Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN, STRAIGHT, HEADLESS

Active
SPE4A6-26-T-10FXFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of two straight headless pins, identified by NSN 5315-00-177-0820, under solicitation SPE4A6-26-T-10FX, with a response deadline of August 6, 2026, and a required delivery within 20 days after order. The item is being sourced as fully competitive under a military or federal specification, and item unique identification is not required, as specified by DFARS 252.211-7003(c)(1)(i). Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger acquisitions unless an amendment supersedes it. Packaging must comply with DLA requirements, government identifiers must be removed from non-accepted supplies, and bare items must be physically marked as per RQ017. Covered defense information may apply, and all performance is directed under the Department of Defense, specifically the ASC Commodities Division, with Sarah Henderson as the point of contact.

General Info

Procure two straight headless pins per NSN 5315-00-177-0820, deliver within 20 days, competitive military specification, no UID required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
SARAH HENDERSON
contact@example.gov

Full Description

Show more
PIN,STRAIGHT,HEADLESS
PIN, STRAIGHT, HEADLESS
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE NSN/Part Number: 5315-00-177-0820 Quantity: 2 EA Purchase Request: 7017671489QTY: 2 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332510
New
DIBBS
PIN-RIVET
Solicitation # SPE4A6-26-T-10GC
The contract pertains to the procurement of PIN-RIVET items with the NSN 5320-00-971-9153, requiring a total quantity of 178 units to be delivered within 42 days of contract award. All items must comply with stringent sampling requirements mandating adherence to MIL-STD-1916 or ASQ H1331 Table 1, with zero non-conformances accepted unless otherwise stated, and critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. Packaging must conform to ASTM D3951 unless overridden by DLA Master List requirements, with all packaging and labeling strictly following MIL-STD-129, including palletization per RP001. Items must be marked with government identification as specified, and any non-accepted supplies must have government identifiers removed. The delivery is FOB origin, inspection and acceptance occur at destination, with no variance allowed in quantity. The specified shipping address is the DLA Distribution San Joaquin facility in Tracy, CA, and transportation follows DLAD Proc Notes C19 and C20. The contract is issued under solicitation SPE4A6-26-T-10GC with a required delivery date of April 25, 2026, and unit price of $178.00 per EA for a total contract value of $31,684. All technical and quality requirements referenced by R or I numbers are sourced from the DLA Master List of Technical and Quality Requirements, with revisions controlled by solicitation or amendment dates.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLIP, SPRING TENSION
Solicitation # SPE7L1-26-T-890C
Offerors must comply with strict domestic sourcing requirements under the Berry Amendment and Buy American Act, with thresholds lowered to $150,000, and must disclose any non-domestic materials in their quotations. The solicitation prohibits the use of covered telecommunications equipment or services as defined by FAR 52.204-24 and DFARS 252.204-7016, and no items produced via additive manufacturing may be submitted unless prior approval is granted. Quotations must include quantity ranges due to fluctuating demand, as manual evaluation allows for flexible requirement aggregation or reduction without resolicitation, though this does not apply to Auto IDC. Small business joint ventures must submit specific certifications under FAR provisions for eligibility categories. All vendors must register through the upcoming AMPS system to access the Vendor Shipment Module and maintain shipping capability, with WebServices users required to update their schema by specified deadlines. Offerors anticipating submission after the closing date must file a “No Bid” on DIBBS with an anticipated quote date or reason to avoid unnecessary follow-ups. Fast Pay is not applicable to this solicitation. The item in question is a spring tension clip with NSN 5340-01-192-2048, quantity 15 units, requiring delivery within 57 days to Tinker AFB, with Robert Warne as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE4A6-26-T-10GR
The contract solicitation SPE4A6-26-T-10GR requires four straight headless pins with NSN 5315-01-400-3809 for delivery within 128 days to Tracy, CA, under the Department of Defense’s Defense Logistics Agency. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date for simplified acquisitions or the RFP issue date for larger ones, unless an amendment supersedes it. The items must comply with stringent packaging, marking, and identification standards including the removal of government identification from non-accepted supplies and bare item marking per RQ017. Sampling must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances unless otherwise stated, and attributes are assigned verification levels or AQLs based on classification, with unspecified attributes treated as major. Configuration changes require formal engineering change proposals or variance requests, and manufacturers must submit source approval documentation per RC001. The technical data associated with this item is subject to export control under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Only contractors with approved US/Canada Joint Certification Program status, completion of DOD export-controlled data training, and DLA authorization may access the technical data. Cybersecurity requirements mandate CMMC Level 2 compliance through either a self-assessment or third-party assessment by a certified C3PAO, and covered defense information handling is mandatory. All documentation, inspection, and acceptance activities must occur at the manufacturer’s facility per RQ009, and the procurement falls under NAICS 332510 for metal stamping and forging. Primary point of contact is Christopher Montgomery of the ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
