Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, STRAIGHT, HEADLE

Active
SPE4A6-26-T-17MPFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-17MP, is for the procurement of 41 straight headless pins, identified by NSN 5315-01-564-4971. The contract falls under NAICS code 332618 and requires delivery within 171 days after the order is received. The place of performance is located in Jacksonville, Florida. The agreement incorporates specific technical and quality standards, including DLA packaging requirements and guidelines for the removal of government identification from non-accepted supplies. Compliance is governed by the DLA Master List of Technical and Quality Requirements based on the solicitation or award date. Interested parties must respond by August 24, 2026, with Debra Fowler serving as the primary point of contact.

General Info

DoD seeks 41 straight headless pins for delivery in Jacksonville by August 2026.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332618 - Other Fabricated Wire Product ManufacturingView NAICS

Place of Performance

BLDG 175 SWAN ROAD, JACKSONVILLE, FL, 32212-0103, USA

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-17MP.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUSA
Contacts
Debra Fowler
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,STRAIGHT,HEADLE
PIN, STRAIGHT, HEADLESS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
ADEQUATE DATA FOR NSN/Part Number: 5315-01-564-4971 Quantity: 41 EA Purchase Request: 7017911972QTY: 41 Delivery: 171 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332618
New
DIBBS
PIN, LOCK
Solicitation # SPE4A6-26-T-18GU
This solicitation, issued by the Department of Defense ASC Commodities Division, is for the procurement of 2,053 lock pins under NSN 5315-01-465-2256. The contract is designated as a fully competitive acquisition based on military or federal specifications, with a delivery requirement of 171 days after the order is placed. Performance is centered at Tinker AFB, and the procurement falls under NAICS code 332618. The agreement incorporates several critical technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Additionally, the contract notes that covered defense information potentially applies. The solicitation was posted on August 16, 2026, with a response deadline of August 24, 2026.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADLESS
Solicitation # SPE4A5-26-T-363C
This contract is for the procurement of 202 units of straight, headless pins, identified by NSN 5315-01-284-5715 and Hamilton Sundstrand part number 953B468-1. The order is managed by the Department of Defense under solicitation SPE4A5-26-T-363C, with a delivery timeframe of 171 days and a required delivery date of July 27, 2027. Shipping is FOB Origin, with the final destination and inspection point located at the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for measuring and test equipment and configuration change management. Quality assurance will be conducted via zero-based sampling plans according to MIL-STD-1916 or ASQ H1331. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow RP001 requirements. Notably, Item Unique Identification is not required for this specific request.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-18NY
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-18NY, is for the procurement of 45 units of straight headed pins, identified by NSN 5315-99-500-4165. The contract requires delivery within 171 days after receipt of order, with the place of performance located in New Cumberland, Pennsylvania. The agreement is subject to specific DLA packaging requirements and technical quality standards as outlined in the DLA Master List. Additionally, the contract includes provision RQ011 regarding the removal of government identification from any non-accepted supplies. Interested parties must respond by the deadline of August 24, 2026, and can coordinate with the primary point of contact, Christina Pyle.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, GROOVED, HEADED
Solicitation # SPE4A6-26-T-17MU
This contract is for the procurement of 139 units of grooved headed pins, identified by NSN 5315016057499. The item is classified as a commercial product with associated part numbers from BAE Systems Land and Armaments and McMaster-Carr Supply Co. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final delivery date of April 9, 2027. The shipment is designated as FOB Origin with inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA technical and quality requirements, including specific packaging standards under MIL-STD-2073-1E and marking guidelines per MIL-STD-129. Sampling must follow MIL-STD-1916 or ASQ H1331, emphasizing a zero-based sampling plan for acceptance. All deliverables are to be shipped to the DLA Distribution DDSP New Cumberland facility in Pennsylvania.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIRE
Solicitation # SPE4A5-26-T-362J
This contract is for the procurement of 11 rolls of wire rope, identified by NSN 4010-01-215-2603 and conforming to specification MIL-DTL-83420/4F. The items are designated as critical application items and must adhere to strict quality and technical requirements, including the use of Qualified Products Lists or Qualified Manufacturers Lists. The contract mandates a CMMC Level 2 self-assessment and prohibits the intentional addition of mercury or mercury-containing compounds to the hardware. Delivery is required within 171 days, with a required delivery date of December 30, 2026, and a need ship date of February 12, 2027. The shipment is FOB Origin and will be delivered to DLA Distribution San Joaquin in Tracy, California. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements, while sampling and inspection will be conducted at the destination according to MIL-STD-1916 or ASQ H1331.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
WIRE ROPE ASSEMBLY,
Solicitation # SPE4A5-26-T-367G
This contract is for the procurement of 12 single leg wire rope assemblies, identified by NSN 4010015959884 and part number EW54061. The order is managed under solicitation SPE4A5-26-T-367G with a required delivery date of January 4, 2027, and a delivery window of 171 days. Shipping is FOB Origin, with the final destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The supplier must adhere to strict quality and packaging standards, including ASTM D3951 and MIL-STD-129, while following DLA packaging requirements for procurement. Quality assurance will be conducted via destination inspection and acceptance using sampling methods based on MIL-STD-1916 or ASQ H1331. Additionally, the contract requires compliance with CMMC Level 2 self-assessment and the protection of covered defense information.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-975J
This solicitation from the Department of Defense Land Supply Chain is for the procurement of 209 O-rings under National Stock Number 5331-01-342-0112. The contract requires delivery within 5 days after receipt of order and specifies that all supplied items must be completely free of asbestos. The agreement is governed by technical and quality requirements outlined in the DLA Master List, including specific packaging standards and regulations regarding the removal of government identification from non-accepted supplies. The place of performance is located in Corpus Christi, Texas, and the solicitation is identified by number SPE7L1-26-T-975J.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
O-RING
Solicitation # SPE7L1-26-T-976N
This solicitation, issued by the Department of Defense Land Supply Chain, is for the procurement of 273 O-rings under part number 5331-01-078-5127. The contract requires delivery within 168 days after the order is placed and specifies that the place of performance is Robins Air Force Base. The supplier must adhere to DLA packaging requirements and ensure all items are free of asbestos. Compliance with technical and quality requirements is mandatory as outlined in the DLA Master List, and any government identification must be removed from non-accepted supplies. The response deadline for this solicitation is August 27, 2026.
LAND SUPPLY CHAIN

