Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, October 28 at 2:00 PM ET

Register Free →
CLEATUS
Get CLEATUS

PIN, STRAIGHT, HEADED

Active
SPE4A6-27-T-4885Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation SPE4A6-27-T-4885 is a fixed-price procurement issued by the DLA Weapons Support ASC Commodities Division for one straight, headed pin, identified by NSN 5315-00-143-6480. The item must be manufactured in accordance with Basic Drawing NR 19207 7373314 Revision C. Delivery is required within 20 days after order, with an original required delivery date of September 17, 2025. The shipment must be sent via traceable means to the freight shipping address in Pocatello, Idaho, with FOB terms set to Origin. Quality assurance is managed through destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, and palletization must follow DLA requirement RP001. The contract incorporates various FAR and DFARS clauses, including those for safeguarding covered defense information, the Buy American Act, and the Berry Amendment. Payment and receiving reports must be processed electronically through the Wide Area WorkFlow system. All quotes must be submitted via the DIBBS portal.

General Info

Fixed-price procurement for one straight headed pin delivered to Pocatello, Idaho.

Agency

Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

NAICS

332618 - Other Fabricated Wire Product Manufacturing

Place of Performance

10820 FAIRGROUNDS RD, POCATELLO, ID, 83202-1748, USA

Set-Aside

NONE

Documents

1

RFQ SPE4A6-27-T-4885

PDF, High priority: read this firstrfq
High

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / AgencyDepartment Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION
Office AddressUSA
Contacts
Debra Fowler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,STRAIGHT,HEADED
PIN, STRAIGHT, HEADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL IDENTIFICATION/BARE ITEM MARKING
DETAILED DRAWING
THE DRAWING(S) LISTED BELOW ARE AVAILABLE AT
DLA DURING "OPEN SOLICITATION ONLY".
TO RECEIVE A COPY OF THE DRAWING(S)<(>,<)>
FOR EBS SOLICITATIONS USE URL
HTTPS://WWW.DIBBS.BSM.DLA.MIL/RFQ/
CERTIFICATE OF CONFORMANCE PROCEDURES (FAR 52.246-15) ARE AUTHORIZED,
UNLESS WITHELD BY A QUALITY ASSURANCE LETTER OF INSTRUCTION.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
TDP Rev A Gen 1 IAW BASIC DRAWING NR 19207 7373314 REVISION NR C DTD 01/29/1969 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 19207 7373314 REVISION NR DTD
SPE4A6-27-T-4885
SECTION B
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018689800 0001 EA 1.000
NSN/MATERIAL:5315001436480
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:20 CLNG/DRY:1 PRESV MAT:19
WRAP MAT:GH CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BS OPI:M
INTRMDTE CONT:ED INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W63R27
W8S1 ID ARNG FMS 5
10820 FAIRGROUNDS RD
POCATELLO ID 83202-1748
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W63R27
W8S1 ID ARNG FMS 5
10820 FAIRGROUNDS RD
POCATELLO ID 83202-1748
US
MARKFOR
W63R27
SPE4A6-27-T-4885
SECTION B
PR: 7018689800 PRLI: 0001 CONT’D
W8S1 ID ARNG FMS 5
10820 FAIRGROUNDS RD
POCATELLO ID 83202-1748
US
M/F: (TCN) W63R2752550049
RDD:
PROJ: TP 3
SUPP ADD: W81H2P SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: KS
Need Ship Date:00/00/0000 Original Required Delivery Date:09/17/2025
SPE4A6-27-T-4885 NSN/Part Number: 5315-00-143-6480 Quantity: 1 EA Purchase Request: 7018689800QTY: 1 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
Federal
53--KEY
Solicitation # N0010426QFF94
This contract, issued under solicitation number N0010426QFF94 by the Naval Supply Systems Command Weapon Systems Support in Mechanicsburg, Pennsylvania, is for the procurement of a critical shipboard component known as the Key (KARON Block), designated as SPECIAL EMPHASIS Level I material due to its direct impact on the safety and operational integrity of naval vessels. The item must be manufactured strictly in accordance with Kamatics Drawing KPD4544 and comply with stringent quality, traceability, and certification requirements. All materials must be mercury-free, and non-metallic components must meet NAVSEA SS800-AG-MAN-010/P-9290 toxicity and flammability standards. The contract mandates full traceability from raw material through final assembly, requiring permanent markings on the product and corresponding Objective Quality Evidence (OQE) linked to each unit, with controls to prevent commingling or loss of traceability during subcontracted processes. The contractor must maintain a certified quality management system compliant with ISO-9001, ISO-10012, and ISO/IEC 17025, or alternatively MIL-I-45208 and MIL-STD-45662, subject to government audit at any time. Inspection and acceptance are governed by zero-defect sampling standards, with 100% review of all certification documents, test reports, and traceability records. A detailed Certificate of Compliance is required for each shipment, including specific certifications for lubricants, weld procedures, and HM&E testing, signed by authorized personnel. All waivers, deviations, and engineering change proposals must be formally submitted and approved by the Contracting Officer prior to implementation and annotated in WAWF with designated ship-to and inspect-by codes. Delivery schedules require certification data submission 20 days prior to shipment, with final acceptance only granted after Portsmouth Naval Shipyard review and explicit approval via WAWF. The contract enforces Buy American and Federal Trade Agreement compliance, prohibits unauthorized distribution of technical data, and retains government authority to perform source inspection at any point in the supply chain, including subcontractor facilities.
Navsup Weapon Systems Support Mech

