This Solicitation opportunity from Department Of Defense was posted on May 7, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.
PIN, STRAIGHT, HEADED
Contract Overview
Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.
Active Opportunities Like This One
AI Contract Overview
This contract specifies the procurement of straight-headed pins identified by NSN 5315-01-031-5197 and part number SPE4A0-26-T-2989, with a quantity of three units to be delivered within five days of order placement. The item is defined by Army drawing 19207 8722225, but any paint finishing requirements originally on the Army drawing must be replaced with specifications from DCSC drawing 16236 CS-2300-0001, which details chemical agent resistant coatings and high temperature finishes. All technical and quality requirements referenced by R or I numbers must comply with the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation or award date depending on acquisition size. Packaging must adhere to ASTM D3951 unless superseded by DLA requirements, and all items must be marked and labeled per MIL-STD-129. Palletization must follow RP001 guidelines, and the unit of issue is per EA with zero variance allowed in quantity. Inspection and acceptance occur at destination, and sampling must conform to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, applying verification levels VII, IV, and II for critical, major, and minor attributes respectively. Physical marking of the bare items must follow revision D of drawing 19207 8722225 dated May 29, 2025. Shipments must be sent via traceable freight methods, excluding parcel post, to the delivery address in Tallahassee, Florida, with the freight shipping and mark-for address identical. The required delivery date is May 5, 2026, and the contract includes a supplier identification number and project code for tracking purposes. All documentation must reference the DLA master requirements as controlling, and the contracting office is under the Department of Defense’s Aviation Supply Chain E-SOC.
General Info
Agency
NAICS
Place of Performance
1225 EASTERWOOD DR, TALLAHASSEE, FL, 32311-3501, USASet-Aside
Documents
(1)AI Contract Breakdown
Uniform Contract FormatWhat is UCF?
Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.
Timeline
Submission Closed
Organization & Contact Information
Full Description
PIN,STRAIGHT,HEADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
19207 ARMY-TANK AUTOMOTIVE CMD.
IDENTIFY TO:
THE ITEM DESCRIBED IN THIS SOLICITATION
IS DEFINED IN WHOLE OR IN PART BY ARMY
DRAWING(S). THESE DRAWING(S) MAY CONTAIN
A PAINT FINISHING REQUIREMENT. WHERE SUCH
REQUIREMENTS ARE SPECIFIED, USE DCSC DRAWING
16236 CS-2300-0001 IN LIEU OF FINISH REQUIRE
MENTS OF THE ARMY DRAWING(S). THIS DRAWING
CONTAINS SPECIFICATIONS FOR CHEMICAL AGENT
RESISTANT COATINGS (CARC), AND ADDITIONAL
INFORMATION RELATING TO HIGH TEMPERATURE
COATINGS.
DCSC DWG IS AVAILABE AT DISC.
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
IAW BASIC DRAWING NR 19207 8722225
REVISION NR A DTD 06/28/1967
PART PIECE NUMBER: P/N 8722225
IAW REFERENCE DRAWING NR 19207 8722225
REVISION NR DTD 05/29/2025
PART PIECE NUMBER:
SPE4A0-26-T-2989
SECTION B
PR: 7016622254 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016622254 0001 EA 3.000
NSN/MATERIAL:5315010315197
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W32G6Z
0153 AR SQ 01 TRP C0 REAR DET
1225 EASTERWOOD DR
TALLAHASSEE FL 32311-3501
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W81MDW
W8RW FL ARNG FMS 13
1225 EASTERWOOD DR
TALLAHASSEE FL 32311-3501
US
MARKFOR
W81MDW
W8RW FL ARNG FMS 13
1225 EASTERWOOD DR
TALLAHASSEE FL 32311-3501
US
SPE4A0-26-T-2989
SECTION B
PR: 7016622254 PRLI: 0001 CONT’D
M/F: (TCN) W81MDW61200002
RDD: N
PROJ: 07F TP 1
SUPP ADD: W32RRX SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 02
DIC: A3A DIST: ADV: FC: KS
Need Ship Date:00/00/0000 Original Required Delivery Date:05/05/2026
SPE4A0-26-T-2989 NSN/Part Number: 5315-01-031-5197 Quantity: 3 EA Purchase Request: 7016622254QTY: 3 Delivery: 5 days ADO
More opportunities from Department Of Defense → AVIATION SUPPLY CHAIN ESOC BUYS
Same awarding agency
Find Active Opportunities Like This
Get AI-powered intelligence on the opportunities still open
Every page of the solicitation package shredded into a compliance breakdown
AI-powered matching based on your capabilities and past performance
Competitor and incumbent history on the requirement
Automated alerts on amendments, Q&A deadlines, and award
Join 650+ contractors already using CLEATUS