Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN, STRAIGHT, HEADED

Active
SPE4A6-26-T-08DWFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 28 straight headed pins with NSN 5315-01-483-4502 under solicitation SPE4A6-26-T-08DW, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days after award, with the solicitation closing on July 29, 2026, and posted on July 21, 2026. The item falls under NAICS code 332510 and is subject to a range of stringent technical, quality, and compliance requirements incorporated from the DLA Master List of Technical and Quality Requirements, including specific provisions for packaging, inspection at origin, removal of government identification from non-accepted supplies, and physical marking of bare items. Cybersecurity compliance is mandatory with CMMC Level 2 certification for third-party assessors, and the contract also enforces DFARS 252.225-7048 due to the presence of export-controlled technical data governed by ITAR or EAR, restricting dissemination to only approved contractors with JCP certification, completed DOD training, and authorized access. All contractors must comply with covered defense information protocols and tailored higher-level quality requirements applicable to both manufacturers and non-manufacturers. The place of performance is specified as New Cumberland, Pennsylvania, with Shaundrea Granderson serving as the primary point of contact.

General Info

Procurement of 28 pins under DLA solicitation with strict quality, cybersecurity, and export control requirements.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Shaundrea Granderson
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,STRAIGHT,HEADED
PIN,STRAIGHT,HEADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RD002, COVERED DEFENSE INFORMATION APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5315-01-483-4502 Quantity: 28 EA Purchase Request: 7017571480QTY: 28 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PLATE, MOUNTINGThe contract pertains to the procurement of a single mounting plate, identified by NSN 5340-01-508-3732 and part number 7139998, under solicitation SPE7L1-26-T-857W. The item is to be delivered in one unit within 20 days of contract award, with delivery terms set at FOB origin and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E and MIL-STD-129, including specific packaging codes, methods, and marking requirements without special markings. The item is not classified as hazardous, and palletization must adhere to DLA packaging standards. Delivery is directed to the Distribution Management Office at Camp Kinser, Japan, with transportation governed by DLA procedural notes C19 and C20. The contract references the DLA Master List of Technical and Quality Requirements for all technical and quality specifications, with the applicable revision controlled by the solicitation issue date. The purchase request number is 7017559669, and the required delivery date is July 17, 2026. The contract is under the Department of Defense’s Land Supply Chain, with the primary point of contact being Michael Nordahl, and the solicitation response deadline is August 3, 2026.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
PLUG, EXPANSIONThe contract is for the procurement of 24 units of PLUG, EXPANSION with NSN 5340-01-509-7937 under solicitation SPE7L0-26-T-0375, issued by the Department of Defense through the Land Supply Chain ESOCS Buys office. Delivery is required within five days of contract award and must be shipped FOB origin to the Letterkenny Army Depot in Chambersburg, Pennsylvania, using the fastest traceable means, explicitly prohibiting parcel post. The item is designated as a critical application item for Cummins Inc part number 3093782, and no ozone-depleting chemicals may be used in its manufacture or packaging, with any substitute chemicals requiring prior approval unless authorized by specification. Packaging must comply fully with MIL-STD-2073-1E and MIL-STD-129 for marking, with a U code for packaging, no special marking required, and palletization per DLA standards. The unit of issue is each, priced at $24.00 per unit, with zero variance allowed in quantity. Inspection and acceptance occur at the destination. The required delivery date is July 20, 2026, and all technical and quality requirements referenced by R or I numbers are governed by the current DLA Master List of Technical and Quality Requirements as of the solicitation issue date.
LAND SUPPLY CHAIN ESOC BUYS

POSTED

about 13 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332510
New
DIBBS
RING, RETAININGThe contract covers the procurement of 1,585 retaining rings with NSN 5325-00-169-8023 under solicitation SPE4A6-26-T-08HH, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R or I numbers, with revision control based on solicitation or award date depending on acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have government identification removed. Items must bear physical identification per bare item marking requirements. Sampling follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; critical, major, and minor attributes are verified at levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Item Unique Identification is not required per customer request. Tailored quality requirements apply to both manufacturers and non-manufacturers, with inspection and acceptance occurring at origin. Technical data associated with this item is subject to export controls under ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, with DFARS 252.225-7048 enforcing compliance. Access to controlled data is restricted to contractors with approved US/Canada Joint Certification Program certification, completed DOD export control training, and DLA authorization. The place of performance is New Cumberland, PA, and the point of contact is Monica Clark of the ASC Commodities Division, Department of Defense.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
MH60GUIDEXThe contract MH60GUIDEX under solicitation SPE4A1-26-T-2470 pertains to the procurement of 23 units identified by NSN 5340-01-521-7001 for delivery to Robins AFB, Georgia, with a deadline of 171 days after award. It mandates compliance with Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements as a certified third-party assessment organization and incorporates stringent controls for Covered Defense Information, requiring adherence to DLA’s technical and quality standards referenced in the Master List. The supplier must retain supply chain traceability documentation per DLAD Procurement Note C03 from August 2016, and while Item Unique Identification is not required, removal of government identification from non-accepted supplies is mandated. Packaging must comply with DLA standards, and technical data associated with the item is subject to export control under ITAR or EAR, restricting access to contractors with approved JCP certification, completed training, and DLA authorization. Sampling procedures must conform to MIL-STD-1916, ASQ H1331, or an equivalent zero-based plan, with specified verification levels and AQLs for critical, major, and minor attributes; if unspecified, attributes are deemed major. Sikorsky Corporation’s alternate sampling plan QAP 1201 is acceptable provided it meets or exceeds the performance of MIL-STD-1916 or ASQ H1331, and zero non-conformances are required unless otherwise stipulated. Measuring and test equipment must be calibrated and controlled, and all technical data must be protected against unauthorized export, including to foreign nationals within the U.S., under DFARS 252.225-7048. The contract is issued by the Department of Defense’s Aviation Supply Chain under NAICS code 332510, with Monneka Giles as the primary point of contact, and the solicitation was posted on July 21, 2026, with responses due by July 29, 2026.
AVIATION SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RIVET, BLINDThe contract is for the procurement of 167 units of blind rivets with NSN 5320-01-460-3819 under solicitation SPE4A6-26-T-08QP, issued by the Department of Defense’s ASC Commodities Division. Delivery is required within 20 days of award, with shipment originating FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with ASTM D3951, unless superseded by stricter DLA Master List of Technical and Quality Requirements. Packaging and labeling must adhere to MIL-STD-129, and palletization must follow DLA packaging standards. The rivets are to be shipped by traceable freight methods, explicitly prohibiting parcel post, to the designated Tinker AFB delivery point. The required delivery date is July 15, 2026, with the solicitation open for response until July 29, 2026. The contract references specific supplier part numbers including AF9253-4-03 and CR6253-4-03, and the unit of issue is each, priced at $167 per unit for a total contract value of $27,889. All government requirements and technical specifications referenced through R or I numbers take absolute precedence over general standards.
ASC COMMODITIES DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
COUPLING, CLAMP, GROOVEDThis contract specifies the procurement of a grooved coupling and clamp, identified by NSN 5340-01-714-1224 and part number NV1021906T001, for a quantity of three units under solicitation SPE4A5-26-T-298B. The item is classified as a critical application item supplied by Hamilton Sundstrand Corporation and must comply with stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including packaging, marking, and inspection standards set by MIL-STD-2073-1E and MIL-STD-129. All packaging and preservation methods must adhere to DLA’s RP001 guidelines, prohibiting the use of mercury or mercury-containing compounds in preservation, packaging, or marking, with specific exceptions for functional uses in batteries, instruments, sensors, and weapon systems as defined by NAVSEA. Mercury-containing portable lamps and instruments must include a secondary containment boundary and be shock-proof in compliance with NAVSEA 5100-003D. Delivery is required FOB origin within 171 days of contract award, with zero tolerance for quantity variance, and inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and attributes are assigned verification levels VII, IV, and II for critical, major, and minor characteristics respectively. The contract mandates strict adherence to DLA packaging and marking procedures, with no special marking required and palletization conforming to DLA standards. The delivery deadline is January 17, 2027, with the original required delivery date set for January 17, 2028. All shipments must be addressed to the DLA Distribution facility at DDSP New Cumberland and transportation logistics must follow DLAD Proc Notes C19 and C20. The contract was posted on July 21, 2026, with responses due by July 29, 2026, under NAICS code 332510 for industrial machinery manufacturing.