zero-based sampling plan, aligning with MIL-STD-1916 or ASQ H1331, with no tolerance for non-conformances unless explicitly overridden. Packaging must conform to ASTM D3951 and MIL-STD-129 for labeling and marking, with palletization following DLA’s RP001 requirements. The item is subject to a fixed quantity of 58 units, with no variance allowed, delivered FOB origin by January 10, 2027, under a 169-day delivery schedule. Inspection and acceptance occur at the point of origin, and all packaging must be clearly marked per the purchase order. Delivery must be sent to DLA Distribution San Diego at the specified address, with shipping and transportation governed by DLAD procedural notes. The solicitation, issued under contract number SPE4A6-26-T-07KC, closed for responses on July 24, 2026, and the procurement falls under NAICS code 332510 for fastener manufacturing.

General Info

Procure 58 critical pin-rivets per Boeing spec, zero-defect, FOB origin, delivered to DLA San Diego by Jan 10, 2027.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07KC Request for Quotations DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Ericka Mosley
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN-RIVET
PIN-RIVET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
THIS IS A SOURCE CONTROLLED ITEM WHICH MUST BE
MANUFACTURED AND TESTED IN ACCORDANCE WITH THE
CITED LIMITED RIGHTS DATA. THE GOVERNMENT CAN
NOT PROVIDE THE DATA. ONLY THOSE VENDORS WHO
HAVE ACCESS TO THE DATA OR CAN PROVIDE TRACE
ABILITY TO THE APPROVED SOURCES SHOULD QUOTE.
SAR PACKAGE IS REQUIRED IF YOUR COMPANY IS
CONSIDERING SOURCE APPROVAL.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
ALCOA GLOBAL FASTENERS (06950) P/N WC1245C-6L14 WEST COAST AEROSPACE
(60516)EL3401NF6-14A IDENTIFY TO:
THE APPROVED SOURCE(S) MUST MEET THE REQUIREMENTS OF
THE CURRENT REVISION OF THE SOURCE CONTROL DRAWING
OFFERORS NOT CITED AS APPROVED SOURCES IN THE
PURCHASE ORDER TEXT ARE REQUIRED TO
OBTAIN SOURCE APPROVAL FROM THE OEM. A COPY OF
THE SOURCE APPROVAL REQUEST, TECHNICAL DATA
PACKAGE OR CERTIFICATION OF PRIOR APPROVAL MUST
ALSO BE SUBMITTED TO DLA WITH THE OFFER.
DATA IS PROPRIETARY OR INSUFFICIENT FOR
COMPETITIVE PROCUREMENT
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
SPE4A6-26-T-07KC
SECTION B
THE BOEING COMPANY 76301 P/N 3M1245C3L14A
TDP Rev A Gen 1 IAW BASIC DRAWING NR 76301 3M1245 REVISION NR N DTD 05/16/2012 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017486797 0001 EA 58.000
NSN/MATERIAL:5320015219686
DELIVERY (IN DAYS):0169
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
SPE4A6-26-T-07KC
SECTION B
PR: 7017486797 PRLI: 0001 CONT’D
US
Need Ship Date:01/10/2027 Original Required Delivery Date:12/11/2026
SPE4A6-26-T-07KC NSN/Part Number: 5320-01-521-9686 Quantity: 58 EA Purchase Request: 7017486797QTY: 58 Delivery: 169 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
HANDLE, BOWThe contract pertains to the procurement of 13 HANDLE, BOW units with NSN 5340-01-671-8345 under solicitation SPE7LX-26-T-0807, issued by the Department of Defense’s Strategic Acquisition Program Directorate. Delivery is required within 112 days of award, with responses due by July 27, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions determined by the solicitation issue date or award date depending on procurement size. The item is subject to strict prohibitions on Class I ozone-depleting chemicals, which override any conflicting specification requirements, and all substitute chemicals must be approved unless explicitly authorized. Technical data associated with this item is restricted under an Oshkosh Defense, LLC license agreement, mandating compliance with non-disclosure and data destruction protocols, and vendors must complete required forms accessed through the DLA TDMT portal. The item is classified as export-controlled technical data under either ITAR or EAR regulations, requiring prior authorization from the Department of State or Commerce for any disclosure to foreign persons, regardless of location. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DLA training and submitted the Export-Controlled Technical Data Questionnaire. The place of performance is specified as Barstow, California, 92311-5014, and inquiries should be directed to Kalyn Danneberger at the provided contact information. The NAICS code 332510 indicates classification under Manufacturing of Other Metal Valves and Pipe Fittings, and the procurement is conducted under federal acquisition rules with no set-aside designation.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract covers the procurement of 104 mounting brackets with NSN 5340-01-117-3024 under solicitation SPE7L1-26-T-841B, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 168 days after award, and responses must be submitted by July 27, 2026. The item is subject to multiple technical and quality requirements incorporated by reference from the DLA Master List of Technical and Quality Requirements, including packaging standards, removal of government identification from non-accepted supplies, and stringent export control protocols. Technical data associated with this item is classified under ITAR or EAR regulations, prohibiting any export or disclosure to foreign persons without explicit authorization from the Department of State or Commerce. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD export control training and obtained DLA approval. The place of performance is specified as New Cumberland, Pennsylvania, with a primary point of contact at DLA for procurement inquiries.
LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
HANDLE, MANUAL CONTRThis contract, issued under solicitation number SPE7L5-26-T-4213 by the Department of Defense through Land Supplier Ops Engines, requires the procurement of 12 units of a manual handle component identified by NSN 5340016994128, with a unit price of $12.00 and total value of $144.00. Delivery is mandated 216 days after the date of order, with a required delivery date of February 18, 2027, and must be shipped FOB origin to the designated receiving warehouse in Tracy, California. The contract mandates full compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including barcoding and specific container standards, with palletization governed by DLA’s RP001 packaging requirements. No ozone-depleting chemicals may be used in any part of the product or packaging, and substitute chemicals require prior approval unless explicitly authorized by specifications. All items are subject to inspection and acceptance at the destination point. The contractor must use Wide Area WorkFlow (WAWF) for all invoicing and receiving report submissions. The contract incorporates multiple Federal Acquisition Regulation (FAR) clauses, including those governing equal opportunity, trafficking in persons, employment eligibility verification, sustainable products, hazardous material identification, cybersecurity safeguarding under NIST SP 800-171, changes, default, and prohibited internal confidentiality agreements. It further requires compliance with DFARS provisions related to covered defense information, prohibition of specified telecommunications equipment, and hazardous material labeling. Offerors must hold a valid Unique Entity ID and CAGE code and submit all proposals electronically through the DLA Internet Bid Board System by the July 21, 2026 deadline; paper submissions are not accepted. Evaluation factors are not specified, and the contract is structured as a fixed-price delivery order with zero variance allowed in quantity. The contractor must also comply with all socioeconomic representations, including small business status and joint venture disclosures, and must ensure all labor practices align with federal non-discrimination and whistleblower protections. No special marking or preservation materials are required beyond those specified, and all transport must conform to DLA’s procedural notes on first destination transportation.
LAND SUPPLIER OPNS ENGINES