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
LINK, DETACHABLE
Solicitation # SPE4A5-26-T-358P
This solicitation, issued by the Department of Defense ASC Supplier Oper OEM Division, is for the procurement of eight detachable links under NSN 4010-00-106-9459. The contract requires delivery within 171 days after the order is placed. Performance is centered in New Cumberland, Pennsylvania, and the procurement falls under NAICS code 332618. The contract is subject to several strict technical and quality requirements, including specific DLA packaging standards, measuring and test equipment protocols, and the removal of government identification from non-accepted supplies. Notably, the item contains technical data subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization from the Department of State or Commerce. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DLA export-control training.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
FIBER ROPE ASSEMBLY
Solicitation # SPE8EE-26-T-2337
This solicitation, issued by the Department of Defense under the Defense Logistics Agency, is for the procurement of two single leg fiber rope assemblies, identified by NSN 4020-01-647-7020. The contract requires delivery within 20 days after order and is managed under NAICS code 332618. Performance is designated for Virginia Beach, and the response deadline is August 27, 2026. Compliance requirements are stringent, including CMMC Level 2 certification for third-party assessment and adherence to DLA master lists for technical and quality requirements. The contract is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Additionally, contractors must comply with DLA packaging requirements, the US/Canada Joint Certification Program, and specific protocols for the removal of government identification from non-accepted supplies.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332618
New
DIBBS
ROPE, WIRE
Solicitation # SPE4A5-26-T-362W
This contract is a solicitation for the procurement of 12 units of wire rope, identified by NSN 4010-01-204-4876. The item is designated as a critical application item with associated part numbers from Oshkosh Defense LLC and Grove U.S. LLC. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of March 27, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. Compliance requires adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan unless otherwise specified. The contract emphasizes that the DLA Master List of Technical and Quality Requirements takes precedence over other packaging standards. Inspection and acceptance will occur at the destination.
ASC SUPPLIER OPER OEM DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332618
New
DIBBS
PIN, STRAIGHT, HEADED
Solicitation # SPE4A6-26-T-18KP
This contract is for the procurement of 24 units of straight headed pins, identified by NSN 5315015486613 and part number MS20392-2S83. The items must adhere to the technical specifications of NASM20392 Revision 01 and are designated as critical application items. Delivery is required within 171 days, with a required delivery date of December 22, 2026, and a need ship date of February 12, 2027. The shipment is to be delivered FOB Origin to DLA Distribution San Diego. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the origin. Packaging must follow ASTM D3951 and MIL-STD-129, while palletization must align with DLA packaging requirements RP001. The contract incorporates various technical and quality requirements from the DLA Master List, including specific mandates for bare item marking and the removal of government identification from non-accepted supplies.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 336413
New
DIBBS
CONTROL, ALARM
Solicitation # SPE4A6-26-T-17PV
This contract is for the procurement of alarm control units, identified as commercial off the shelf critical application items from Eldec Aerospace Corp under part number 1-899-15 and NSN 6340001150701. The total quantity requested is 58 units, split between two line items of 16 and 42 units. Delivery is required within 171 days after order, with a need ship date of February 12, 2027, and an original required delivery date of October 26, 2028. The agreement specifies FOB Origin shipping with inspection and acceptance occurring at the destination. Shipments are directed to DLA Distribution Depot Hill in Utah and DLA Distribution Warner Robins in Georgia. Compliance requirements include CMMC Level 2 self assessment, adherence to MIL-STD-129 for marking, and specific DLA packaging and palletization standards. This is a total small business set-aside under NAICS code 336413.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332510
New
DIBBS
STUD, TURNLOCK FASTENER
Solicitation # SPE4A6-26-T-17SX
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-17SX, is for the procurement of 416 turnlock fastener studs. The item is identified as a commercial product with part number 98264-4-410 and national stock number 5325-00-687-5193, manufactured by Monadnock Co. The place of performance is designated as Tinker AFB. The contract requires adherence to DLA packaging requirements and specific technical and quality standards as outlined in the DLA Master List. Delivery is required within 171 days after the order is received. Interested parties must respond by the deadline of August 24, 2026, and can contact Tyler Greene for further information.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 334419
New
DIBBS
CABLE ASSEMBLY, SPECIAL
Solicitation # SPE4A6-26-T-18ND
