This Solicitation opportunity from Department Of Defense was posted on April 28, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
PIN, STRAIGHT, HEADED
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
The contract specifies the procurement of two straight-headed pins with the NSN 5315-01-643-5313, governed by stringent technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951 for packaging. The item must conform to NASM20392 Rev 01 and be marked accordingly, with packaging and labeling strictly adhering to MIL-STD-129 and RP001 DLA Packaging Requirements. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and unspecified attributes are treated as major. The item may require casting or forging, and sourcing support must be requested through DLA’s designated channels. Unit of issue is each, with a fixed quantity of two units, no variance permitted, and delivery is FOB origin within five days to Anniston Army Depot in Alabama via the fastest traceable means, excluding parcel post. Inspection and acceptance occur at destination. Item Unique Identification is not required per service customer direction, and DFARS 252.211-7003(c)(1)(i) applies. The contract was issued under solicitation SPE4A6-26-T-37Q3 with a response deadline of May 6, 2026, and an original required delivery date of April 23, 2026. All packaging, marking, and shipping instructions must be followed precisely, with shipping and delivery addressed to the specified depot location using the provided identifiers and contact information.
General Info
Agency
NAICS
Place of Performance
7 FRANKFORD AVE, ANNISTON, AL, 36201-5021, USASet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
PIN<(>,<)> STRAIGHT<(>,<)> HEADED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil. Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
IAW BASIC NON GOVT STD NASM20392
REVISION NR 01 DTD 05/27/2011
PART PIECE NUMBER: MS20392-9P75
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-37Q3
SECTION B
PR: 7016489700 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016489700 0001 EA 2.000
NSN/MATERIAL:5315016435313
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
MARKFOR
W31G1Y
W0LX ANNISTON DEPOT PROP DIV
ANNISTON ARMY DEPOT BLDG 361
7 FRANKFORD AVE
ANNISTON AL 36201-5021
US
M/F: (TCN) W31G1Y611000GH
RDD: 117
PROJ: TP 1
SUPP ADD: W31G1Y SIG: A
SPE4A6-26-T-37Q3
SECTION B
PR: 7016489700 PRLI: 0001 CONT’D
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: ADV: 2L FC: VE
Need Ship Date:00/00/0000 Original Required Delivery Date:04/23/2026
SPE4A6-26-T-37Q3 NSN/Part Number: 5315-01-643-5313 Quantity: 2 EA Purchase Request: 7016489700QTY: 2 Delivery: 5 days ADO
More opportunities from Department Of Defense → ASC COMMODITIES DIVISION
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS