Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →

PIN, STRAIGHT, HEADED

Active
SPE4A6-26-T-04TRFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 168 straightheaded pins identified by NSN 5315014639274 and part number MS9468-39, governed by technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. All items must comply with stringent packaging requirements under MIL-STD-2073-1E and marking standards per MIL-STD-129, with no special marking applied. Mercury and mercury-containing compounds are strictly prohibited in the hardware, preservation, packaging, and marking unless explicitly exempted for functional components such as batteries, fluorescent lamps, or specified instruments, which must include a secondary containment and comply with NAVSEA 5100-003D. Sampling and inspection follow zero-defect criteria using MIL-STD-1916 or comparable zero-based plans, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecifed attributes are treated as major. Inspection and acceptance occur at origin, with delivery required FOB origin within 170 days of contract award, and no quantity variance is permitted. The items are to be delivered to the designated receiving warehouse in Tracy, California, with transportation governed by DLAD Proc Notes C19 and C20. The contract, issued under solicitation SPE4A6-26-T-04TR, is classified as a simplified acquisition, with the applicable revision of the DLA Master List determined by the solicitation issue date. The required delivery date is January 20, 2027, with a need ship date of January 3, 2027, and the point of contact is Debra Fowler of the ASC Commodities Division, Department of Defense.

General Info

168 straight pins NSN 5315-01-463-9274 solicited by DLA, response due July 16, 2026 via DIBBS.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-04TR.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS

Full Description

Show more
PIN,STRAIGHT,HEADED
PIN,STRAIGHT,HEADED
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
CRITICAL APPLICATION ITEM
TDP Rev A Gen 1 IAW BASIC NON GOVT STD AS9468
SPE4A6-26-T-04TR
SECTION B
REVISION NR DTD
PART PIECE NUMBER: STD P/N MS9468-39
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017408805 0001 EA 168.000
NSN/MATERIAL:5315014639274
DELIVERY (IN DAYS):0170
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:ZZ CUSH/DUNN MAT:ZZ CUSH/DUNN THKNESS:C
UNIT CONT:A1 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
REC WHSE 57
TRACY CA 95304-5000
US
SPE4A6-26-T-04TR
SECTION B
PR: 7017408805 PRLI: 0001 CONT’D
Need Ship Date:01/03/2027 Original Required Delivery Date:01/20/2027
SPE4A6-26-T-04TR NSN/Part Number: 5315-01-463-9274 Quantity: 168 EA Purchase Request: 7017408805QTY: 168 Delivery: 170 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
BRACKET, MOUNTINGThe contract pertains to the procurement of three mounting brackets, identified by part number JG.MT.PALS.075 and NSN 5340-01-680-5453, under solicitation SPE7L1-26-T-846H, issued by the Defense Logistics Agency through its Land Supply Chain organization. Delivery is required at the DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with FOB Origin terms meaning title and risk transfer upon delivery to the carrier at the origin point. The delivery schedule mandates completion within 114 days from the Acceptance Date Order, with a need ship date of November 19, 2026, though the original required delivery date was October 14, 2026. Quantity is fixed at three units with zero variance allowed, and inspection and acceptance are to occur at the destination. Packaging and labeling must strictly follow MIL-STD-129 for marking and barcoding, and palletization must comply with DLA’s RP001 requirements. If the item is hazardous per FED-STD-313, packaging must adhere to TQ requirement IP025; otherwise, commercial packaging under ASTM D3951 applies, though DLA’s Master List of Technical and Quality Requirements supersedes ASTM standards. The contractor must ensure compliance with hazardous material labeling under 29 CFR 1910.1200 and disclose applicable statutory exceptions via a pre-award submission table. Payment and invoice submission are to be processed exclusively via the Wide Area WorkFlow (WAWF) system, with contractors required to be registered in SAM.gov and具备 WAWF access. The contract incorporates numerous FAR and DFARS clauses, including those on employment eligibility, combating human trafficking, sustainable products, cybersecurity safeguards, safeguarding covered contractor information systems, and prohibitions on acquiring certain defense telecommunications equipment or toxic substances like hexavalent chromium. Subcontracting rules for commercial products are governed by specified deviations, and the contractor must affirmatively represent its size status and UEI, with disclosure requirements for joint ventures and covered defense equipment. All submissions must be made electronically via the DIBBS portal by July 27, 2026, and no hard copies are accepted. The contract does not specify unit or total pricing in the CLIN table, and the basis of award is not explicitly stated, though automated award mechanisms are referenced.
LAND SUPPLY CHAIN

POSTED

about 22 hours ago

DEADLINE

in 10 days
View Details