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
LEVER, LOCK-RELEASEThe contract pertains to the procurement of a Lever, Lock-Release with NSN 5340-01-453-2554 and part number A6210372, under solicitation SPE7LX-26-U-8896, issued by the Department of Defense’s Strategic Acquisition Program Directorate. A total quantity of 135 units is requested at a unit price of $135.00, for a total contract value of $18,225. Delivery is required within 65 days FOB origin, with no variance allowed in quantity. The item is covered under DLA Direct, CONUS terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA’s packaging requirements and MIL-STD-129 for marking and labeling, with non-hazardous material packaged per ASTM D3951 unless a higher-priority DLA Master List technical or quality requirement applies. Hazardous materials must follow TQ requirement IP025 per Fed-Std-313. The packaging must also adhere to the DLA Packaging Requirements for Procurement (RP001) and palletization standards. Identification of the item must conform to MIL-STD-130N for military property marking, and the contractor must ensure all government identification is removed from non-accepted supplies. The solicitation is open via DIBBS, and the contract is subject to the revision of the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. The primary point of contact is Theodore Misiolek, with response due by August 5, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 332510
New
DIBBS
SPACER, RINGThe contract is for the procurement of two SPACER, RING units with NSN 5365-01-393-9408 under solicitation SPE4A7-26-T-587Y, with a delivery deadline of 171 days after award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item is subject to export control under either ITAR or EAR, restricting disclosure of associated technical data to foreign persons without prior authorization from the Department of State or Department of Commerce, including foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program status, completed DOD export control training, and DLA authorization may access the controlled data. Quality requirements include inspection and acceptance at origin, removal of government identification from non-accepted items, physical identification and bare item marking, and adherence to tailored higher-level quality standards applicable to both manufacturers and non-manufacturers. Packaging must conform to DLA standards, and the item falls under the Cybersecurity Maturity Model Certification (CMMC) Level 2 requirements for third-party assessors. Covered defense information applies, and the place of performance is documented as Bremerton, Washington, with Tamera Greene as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThis contract pertains to the procurement of a spacer sleeve with part number 60-550-0247-1, supplied by Flowserve Corp under a Department of Defense solicitation numbered SPE4A7-26-T-586H. The item is classified as a critical application item and must comply with stringent DLA packaging and quality requirements, including adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with no special marking codes applied. Mercury and mercury-containing compounds are strictly prohibited in the material or its contact surfaces, except for specified functional uses such as batteries, fluorescent lamps, instrumentation, weapons systems, and chemical reagents as defined by NAVSEA; portable devices containing mercury must include shockproof construction and a secondary containment boundary per NAVSEA 5100-003D. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stipulated, with attributes classified as critical, major, or minor assigned corresponding verification levels or AQLs. The contract specifies a quantity of 15 units with no variance allowed, to be delivered FOB origin within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. Delivery must align with the original required date of November 4, 2027, and the need ship date of January 17, 2027. The NSN for the item is 5365-01-280-6923, and it is procured under a simplified acquisition process governed by the DLA Master List of Technical and Quality Requirements in effect on the solicitation issue date. All shipments must comply with DLA’s transportation procedures outlined in DLAD Proc Notes C19 and C20.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThe contract pertains to the procurement of 176 units of a spacer sleeve identified by NSN 5365-00-174-8620 and part number NAS43HT8-92, governed by technical and quality requirements from the DLA Master List of Technical and Quality Requirements, specifically referencing NAS43 Revision 12 dated 11/30/2012. The item is classified as a critical application item, and all quality verification must adhere to zero non-conformances in sampling unless otherwise stipulated, with inspection methods following MIL-STD-1916 or ASQ H1331 Table 1, and attributes assigned specific verification levels or AQLs. Packaging and marking must comply strictly with MIL-STD-2073-1E and MIL-STD-129, with no special marking required, and palletization aligned with DLA packaging standards. The item must be delivered FOB origin within 171 days from contract award, with no tolerance for quantity variance, and is subject to inspection and acceptance at the destination. Delivery is directed to the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation compliance must follow DLAD Proc Notes C19 and C20. The original required delivery date was October 20, 2026, with a need-by date of January 17, 2027, under solicitation SPE4A7-26-T-585N, issued by the Department of Defense under NAICS code 332510.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASEThe contract pertains to the procurement of a PIN, QUICK RELEASE with NSN 5315-01-015-6854, for a quantity of 29 units at a unit price of $29.00, totaling $841.00, under solicitation SPE4A7-26-T-587P. Delivery is required within 20 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the point of origin. Packaging must comply with MIL-STD-2073-1E, including specific preservation methods, wrapping, and packing level B, with marking conforming to MIL-STD-129 and no special marking codes. Palletization follows DLA packaging requirements, and shipment is directed to a military facility in Nantou County, Taiwan. The item is subject to DLA’s Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, requiring zero non-conformances unless otherwise specified. Cybersecurity compliance mandates a CMMC Level 2 self-assessment, and covered defense information provisions apply. The unit of issue is EA, adhering to authorized DoD standards, and the point of contact for inquiries is Brad Ingram of the Department of Defense. The required delivery date is July 24, 2026, with solicitation responses due by July 29, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP.This contract, identified as CLAMP, LOOP, is a solicitation under number SPE7LX-26-U-8888 issued by the Strategic Acquisition Program Directorate within the Department of Defense for the procurement of eight units of a specific clamp and loop component with NSN 5340-00-582-1474. The solicitation is a total small business set-aside under NAICS code 332510, with responses due by August 5, 2026, and an anticipated delivery deadline of 48 days after award. The contract incorporates all technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, with compliance determined by the revision in effect on the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, subject to any amendment updates. Strict prohibitions apply against the intentional addition of mercury or mercury-containing compounds to the supplied hardware, except for specific functional applications including batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, and chemical reagents authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment boundary to prevent leakage, per NAVSEA 5100-003D. All government identification must be removed from non-accepted supplies, and full compliance with these stipulations is mandatory for contract fulfillment.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance & Incident ReportingThe contract requires full implementation of NIST SP 800-171 cybersecurity controls to safeguard controlled unclassified information within the contractor’s systems, alongside the development of a comprehensive System Security Plan that documents how these controls are applied and maintained. The contractor must establish processes to ensure continuous compliance with these standards and be prepared to report any cyber incident affecting covered defense information within 72 hours, in strict accordance with DFARS 252.204-7012 requirements. This effort is critical for maintaining the integrity and security of sensitive government data handled under this subcontract. This subcontract is issued under the Department of Defense by the ASC Commodities Division, with the NAICS code 541512 indicating it pertains to computer systems design services. While no set-aside type or specific point of contact is provided, the solicitation remains open for responses until August 4, 2026, with a posting date of July 21, 2026. The place of performance has not been specified, and bidders must review the full solicitation through the provided DIBBS link to ensure alignment with all technical, administrative, and reporting obligations tied to this cybersecurity compliance effort.
Computer Systems Design Services

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection & Sampling ServicesThe contract requires the provision of quality inspection and sampling services adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with AQL criteria, where zero nonconformances are mandatory for acceptance. Inspections must be conducted with precision to ensure all delivered products meet the defined quality standards without exception, reflecting a zero-tolerance policy for defects. The work is classified as a subcontract under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and the solicitation posted on July 21, 2026. The place of performance and point of contact details are not specified, suggesting the work may be performed at multiple locations or as directed by the contracting office. Interested parties must review the full solicitation through the provided DIBBS link to understand specific deliverables, reporting requirements, and compliance obligations beyond the sampling standards outlined.
Engineering Services

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
Military-Compliant Packaging, Labeling & Preservation ServicesThe contract requires the provision of military-compliant packaging, labeling, and preservation services for defense shipments, adhering strictly to MIL-STD-129 and DLA RP001 standards. All materials and processes must ensure corrosion protection and full regulatory compliance for use in military logistics, with an emphasis on durability, traceability, and environmental resilience under operational conditions. The work involves end-to-end preparation of items for shipment, including proper identification, marking, and preservation techniques to safeguard equipment and supplies from degradation during storage and transit. This subcontract opportunity is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and a posting date of July 21, 2026. The NAICS code 332999 indicates it falls under other miscellaneous fabricated metal product manufacturing, suggesting the work may involve custom packaging solutions or specialized container fabrication. The place of performance and specific delivery locations are not detailed, but fulfillment is expected to support military supply chain operations globally. Interested parties must submit proposals before the deadline to be considered for award under this unspecified set-aside solicitation.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
Precision Pressure Gauge Manufacturing & SupplyThe contract seeks the manufacture or supply of a military-specification pressure gauge identified by NSN 6685-01-131-8110, requiring full compliance with established material and performance standards for military applications. All units must be delivered in original, corrosion-free packaging to ensure integrity during transport and storage, and must meet all technical and quality requirements dictated by defense specifications. The solicitation is issued as a subcontract under NAICS code 334519 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to align with DoD procurement protocols.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, PRESSURThe contract specifies the procurement of a pressure transmitter identified by part number 2600331-1 and NSN 6685011136087, with a requirement for two units to be delivered within 115 days to Barstow, California, under solicitation SPE4A6-26-T-08LN. The item is source-controlled and must be manufactured and tested in accordance with limited rights data held by approved sources, primarily Senso-Metrics Inc. and Soco Technologies Inc., with no government-provided technical data; only vendors with access to this data or proven traceability to approved sources may quote. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, adopting zero non-conformances unless otherwise directed. Specific clauses mandate that critical attributes be verified at Level VII, major at IV, and minor at II with corresponding AQLs, while unspecified attributes are treated as major. The item is designated as a critical application component and must comply with drawing 2600331 Revision E dated June 15, 2012, with certain test requirements from specification 2600380 Rev B waived and soldering procedures left to manufacturer discretion. Packaging must adhere to DLA-specific standards per RP001 and MIL-STD-129, with hazardous materials following TQ Requirement IP025 per FED-STD-313 and nonhazardous materials conforming to ASTM D3951, ensuring DLA requirements override all other standards. Item markings must comply with RQ017 for physical identification, and all packaging must be palletized per DLA guidelines. The contract imposes Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment obligations and mandates Source Approval Request (SAR) documentation for any vendor seeking source approval. Delivery is FOB origin with zero quantity variance, inspected and accepted at destination. The unit of issue is each, priced at $2.00 per unit for a total value of $4.00, with delivery directed to the DLA Distribution Office in Barstow. The item is subject to strict compliance with documentation, cybersecurity, quality, and packaging mandates, and all contractual obligations take precedence over industry defaults.
Other Measuring and Controlling Device Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE EXTThe contract specifies the procurement of tube assemblies for a fire extinguishing system, with two approved part numbers from KIDDE TECHNOLOGIES INC: P/N 423117 and P/N 432117, classified as critical application items. The item is identified by NSN 4210-01-643-8401, with a quantity of six units, each to be delivered as a single unit of issue. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RC001 for source approval documentation, RP001 for packaging standards, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for bare item marking. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs per critical, major, or minor classifications. Packaging must meet MIL-STD-2073-1E with specific preservation methods, and marking must comply with MIL-STD-129 without special codes. Palletization follows DLA packaging requirements. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The required delivery date is January 17, 2028, with a lead time of 171 days, and shipment must be sent to the DLA Distribution Albany facility in Albany, Georgia. The contract was solicited under SPE4A6-26-T-08EA with a response deadline of July 29, 2026, and the purchasing agency is the Department of Defense, ASC Commodities Division.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLINDRThis solicitation is for a cylindrical roller bearing, part number 59637, with NSN 3110003853504, requiring five units for delivery within 305 days FOB origin. The item is source controlled and must be manufactured and tested in strict compliance with limited rights data held by approved sources—Parker Hannifin and Regal Beloit America, Inc.—with no government provision of the technical data. Only vendors with direct access to this data or traceability to the approved sources may submit quotes. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, with more than 50 percent of the total cost of all components—rolling elements, retainer, inner and outer race—originating from these regions. A signed Contractor’s Declaration regarding domestic content is mandatory and must be submitted upon request; failure to provide it will disqualify the quote. Inspection and acceptance occur at the origin, and no unit identification is required under DFARS 252.211-7003(c)(1)(i). Packaging must fully comply with MIL-STD-2073-1E, MIL-DTL-197M, and DLA packaging requirements, including preservation methods tailored to bearing type and closure, with all marking conforming to MIL-STD-129. The item is designated as critical application and has no shelf life. All measures, testing equipment, and quality controls must meet the DLA Master List of Technical and Quality Requirements, and the entire procurement is subject to restrictions outlined in DFARS 252.225-7016. If no compliant offers are received, the solicitation may be canceled or held pending a waiver.
