Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN SET, SPRING

Active
SPE4A6-26-T-24PQFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-24PQ, is for the procurement of one spring pin set identified by NSN 5315-01-628-0898. The contract requires delivery within 20 days after the order is placed and falls under NAICS code 332618. Performance is to be carried out at APO 96319-5014. The agreement incorporates specific technical and quality standards as defined in the DLA Master List, including packaging requirements under RP001 and the removal of government identification from non-accepted supplies per RQ011. Responses to this solicitation are due by September 8, 2026, and inquiries should be directed to the primary point of contact, Summer Allen.

General Info

DoD procurement of one spring pin set, delivery within 20 days, due 9/8/26.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

UNIT 5014, APO, AP, 96319-5014, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-24PQ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
SUMMER ALLEN
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN SET,SPRING
PIN SET,SPRING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR NSN/Part Number: 5315-01-628-0898 Quantity: 1 EA Purchase Request: 7018037927QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-24RN
This contract is for the procurement of four quick release pins under solicitation number SPE4A6-26-T-24RN for the Department of Defense. The items are identified by NSN 5315-01-676-7110 and are associated with part numbers from Grove U.S. LLC and McMaster-Carr Supply Co. Delivery is required within 20 days, with the shipment destined for the Aberdeen Test Center in Maryland. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards such as MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods consistent with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Shipping must be handled via the fastest traceable means, explicitly prohibiting the use of parcel post.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-04Z2
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 99 O-rings under NSN 5331-01-183-4060. The contract requires delivery within 19 days after the order is placed. All supplied items must be completely free of asbestos, and any alternative materials must be approved according to specific regulatory clauses. The contractor must adhere to several technical and quality requirements, including DLA packaging standards and the removal of government identification from non-accepted supplies. Additionally, the provider is required to maintain supply chain traceability documentation and provide necessary paperwork for source approval requests. The solicitation is open for responses until September 10, 2026.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE7M2-26-T-6604
This contract, identified as SPE7M2-26-T-6604, is a solicitation from the Department of Defense Nuclear Reactor Program for the procurement of two straight Headle pins under NSN 5315-01-619-4737. The agreement specifies a delivery timeframe of 154 days, with a required delivery date of May 8, 2027, and a need ship date of February 12, 2027. Delivery is set as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It explicitly prohibits the use of Class I ozone-depleting chemicals in the production of the items. Technical and quality requirements are governed by the DLA Master List, and the items are designated as critical application components with approved sources including Siemens Government Technologies and Curtiss-Wright Electro-Mechanical Corp.
NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A0-26-T-4540
This contract is for the procurement of one quick release pin, identified by NSN 5315124122916 and Oshkosh Defense LLC part number 4470336. The order is managed under solicitation SPE4A0-26-T-4540 by the Department of Defense Aviation Supply Chain. Delivery is required within five days of order, with the item being shipped FOB Origin to a maintenance unit at Fort Sill, Oklahoma. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking guidelines per MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. The contract specifies a zero percent quantity variance and requires shipment via the fastest traceable means, explicitly prohibiting the use of parcel post.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332618
New
DIBBS
PIN, RETAINING
Solicitation # SPE4A6-26-T-24WA
This contract is for the procurement of one retaining pin, identified by NSN 5315-01-455-2626 and part number HM-46 from Rentfrow, Incorporated. The order is issued by the Department of Defense ASC Commodities Division under solicitation SPE4A6-26-T-24WA, with a required delivery date of August 21, 2026, and a delivery timeframe of five days. The item is designated as a critical application item and must be shipped FOB Origin to the Naval Air Support Equipment Facility in San Diego, California, using the fastest traceable means. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for source approval, packaging, and item marking. Quality assurance must follow MIL-STD-1916 or ASQ H1331 sampling plans, with zero non-conformances required for acceptance. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow the RP001 requirements. Inspection and acceptance will take place at the destination.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-397K
This solicitation from the Department of Defense, specifically the ASC Supplier OEM Division, is for the procurement of 315 single leg wire rope assemblies under part number 4010-00-051-7122. The contract requires delivery within 156 days after the order is received, with the place of performance located at Hill AFB. Item Unique Identification is not required for this order per the service customer request. The contract is subject to strict technical and quality requirements as outlined in the DLA Master List, including specific packaging standards and source approval request documentation. Notably, the item contains technical data subject to ITAR or EAR export controls, meaning access is limited to approved contractors with US/Canada Joint Certification Program certification. Additionally, the provider must adhere to CMMC Level 2 certification standards and specific higher level quality requirements for manufacturers and non-manufacturers.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-04Z5
This solicitation, identified as SPE7L1-26-T-04Z5, is issued by the Department of Defense Land Supply Chain for the procurement of 20 O-rings under NSN 5331-00-772-3892. The contract requires a rapid delivery turnaround of 5 days after receipt of order. It is categorized under NAICS code 332618 and is managed by the Defense Logistics Agency. The agreement is subject to several critical technical and quality requirements, including specific DLA packaging standards, configuration change management, and the use of Qualified Products or Manufacturers Lists. Notably, the item involves technical data subject to strict export controls under ITAR and EAR regulations. Consequently, contractors must have approved US/Canada Joint Certification Program certification and complete required training to access and handle the associated technical data.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A5-26-T-398E
This contract is for the procurement of 13 units of 1.625 inch flash-butt welded stud link chain, identified by NSN 4010001495607. The items must be manufactured in accordance with MIL-DTL-24633B Revision B and require a contractor first article test. Delivery is set for 95 days after order, with FOB origin for both inspection and acceptance. The procurement is subject to strict quality and packaging standards, including DLA packaging requirements RP001 and marking per MIL-STD-129. Quality compliance is managed through specific CDRLs and sampling methods following MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds in the hardware. Item Unique Identification is not required for this request.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7M2-26-T-6585
This solicitation is for the procurement of 1,709 O-rings under solicitation number SPE7M2-26-T-6585 for the Nuclear Reactor Program. The delivery requirement is 59 days after receipt of order. Offerors must provide details regarding dealer or distributor certifications and adhere to strict domestic material restrictions, including the Buy American Act and the Berry Amendment. Additionally, bidders must certify that they will not provide covered telecommunications equipment or services. Offerors are encouraged to submit quantity ranges to accommodate potential changes in demand. Those unable to quote by the deadline should submit a No Bid response with an anticipated quote date to keep the requirement active. All contractors must prepare for upcoming changes to the Vendor Shipment Module, which will soon require registration via the Account Management and Provisioning System. Additive manufacturing is prohibited unless specifically authorized by the contracting officer.
NUCLEAR REACTOR PROGRAM

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-04Z8
This contract is a solicitation for the procurement of two O-rings under solicitation number SPE7L1-26-T-04Z8, issued by the Department of Defense Land Supply Chain. The items are identified by NSN 5331-00-180-9722 and part number 99-4771, with technical specifications adhering to reference drawing 14153 SNRR-0075. The delivery requirement is set for five days after receipt of order, with FOB, inspection, and acceptance all occurring at the point of origin. The agreement incorporates several DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and MIL-STD-129. Due to the potential for deterioration from ultraviolet rays, the items must be sealed in medium duty, waterproof, greaseproof, opaque bags per MIL-DTL-117. The contract also references specific quality and documentation standards such as RP001 for packaging and RC001 for source approval requests.
LAND SUPPLY CHAIN

POSTED

about 6 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A6-26-T-24YG
This contract is for the procurement of six straight headless pins, identified by NSN 5315015437372 and part number MS51400-246. The items must adhere to the NASM51400 Revision 2 standard and are subject to specific DLA technical and quality requirements, including physical identification and bare item marking. Inspection and acceptance will occur at the origin, with a delivery timeline of 155 days and a required delivery date of April 19, 2027. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following the DLA Packaging Requirements for Procurement. Sampling and quality assurance will be conducted according to MIL-STD-1916 or ASQ H1331, emphasizing zero non-conformances for acceptance. The shipment is destined for the DLA Distribution New Cumberland facility in Pennsylvania, and the material is noted to have no shelf life requirement.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASE
Solicitation # SPE4A6-26-T-24PJ
This solicitation from the Department of Defense ASC Commodities Division is for the procurement of one quick release pin, identified by NSN 5315-01-689-7433. The contract requires delivery within 10 days after receipt of order and mandates adherence to DLA packaging requirements and specific sampling methods according to MIL-STD-1916 or ASQ H1331. Technical and quality requirements are governed by the DLA Master List, and the contractor must comply with physical identification and marking standards. Crucially, this contract involves strict security and regulatory compliance, including CMMC Level 2 certification for third-party assessment and the protection of covered defense information. The technical data is subject to ITAR or EAR export controls, meaning it cannot be shared with foreign persons without prior authorization from the Department of State or Commerce. Access to this data is limited to approved contractors with US/Canada Joint Certification Program certification and completed DLA export-control training.
ASC COMMODITIES DIVISION

