This Solicitation opportunity from Department Of Defense was posted on June 2, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PIN, STRAIGHT, HEADED

Closed

SPE4A6-26-T-78N8Federal

Submission Closed06/10/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7LX-26-U-9811

Solicitation SPE7LX-26-U-9811 is a request for quotations issued by the Department of Defense, specifically the DLA Land and Maritime Strategic Acquisition Program Directorate, for the procurement of O-rings under NSN 5331-01-078-5127. This is a total small business set-aside under NAICS code 332618. The procurement may result in a unilateral indefinite delivery contract with a maximum value of 350,000 dollars, an estimated annual quantity of 481 units, and a guaranteed minimum of 72 units. Delivery is required within 88 days after receipt of order, with shipping terms set as FOB Origin. The contract mandates strict quality and material standards, requiring that all supplied items be free of asbestos and that mercury or mercury-containing compounds not be intentionally added. Packaging must comply with MIL-STD-2073-1E and RP001, while marking must adhere to MIL-STD-129. Inspection and acceptance will occur at the destination. Award evaluation is based on price, and the contract incorporates various FAR and DFARS clauses, including requirements for CMMC Level 2 self-assessment and the use of the Wide Area WorkFlow system for electronic invoicing. Offerors must also comply with the Buy American Act and the Berry Amendment regarding domestic material restrictions.

STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

DEADLINE

PIN, SHOULDER, HEADLE

Solicitation # SPE4A7-26-T-715G

This solicitation, identified as SPE4A7-26-T-715G, is issued by the Department of Defense ASC Supplier Oper AE and AF Div for the procurement of ten headless shoulder pins under NSN 5315-01-577-3247. The contract requires delivery within 10 days after receipt of order and specifies performance at Fort Campbell. The response deadline for this federal solicitation is September 11, 2026. The agreement incorporates several critical regulatory and technical requirements, including DLA packaging standards and the protection of covered defense information. Suppliers must adhere to the DLA Master List of Technical and Quality Requirements and ensure the removal of government identification from any non-accepted supplies. Additionally, the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with specific exceptions for functional components as defined by NAVSEA.

ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Quick Release Pins

POSTED

DEADLINE

53--PIN,QUICK RELEASE

Solicitation # SPE7L1-26-T-11C8

Solicitation SPE7L1-26-T-11C8 is a request for quotations issued by the Department of Defense, DLA Land and Maritime, for the procurement of 11 quick release pins (NSN 5315017276779). This is a fixed-price contract and a total small business set-aside under NAICS code 332618. The solicitation was posted on September 11, 2026, with a response deadline of September 21, 2026. All quotes must be submitted electronically via the DLA Internet Bid Board System (DIBBS). The contract requires delivery to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with shipping terms set as FOB Origin under the First Destination Transportation program. Inspection and acceptance will occur at the destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129, with palletization following RP001 requirements. Offerors must comply with the Buy American Act and the Berry Amendment, and any hazardous materials must be labeled according to the Hazard Communication Standard. Invoicing and payment processing are required through the Wide Area Workflow (WAWF) system.

POSTED

DEADLINE

Supply of O-Rings (NSN 5331-01-181-4941)

POSTED

DEADLINE

Supply of O-Rings (NSN 5331-01-007-4895)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Specialized Wire and Connector Supply

ASC COMMODITIES DIVISION

POSTED

DEADLINE

Manufacture of Stainless Steel Tensioner Belt

Defense Logistics Agency

POSTED

DEADLINE

Supply of Straight Headless Pins (NSN 5315-01-552-1148)

AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

DEADLINE

Supply of PRI-Accredited Synthetic Rubber O-Rings

FLUID HANDLING DIVISION

POSTED

DEADLINE

Solicitation # SPE7M4-26-T-392R

This contract is for the procurement of synthetic rubber O-rings, specifically part number MS29513-155 under NSN 5331005293723. The requirement consists of two line items totaling 451 units, with 225 units destined for DLA Distribution New Cumberland and 226 units for DLA Distribution Barstow. The items must be produced by an accredited manufacturer listed on the PRI Qualified Manufacturer List (QML) or Qualified Products List (QPL) and must adhere to SAE AS29513 and SAE AMS-P-5315C standards. Key technical requirements include a non-extendable shelf life of 180 months and a strict prohibition on the intentional addition of mercury or asbestos. Packaging must comply with MIL-STD-2073-1E and MIL-DTL-117, utilizing medium-duty, waterproof, greaseproof, opaque bags to prevent deterioration from ultraviolet rays. Delivery is required within 105 days, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination.

FLUID HANDLING DIVISION

POSTED

DEADLINE

SWA GING SLEEVE, WIRE

Solicitation # SPE4A6-26-R-XD83

Solicitation SPE4A6-26-R-XD83 is a Total Small Business Set-Aside issued by the DLA Aviation ASC Commodities Division for the procurement of wire rope swaging sleeves (NSN 4030004315537). The requirement is structured as a Simplified Indefinite-Delivery Contract (SIDC) with a five-year term or a total aggregate ceiling of 350,000 dollars. The scope includes a guaranteed minimum quantity of 173 units for the first base year, with delivery order ranges between 173 and 700 units, and a monthly wartime surge rate of 56 units starting 30 days after order. Supplies are to be delivered to various CONUS stock locations with inspection and acceptance occurring at the source. Technical requirements specify zinc coating per ASTM B633 and adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Due to the nature of the technical data, contractors must maintain an approved US/Canada Joint Certification Program certification to comply with ITAR or EAR export controls. Award decisions will be based on the most advantageous offer, weighing price, past performance (with a heavy emphasis on SPRS assessments), and quoted delivery. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and compliance with CMMC Level 2 cybersecurity standards. Quotations were due by September 21, 2026.

ASC COMMODITIES DIVISION

POSTED

2 days ago

DEADLINE

in 9 days

General Info

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-78N8.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedJun 2

Solicitation

Response DeadlineJun 10

Deadline has passed

Submission Closed

06/10/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

View Agency Profile

Office AddressUSA

Contacts

Ahoefa Simons De Fanti

contact@example.gov

+1 (555) 000-0000

Full Description

PIN,STRAIGHT,HEADED
PIN,STRAIGHT,HEADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
THIS ITEM IS IDENTIFIED AS A COMMERCIAL OFF THE SHELF (COTS) ITEM
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. RQ019: Federal Aviation Administration (FAA) Airworthiness Approval RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RQ046: FAA Bare Item Marking Requirements RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
SPE4A6-26-T-78N8
SECTION B
CRITICAL APPLICATION ITEM
AVIBANK MFG., INC. 84256 P/N 56684-12
THE BOEING COMPANY 81205 P/N S310T410-12
IAW REFERENCE QAP 13873 CDRL-FAACERTCOM-25015
REVISION NR DTD 01/14/2025
PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016878711 0001 EA 5.000
NSN/MATERIAL:5315016560657
DELIVERY (IN DAYS):0245
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:33 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:BE OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
SPE4A6-26-T-78N8
SECTION B
PR: 7016878711 PRLI: 0001 CONT’D
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:02/11/2027 Original Required Delivery Date:02/11/2027
SPE4A6-26-T-78N8 NSN/Part Number: 5315-01-656-0657 Quantity: 5 EA Purchase Request: 7016878711QTY: 5 Delivery: 245 days ADO