POSTED

about 22 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RINGThis contract specifies the procurement of a spacer, ring with NSN 5365-01-307-9609 and part number 7451FT-4780 manufactured by Greene Tweed & Co Inc, with a total quantity of 35 units to be delivered FOB origin within 114 days of the contract award. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers including tailored higher-level quality standards, inspection and acceptance at origin, and removal of government identification from non-accepted supplies. Documentation must adhere to DLA packaging requirements per RP001 and MIL-STD-2073-1E, with packaging coded as U and marking in accordance with MIL-STD-129 without special markings. Sampling shall follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and critical, major, and minor attributes are to be verified at levels VII, IV, and II respectively. Measuring and test equipment must meet RT001 standards, and the unit of issue is each (EA) with no quantity variance permitted. Delivery is to DLA Distribution Depot Hill in Hill AFB, Utah, and transportation logistics comply with DLAD Proc Notes C19 and C20. The original required delivery date is March 9, 2027, with a need ship date of November 8, 2026, and the contract was issued under solicitation SPE4A7-26-T-561G with a response deadline of July 21, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 22 hours ago

DEADLINE

in 4 days
View Details
NAICS: 332510
New
DIBBS
YOKE BUSHINGThe contract pertains to the procurement of 29 yoke bushings, identified by NSN 5365-01-463-3947 and part number 650301-D35, for use in L3Harris Maritime Power & Energy systems. Delivery is required within 168 days of contract award, with shipment FOB origin and final inspection and acceptance occurring at the destination—DLA Distribution’s New Cumberland, Pennsylvania facility. The items must comply with MIL-STD-2073-1E packaging standards and MIL-STD-129 marking requirements, with no special marking codes required. Preservation methods must adhere to MIL-PRF-23199E, and barcoding must follow ISO/IEC 16388. The contract prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for functional uses in batteries, fluorescent lamps, instruments, sensors, weapon systems, or chemically specified reagents, with portable mercury-containing devices required to have shock-proof construction and a secondary containment boundary per NAVSEA 5100-003D. Sampling for quality assurance must follow MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required unless otherwise specified. All technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. The unit of issue is each (EA), with no variance allowed in quantity.
NUCLEAR REACTOR PROGRAM

POSTED

about 22 hours ago

DEADLINE

in 4 days
View Details