Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN, STRAIGHT, HEADED

Active
SPE4A6-26-T-03YDFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 114 straight headed pins with NSN 5315-01-483-3075 under solicitation SPE4A6-26-T-03YD, issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within 171 days after order, with a response deadline of July 20, 2026. Technical and quality requirements referenced in this contract are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on the acquisition size. Packaging must conform to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Inspection and acceptance occur at origin, and any non-accepted supplies must have government identification removed. The item is subject to strict controls regarding mercury: it must not contain or come into direct contact with mercury or mercury compounds except for functional uses in batteries, fluorescent lights, instruments, sensors, weapon systems, or specified chemical reagents. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier as per NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under ITAR or EAR, and disclosure to foreign persons—regardless of location—is prohibited without prior authorization. Only contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal approval may access the controlled data. The place of performance is New Cumberland, PA, with Debra Fowler as the primary point of contact.

General Info

114 straight headed pins procured by Defense Logistics Agency for federal use, response due July 15, 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-03YD DLA Aviation Jul 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Debra Fowler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,STRAIGHT,HEADED
PIN,STRAIGHT,HEADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5315-01-483-3075 Quantity: 114 EA Purchase Request: 7017408431QTY: 114 Delivery: 171 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
TIE DOWN, CARGO, AIRCRAFTThis contract pertains to the procurement of a Tie Down, Cargo, Aircraft, identified by NSN 1670-01-599-2776, with a single unit requirement and a firm fixed price structure. The item is designated as a Critical Safety Item by both the Navy and Air Force, requiring strict adherence to safety and quality standards, including mandatory inspection and verification by qualified personnel through QPL procedures as defined in MIL-DTL-25959J Revision 1, with no authorization for Alternative Repair Procedures. All components must comply with stringent quality benchmarks including SAE AS9100, and the item must be manufactured without intentional addition of mercury except in specified exceptions such as functional batteries or instruments, with additional containment requirements for portable devices. The supplier must ensure supply chain traceability in accordance with DLA Directive Procurement Note C03 and maintain documentation for audit purposes. Packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, including lot and serial numbers, contractor and manufacturer CAGE codes, and part numbers on every unit pack. Sampling for inspection must conform to MIL-STD-1916 or a comparable zero-defect plan, with verification levels assigned to critical, major, and minor attributes. The delivery timeline is set for 522 days after contract award, with inspection and acceptance occurring at origin, and the item must be shipped FOB destination with specific palletization and packaging standards outlined in DLA packaging directives. Manufacturing may involve casting or forging operations where the government does not hold the necessary tooling; suppliers are advised to submit a Casting and Forging Assistance Request if required. Any waiver or deviation from contractual requirements must be formally submitted to the DSC Contracting Officer for approval. The item is also subject to the DLA Master List of Technical and Quality Requirements, with specific references to RQ009 for origin inspection, RQ016 for qualified product lists, RQ018 for traceability retention, RT001 for calibrated test equipment, and RQ039 for higher-level quality compliance. All documentation must align with the contract’s referenced specifications, including QAP-13873 and SD-6, and the unit of issue must correspond to the approved DoD ANSI X12 standard. Failure to meet any of these requirements, particularly those tied to safety and traceability, will result in rejection of the supply.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

in about 3 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
Manufacture of Aircraft Cargo Tie-Down AssembliesThe contract calls for the full production of cargo tie-down assemblies identified by NSN 1670-01-599-2776, encompassing all stages from fabrication and assembly to rigorous testing and certification in compliance with military standards. This effort is critical to ensuring the safety and operational readiness of aircraft cargo systems, requiring precise adherence to technical specifications and quality controls defined by defense requirements. The work must be executed to meet the stringent durability, load capacity, and reliability benchmarks established for military aviation applications. Issued as a subcontract under NAICS code 332510, the opportunity is managed by the ASC SUPPLIER OPER AE AND AF DIV within the Department of Defense. The solicitation was posted on July 16, 2026, with responses due by August 17, 2026. Performance will be executed in accordance with defense logistics protocols, though specific location details are not provided. The contract vehicle is accessible via the DIBBS platform, and all qualified subcontractors must ensure complete compliance with federal acquisition regulations and military certification procedures to be eligible for award.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

in about 3 hours

DEADLINE

in about 1 month
View Details
NAICS: 332510
New
DIBBS
PIN, QUICK RELEASEThe contract pertains to the procurement of a quick-release pin identified by NSN 5315-01-367-4891 and part number MS17985C524, with a requirement for 19 units to be delivered within 20 days FOB origin. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with compliance enforced through referenced standards including NAS1332 Rev 9 and NASM17985 Rev 2, and mandatory adherence to MIL-STD-129 for labeling and packaging as per ASTM D3951, unless superseded by higher-priority DLA standards. Inspection and acceptance occur at origin, with zero non-conformances required under sampling protocols such as MIL-STD-1916 or ASQ H1331 Table 1, and attributes are classified with verification levels or AQLs of VII, IV, and II for critical, major, and minor characteristics respectively. Packaging and palletization must conform to RP001 DLA Packaging Requirements, with no tolerance allowed in quantity variance. The item is designated as a critical application component, requiring full compliance with stringent quality assurance provisions including ISO 9001:2015 for manufacturers. Shipping must be via the fastest traceable means, prohibited from parcel post, and directed to a specific military receiving facility at Joint Base MDL, New Jersey, with delivery tied to a required date of May 1, 2026. The contract includes mandatory marking, identification, and documentation controls, and is issued under solicitation SPE4A6-26-T-06TU with a single unit price of $19.00 per ea, totaling $361.00, under a federal acquisition framework with primary point of contact at DLA.
ASC COMMODITIES DIVISION

POSTED

about 21 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SPACER, SLEEVEThis contract is for the procurement of 36 units of the spacer sleeve identified by NSN 5365013925084 and part number 49484-2, supplied by Eaton Aerospace LLC, Thomas Instrument, Incorporated under codes 50LP4 and 5H860. The requirements are governed by the DLA Master List of Technical and Quality Requirements, which take precedence over all other standards including ASTM D3951, and packaging must strictly comply with MIL-STD-129 and DLA Packaging Requirements for Procurement. The item is classified as a critical application item with zero tolerance for quantity variance, and delivery must be FOB origin with inspection occurring at the destination. Packaging must be palletized according to DLA specifications and labeled with the correct unit of issue and quantity per unit pack as defined in the contract. The delivery window is 161 days from the contract award, with an original required delivery date of January 25, 2028, and a needed ship date of January 5, 2027. The contract is issued under solicitation SPE7M4-26-T-265C and is managed by the Department of Defense’s Fluid Handling Division, with delivery directed to DLA Distribution Depot Hill at Hill AFB, Utah, and transportation logistics governed by DLA procedural notes C19 and C20.
FLUID HANDLING DIVISION

POSTED

about 21 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
Supply of End Strap Clips (NSN: 5340015966650)The contract entails the manufacture and delivery of six units of the End Strap Clip, identified by National Stock Number 5340015966650 and part number C6205518560, to the Letterkenny Army Depot in Pennsylvania. The delivery must be completed by July 22, 2026, ensuring compliance with the specified timeline and location. The work falls under the NAICS code 332510, which classifies it within the forgings and stampings manufacturing sector. This is a subcontract awarded under the auspices of the Defense Logistics Agency, part of the Department of Defense, with no set-aside provisions applied. The contract was posted on July 15, 2026, and all deliverables are tied to the referenced DLA award record, which can be accessed via the provided DIBBS link for contractual documentation and tracking purposes.
Defense Logistics Agency

POSTED

about 21 hours ago

DEADLINE

N/A
View Details