Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN, STRAIGHT, HEADLE

Active
SPE4A6-26-T-08YHFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one straight headle pin with NSN 5315-01-692-3261 through solicitation SPE4A6-26-T-08YH issued by the Defense Logistics Agency’s ASC Commodities Division. Delivery is required within five days of award, and the item is subject to stringent quality and compliance standards including CMMC Level 2 certification for the third-party assessment organization involved. Technical and quality requirements referenced in the DLA Master List govern the specification, with sampling procedures mandated to follow MIL-STD-1916 or an approved zero-based plan, assigning verification levels or AQLs based on attribute criticality, and requiring zero non-conformances for acceptance unless otherwise stated. Export control provisions under ITAR or EAR apply to any technical data associated with the item, restricting access to contractors holding approved JCP certification, having completed required DLA training, and receiving explicit authorization. Packaging, inspection, and marking requirements are strictly defined including the removal of government identification from non-accepted items and bare item marking per RQ017. The point of contact for inquiries is Christina Pyle, and performance is located in N Stonington, Connecticut, with responses due by July 29, 2026.

General Info

Procure one straight headle pin, NSN 5315-01-692-3261, deliver in five days, comply with CMMC Level 2, MIL-STD-1916, ITAR/EAR, JCP certification required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

25 NORWICH WESTERLY RD, N STONINGTON, CT, 06359, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-08YH.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Christina Pyle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,STRAIGHT,HEADLE
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5315-01-692-3261 Quantity: 1 EA Purchase Request: 7016094665QTY: 1 Delivery: 5 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLEThe contract pertains to the procurement of a PIN STRAIGHT HEADLE with NSN 5315-01-717-7767, quantity one, under solicitation SPE4A6-26-T-08ZK, issued by the Defense Logistics Agency’s ASC Commodities Division under the Department of Defense. The item is subject to a 20-day delivery requirement and is classified under NAICS code 332618. The solicitation was posted on July 21, 2026, with a response deadline of July 29, 2026, and the point of contact is Christina Pyle, reachable via email and phone provided. The technical data associated with this item is subject to export controls under either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any disclosure to foreign persons, regardless of location. Only DLA contractors holding an approved U.S./Canada Joint Certification Program certification, who have completed mandatory training on handling DOD export-controlled data and submitted the required questionnaire, may access this information. DFARS 252.225-7048 governs the handling of this data, and the place of performance is specified as Mechanicsburg, Pennsylvania, 17050-2411.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
DOOR, TROUGHThe contract pertains to the procurement of one unit of a door and trough assembly identified by NSN 4010-01-584-6194 and part number 5251292, sourced from ED ETNYRE & CO. The item is a wire rope assembly with no shelf life requirement and must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must adhere to MIL-STD-2073-1E with specific procedures for preservation, including preservative method 10, clean and dry conditions, and no cushioning material. Marking requirements follow MIL-STD-129, and palletization must meet DLA Packaging Requirements for Procurement. The delivery point is FOB origin with inspection and acceptance occurring at destination, and no quantity variance is permitted. The required delivery date is November 17, 2026, with a lead time of 110 days from order, and the shipment is directed to DLA Distribution San Joaquin at Tracy, California. The solicitation number is SPE4A5-26-T-303Y, issued under a federal procurement, with the point of contact being Hien-Van Trinh of the Department of Defense’s ASC Supplier Operation OEM Division.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLEThe contract is for one straight headle pin with NSN 5315-01-725-1769, issued under solicitation SPE4A6-26-T-08ZM by the Defense Logistics Agency’s ASC Commodities Division. The item must be delivered within 20 days after contract award and is subject to multiple technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the acquisition size. Packaging must conform to DLA standards, and any non-accepted supplies must have government identification removed. The item requires physical identification or bare item marking per specified criteria. Technical data associated with this item is subject to export control under ITAR or EAR, restricting disclosure to foreign persons regardless of location, and mandates compliance with DFARS 252.225-7048. Access to this controlled data is limited to contractors with an approved US/Canada Joint Certification Program certification, who have completed required DOD export control training and the DLA questionnaire, and have received formal approval from the DLA controlling authority. The place of performance is Mechanicstown, Pennsylvania, with the primary point of contact being Christina Pyle, reachable via email and phone as listed.