This contract is a solicitation for the procurement of 228 special purpose electrical cable assemblies, identified by NSN 5995-01-599-3052. The requirement is designated as a critical application item and is set aside for Service-Disabled Veteran-Owned Small Businesses. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of July 25, 2027. The items are to be delivered FOB Origin to the DLA Distribution Red River facility in Texarkana, Texas. The contract mandates strict adherence to several technical and quality standards, including MIL-STD-129 for marking and MIL-STD-2073-1E for packaging. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-nonconformance requirement for acceptance. Additionally, the provider must comply with Cybersecurity Maturity Model Certification CMMC Level 2 self-assessment and various DLA master list technical requirements. Configuration change management and source approval request documentation are also required.
Other Electronic Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332721
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-17QU
This contract is a solicitation for the procurement of 268 machine bolts under NSN 5306-00-182-1855. The items are designated as critical application hardware and must adhere to specific technical standards, including NASM3 through NASM20 and NASM6812. Quality assurance requires dimensional conformance for Class 3A and 3B threads per FED-STD-H28/20 and sampling conducted according to MIL-STD-1916 or ASQ H1331. Physical identification and marking must comply with MIL-STD-130N, and the material has no shelf life requirement. The delivery is set for 171 days after order, with a required delivery date of May 28, 2027, shipping FOB Origin to DLA Distribution Cherry Point in North Carolina. Packaging must follow ASTM D3951 and MIL-STD-129, with palletization adhering to DLA packaging requirements. This is a total small business set-aside under NAICS code 332721, managed by the Department of Defense ASC Commodities Division.
Precision Turned Product Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-18ME
This contract is for the procurement of 206 shear bolts, identified by NSN 5306015838163 and part number MS14181-03024. The items are classified as critical application items and must adhere to the technical specifications of NASM14181 Revision 9. Delivery is required within 171 days, with a need ship date of February 12, 2027, and a final required delivery date of June 23, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement incorporates several DLA technical and quality requirements, including specific packaging standards under RP001 and MIL-STD-2073-1E, and marking requirements per MIL-STD-129. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. Inspection and acceptance will take place at the destination. The contract allows for no quantity variance, meaning exactly 206 units must be supplied.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, PLAIN, HEXAGON
Solicitation # SPE4A6-26-T-17LH
This contract is for the procurement of plain hexagon nuts, specifically part number MS51968-23 with thread class 2B, conforming to specifications FF-N-836 and MS51968. The order consists of 118 packages, with each package containing 5 units. The items are classified as commercial products and are designated as critical application items. Manufacturing must adhere to the current revision of the applicable part standards, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to the hardware or packaging. The agreement specifies a delivery timeframe of 171 days, with a required delivery date of March 28, 2027, shipping FOB Origin to the DLA Distribution New Cumberland facility. Quality assurance will be managed through destination inspection and acceptance, utilizing sampling methods such as MIL-STD-1916 or ASQ H1331. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. Additional quality and technical mandates are incorporated via the DLA Master List, including specific requirements for bare item marking and the removal of government identification from non-accepted supplies.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
WASHER, FLAT
Solicitation # SPE4A6-26-T-17BB
This solicitation, issued by the Department of Defense ASC Commodities Division under solicitation number SPE4A6-26-T-17BB, is for the procurement of 102 flat washers identified by NSN 5310-00-801-6723. The contract requires delivery within 221 days after order and is categorized under NAICS code 332722. Performance is located in New Cumberland, Pennsylvania, and the primary point of contact is Sibel Claywell. The contract is subject to strict technical and quality requirements, including DLA packaging standards, physical item marking, and the removal of government identification from non-accepted supplies. Notably, the technical data is subject to export controls under ITAR or EAR regulations, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed DOD export-control training.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 213113
New
DIBBS
BEARING, BALL, ROD EN
Solicitation # SPE4A6-26-T-18KS
This contract is for the procurement of three ball rod end bearings, identified by NSN 3110-01-529-2501 and part number MSSKE6DSC. The items are designated as critical application components and must adhere to specific technical and quality requirements, including configuration control and precise thread gaging per SAE AS8879 or MIL-S-7742. Delivery is required within 171 days, with inspection and acceptance occurring at the origin. A significant requirement of this solicitation is the domestic sourcing restriction, which mandates that the bearings be manufactured in the United States, its outlying areas, or Canada. Additionally, at least 50 percent of the total cost of the bearing components must be from these regions. Contractors must provide a formal declaration regarding the domestic or foreign nature of the materials to be considered for the award. Packaging and marking must comply with MIL-STD-129, MIL-STD-2073-1E, and MIL-DTL-197M.
Support Activities for Coal Mining

