This Solicitation opportunity from Department Of Defense was posted on May 15, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PIN, STRAIGHT, HEADLE

Closed

SPE4A6-26-T-49D1Federal

Submission Closed05/20/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332510

New

DIBBS

PIN, QUICK RELEASEThe contract involves the procurement of five units of a quick release pin identified by the National Stock Number 5315-00-883-2968. This solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 15, 2026, with a response deadline of June 23, 2026. The contract type is a solicitation, and there is no specified set-aside or NAICS code associated with it. The contract details indicate a federal organization as the issuer, but specific location information for both the office address and place of performance is not provided. While there is no contact information listed, further details and access to the solicitation can be obtained through the Defense Logistics Agency’s bidding platform. This contract seeks to fulfill a straightforward acquisition for the Department of Defense’s supply requirements.

Defense Logistics Agency

POSTED

DEADLINE

NUTThe contract pertains to the procurement of 14 units of a item identified as "NUT" with NSN/Part Number 5310-01-248-1076. The solicitation, numbered SPE4A6-26-T-92S3, was posted by the Defense Logistics Agency under the Department of Defense on June 15, 2026. Interested parties were required to respond by June 23, 2026. This procurement is categorized as a solicitation and does not specify any set-aside type or NAICS code. The contract is managed by a federal organization, with performance details and specific office location information not disclosed. The solicitation can be accessed through the Defense Logistics Agency's bid board system.

Defense Logistics Agency

POSTED

DEADLINE

CHAIN, WELDLESSThe contract involves the procurement of 370 units of weldless chains identified by NSN/Part Number 4010-00-042-7913. It is a solicitation issued by the Defense Logistics Agency under the Department of Defense with the solicitation number SPE4A5-26-T-239P. The solicitation was posted on June 15, 2026, and the deadline for response is June 23, 2026. The contract does not specify any set-aside type or particular small business category restrictions and lacks details on the NAICS code. The place of performance and specific office address details were not provided. Interested parties can access additional information and submit their responses through the Defense Logistics Agency’s bidding system website.

Defense Logistics Agency

POSTED

DEADLINE

LEAF, BUTT HINGEThe contract pertains to the procurement of a leaf butt hinge with the National Stock Number 5340-00-192-4090. A total quantity of five units has been requested under purchase request number 7016088362. This solicitation, identified by the number SPE7L1-26-T-706R, was issued by the Defense Logistics Agency, which operates under the Department of Defense. The solicitation was posted on June 15, 2026, and the deadline for responses is June 26, 2026. The contract is categorized as a federal solicitation with no specific set-aside type indicated. The place of performance and detailed office address information are not provided. The solicitation is accessible through the Defense Logistics Agency's procurement platform, ensuring that vendors can review and submit their responses within the specified timeframe. This contract reflects routine acquisition activity to support DoD operational requirements.

Defense Logistics Agency

POSTED

DEADLINE

CLAMP, LOOPThe contract pertains to the procurement of 20 units of a product identified as "CLAMP, LOOP" with the National Stock Number 5340-01-721-0178. The solicitation, numbered SPE7L1-26-T-707D, was posted on June 15, 2026, with a response deadline set for June 26, 2026. This solicitation was issued by the Defense Logistics Agency, a component of the Department of Defense, and is classified as a federal acquisition. While specific details such as set-aside status, NAICS code, and exact performance location are not provided, the contract is intended to support federal government operations. The official solicitation and submission processes are managed through the specified online procurement portal. This contract facilitates the timely acquisition of essential hardware components within established federal procurement guidelines.

Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 10 days

AI Contract Overview

This contract pertains to the procurement of 23 units of a straight, headless pin identified by NSN 5315-01-499-8144 and part number 1G04447H02. The contract number is SPE4A6-26-T-49D1, issued by the Department of Defense's ASC Commodities Division, with delivery required to the DLA Distribution facility in New Cumberland, PA. The delivery schedule specifies 156 days from the award with a firm delivery date of October 19, 2026. Inspection and acceptance will occur at the destination, with packaging, markings, and palletization adhering to military standards including MIL-STD-129 and MIL-STD-2073-1E alongside specific DLA quality and packaging requirements such as RP001. Quality assurance provisions incorporate sampling protocols in alignment with MIL-STD-1916 or ASQ H1331, ensuring strict verification of critical, major, and minor attributes at defined acceptance quality levels. Configuration and change management will follow established engineering change proposal and variance procedures. The contract outlines no quantity variance allowance and mandates removal of governmental identification from non-accepted supplies. Contact for contract administration is provided, facilitating streamlined communication and compliance. The procurement is conducted under NAICS code 332510 and managed through DLA’s eProcurement platform, supporting DoD acquisition regulations for simplified and large-scale procurements.

General Info

Procurement of 23 headless pins, delivery by October 19, 2026, with strict military packaging and quality standards.

Agency

Department Of Defense → ASC COMMODITIES DIVISION

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-49D1 for DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 15

Solicitation

Response DeadlineMay 20

Deadline has passed

Submission Closed

05/20/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC COMMODITIES DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC COMMODITIES DIVISION

Office AddressUS

Contacts

Samantha Hopkins

contact@example.gov

+1 (555) 000-0000

Full Description

PIN,STRAIGHT,HEADLE
PIN,STRAIGHT,HEADLESS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
UNITED TITANIUM, LLC 1F103 P/N 1G04447H02
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016707236 0001 EA 23.000
NSN/MATERIAL:5315014998144
DELIVERY (IN DAYS):0156
SPE4A6-26-T-49D1
SECTION B
PR: 7016707236 PRLI: 0001 CONT’D
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:O
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:10/19/2026 Original Required Delivery Date:10/19/2026
SPE4A6-26-T-49D1 NSN/Part Number: 5315-01-499-8144 Quantity: 23 EA Purchase Request: 7016707236QTY: 23 Delivery: 156 days ADO