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract pertains to the procurement of one straight-headed pin with NSN 5315-01-692-6107, supplied by WING INFLATABLES INC under part number A3020287, under solicitation SPE4A0-26-T-3979. Delivery is required within five days FOB origin, with no tolerance for quantity variance, and both inspection and acceptance occur at the destination. The item must be packaged in compliance with MIL-STD-2073-1E, marked in accordance with MIL-STD-129, and palletized per DLA packaging requirements, with no special marking specified. Sampling and quality verification follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and undefined attributes are treated as major. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is to be shipped to the Distribution Management Office at Camp Kinser, with transportation subject to DLAD procedural notes C19 and C20. The original required delivery date is July 16, 2026, and the contract is classified under NAICS code 332618 with the Department of Defense as the procuring agency.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLE
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract pertains to the procurement of 7 straight-headed pins identified by NSN 5315-01-648-0317 under solicitation number SPE4A6-26-T-08FW, issued by the Department of Defense’s ASC Commodities Division. The delivery deadline is 171 days after order placement, and responses must be submitted by July 29, 2026, with the solicitation posted on July 21, 2026. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions unless an amendment supersedes it. The place of performance is specified as New Cumberland, PA, 17070-5002, and the primary point of contact is Sarah Henderson at sarah.henderson@dla.mil. Government identification must be removed from any non-accepted supplies, and compliance with DLA packaging requirements is mandatory. The NAICS code 332618 indicates the product falls under miscellaneous fabricated metal product manufacturing.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,The contract pertains to the procurement of a single-leg wire rope assembly with part number 901-220-958-006 and NSN 4010-01-560-1710, for a quantity of seven units, under solicitation SPE4A5-26-T-298Z. The item is classified as a critical application component, and all technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, which supersede any conflicting standards. The item must be marked and identified per RQ017, with no unique identification required per the service customer’s directive. Packaging and labeling must comply with MIL-STD-129 and ASTM D3951, subject to precedence of DLA requirements, and palletization must adhere to RP001. Sampling for quality assurance follows MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified; attributes are classified with verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The contract mandates delivery FOB origin within 171 days, with inspection and acceptance occurring at the destination. The delivery point is the DLA Distribution facility in New Cumberland, Pennsylvania, and the required ship date is January 17, 2027, with an original delivery deadline of June 29, 2027. No quantity variance is permitted, and transportation logistics are governed by DLAD procedural notes C19 and C20.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, QUICK RELEASEThe contract pertains to the procurement of 1,277 units of a PIN, QUICK RELEASE component with NSN 5315-01-490-7325 under solicitation SPE4A6-26-T-08TH. Delivery is required within 49 days from the contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with MIL-STD-2073-1E, including specific preservative methods, wrapping, and unit containment standards. Marking is to adhere to MIL-STD-129 without special codes, and palletization must follow DLA packaging requirements. The item is to be delivered to the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA, as specified for both transportation and freight shipping. The contract incorporates all technical and quality requirements referenced in the DLA Master List, with revisions controlled by the solicitation issue date. The unit of issue is each, priced at $1,277.00 per unit, with total contract value reflecting full quantity. The required ship date is July 21, 2026, and the original delivery date is October 14, 2026. The primary point of contact is Susan Barlow, and the NAICS code is 332618.