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 334419
New
DIBBS
SPACER, BALL
Solicitation # SPE4A6-26-T-24RC
This contract is a solicitation for the procurement of 313 ball spacers, identified as NSN 1440-00-961-5057 and Boeing part number 29-13703-3. The item is designated as a critical application item. Delivery is required within 81 days after order, with a need ship date of November 29, 2026, and an original required delivery date of December 4, 2027. The shipment is to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including ISO 9001:2015 standards for manufacturers. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Quality assurance and sampling must be conducted according to MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Inspection and acceptance will occur at the destination.
Other Electronic Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, HEXAGON H
Solicitation # SPE4A6-26-T-24WY
This contract is for the procurement of hexagon head cap screws under solicitation number SPE4A6-26-T-24WY for the Department of Defense. The requirement consists of two line items for NSN 5305016794991, with quantities of 327 and 144 units respectively. The items are identified as critical application items and are associated with part numbers from General Motors Corp and Oshkosh Defense LLC. Delivery is required within five days of order, with a required delivery date of July 16, 2026. Shipping is FOB Origin to the DLA LMP Zone 1 depot in Texarkana, Texas, using the fastest traceable means. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance is governed by zero-based sampling plans such as MIL-STD-1916 or ASQ H1331, and the contract specifies a zero percent quantity variance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24SY
This contract is for the procurement of machine screws, identified by NSN 5305-00-902-2127, with a total quantity of 419 packages, each containing 50 pieces. The items are classified as critical application commercial hardware and must be manufactured according to the current revisions of applicable part standards, including NASM24694 and NASM7839. The contract mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific gauging requirements for Class 3A and 3B threads and a prohibition on the intentional addition of mercury or mercury-containing compounds. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, requiring zero non-conformances for acceptance. Identification marking must comply with MIL-STD-130N, and a Certificate of Quality Compliance is required. Delivery is set for 162 days after order, with FOB, inspection, and acceptance all occurring at the point of origin. Packaging must follow ASTM D3951 and MIL-STD-129, with final shipment directed to DLA Distribution Cherry Point in North Carolina.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
THERMOCOUPLE, IMMERSION
Solicitation # SPE4A6-26-T-24TL
This contract is for the procurement of two immersion thermocouples, identified by NSN 6685-01-321-3326 and part number TC45000-1 from Semco Instruments, Inc. The order is managed by the ASC Commodities Division of the Department of Defense under solicitation SPE4A6-26-T-24TL. Delivery is required within five days, with FOB, inspection, and acceptance all occurring at the point of origin. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 for marking, while specifying that Item Unique Identification is not required. Quality assurance will be conducted via sampling methods according to MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Technical and quality standards are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, PLATE
Solicitation # SPE4A6-26-T-24QM
This contract is for the procurement of 1,128 self-locking plate nuts, identified by NSN 5310-01-272-2577. The item is classified as a commercial critical application item and must adhere to technical data package Revision A and reference drawing 81755 C9746 Revision E. Approved manufacturers include Monadnock Company and Howmet Global Fastening Systems Inc. The agreement specifies a delivery timeframe of 60 days with a required delivery date of April 2, 2027, shipping FOB Origin to DLA Distribution Depot Hill. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, and packaging must comply with ASTM D3951 and MIL-STD-129. The contract is issued by the Department of Defense ASC Commodities Division as a HUBZone set-aside under NAICS code 332722.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24UD
This contract is for the procurement of 397 machine screws under NSN 5305-01-651-3531. The items are designated as critical application items and must adhere to specific technical data packages and quality requirements, including MIL-STD-130N for identification marking and ASTM D3951 for packaging. Delivery is required within 144 days, with a final need date of January 31, 2027, shipping to the DLA Distribution New Cumberland facility in Pennsylvania. Quality assurance is managed through destination inspection and acceptance. The supplier must provide a Certificate of Quality Compliance with every shipment and follow strict sampling methods according to MIL-STD-1916 or ASQ H1331. The contract incorporates various DLA master list technical and quality requirements, including specific guidelines for packaging, the removal of government identification from non-accepted supplies, and the submission of required Contract Data Requirements Lists.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, SELF-AL
Solicitation # SPE4A6-26-T-24RV
This contract is for the procurement of 18 self-aligning roller bearings, identified as part number MS17133-15 and NSN 3110-00-165-5996. The item is classified as a commercial critical application item and must adhere to technical data package Revision B and basic specification MS17133B. Delivery is required within 158 days, with FOB, inspection, and acceptance all occurring at the origin. The agreement mandates strict compliance with DLA packaging and quality requirements, specifically citing MIL-STD-2073-1E, MIL-STD-129, and MIL-DTL-197M for preservation and marking. Additionally, the contract stipulates a mercury-free environment, prohibiting the intentional addition of mercury or mercury-containing compounds. Item Unique Identification is not required for this order.
Ball and Roller Bearing Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
SCREW, CAP, SOCKET HEAD
Solicitation # SPE4A6-26-T-24QA
This contract, identified as solicitation SPE4A6-26-T-24QA, is for the procurement of 67 socket head cap screws under NSN 5305-01-161-9117 for the Defense Logistics Agency. The delivery requirement is set for 168 days after receipt of order, with performance located in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards, bare item marking, and zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Additionally, the contract is subject to rigorous security and legal constraints, including CMMC Level 2 certification, Covered Defense Information protocols, and strict export controls under ITAR and EAR regulations. Access to technical data is limited to approved contractors with US/Canada Joint Certification Program certification.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332721
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-24VA
This solicitation by the ASC Commodities Division of the Department of Defense requires the delivery of 207 units of part number 0001S00000061 with a delivery timeline of 324 days after the order. A critical requirement of this contract is the First Article Testing process, which mandates that the contractor deliver two units to the Fleet Readiness Center East in Cherry Point, North Carolina, within 90 calendar days of the contract date. The government will then provide a written determination of approval or disapproval within 30 calendar days of receipt. Following First Article approval, the contractor must adhere to Production Lot Testing protocols to validate quality conformance. This includes providing 14 days' notice before presenting production lots for sample selection by the Quality Assurance Representative. The contractor is responsible for pricing the cost of samples consumed during testing and ensuring all shipments to the Cherry Point facility include specific documentation, such as DD Form 1222 and DD250/IRAPT reports. Fast Pay is not applicable to this solicitation.
Precision Turned Product Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-24PA
This contract is for the procurement of machine bolts under NSN 5306010845390, totaling 184 units across three separate line items. The delivery is required within 168 days after the order, with a required delivery date of February 22, 2027. Shipments are divided among three destinations: DLA Distribution Albany, DLA Distribution Barstow, and DLA Distribution New Cumberland. The items are designated as critical application items and must adhere to specific technical and quality requirements, including sampling methods per MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Delivery is FOB Origin, with inspection and acceptance occurring at the destination.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINE
Solicitation # SPE4A6-26-T-24TK
This contract is for the procurement of machine screws, specifically NSN 5305016903234, with parts provided by Howmet Global Fastening Systems Inc. The agreement consists of three line items with quantities of 14, 14, and 12 units respectively. Delivery is required within five days, with required delivery dates ranging from December 2025 to May 2026. The terms specify FOB Origin with inspection and acceptance occurring at the destination. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and certificates of conformance are authorized. All shipments must be sent via the fastest traceable means to the USA DEP Tobyhanna facility in Pennsylvania, explicitly prohibiting the use of parcel post.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-24YN
This contract is for the procurement of 200 flat washers under solicitation number SPE4A6-26-T-24YN for the Department of Defense ASC Commodities Division. The items are identified by NSN 5310-01-595-9361 and correspond to part numbers L311FF02 from Clarke Power Services and 3311A011 from Perkins Engines. Delivery is required within 20 days, with a required delivery date of September 3, 2026. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging and marking standards per MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331. Shipping is designated as FOB Origin, with the final destination being the Parque de Material Aeronautico de Lagoa Santa in Brazil, coordinated through the Brazilian Aeronautical Commission Warehouse in Maryland.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 6 hours ago

DEADLINE

in 9 days
View Details