DISK, SOLID, PLAIN
Solicitation # SPE7L1-26-T-890T
The contract is for the procurement of 4,728 solid plain disks with NSN 5340-01-229-3826 under solicitation SPE7L1-26-T-890T, issued by the Department of Defense’s Land Supply Chain through the Defense Logistics Agency. Delivery is required within 182 days after contract award, with responses due by August 10, 2026. The item falls under NAICS code 332510 and is subject to DLA packaging and technical quality requirements referenced in the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. The supply must comply with strict prohibitions against intentional addition or direct contact of mercury or mercury-containing compounds, except for specific functional uses such as batteries, fluorescent lamps, instruments, sensors, controls, weapon systems, or NAVSEA-specified reagents; portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment barrier per NAVSEA 5100-003D. Additionally, the technical data associated with this item is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons without prior authorization from the Department of State or Commerce. Access to this controlled data is limited to contractors with valid US/Canada Joint Certification Program certification, completed DOD export training, approved DLA questionnaire responses, and formal DLA authorization. The place of performance is New Cumberland, Pennsylvania, with Brandon Pesicek as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
LEVER, MANUAL CONTRO
Solicitation # SPE7L1-26-T-888R
This contract pertains to the procurement of one manual control lever, identified by NSN 5340-01-082-4079 and part number 142D5220, under solicitation SPE7L1-26-T-888R. The item must be delivered within 20 days to the destination specified as APO AP 96264-2025, with FOB destination terms, zero tolerance for quantity variance, and final inspection and acceptance occurring at the delivery point. All packaging and marking must comply with MIL-STD-2073-1E and MIL-STD-129, using approved materials and procedures, and no special marking is required. The contract strictly prohibits the use or incorporation of Class I ozone-depleting chemicals, superseding any conflicting specification requirements, and requires prior approval for any substitute chemicals. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision determined by the solicitation or award date depending on acquisition size. The item is subject to Covered Defense Information provisions and must adhere to DLA packaging and transportation guidelines, including references to DLAD Proc Notes C19 and C20 for shipping logistics. The supply is designated for the Department of Defense through the Land Supply Chain, with delivery directed to Kunsan Air Base in South Korea for receipt, and the contracting officer is Kristina Derry. The unit of issue is each (EA), with a total price based on a unit price of one dollar. The procurement falls under NAICS code 332510 and is classified as a federal solicitation with no set-aside designation. The response deadline is August 10, 2026, and the original required delivery date is July 27, 2026. Government-specific identifiers and distribution codes are provided for internal tracking, and all submissions must conform to the DoD unit of issue standards as outlined in the official DLA reference. The contract mandates strict adherence to technical compliance, environmental restrictions, and logistics protocols throughout the fulfillment process.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PLUNGER, QUICK RELEA
Solicitation # SPE7L1-26-T-889F
The contract solicitation pertains to the procurement of 28 units of a PLUNGER, QUICK RELEA with NSN 5340-00-565-3198 under solicitation number SPE7L1-26-T-889F. The item is subject to strict export control regulations due to the presence of technical data governed by either ITAR or EAR, requiring prior authorization from the Department of State or Department of Commerce for any export or disclosure to foreign persons, including foreign nationals within the United States. Access to this controlled data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DOD training on handling export-controlled technical data and have been formally approved by the Defense Logistics Agency. The delivery timeline is set for 20 days after award, and the solicitation, issued by the Department of Defense’s Land Supply Chain under NAICS code 332510, has a response deadline of August 10, 2026. Only vendors meeting all specified compliance and certification criteria may submit proposals, with point of contact Kristina Derry available for inquiries via provided email and phone.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, MOUNTING
Solicitation # SPE7L2-26-T-0580
The contract pertains to the procurement of a mounting bracket identified by NSN 5340-01-727-9919 and part number 17211019, with a quantity of eight units required under purchase request 7017439142. The deliverable must be shipped FOB origin with a delivery timeline of 147 days, arriving at the designated DLA distribution facility in New Cumberland, Pennsylvania, and is subject to zero variance in quantity. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s master technical and quality requirements, including MIL-STD-129 for marking and labeling, and either ASTM D3951 for non-hazardous materials or FED-STD-313’s IP025 if classified as hazardous, with DLA requirements taking precedence over ASTM. Palletization must adhere to DLA packaging standards, and the unit of issue is each, priced at $8.00 per unit for a total contract value of $64.00. The solicitation number is SPE7L2-26-T-0580, issued under NAICS code 332510, with a response deadline of August 10, 2026, and a need ship date of January 5, 2027, while the original required delivery date is March 29, 2027. Technical compliance and quality controls are governed by the DLA Master List of Technical and Quality Requirements as referenced and enforced under the procurement term.
LAND SUPPLIER OPNS WHEELED VEHICLES

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
BUMPER
Solicitation # SPE7L1-26-T-889A
The contract pertains to the procurement of a single bumper identified by NSN 5340-01-663-1092 under solicitation SPE7L1-26-T-889A, with a required delivery within 20 days after ordering. The procurement is subject to full and open competition and incorporates technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA requirements, and any non-accepted supplies must have government identification removed prior to return. Configuration changes require formal engineering change proposals and variance requests, while export control regulations governing ITAR or EAR apply to associated technical data, which may not be disclosed to foreign persons without authorization. Access to such controlled data is restricted to contractors holding approved US/Canada Joint Certification Program status, having completed mandatory DOD export control training, and obtaining DLA approval. The purchase is managed by the Department of Defense’s Land Supply Chain under NAICS code 332510, with performance directed to Huntsville, Alabama, and all inquiries should be directed to Kristina Derry at the provided contact information.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
PIN, STRAIGHT, HEADLE
Solicitation # SPE7M4-26-T-290V
The contract pertains to the procurement of a pin, straight, headless item with NSN 5315-01-164-5823 and part number 19221-1, supplied by EATON AEROSPACE LLC, under solicitation SPE7M4-26-T-290V. One unit is required to be delivered within 20 days FOB origin, with no tolerance for quantity variance. All deliveries must be made to the specified military receiving location at Fort Irwin, California, using the fastest traceable shipping method—parcel post is prohibited. Packaging must comply with ASTM D3951, while marking and labeling are governed by MIL-STD-129 and the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. The item is classified as a critical application product and must be marked in accordance with MIL-STD-130N. The use of Class I ozone-depleting chemicals is strictly forbidden, and any substitute chemicals require prior approval unless explicitly permitted by the specification. The unit of issue is each, and palletization must adhere to DLA’s packaging requirements. Delivery is due by July 27, 2026, and all government-specific identifiers and codes, including the RDD, DODAAC, and procurement request numbers, must be accurately applied to the shipment for proper tracking and receipt.
FLUID HANDLING DIVISION

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
COVER, ACCESS
Solicitation # SPE7L1-26-T-890Q
The contract pertains to the procurement of 8 units of COVER, ACCESS with NSN 5340-12-369-0960 under solicitation SPE7L1-26-T-890Q, issued by the Department of Defense’s Land Supply Chain. Delivery is required within 110 days after award, and responses must be submitted by August 10, 2026. This is classified as a commercial item procurement and is subject to the DLA Master List of Technical and Quality Requirements, which incorporates all referenced technical and quality standards identified by R or I numbers. Sampling procedures must comply with MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major unless otherwise dictated by governing documents. MIL-STD-105/ASQ Z1.4 may be used for determining sample size but requires zero non-conformances unless the contract states otherwise. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with supplied hardware, except in specific applications such as batteries, fluorescent lights, sensors, weapon systems, and authorized chemical reagents, where two layers of containment are required for portable devices. All items must be marked in accordance with MIL-STD-130N, and the place of performance is specified as Texarkana, TX, with Geoffrey Feicht designated as the primary point of contact.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
SEAT, BALL SOCKET
Solicitation # SPE7L1-26-Q-1391
The contract is for the procurement of 124 units of a seat, ball socket with NSN 5340-00-361-3510 under solicitation SPE7L1-26-Q-1391, which is a total small business set-aside as defined by FAR 19.5. The solicitation was posted on July 29, 2026, with responses due by August 14, 2026, and delivery is required within 404 days of award. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with DLA requirements, and all government identification must be removed from non-accepted supplies. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitutions must be submitted for approval unless explicitly authorized by the specifications. The item involves technical data subject to export control under ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal DLA authorization. Performance is to be delivered to New Cumberland, Pennsylvania, with the primary point of contact being Brandon Pesicek of the Department of Defense, Land Supply Chain, and the NAICS code is 332510 for forging and stamping.
LAND SUPPLY CHAIN