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADEDThe contract specifies the procurement of nine straight headed pins with part number 5315-01-718-2055 under solicitation SPE4A6-26-T-08RH, with a required delivery within 20 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced through R numbers, with applicable revisions controlled by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA standards, and non-accepted supplies must have all government identification removed prior to return. Items must be physically marked per RQ017 requirements, and sampling is mandated to follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The technical data associated with this item is subject to export control under ITAR or EAR, restricting access and disclosure to foreign persons regardless of location, and only contractors approved under the US/Canada Joint Certification Program with verified training and DLA authorization may handle the data. All distribution and handling must comply with DFARS 252.225-7048. The contract falls under NAICS code 332618, is managed by the Department of Defense’s ASC Commodities Division, and solicitations are processed through DLA’s eProcurement portal with contact information provided for primary inquiries.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIREThe contract pertains to the procurement of rope and wire identified by NSN 4010-01-219-2408 and part number BL-10635-1, with a quantity of 13 units issued as individual items. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with ASTM D3951 while strictly adhering to MIL-STD-129 labeling standards and DLA Packaging Requirements, with palletization following RP001 guidelines. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise stated, and critical, major, and minor attributes are assigned verification levels or AQLs as defined. The item is classified as a critical application and must be delivered FOB origin in 217 days to the designated recipient, Industries of the Blind Inc in Greensboro, NC, with no variance allowed in quantity. Inspection and acceptance occur at destination, and the delivery must be completed by March 4, 2027, following specified transportation procedures outlined in DLAD Proc Notes C19 and C20. The unit of issue and pricing are confirmed at $13.00 per unit with total contract value of $169.00.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLEThe contract solicitation is for two straight headless pins identified by NSN 5315-01-668-9874, with a delivery requirement of 20 days after award. The solicitation number is SPE4A6-26-T-08QZ, posted on July 21, 2026, with responses due by July 29, 2026. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless an amendment supersedes it. Packaging must comply with DLA packaging standards, and any non-accepted supplies must have all government identification removed prior to return or disposal. The procurement falls under NAICS code 332618 and is managed by the ASC Commodities Division of the Department of Defense. The primary point of contact is Debra Fowler, reachable via email and phone provided. The contract is a federal solicitation with no set-aside designation, and performance is expected within the United States.
ASC COMMODITIES DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 541512
New
DIBBS
Cybersecurity Compliance & Incident ReportingThe contract requires full implementation of NIST SP 800-171 cybersecurity controls to safeguard controlled unclassified information within the contractor’s systems, alongside the development of a comprehensive System Security Plan that documents how these controls are applied and maintained. The contractor must establish processes to ensure continuous compliance with these standards and be prepared to report any cyber incident affecting covered defense information within 72 hours, in strict accordance with DFARS 252.204-7012 requirements. This effort is critical for maintaining the integrity and security of sensitive government data handled under this subcontract. This subcontract is issued under the Department of Defense by the ASC Commodities Division, with the NAICS code 541512 indicating it pertains to computer systems design services. While no set-aside type or specific point of contact is provided, the solicitation remains open for responses until August 4, 2026, with a posting date of July 21, 2026. The place of performance has not been specified, and bidders must review the full solicitation through the provided DIBBS link to ensure alignment with all technical, administrative, and reporting obligations tied to this cybersecurity compliance effort.
Computer Systems Design Services

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection & Sampling ServicesThe contract requires the provision of quality inspection and sampling services adhering strictly to MIL-STD-1916 or ASQ H1331 sampling plans with AQL criteria, where zero nonconformances are mandatory for acceptance. Inspections must be conducted with precision to ensure all delivered products meet the defined quality standards without exception, reflecting a zero-tolerance policy for defects. The work is classified as a subcontract under NAICS code 541330 and is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and the solicitation posted on July 21, 2026. The place of performance and point of contact details are not specified, suggesting the work may be performed at multiple locations or as directed by the contracting office. Interested parties must review the full solicitation through the provided DIBBS link to understand specific deliverables, reporting requirements, and compliance obligations beyond the sampling standards outlined.