POSTED

about 5 hours ago

DEADLINE

in about 1 month
View Details
NAICS: 332618
New
SLED
3/8" High Strength Strand Link SupplierThis subcontract agreement establishes a partnership for the supply of 3/8 inch high strength strand link to prime contractors serving the City of Greensboro in North Carolina. The selected supplier is responsible for manufacturing or sourcing high-strength steel alloy strand link that adheres to strict technical specifications and high-strength industry standards. The scope of work includes the packaging, preparation, and physical delivery of the materials to designated locations. This opportunity is categorized under NAICS code 332618, with a response deadline set for October 21, 2026.
City of Greensboro

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332618
New
SLED
STRAND LINK 3/8" HIGH STRENGTH
Solicitation # 12550
The City of Greensboro in North Carolina has issued solicitation number 12550 to secure a firm, delivered price for 3/8 inch high strength strand link. This procurement event was posted on October 15, 2026, with a response deadline of October 21, 2026. Suppliers are advised to submit their bids through the GePS website at least 24 hours before the closing deadline to avoid potential service interruptions. The award process for service contracts is qualifications-based, focusing on identifying the best qualified and responsive bidder. A key component of the evaluation is the City of Greensboro Local Preference Policy, which grants a 5 percent point advantage to eligible local bidders who have maintained a significant business presence for at least one year within Greensboro, High Point, or Guilford County. This preference applies unless the contract is deemed urgent, related to fuel, a cooperative purchase, or otherwise excluded by the City Manager's Office.
City of Greensboro