POSTED

about 15 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
PLUG, MACHINE THREAD
Solicitation # SPE4A7-26-T-599Q
This contract is for the procurement of 14 units of a PLUG, MACHINE THREAD with NSN/Part Number 5365-01-490-0332, under solicitation SPE4A7-26-T-599Q, with a response deadline of August 6, 2026, and delivery expected 171 days after award. The item is subject to strict export control regulations under either ITAR or EAR, meaning any transfer, including disclosure to foreign persons within or outside the United States, requires prior authorization from the Department of State or Department of Commerce. Technical data associated with this item is governed by DFARS 252.225-7048, and only DLA contractors with an approved US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and the DLA Export-Controlled Technical Data Questionnaire, are permitted access. The placing organization is the Department of Defense under the ASC SUPPLIER OPER AE AND AF DIV, with performance location in New Cumberland, Pennsylvania, and primary point of contact Brandon Smith at brandon.1.smith@dla.mil.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 15 hours ago

DEADLINE

in 7 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 484220
New
DIBBS
Domestic Logistics & Delivery CoordinationThe contract requires coordinated execution of final delivery for cable assemblies to multiple domestic military stock locations, with strict adherence to packaging verification standards and shipping instruction compliance. All activities must ensure that cable assemblies are handled, packaged, and transported according to military requirements to guarantee readiness and operational suitability upon arrival at designated depots across CONUS. The solicitation is a small business set-aside under the SBA program, exclusively open to total small businesses as defined by FAR 19.5, with the NAICS code 484220 classifying it under truck transportation of specialized freight. The contract is managed by the ASC Commodities Division under the Department of Defense and is issued as a subcontract. Proposals must be submitted by the deadline of August 11, 2026, with no specified point of contact or place of performance details provided beyond the domestic scope. All work must align with DLA’s logistical and compliance frameworks to support military supply chain integrity.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541330
New
DIBBS
Supply Chain Compliance & Documentation ManagementThe contract titled Supply Chain Compliance & Documentation Management is a small business set-aside subcontract under the NAICS code 541330, issued by the ASC Commodities Division of the Department of Defense. It requires comprehensive documentation and compliance support specifically tailored to defense supply chain regulations, with a focus on tracking the phase-out of non-compliant materials, maintaining detailed traceability records, and accurately processing shipping instructions. The work is critical to ensuring adherence to federal defense standards and maintaining the integrity of the supply chain from origin to delivery. Response submissions are due by August 11, 2026, with the solicitation posted on July 29, 2026, and full performance will be conducted within the Department of Defense’s operational framework. Only small businesses qualified under the SBA’s Total Small Business Set-Aside provisions are eligible to respond, reinforcing the government’s commitment to supporting small business participation in defense-related contracts.
Engineering Services