Engineering Services

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332999
New
DIBBS
Military-Compliant Packaging, Labeling & Preservation ServicesThe contract requires the provision of military-compliant packaging, labeling, and preservation services for defense shipments, adhering strictly to MIL-STD-129 and DLA RP001 standards. All materials and processes must ensure corrosion protection and full regulatory compliance for use in military logistics, with an emphasis on durability, traceability, and environmental resilience under operational conditions. The work involves end-to-end preparation of items for shipment, including proper identification, marking, and preservation techniques to safeguard equipment and supplies from degradation during storage and transit. This subcontract opportunity is managed by the ASC Commodities Division within the Department of Defense, with a response deadline of August 4, 2026, and a posting date of July 21, 2026. The NAICS code 332999 indicates it falls under other miscellaneous fabricated metal product manufacturing, suggesting the work may involve custom packaging solutions or specialized container fabrication. The place of performance and specific delivery locations are not detailed, but fulfillment is expected to support military supply chain operations globally. Interested parties must submit proposals before the deadline to be considered for award under this unspecified set-aside solicitation.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 334519
New
DIBBS
Precision Pressure Gauge Manufacturing & SupplyThe contract seeks the manufacture or supply of a military-specification pressure gauge identified by NSN 6685-01-131-8110, requiring full compliance with established material and performance standards for military applications. All units must be delivered in original, corrosion-free packaging to ensure integrity during transport and storage, and must meet all technical and quality requirements dictated by defense specifications. The solicitation is issued as a subcontract under NAICS code 334519 and is managed by the ASC Commodities Division within the Department of Defense, with responses due by August 4, 2026. The place of performance and point of contact details are not specified, but the work is expected to align with DoD procurement protocols.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 13 days
View Details
NAICS: 335311
New
DIBBS
CABLE ASSEMBLY, POWEThis contract is for the procurement of a single cable assembly, power, electrical, identified by NSN 6150-01-690-6204, with a delivery requirement of 10 days after order. The solicitation number is SPE4A6-26-T-08XL, issued by the Defense Logistics Agency’s ASC Commodities Division under NAICS code 335311, with performance to occur at Fort Bragg, North Carolina. The item is subject to stringent quality and technical standards referenced in the DLA Master List, with verification levels assigned per MIL-STD-1916 or ASQ Z1.4 sampling plans, requiring zero non-conformances unless otherwise stated. Attributes are classified with acceptance quality levels of 0.1 for critical, 1.0 for major, and 4.0 for minor, with unspecified attributes treated as major. The manufacturer must comply with DLA packaging requirements, removal of government identification from non-accepted supplies, and physical identification of bare items. Inspection and acceptance occur at origin, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. The contract includes cybersecurity compliance as a condition, requiring CMMC Level 2 certification by a third-party assessment organization. It also incorporates export control provisions under ITAR or EAR, restricting technical data disclosure to foreign persons without prior authorization from the Department of State or Commerce, and mandates compliance with DFARS 252.225-7048. Access to controlled technical data is restricted to contractors with an approved US/Canada Joint Certification Program certification, completion of required DOD export control training, and approval from the DLA controlling authority. Covered defense information applies under RD002, and the contracting office is managed by Alliyah Richmond of the Department of Defense, with a response deadline of July 29, 2026.
Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336413
New
DIBBS
PLATE, STRUCTURAL, AIThe contract specifies the procurement of 68 structural aircraft plates under NSN 1560-01-376-1580, with delivery required within 70 days of order. Technical requirements are governed by engineering drawings and the DLA Master List of Technical and Quality Requirements, where referenced R or I numbers define mandatory compliance standards. Packaging must adhere to DLA specifications, and any configuration changes require formal Engineering Change Proposals or variance requests. Inspection and acceptance occur at the manufacturer’s facility, with strict controls on removal of government identification from non-accepted items. All special processes must be conducted by NADCAP-accredited organizations. Sampling follows MIL-STD-1916 or ASQ H1331 with zero-defect acceptance unless otherwise stated, and unspecified attributes are treated as major. Digital Mylar data provided by DLA must be accurately plotted onto stable base material, with dimensional tolerances strictly enforced across vertical, horizontal, and diagonal measurements, including grid and registration mark precision. Export control applies to technical data under ITAR or EAR, restricting access to authorized U.S. contractors with JCP certification, completed DOD training, and DLA approval. The solicitation number is SPE4A6-26-T-05PQ, issued July 13, 2026, with responses due July 21, 2026, and performance is located at Tinker AFB, Oklahoma.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 334519
New
DIBBS
TRANSMITTER, PRESSURThe contract specifies the procurement of a pressure transmitter identified by part number 2600331-1 and NSN 6685011136087, with a requirement for two units to be delivered within 115 days to Barstow, California, under solicitation SPE4A6-26-T-08LN. The item is source-controlled and must be manufactured and tested in accordance with limited rights data held by approved sources, primarily Senso-Metrics Inc. and Soco Technologies Inc., with no government-provided technical data; only vendors with access to this data or proven traceability to approved sources may quote. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with sampling governed by MIL-STD-1916 or ASQ H1331, adopting zero non-conformances unless otherwise directed. Specific clauses mandate that critical attributes be verified at Level VII, major at IV, and minor at II with corresponding AQLs, while unspecified attributes are treated as major. The item is designated as a critical application component and must comply with drawing 2600331 Revision E dated June 15, 2012, with certain test requirements from specification 2600380 Rev B waived and soldering procedures left to manufacturer discretion. Packaging must adhere to DLA-specific standards per RP001 and MIL-STD-129, with hazardous materials following TQ Requirement IP025 per FED-STD-313 and nonhazardous materials conforming to ASTM D3951, ensuring DLA requirements override all other standards. Item markings must comply with RQ017 for physical identification, and all packaging must be palletized per DLA guidelines. The contract imposes Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment obligations and mandates Source Approval Request (SAR) documentation for any vendor seeking source approval. Delivery is FOB origin with zero quantity variance, inspected and accepted at destination. The unit of issue is each, priced at $2.00 per unit for a total value of $4.00, with delivery directed to the DLA Distribution Office in Barstow. The item is subject to strict compliance with documentation, cybersecurity, quality, and packaging mandates, and all contractual obligations take precedence over industry defaults.
Other Measuring and Controlling Device Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 333998
New
DIBBS
TUBE ASSEMBLY, FIRE EXTThe contract specifies the procurement of tube assemblies for a fire extinguishing system, with two approved part numbers from KIDDE TECHNOLOGIES INC: P/N 423117 and P/N 432117, classified as critical application items. The item is identified by NSN 4210-01-643-8401, with a quantity of six units, each to be delivered as a single unit of issue. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers including RC001 for source approval documentation, RP001 for packaging standards, RQ011 for removal of government identification from non-accepted supplies, and RQ017 for bare item marking. Sampling and inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated, and attributes are assigned verification levels or AQLs per critical, major, or minor classifications. Packaging must meet MIL-STD-2073-1E with specific preservation methods, and marking must comply with MIL-STD-129 without special codes. Palletization follows DLA packaging requirements. Delivery is FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The required delivery date is January 17, 2028, with a lead time of 171 days, and shipment must be sent to the DLA Distribution Albany facility in Albany, Georgia. The contract was solicited under SPE4A6-26-T-08EA with a response deadline of July 29, 2026, and the purchasing agency is the Department of Defense, ASC Commodities Division.