POSTED

about 21 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332618
New
DIBBS
Manufacturer of Cotter Pins (NSN 5315-12-164-9019)This subcontract through the Department of Defense DLA Weapons Support ASC Commodities Division requires the manufacture and delivery of 534 cotter pins to prime contractors. The fasteners must be produced according to NSN 5315-12-164-9019 specifications using metal forming and pressing equipment, with a strict prohibition on additive manufacturing. The contractor is responsible for providing finished and packaged pins that comply with ASTM D3951 and MIL-STD-129 standards. Compliance with the Buy American Act and the Berry Amendment is mandatory for this engagement. Additionally, the manufacturer must maintain a certified quality system under either SAE AS9003 or ISO 9001. The performance of the contract is centered in New Cumberland, Pennsylvania, with a response deadline set for October 23, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
Wire Rope Assembly FabricationThis subcontract involves the fabrication and supply of 16 wire rope assemblies for prime contractors supporting the Department of Defense DLA Weapons Support ASC. The manufacturer is responsible for the cutting, swaging, and termination of wire rope with end fittings, ensuring all products meet the specific requirements of NSN 4010016168866 and P/N CWRUGC-469. Strict quality and regulatory standards apply to this project, including mandatory Berry Amendment compliance. All assemblies must undergo quality sampling according to MIL-STD-1916 or ASQ H1331 and be marked in accordance with RQ017. The work is associated with NAICS code 332618 and is to be performed in Tracy, California.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
Mil-Spec Wire and Connector SupplyThis subcontract involves the supply of raw electrical wire, shielding, and connectors to prime contractors supporting the DLA Weapons Support ASC Commodities Division. The materials are specifically required for the fabrication of three cable assemblies and must be sourced in strict accordance with Drawing 30003 618AS198 Revision F. The provider is required to submit Certificates of Conformance to verify compliance with the Buy American Act and DFARS 252.204-7010 concerning prohibited telecommunications equipment. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332618.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
Specialty Wire Rope and Hardware SupplyThis subcontract, managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, involves the procurement of specialty wire rope and hardware. The supplier is responsible for providing high-strength wire rope, ferrules, sleeves, sockets, and thimbles that meet specific diameter and grade requirements for assembly BP-ACA2753-1. All specialty steel or alloy materials must be compliant with the Berry Amendment, and the supplier must provide Mill Test Reports to ensure material certification and traceability. The scope of work requires the delivery of bulk raw materials to the fabricator, with performance taking place in Greensboro. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026. This effort falls under NAICS code 332618 and supports prime contractors in fulfilling DLA supply contracts.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
Wire Rope Assembly Fabrication (OEM/Authorized)This subcontract involves the manufacture and assembly of 520 Single Leg Wire Rope Assemblies for prime contractors supporting DLA supply contracts. The scope of work requires precision cutting, swaging, and termination of wire rope according to Trijicon part number BP-ACA2753-1. All production must utilize wire rope swaging and crimping machinery and employ materials that are compliant with the Berry Amendment. The project is managed under the Department of Defense through the DLA Weapons Support ASC Supplier Order OEM Division and will be performed in Greensboro, North Carolina. Strict adherence to MIL-STD-2073-1E, MIL-STD-129, and DFARS 252.204-7012 is required. The final deliverable consists of 520 completed and packaged assemblies.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
