This Solicitation opportunity from Department Of Defense was posted on May 26, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
PIN, STRAIGHT, HEADED
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract covers the procurement of 147 units of a PIN, STRAIGHT, HEADED, identified under NSN 5315-01-273-0094. The item must be manufactured in accordance with the most current applicable MIL specs, MIL standards, and industry standards as of the contract's effective date, with specific instructions to prohibit Class 1 Ozone Depleting Substances and require the use of alternate processes and chemicals. The contract references various detailed drawings and quality requirements, including dimensioning and tolerancing per ASME Y14.5 and surface roughness per ASME B46.1, with a nickel plate finish meeting AMS-QQ-N-290 Class 2 standards. Sampling and inspection are to follow MIL-STD-1916 or equivalent quality assurance plans, with strict verification levels assigned to critical, major, and minor attributes. Packaging and delivery must adhere to ASTM D3951 and DLA packaging requirements, with pallets and labeling compliant with MIL-STD-129. Delivery is FOB origin with an inspection and acceptance point at origin, scheduled for completion within 108 days after contract award, with original required delivery no later than December 25, 2026. Special provisions note potential requirements for casting or forging and availability of tooling assistance from DLA. The contract is managed by the Defense Logistics Agency (DLA) with performance at Tinker AFB, and includes instructions for obtaining data rights certificates and adhering to the DLA Master List of Technical and Quality Requirements.
General Info
Agency
NAICS
Place of Performance
3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USSet-Aside
Timeline
Submission Closed
Organization & Contact Information
Full Description
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
RD002, COVERED DEFENSE INFORMATION APPLIES
PIN,STRAIGHT,HEADED
The following exceptions to dwg 458-52351-506 apply: For DEG 458-52351; Remarks: DashNo -506; See notes THE CONTRACTOR SHALL USE THE MOST CURRENT AMENDMENTS APPLICABLE TO EACH MIL SPEC, MIL STD, INDUSTRY SPEC OR INDUSTRY STD AS OF THE EFFECTIVE DATE OF THIS CONTRACT UNLESS OTHERWISE NOTED REFERENCE ALL DETAIL AND OR TIERED DRAWINGS, SPECIFICATIONS AND DOCUMENTS: THE REQUIRED USE OF A CLASS 1 ODS AS DEFINED IN CLAUSE H-305 AND OR L-513 IS PROHIBITED. THE CONTRACTOR MUST USE THE ALTERNATE PROCESSES AND OR CHEMICALS SPECIFIED IN THE APPLICABLE DRAWINGS, SPECIFICATIONS AND DOCUMENTS.
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5 IN LIEU OF ANSI Y14.5. 2. SURFACE ROUGHNESS PER ASME B46.1 IN LIEU OF ANSI B46.1. 3. DELETE REFRENCE TO D2-500. 4. FINISH F 1-823 DEFINED: Nickel plate to meet the requirements of AMS-QQ-N-290, Class 2 to a thickness of 0.002 inch minimum. RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil. RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS (MANUFACTURERS AND NON-MANUFACTURERS)
Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a
SPE4A6-26-T-71J0
SECTION B
Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil.
THE DRAWING(S) LISTED BELOW ARE AVAILABLE FROM DLA TROOP SUPPORT DURING THE OPEN SOLICITATION PERIOD UNDER THE TERMS OF THE DATA RIGHTS GUARD AGREEMENT. THE DRAWING(S) WILL BE PROVIDED BY THE CONTRACTING OFFICER UPON THEIR RECEIPT OF A SIGNED RIGHTS GUARD CERTIFICATE. CERTIFICATES ARE AVAILABLE UPON REQUEST FROM THE CONTRACTING OFFICER.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
PARTS LIST
CRITICAL APPLICATION ITEM
IAW BASIC DRAWING NR 82918 458-52351
REVISION NR B DTD 02/25/1991
PART PIECE NUMBER: 458-52351-506
IAW REFERENCE DRAWING NR 81205 BAC5424
REVISION NR U DTD 01/04/2001
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BMS7-28
REVISION NR G DTD 09/14/1987
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5617
REVISION NR U DTD 12/13/2007
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5617
REVISION NR U DTD 03/24/2006
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 82918 458-52351
REVISION NR D DTD 05/02/1985
PART PIECE NUMBER:
IAW REFERENCE DRAWING NR 81205 BAC5300
REVISION NR N DTD 12/05/2016
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE4A6-26-T-71J0
SECTION B
PR: 7016049006 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016049006 0001 EA 147.000
NSN/MATERIAL:5315012730094
DELIVERY (IN DAYS):0108
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:09/20/2026 Original Required Delivery Date:12/25/2026
SPE4A6-26-T-71J0 NSN/Part Number: 5315-01-273-0094 Quantity: 147 EA Purchase Request: 7016049006QTY: 147 Delivery: 108 days ADO