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
Special-Purpose Electrical Cable Assembly ManufacturingThe contract calls for the manufacture and delivery of 300 units of a special-purpose electrical cable assembly identified by NSN 6150-01-347-8428, with strict adherence to International Traffic in Arms Regulations and Export Administration Regulations, requiring full compliance with ITAR and EAR requirements. Every unit must include comprehensive traceability throughout the production process and meet all mandated packaging standards to ensure secure handling and transport. The solicitation is structured as a subcontract with a total small business set-aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5. It falls under NAICS code 335931 for Other Electrical Equipment and Component Manufacturing and is issued by the ASC Commodities Division under the Department of Defense. Responses are due by August 11, 2026, with the opportunity posted on July 29, 2026, and all work must be performed in accordance with defense-grade protocols for quality, security, and documentation.
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541618
New
DIBBS
Supply Chain Documentation & Traceability ManagementThe contract requires the creation and ongoing maintenance of comprehensive traceability documentation for all manufactured items, ensuring full accountability from raw material sourcing through production to final inspection. This includes securing and organizing material certifications, detailed process records, and inspection data to meet rigorous audit and government inspection requirements at the origin point. The documentation must be accurate, complete, and readily accessible to support compliance with defense standards and regulatory obligations. This subcontract, issued under the Department of Defense’s ASC Commodities Division, falls under NAICS code 541618 and is focused on supply chain documentation and traceability management. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026. Performance is expected to occur at the contractor’s facility or designated manufacturing site, though specific location details are not provided. There is no set-aside classification indicated, and the work is critical to maintaining defense supply chain integrity through transparent, auditable records.
Other Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity Compliance & CMMC Level 2 ImplementationThe contract requires the implementation and ongoing maintenance of CMMC Level 2 compliance across all IT systems involved in manufacturing, documentation, and shipment processes, ensuring alignment with NIST SP 800-171 security controls. This includes establishing, documenting, and enforcing policies and procedures to protect controlled unclassified information, conducting regular assessments to validate control effectiveness, and maintaining readiness for third-party CMMC audits. The scope also mandates immediate cyber incident reporting in accordance with federal requirements, with defined workflows for detection, response, containment, and reporting to appropriate authorities. The contract is structured as a subcontract under the Department of Defense’s ASC Commodities Division and is linked to NAICS code 541512, indicating a focus on computer systems design services. It was posted on July 29, 2026, with a response deadline of August 11, 2026, and the place of performance is unspecified but tied to operational systems supporting manufacturing and logistics functions. Compliance is not a one-time effort but requires continuous monitoring, documentation updates, personnel training, and adaptation to evolving threats or regulatory changes to sustain CMMC Level 2 certification throughout the contract lifecycle.
Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
Packaging, Labeling, and Hazard Communication ComplianceThe contract requires the packaging of finished cable assemblies in strict accordance with MIL-STD-129, ensuring all assemblies are properly labeled, marked, and documented for military logistics and shipment. This includes the accurate application of hazard warning labels on all packages containing hazardous materials, with full compliance to the OSHA Hazard Communication Standard to ensure safety and regulatory adherence throughout handling and transport. The work is classified as a subcontract under NAICS code 561910, indicating it falls within support activities for truck transportation, though the nature of the work is focused on military-grade packaging and hazard labeling rather than transportation services. The solicitation was posted on July 29, 2026, with responses due by August 11, 2026, and is managed by the ASC Commodities Division within the Department of Defense, with performance expected to align with federal defense supply chain requirements.
Packaging and Labeling Services

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 423690
New
DIBBS
Source-Controlled Component SupplyThe contract entails the supply of source-approved electrical components specifically designated for use in the fabrication of cable assemblies, requiring full traceability from manufacturer to final assembly and comprehensive documentation to ensure compliance with all technical and regulatory standards. All components must meet stringent source control requirements, with proven adherence to DFARS data rights and limited rights clauses, ensuring that intellectual property and technical data are handled in accordance with federal defense contracting mandates. The supplier is responsible for maintaining rigorous quality control and documentation protocols to support audit readiness and mission-critical performance. This subcontract is issued under the NAICS code 423690 and is administered by the ASC Commodities Division within the Department of Defense. The solicitation was posted on July 29, 2026, with bids due by August 11, 2026, and performance is expected to support defense-related infrastructure, though the exact place of performance is not specified. While no set-aside status is indicated, the contract mandates full compliance with federal sourcing and data handling regulations, making it suitable only for vendors with proven experience in supplying controlled electronic components to U.S. defense programs.
Other Electronic Parts and Equipment Merchant Wholesalers