Zinc-Coated Improved Plow Steel Wire Rope SupplierThis subcontract, issued by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, requires the supply of 1.75 reels of zinc-coated, improved plow steel wire rope. The material must be 3/8 inch in diameter with a right regular lay and preformed wire rope with a fiber core, adhering strictly to RR-W-410J and DLA requirements RQ006, RQ011, and RQ017. Performance will be measured by quality testing conducted per MIL-STD-1916 or ASQ H1331, with packaging following ASTM D3951 and MIL-STD-129 standards. The contract mandates full compliance with the Buy American Act and the Berry Amendment. The place of performance is located in New Cumberland, Pennsylvania. Interested parties should note the response deadline of October 23, 2026, for this procurement categorized under NAICS code 332618.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
MIL-SPEC Special Purpose Cable Assembly FabricationThis subcontract, issued by the Department of Defense DLA Weapons Support ASC Commodities Division, requires the fabrication of 24 special purpose electrical cable assemblies under NSN 6150-01-619-9818. The project mandates strict adherence to MIL-DTL-24368/1C, MIL-C-24368B(1), and the DLA Master List of Technical and Quality Requirements. To ensure quality and compliance, all components must be sourced exclusively from QPL or QML providers, and all hardware and packaging must be mercury-free. The opportunity is designated as a Total Small Business Set-Aside under NAICS code 332618, with performance taking place in Tracy, California. Interested parties must respond by October 23, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
Supply of Headless Straight Pins (NSN 5315-99-979-4484)This subcontract involves the supply of precision-manufactured headless straight pins for prime contractors supporting DLA Weapons Support ASC projects. The contractor is responsible for manufacturing or sourcing pins that strictly adhere to NSN 5315-99-979-4484 specifications and DLA Master List RA001. Quality assurance must be conducted through sampling in accordance with MIL-STD-1916 or ASQ H1331, and all materials are required to comply with the Buy American Act and the Berry Amendment. The scope of work requires the delivery of four headless straight pins to DLA Distribution DDSP in New Cumberland, Pennsylvania. This opportunity is categorized under NAICS code 332618 and is managed by the Department of Defense. Interested parties must respond by October 23, 2026.
DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
High-Strength Wire Rope and End-Fitting SupplyThis subcontract, titled High-Strength Wire Rope and End-Fitting Supply, involves the provision of raw wire rope and associated end-fittings to prime contractors supporting DLA supply contracts. All materials must strictly adhere to the grade and diameter specifications outlined in Drawing L2984699. To ensure quality and regulatory compliance, the supplier is required to provide material test reports and certificates of conformance, while maintaining strict adherence to the Buy American Act and the Berry Amendment for domestic sourcing. Managed by the Department of Defense under the DLA Weapons Support ASC Supplier Order OEM Division, the contract falls under NAICS code 332618. The place of performance is located in Barstow, California. Interested parties should note the response deadline of October 23, 2026, for this procurement of critical hardware components and raw wire rope.
DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 334419
New
DIBBS
59--CABLE ASSEMBLY,SPECIAL
Solicitation # SPE4A6-27-T-4905
Solicitation SPE4A6-27-T-4905 is a total small business set-aside request for quotations issued by the DLA Weapons Support ASC Commodities Division for the procurement of 18 electrical special purpose cable assemblies, identified by NSN 5995-01-463-2524. Categorized as measuring and test equipment, the items must be delivered FOB origin to Industries of the Blind Inc. in Greensboro, North Carolina, with a delivery window of 284 days after award and a need ship date of April 6, 2027. The contractor is required to maintain a quality management system compliant with ISO 9001:2015 and must perform first article testing on two units in accordance with Drawing 12465333. The contract contains stringent technical and regulatory requirements, including compliance with ITAR and EAR export controls, which restrict the disclosure of technical data to authorized persons. Packaging and marking must adhere to MIL-STD-2073-1E, MIL-STD-129, and specific requirements outlined in Drawing 12465372 and SPI# AM12465372. Additionally, the procurement is subject to the Buy American Act and the Berry Amendment. Invoicing and payment requests must be processed electronically through the Wide Area WorkFlow system. Offerors are instructed to submit their quotes via the DIBBS portal and are encouraged to provide quantity ranges due to potential demand volatility.
Other Electronic Component Manufacturing

