Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

PIN, SHOULDER, HEADLE

Active
SPE4A6-26-T-06YMFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract issued by the Defense Logistics Agency under solicitation number SPE4A6-26-T-06YM seeks the procurement of 10 units of PIN, SHOULDER, HEADLESS components identified by NSN 5315014686381 and part number 1566224-1, with a total contract value of $10.00. Delivery is required within 85 days of order receipt, fob origin, to the designated receiving warehouse in Tracy, California. The contract mandates full compliance with MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, including barcoding and special labeling requirements, with palletization governed by DLA’s RP001 packaging standards. Mercury and mercury-containing compounds are strictly prohibited in all phases of the product lifecycle—including preservation, packaging, and marking—except for functional uses in batteries, fluorescent lights, instruments, sensors, controls, weapon systems, and specified chemical reagents, all of which must be enclosed in shockproof containers with a secondary containment barrier as mandated by NAVSEA 5100-003D. The contractor must adhere to DLA’s Master List of Technical and Quality Requirements referenced via RA001, and all hazardous materials must be labeled per OSHA’s Hazard Communication Standard unless exempt under other federal statutes. Electronic invoicing via WAWF is mandatory, and payment instructions are tied to the resulting award document. The contract includes a full suite of FAR and DFARS clauses covering employment practices, trafficking in persons, cybersecurity protections, safeguarding covered defense information, subcontracting limitations, and prohibitions on covered telecommunications equipment and hexavalent chromium. Inspection and acceptance occur at the destination point, and offers must be submitted electronically via DIBBS by July 24, 2026. The acquisition is structured as a simplified fixed-price purchase with no quantity variance allowed, and award is anticipated to be based on lowest price technically acceptable given the absence of formal evaluation factors and the use of automated procurement mechanisms. The contractor must be registered in SAM, hold a valid UEI and CAGE code, and affirm compliance with all socioeconomic and cybersecurity representation requirements.

General Info

Procure 10 PIN SHOULDER HEADLESS units, $10, fob origin, compliance with MIL-STD and DLA standards, no mercury, electronic invoicing, SAM registered.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-06YM for DLA Aviation ASC Commodities Division

PDFrfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts

Full Description

Show more
PIN,SHOULDER,HEADLE
PIN,SHOULDER,HEADLESS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
JERED LLC (98523)
BRUNSWICK, GA
P/N 1566224-1
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
JERED LLC 98523 P/N 15662224-1
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7015248115 0001 EA 10.000
NSN/MATERIAL:5315014686381
DELIVERY (IN DAYS):0085
DELIVER FOB: ORIGIN
SPE4A6-26-T-06YM
SECTION B
PR: 7015248115 PRLI: 0001 CONT’D
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:10 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:07/09/2026 Original Required Delivery Date:07/09/2026
SPE4A6-26-T-06YM NSN/Part Number: 5315-01-468-6381 Quantity: 10 EA Purchase Request: 7015248115QTY: 10 Delivery: 85 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
SPACER, RINGThe contract is for a single SPACER, RING part with part number CC-1032-21 supplied by CORNELL-CARR CO., INC. CAGE 21204, under NSN 5365014258582. The item is classified as a critical application item and must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, incorporating specifications identified by R or I numbers. The supplier must ensure no intentional introduction of mercury or mercury-containing compounds into the part, except for specified functional applications such as batteries, fluorescent lights, sensors, or chemical reagents approved by NAVSEA, with additional containment and shockproofing requirements for portable devices. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise stated, and all attributes are assigned verification levels or AQLs as defined in the contract. Packaging must adhere to MIL-STD-2073-1E with specific methods for preservation, wrapping, and containment, and marking must comply with MIL-STD-129 without special markings. The item is to be delivered FOB destination within 20 days of contract award, with zero tolerance for quantity variance. Delivery must be made via traceable freight shipping to the designated military address, explicitly prohibiting parcel post. The required delivery date is June 29, 2026, with a solicitation response deadline of July 24, 2026, and the contract is issued under the U.S. Department of Defense for use by the ASC SUPPLIER OPER AE AND AF DIV.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 23 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
MOUNT, RESILIENT, UTILITThis contract involves the procurement of 18 resilient utility mounts identified by NSN 5340-01-177-8693 under solicitation SPE7L1-26-T-841G, with a delivery deadline of 161 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Sampling follows MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. MERCURY and mercury-containing compounds are strictly prohibited except in specified functional applications such as batteries, fluorescent lamps, sensors, or weapons systems, with portable devices requiring shock-proof design and a secondary containment barrier per NAVSEA 5100-003D. The item carries a TYPE I shelf-life code T with a non-extendable 84-month shelf life per MIL-STD-130N. CLASS I ozone-depleting chemicals are banned, and any substitutes require prior approval. Technical data associated with this item is subject to ITAR or EAR export controls, restricting access to contractors with approved JCP certification, completion of required DOD export training, and DLA approval. Full and open competition applies, and the performance location is New Cumberland, PA, with contact information provided for DLA procurement oversight.
LAND SUPPLY CHAIN

POSTED

about 23 hours ago

DEADLINE

in 10 days
View Details