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 335931
New
DIBBS
Power Cable Assembly ManufacturingThe contract calls for the manufacture of branched electrical power cable assemblies designated as RP001, strictly in accordance with specified contractual drawings. This includes end-to-end execution of component sourcing, precise assembly, rigorous testing to ensure performance and reliability, proper labeling, and secure packaging required for government delivery. All work must comply with technical and quality standards as outlined in the provided documentation, with full accountability for sourcing approved materials and maintaining traceability throughout the production process. The deliverables are intended for final use by a U.S. Department of Defense entity under the ASC Commodities Division. This is a subcontract opportunity under NAICS code 335931, with a response deadline of August 11, 2026, and a posting date of July 29, 2026. There is no set-aside designation or specific geographic performance location specified, but the final products must meet federal procurement requirements for military applications. All production, testing, and delivery activities are expected to be completed in alignment with defense logistics standards, ensuring readiness for direct government use. Potential respondents must be prepared to demonstrate capability in high-reliability electrical assembly and compliance with defense contract obligations.
Current-Carrying Wiring Device Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 12 days
View Details
NAICS: 541512
New
DIBBS
Cybersecurity and Controlled Unclassified Information (CUI) SafeguardingThe contract requires the implementation of NIST SP 800-171 safeguards to protect Covered Defense Information, encompassing the development of a comprehensive System Security Plan, enforcement of strict access controls, and establishment of protocols for timely incident reporting. All security requirements must be fully aligned with federal standards for safeguarding Controlled Unclassified Information, ensuring that systems and processes are configured to mitigate risks associated with unauthorized access, disclosure, or compromise. The scope includes not only the primary contractor’s environment but also mandates the flow-down of these cybersecurity obligations to all subcontractors, requiring consistent compliance across the entire supply chain. This subcontract, issued by the Department of Defense’s ASC Commodities Division under NAICS code 541512, is focused on cybersecurity services for defense-related information systems. The response deadline is August 12, 2026, with the solicitation posted on July 29, 2026, indicating a compressed timeline for qualification and proposal submission. Performance is expected to support DoD missions where the protection of sensitive data is critical, and all parties must demonstrate proven capability in implementing and maintaining NIST 800-171 controls without exception. Failure to meet these requirements may result in noncompliance penalties or termination of contractual obligations.
Computer Systems Design Services

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541611
New
DIBBS
Supply Chain Compliance and Origin DocumentationThe contract requires the preparation and submission of documentation to verify the domestic origin of bearing components in full compliance with DFARS 252.225-7016, which mandates strict adherence to the Buy American Act and related trade regulations. This includes providing detailed cost breakdowns, official supplier declarations affirming the origin of each component, and complete traceability records that link raw materials and manufacturing processes back to U.S.-based sources. All submitted materials must clearly demonstrate that every bearing component is mined, produced, manufactured, or substantially transformed within the United States, with no reliance on foreign-sourced inputs that would jeopardize compliance. The solicitation is issued under the NAICS code 541611 for management, scientific, and technical consulting services, and is categorized as a subcontract under the Department of Defense’s ASC Commodities Division. Respondents must meet the August 12, 2026 deadline for submission, with documentation needing to be thoroughly organized and auditable to support government verification efforts. While the place of performance and point of contact details are unspecified, the requirement applies to all entities involved in supplying bearing components and their associated supply chain partners. Failure to provide accurate, complete, and verifiable documentation will result in noncompliance and potential disqualification from contract award.
Administrative Management and General Management Consulting Services

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561910
New
DIBBS
Defense-Compliant Packaging, Preservation, and Labeling ServicesThe contract requires the provision of defense-compliant packaging, preservation, and labeling services for critical bearings used in military applications, adhering strictly to MIL-STD-129 for labeling, MIL-STD-2073-1E for preservation standards, and RP001 for palletization. All deliverables must ensure full traceability and seamless integration with the prime contractor’s existing traceability systems, which demands precise documentation and rigorous quality control throughout the process. The services are essential to maintaining operational readiness and compliance with Department of Defense supply chain requirements. This subcontract, issued by the ASC Commodities Division under the Department of Defense, targets vendors capable of handling high-stakes defense components with exacting military specifications. The solicitation was posted on July 29, 2026, with a response deadline of August 12, 2026, and falls under NAICS code 561910 for other support activities for transportation. Performance is expected to align with government logistics networks, and while specific location details are not provided, the work must support the broader defense supply chain infrastructure. Vendors must demonstrate proven experience in military packaging standards and the technical capability to interface securely and accurately with established traceability platforms.
Packaging and Labeling Services

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332991
New
DIBBS
Cylindrical Roller Bearing Manufacturing and SupplyThe contract requires the manufacture and delivery of 200 cylindrical roller bearings meeting strict military specifications, with all production activities limited to the United States, its outlying areas, or Canada. At least 50 percent of the total component cost must originate from these regions to satisfy domestic content compliance requirements. Full documentation and successful completion of First Article Testing are mandatory to verify conformance to performance, dimensional, and quality standards before量产. The work is classified as a subcontract under NAICS code 332991, and the solicitation is managed by the ASC Commodities Division within the Department of Defense. Responses must be submitted by August 12, 2026, with the contract opportunity posted on July 29, 2026, and all deliverables must be performed in accordance with defense procurement protocols to ensure reliability and traceability for military use.
Ball and Roller Bearing Manufacturing

POSTED

about 15 hours ago

DEADLINE

in 13 days
View Details