POSTED

about 5 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335220
New
DIBBS
Specialized Electrical Component SupplyThis subcontract for Specialized Electrical Component Supply supports the DLA Weapons Support ASC Commodities Division within the Department of Defense. The scope of work involves providing specialized wiring and connectors to prime contractors, with all materials sourced according to TDP Rev A Gen 2 and Drawing NR 30554 series. The contractor is responsible for delivering raw materials and connectors to the assembly manufacturer and providing necessary certifications of compliance for all components. Strict adherence to the Buy American Act and Berry Amendment is required for all supplied materials. The project is associated with NAICS code 335220 and is designated for performance at Fort Leonard Wood. The solicitation was posted on October 15, 2026, with a response deadline of October 23, 2026.
Major Household Appliance Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 335999
New
DIBBS
Special Purpose Electrical Cable Assembly FabricationThis subcontract involves the fabrication of special purpose electrical cable assemblies for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The work must be performed in accordance with TDP Rev A Gen 2 and Drawing NR 30554 04-40199, with specific requirements for wiring and termination based on the DLA Master List. Quality assurance and marking must adhere to MIL-STD-1916 and MIL-STD-129 standards, respectively, and the contractor must maintain compliance with DFARS 252.204-7012. The project is categorized under NAICS code 335999 and will be performed at Fort Leonard Wood. The scope of work concludes with the delivery of fully completed and tested cable assemblies. Interested parties should note the response deadline of October 23, 2026.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332812
New
DIBBS
Supply of Certified Aerospace Alloy StockThis subcontract involves the supply of certified aerospace-grade raw metal alloy stock, specifically in the form of bars or wire, for prime contractors working on DLA Weapons Support ASC projects. The materials must strictly adhere to the chemical and physical properties outlined in NASM20426, NASM5674, and drawing NR 13873. To ensure quality and regulatory compliance, the provider must deliver full material traceability and Mill Test Reports, while guaranteeing that all material origins comply with the Berry Amendment and the Buy American Act. The contract is managed under the Department of Defense through the DLA Weapons Support ASC Commodities Division, with the place of performance located at Tinker AFB. Interested parties must respond by October 23, 2026, to provide the certified raw material stock directly to the manufacturer.
Metal Coating, Engraving (except Jewelry and Silverware), and Allied Services to Manufacturers

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332994
New
DIBBS
Manufacture of Solid Rivets (NSN 5320-00-638-9059)This subcontract involves the manufacture of solid rivets for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The project requires the production of rivets according to standards NASM20426, NASM5674, and drawing NR 13873 EI-006389059, utilizing precision cold-heading or machining equipment. A total of 4 lbs of finished rivets must be delivered, packaged in accordance with ASTM D3951 and MIL-STD-129, with performance taking place at Tinker AFB. Qualified providers must hold SAE AS9003 or ISO 9001 quality certification and ensure full compliance with the Buy American Act and the Berry Amendment. The use of additive manufacturing is strictly prohibited for this contract. Interested parties should note the response deadline of October 23, 2026, for this Department of Defense requirement under NAICS code 332994.
Small Arms, Ordnance, and Ordnance Accessories Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488510
New
DIBBS
MIL-SPEC Packaging and Marking ServicesThis subcontract involves providing military-grade packaging and marking services for prime contractors supporting the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work focuses on the processing of critical pump components, specifically three sleeve bearings, ensuring full compliance with MIL-STD-129, MIL-STD-2073-1E, and RP001 standards. Technical requirements include the application of preservation method 33, cleaning and drying method 1, and the use of G8 wrap material, utilizing specialized military-grade marking equipment. The completed deliverables are to be shipped to DLA Distribution DDSP in New Cumberland, Pennsylvania. This project falls under NAICS code 488510 and was posted on October 15, 2026, with a response deadline of October 23, 2026.
Freight Transportation Arrangement

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332991
New
DIBBS
Manufacturer of Sleeve Bearings (NSN 3120-00-336-9385)This subcontract involves the manufacture and supply of three precision-machined sleeve bearings for prime contractors supporting the DLA Weapons Support ASC Commodities Division. The components must be produced according to NSN 3120-00-336-9385 specifications and adhere to the DLA Master List of Technical and Quality Requirements RA001. To ensure quality and safety, the manufacturer must use precision equipment to guarantee materials are mercury-free and maintain certification in SAE AS9100, SAE AS9003, or ISO 9001. The project is categorized under NAICS code 332991, with performance taking place in New Cumberland. The finished sleeve bearings are to be delivered FOB Origin. Interested parties must respond by October 23, 2026, regarding this Department of Defense requirement.
Ball and Roller Bearing Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
Supply of Socket Head Cap Screws (NSN 5305016688614)This subcontract involves the manufacture or procurement of 2,000 socket head cap screws to support prime contractors delivering for the DLA Weapons Support ASC Commodities Division. The items must strictly adhere to NSN 5305016688614 and RA001 technical specifications. All deliverables must comply with the Buy American Act and meet quality standards established by MIL-STD-1916 and ASQ H1331. Logistical requirements mandate that packaging, marking, and identification follow MIL-STD-2073-1E, MIL-STD-129, and MIL-STD-130N respectively. The final shipment of 2,000 units is to be delivered to the BT Collins USARC facility located in Sacramento, California.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 488410
New
DIBBS
MIL-SPEC Packaging and Preservation ServicesThis subcontract for MIL-SPEC Packaging and Preservation Services supports prime contractors on projects for the Department of Defense DLA Weapons Support ASC Commodities Division. The scope of work involves performing specialized preservation, packaging, and marking of shipping containers to ensure they are ready for delivery to DLA Distribution Cherry Point. All activities must be executed in strict accordance with MIL-DTL-197M for preservation, MIL-STD-129 for marking, and RP001 for palletization, utilizing industrial marking equipment and MIL-SPEC materials. The project is categorized under NAICS code 488410 and is based in Cherry Point, North Carolina. Interested parties should note the response deadline of October 23, 2026. The contract focuses on the technical execution of military-grade logistics standards to ensure the integrity and traceability of equipment during transport.
Motor Vehicle Towing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
Manufacturer of Inner Bearing Rings (NSN 3110-01-065-9772)This subcontract involves the manufacture and supply of 156 precision-machined inner bearing rings, identified by Part Number MS51962-7 and NSN 3110-01-065-9772, for prime contractors supporting the DLA Weapons Support ASC Commodities Division. Performance will take place in Cherry Point, and all products must be manufactured in accordance with the DLA Master List of Technical and Quality Requirements. The selected provider must utilize precision machining equipment and strictly adhere to DFARS 252.225-7016 domestic sourcing regulations. Additionally, the contractor is required to maintain CMMC Level 2 certification and hold a quality management system certification in either SAE AS9003 or ISO 9001.
Hardware Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 334512
New
DIBBS
Supply of Ambient Temperature Sensors (NSN 6685-01-443-4207)This subcontract involves the manufacture or sourcing of 22 warranted ambient temperature sensors for prime contractors supporting the Department of Defense. The sensors must strictly adhere to NSN 6685-01-443-4207 and Reference Drawing NR 99207 5107T18, Revision B. Final delivery of the units is required at DLA Distribution Jacksonville. To be eligible, providers must hold US/Canada Joint Certification Program certification and maintain CMMC Level 2 compliance. All shipments must be packaged in accordance with ASTM D3951 and MIL-STD-129 standards. The contract is managed under the DLA Weapons Support ASC Commodities Division.
Automatic Environmental Control Manufacturing for Residential, Commercial, and Appliance Use

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332999
New
DIBBS
Supply of Specialized Metal Stock for Fastener ProductionThis subcontract involves the supply of specialized raw metal rod or wire stock intended for prime contractors delivering to the DLA Weapons Support ASC Commodities Division. The materials must strictly adhere to the specifications outlined in drawing 56161 10503412 and be delivered directly to the manufacturer. To ensure regulatory compliance, the provider must furnish Mill Test Reports verifying that the specialty metals are domestically sourced in accordance with the Berry Amendment and the Buy American Act. Performance for this contract is centered in New Cumberland, Pennsylvania, under NAICS code 332999.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 24 hours ago

DEADLINE

in 7 days
View Details

Ready to Pursue This Opportunity?

Get AI-powered intelligence on this solicitation and the ones like it

Every page of the solicitation package shredded into a compliance breakdown

AI-powered matching based on your capabilities and past performance

Competitor and incumbent history on the requirement

Automated alerts on amendments, Q&A deadlines, and award

Miguel
Hillary
Keith Deutsch
Christine

Join 750+ contractors already using CLEATUS