This Solicitation opportunity from Department Of Defense was posted on May 17, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PIN, STRAIGHT, HEADED

Closed

SPE4A6-26-T-59M2Federal

Submission Closed05/26/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 326220

New

DIBBS

BELT, VThis contract is a solicitation for the procurement of a single unit of a V-belt identified by the National Stock Number 3030-01-539-5803, under the purchase request number 7017145744. The solicitation, designated SPE7L1-26-T-706Z, was posted on June 15, 2026, with a response deadline of June 26, 2026. The contract is managed by the Defense Logistics Agency within the Department of Defense and is intended for federal use. Specific details regarding the place of performance and points of contact are not provided in the contract data. The solicitation is accessible through the Defense Logistics Agency's online portal.

Defense Logistics Agency

POSTED

DEADLINE

HOSE ASSEMBLYThis contract, issued by the Department of Defense's Navsup Weapon Systems Support Mech office, pertains to the procurement of hose assemblies under solicitation number N0010426QBX31 with a NAICS code of 326220. The solicitation was posted on June 15, 2026, with a response deadline of July 13, 2026. All contractual documents related to this procurement are considered officially issued upon transmission via mail, fax, or electronic means, and a bilateral agreement is established upon the government's acceptance of the contractor’s proposal. The contract establishes that in case of discrepancies, Section C terms take precedence over Section D. Procurement documentation such as repair part ordering data, technical specifications, drawings, and data packages are integral to the contract and must be obtained and complied with at the specified revision levels. The contractor is required to maintain a government-approved inspection system and keep thorough inspection records. Quality assurance obligations are detailed within the Individual Repair Part Ordering Data (IRPOD). Packaging must meet cleanliness controls as specified in applicable military standards (e.g., MIL-PRF-23199) and ensure no intentional use of mercury or mercury-containing compounds. The contract mandates timely submission of certification and procedural documents, including a Certificate of Compliance upon material delivery and pre-manufacturing submittals within 45 days after award for approval. Document distribution follows strict security and distribution classification codes per DoDI 5230.24, and any waiver or deviation requests must be properly justified, evaluated, and approved by the contracting officer and government quality assurance representatives. The contract also incorporates cybersecurity maturity model requirements and has provisions for equal opportunity compliance, stop-work orders, and priority ratings related to national defense and emergency preparedness.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

40--FIBER ROPE ASSEMBLYThe contract solicitation seeks quotes for the procurement of fiber rope assemblies under NSN 4020010476815. Specifically, it involves the purchase of 141 individual fiber rope assemblies to be delivered to DLA Distribution Red River within 270 days after order, along with an additional single unit to be delivered within 120 days. This solicitation encourages all responsible sources to submit quotes electronically, which will be evaluated if received on time. Issued by the Defense Logistics Agency Troop Support under the Department of Defense, this opportunity is a total small business set-aside in accordance with FAR 19.5, aligned with NAICS code 326220. The solicitation, posted on June 15, 2026, has a response deadline of July 15, 2026. The office responsible for this procurement is located in Philadelphia, Pennsylvania, and potential offerors can direct questions to the designated buyer via email or access additional information through the provided federal contracting portal.

POSTED

DEADLINE

O-Ring and Sealing Component Supply

POSTED

DEADLINE

HOSE, NONMETALLICThe contract solicitation is for the procurement of 35 units of nonmetallic hose, identified by NSN/Part Number 4720-01-521-2845. The solicitation, numbered SPE4A1-26-T-2312, was posted on June 14, 2026, with a response deadline set for June 22, 2026. This acquisition is managed by the Defense Logistics Agency, which operates under the Department of Defense, indicating the purchase is for federal government use. Details regarding the place of performance, specific set-aside status, and NAICS code are not provided in the solicitation. The contract is a standard solicitation open for responses until the deadline, and no special small business or priority purchasing programs are noted. The contract links to an online portal for bidders to submit and review relevant documents, facilitating transparent government procurement procedures.

Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 6 days

AI Contract Overview

This contract calls for the supply of four units of a straight, headed pin, specifically identified by the part number 5315-01-680-3667 and purchase request 7016650108. The procurement is governed by stringent technical and quality requirements per the Defense Logistics Agency (DLA) Master List, including sampling methods consistent with military standards MIL-STD-1916 or ASQ H1331 to ensure product conformity, and mandatory packaging and labeling requirements adhering to ASTM D3951 and MIL-STD-129 standards. Inspection and acceptance of the items will occur at the destination, with a specified delivery timeframe of 20 days from award, and shipment must be traceable and not sent via parcel post. The contract further emphasizes compliance with detailed quality control provisions such as removal of government identification on non-accepted supplies and adherence to physical identification protocols. The contract references a critical application item manufactured by Parker Hannifin Corporation under specification MS35810B, revision B, dated 09/10/2019. The shipping destination is Richmond, Missouri, where the packaged items are to be prepared following DLA packaging guidelines, including palletization requirements. The solicitation is issued by the Department of Defense’s ASC Commodities Division with a response deadline set in late May 2026. Contract administration includes clear points of contact and regulatory oversight to ensure compliance with federal acquisition regulations and quality assurance protocols.

General Info

Supply four straight headed pins meeting DLA standards, deliver to Richmond, Missouri within 20 days.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

326220 - Rubber and Plastics Hoses and Belting ManufacturingView NAICS

Place of Performance

860 EAST LEXINGTON STREET, RICHMOND, MO, 64085-0000, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-59M2 DLA Aviation May 18 2026

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 17

Solicitation

Response DeadlineMay 26

Deadline has passed

Submission Closed

05/26/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

Office AddressUS

Contacts

Christina Pyle

contact@example.gov

+1 (555) 000-0000

Full Description

PIN,STRAIGHT,HEADED
PIN,STRAIGHT,HEADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RT001: MEASURING AND TEST EQUIPMENT
CRITICAL APPLICATION ITEM
PARKER HANNIFIN CORPORATION 012A4 P/N 945882
IAW REFERENCE SPEC NR MS35810B NOT 3
REVISION NR B DTD 09/10/2019
PART PIECE NUMBER:
SPE4A6-26-T-59M2
SECTION B
PR: 7016650108 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016650108 0001 EA 4.000
NSN/MATERIAL:5315016803667
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W56JJA
1135 EN CO CLEARANCE COMPA
860 EAST LEXINGTON
RICHMOND MO 64085-1930
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W51AMH
1135 EN CO CLEARANCE COMPA
860 EAST LEXINGTON STREET
RICHMOND MO 64085-0000
US
MARKFOR
W51AMH
1135 EN CO CLEARANCE COMPA
860 EAST LEXINGTON STREET
RICHMOND MO 64085-0000
US
SPE4A6-26-T-59M2
SECTION B
PR: 7016650108 PRLI: 0001 CONT’D
M/F: (TCN) W51AMH61190019
RDD:
PROJ: TP 3
SUPP ADD: W58MYQ SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 13
DIC: A3A DIST: ADV: FC: KS
Need Ship Date:00/00/0000 Original Required Delivery Date:05/04/2026
SPE4A6-26-T-59M2 NSN/Part Number: 5315-01-680-3667 Quantity: 4 EA Purchase Request: 7016650108QTY: 4 Delivery: 20 days ADO