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
NUT, SELF-LOCKING, HEXAG
Solicitation # SPE4A6-26-T-17LV
This solicitation is for the procurement of 267 self-locking hexagon nuts under contract number SPE4A6-26-T-17LV for the Department of Defense ASC Commodities Division. The items must be manufactured according to current military or consensus non-government part standards, with a delivery requirement of 171 days after receipt of order. Performance is based in Jacksonville, Florida, and the procurement is conducted as fully competitive. The contract mandates strict adherence to DLA technical and quality requirements, including specific packaging, bare item marking, and the removal of government identification from non-accepted supplies. Quality assurance involves inspection and acceptance at origin using zero-based sampling plans such as MIL-STD-1916 or ASQ H1331. Additionally, the contract prohibits the intentional addition of mercury or mercury-containing compounds unless specifically exempted for functional purposes.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332991
New
DIBBS
BUSHING, SLEEVE
Solicitation # SPE4A6-26-T-17ZP
This contract is for the procurement of 34 sleeve bushings, identified by NSN 3120-01-168-4477 and part number AM2667-2-5. The items are designated as critical application items and must be manufactured according to TDP Rev A Gen 1 and QAP 13873. Because the manufacturing process may require specific casting or forging tooling that the government does not possess, suppliers are advised to coordinate with DLA Aviation or Land and Maritime Supply Chains for tooling and material assistance. The agreement mandates strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-2073-1E packaging data. Quality assurance is governed by zero-based sampling plans per MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Delivery is set for 171 days after the order, with a required delivery date of June 14, 2027, shipping to the DLA Distribution Depot Oklahoma at Tinker AFB.
Ball and Roller Bearing Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A6-26-T-17YR
This contract is for the procurement of 4,428 shear bolts, identified by NSN 5306-01-130-8993 and part number NAS6604-5. The items are classified as critical application hardware and must be manufactured according to the current revisions of NAS6603 through NAS6620 and NAS4002. Delivery is required within 171 days, with a need date of February 12, 2027, shipping FOB Origin to the DLA Distribution Depot at Tinker AFB, Oklahoma. Quality assurance requires dimensional conformance for Class 3A and 3B threads per FED-STD-H28/20 and sampling in accordance with MIL-STD-1916 or ASQ H1331. Strict adherence to DLA packaging requirements, MIL-STD-129 marking, and MIL-STD-130N identification is mandatory. Inspection and acceptance will take place at the destination, and the contract specifies a zero percent quantity variance.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336320
New
DIBBS
LOUVER, LIGHT
Solicitation # SPE4A6-26-T-18GY
This contract is for the procurement of 1,100 light louvers under solicitation SPE4A6-26-T-18GY, identified by NSN 6210-01-479-4595. The requirement is a total small business set-aside for the Department of Defense, ASC Commodities Division. Delivery is required within 171 days, with an original required delivery date of November 29, 2026, and a need ship date of February 12, 2027. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA Master List technical and quality requirements, including specific packaging standards such as ASTM D3951 and MIL-STD-129, and palletization per RP001. Quality assurance and sampling must follow MIL-STD-1916 or ASQ H1331, with a zero-based sampling plan unless otherwise specified. The item is designated as a critical application item, with associated part numbers from Therma-Tech Engineering Inc and Oshkosh Defense LLC. Inspection and acceptance will occur at the destination.
Motor Vehicle Electrical and Electronic Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 8 days
View Details