All Other Miscellaneous General Purpose Machinery Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332722
New
DIBBS
SCREW, MACHINEThis contract pertains to the procurement of 879 units of a machine screw assembly identified by NSN 5305-00-139-8178 and manufacturer part number ABS20642-4F14 from PattonAir USA Inc, categorized as a critical application item and classified as a commercial item with no shelf life requirement. The solicitation, issued under number SPE4A6-26-T-05QR, is a total small business set-aside under NAICS code 332722, with responses due by July 21, 2026, and award anticipated to follow. Delivery is required within 80 days of contract award, with product to be shipped FOB origin to Robins Air Force Base, GA, and acceptance and inspection to occur at the destination. The item must comply with all DLA Master List of Technical and Quality Requirements, including physical identification and bare item marking per RQ017, removal of government identification from non-accepted supplies per RQ011, and packaging standards per RP001 and ASTM D3951, though DLA requirements supersede ASTM where applicable. Packaging must be marked and labeled in accordance with MIL-STD-129, palletized as specified in RP001, and include a quantity per unit pack of 15. Sampling for quality assurance must adhere to MIL-STD-1916, ASQ H1331 Table 1, or an equivalent zero-based plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively; unspecified attributes are considered major. Acceptance requires zero non-conformances if MIL-STD-105 or ASQ Z1.4 is utilized. The item is subject to covered defense information requirements under RD003 and must comply with applicable cybersecurity and information safeguarding clauses including 252.204-7012. Contractors must use Wide Area Workflow for invoicing and receiving reports, comply with hazard communication standards for labeling, and affirm compliance with the Berry Amendment and Buy American Act. All offerors must be registered in the System for Award Management, represent their small business status accurately, and avoid providing covered defense telecommunications equipment or services unless exempted. The contract includes clauses on whistleblower rights, combating human trafficking,
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 2 days
View Details
NAICS: 332991
New
DIBBS
BEARING, ROLLER, CYLINDRThis solicitation is for a cylindrical roller bearing, part number 59637, with NSN 3110003853504, requiring five units for delivery within 305 days FOB origin. The item is source controlled and must be manufactured and tested in strict compliance with limited rights data held by approved sources—Parker Hannifin and Regal Beloit America, Inc.—with no government provision of the technical data. Only vendors with direct access to this data or traceability to the approved sources may submit quotes. The bearing must be manufactured entirely in the United States, its outlying areas, or Canada, with more than 50 percent of the total cost of all components—rolling elements, retainer, inner and outer race—originating from these regions. A signed Contractor’s Declaration regarding domestic content is mandatory and must be submitted upon request; failure to provide it will disqualify the quote. Inspection and acceptance occur at the origin, and no unit identification is required under DFARS 252.211-7003(c)(1)(i). Packaging must fully comply with MIL-STD-2073-1E, MIL-DTL-197M, and DLA packaging requirements, including preservation methods tailored to bearing type and closure, with all marking conforming to MIL-STD-129. The item is designated as critical application and has no shelf life. All measures, testing equipment, and quality controls must meet the DLA Master List of Technical and Quality Requirements, and the entire procurement is subject to restrictions outlined in DFARS 252.225-7016. If no compliant offers are received, the solicitation may be canceled or held pending a waiver.
Ball and Roller Bearing Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336320
New
DIBBS
PANEL, INDICATING, LIGHTThe contract specifies the procurement of five units of a light-transmitting indicating panel, identified by NSN 6220-01-509-3310 and part number 74J808070-823, with delivery required within 171 days to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must conform to rigorous technical and quality standards referenced through the DLA Master List of Technical and Quality Requirements, with verification levels and sampling methods strictly defined per MIL-STD-1916 or comparable zero-based sampling plans; critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Manufacturing and packaging adherence is mandated under DLA Packaging Requirements and MIL-STD-2073-1E, with packaging coded as U, using E5 unit containers and no cushioning material. All items must be marked per MIL-STD-129 with the special fragile code 01-01, and palletization must comply with DLA guidelines. The supplier must maintain Cybersecurity Maturity Model Certification Level 2 self-assessment compliance and remove government identification from non-accepted supplies. The delivery is FOB origin with no variance allowed in quantity, inspection and acceptance occur at destination, and the contract requires adherence to specific transportation protocols per DLAD Proc Notes C19 and C20. The original required delivery date is December 18, 2027, with a need ship date of January 17, 2027, under solicitation SPE4A6-26-T-08CN, issued by the Department of Defense’s ASC Commodities Division.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 18 hours ago

DEADLINE

in 7 days
View Details