Ball and Roller Bearing Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
PANEL, INDICATING, LIGHTThe contract specifies the procurement of five units of a light-transmitting indicating panel, identified by NSN 6220-01-509-3310 and part number 74J808070-823, with delivery required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must conform to rigorous technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, with verification levels and sampling methods strictly defined per MIL-STD-1916 or comparable zero-based sampling plans; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Manufacturing and packaging adherence is mandated under DLA Packaging Requirements and MIL-STD-2073-1E, with packaging coded as U, using E5 unit containers and no cushioning material. All items must be marked per MIL-STD-129 with the special fragile code 01-01, and palletization must comply with DLA guidelines. The supplier must maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance and remove government identification from non-accepted supplies. The delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at destination, and the contract requires adherence to specific transportation protocols per DLAD Proc Notes C19 and C20. The original required delivery date is December 18, 2027, with a need ship date of January 17, 2027, under solicitation SPE4A6-26-T-08CN, issued by the Department of Defense’s ASC Commodities Division.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 213113
New
DIBBS
BEARING, SLEEVEThe contract pertains to the procurement of a sleeve bearing with NSN 3120-01-286-0906, quantity of four units, under solicitation SPE4A6-26-T-08MV. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date depending on acquisition size. Inspection and acceptance occur at origin using sampling methods aligned with MIL-STD-1916 or ASQ H1331, Table 1, or a zero-based plan; critical, major, and minor attributes are verified at levels VII, IV, and II with AQLs of 0.1, 1.0, and 4.0 respectively. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The item is designated as a critical application requiring casting or forging, with tooling typically held by the manufacturer, and sourcing assistance must be requested through DLA’s designated channels. Only approved sources are KAMATICS CORPORATION and ROLLER BEARING COMPANY OF AMERICA, each with specific part numbers. Item Unique Identification is not required per the Service customer’s request. Delivery is FOB origin with a 171-day lead time, final delivery due by April 20, 2027, and shipment must be directed to the DLA Distribution facility in New Cumberland, Pennsylvania. Packaging and palletization adhere strictly to DLA’s procurement standards, and all documentation must support source approval and manufacturing compliance.
Support Activities for Coal Mining

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334419
New
DIBBS
LIGHT, INDICATORThe contract specifies the procurement of a light indicator component with NSN 6210011737858 under solicitation SPE4A6-26-T-08UD, requiring delivery of three units at one each to the USS FRANK E PETERSEN JR DDG 121 at FPO AP 96691 by June 25, 2026, with a 20-day delivery window and FOB destination terms. Strict compliance with DLA packaging standards MIL-STD-2073-1E and marking requirements MIL-STD-129 is mandated, including fragile labeling and prohibition of mercury or mercury compounds in preservation, packaging, or marking. The item is classified as a critical application with bare part marking requirements for DRS NAVAL POWER SYSTEMS INC P/N 6981ED166-535, and sampling must follow MIL-STD-1916 or ASQ H1331 with zero non-conformances unless otherwise specified. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced online, with revisions controlled by the solicitation or amendment date. No shelf life applies, and quantity variance is strictly zero percent. Shipping and transportation follow DLAD procedural notes C19 and C20, with vendors required to use VSM for logistics. The contract enforces zero tolerance for mercury exposure and mandates compliance with verified sampling levels and packaging codes for unit containment and protection.
Other Electronic Component Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
NUT, IMPELLER, LEFT HANDThe contract specifies the procurement of two left-hand impeller nuts, identified by NSN 5310-01-424-5905 and part number 15-0125-01, manufactured by Buffalo Pumps Inc. and supplied under solicitation SPE4A6-26-T-08ST. The item is classified as a critical application component and must comply with stringent technical and quality requirements referenced from the DLA Master List, including packaging standards per MIL-STD-2073-1E and marking per MIL-STD-129. Sampling follows MIL-STD-1916 or equivalent zero-based plans with strict acceptance criteria: critical attributes require zero non-conformances, and unspecified attributes are treated as major. Mercury and mercury-containing compounds are strictly prohibited in the item, its preservation, packaging, or marking, except for specified functional uses in instrumentation or batteries, which must include secondary containment per NAVSEA 5100-003D. Preservation is to be conducted in accordance with ASTM D3951 using preservation method code 10. Delivery is FOB origin with no quantity variance allowed, and inspection and acceptance occur at the destination warehouse in Tracy, California. The delivery window is 171 days from contract award, with a required ship date of January 17, 2027, and the original delivery deadline was October 30, 2026. All logistics and transportation protocols follow DLA procedural notes C19 and C20, and the unit of issue is each (EA) at a unit price of $2.00, totaling $4.00.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details