Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PIN, STRAIGHT, HEADLESS

Active
SPE4A6-26-T-13HQFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for 28 straight headless pins with NSN 5315-01-225-0667 and is issued under solicitation SPE4A6-26-T-13HQ by the Defense Logistics Agency’s ASC Commodities Division. The delivery deadline is 142 days after award, and responses are due by August 13, 2026. The item is subject to stringent quality and packaging requirements outlined in the DLA Master List of Technical and Quality Requirements, which governs all referenced R and I numbers. Critical item source inspection is mandatory, and all sampling must comply with MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect acceptance criteria unless otherwise stated; unspecified attributes are treated as major with a verification level of IV or an AQL of 1.0. Physical identification and bare item marking are required, and the item’s technical data is subject to export controls under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048. Access to controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, valid DOD export control training, and DLA authorization. The place of performance is New Cumberland, PA, and the NAICS code is 332111 for metal forgings and stampings, indicating the supplier must meet federal procurement standards for this precision component.

General Info

28 headless pins, NSN 5315-01-225-0667, due in 142 days, ITAR/EAR controlled, zero-defect inspection, New Cumberland, PA.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332111 - Iron and Steel ForgingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A6-26-T-13HQ.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Christina Pyle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,STRAIGHT,HEADLESS
PIN,STRAIGHT,HEADLESS
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
(19200) U.S.ARMY ARNAMENT RESEARCH & DEVELOP COMM.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
CRITICAL ITEM SOURCE INSPECTION REQUIRED.
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint
SPE4A6-26-T-13HQ
SECTION B
Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 5315-01-225-0667 Quantity: 28 EA Purchase Request: 7017409810QTY: 28 Delivery: 142 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332111
New
DIBBS
CHANNEL, STRUCTURAL
Solicitation # SPE8E4-26-T-1964
The contract specifies the procurement of a structural steel channel made from ASTM A36 steel, with exact dimensional specifications of 1.50 by 2.50 inches, identified by part number 12442180. The finish requires zinc plating per ASTM B633, category SC4 (Fe/Zn 25), type VI, with a prime coating conforming to MIL-DTL-53030 or MIL-PRF-32348, adhering to dry film thickness standards under MIL-DTL-53072, followed by a topcoat compliant with MIL-PRF-22750, type II, in color #24533 semigloss green. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with applicable revisions tied to solicitations or amendments. The product must conform to MIL-STD-130N for identification marking and be manufactured under an ISO 9001:2008 Quality Management System. A Certificate of Conformance and quality compliance documentation are mandatory, with CDRLs and DD Form 1423s required for delivery verification. The contract calls for 11 units to be delivered FOB origin within 182 days, with zero variance permitted in quantity. Inspection and acceptance occur at the destination point, specifically the DLA Distribution Red River facility in Texarkana, Texas. Packaging must comply with ASTM D3951, prioritized by DLA Master List requirements, and all units must be labeled and palletized per MIL-STD-129 and RP001 packaging standards. The unit of issue is each (EA), priced at $11.00 per unit, with total contract value of $121.00. The NSN for the item is 9520-01-540-5600, and the original delivery requirement was June 3, 2027, with a need ship date of August 5, 2026. The contract is subject to federal acquisition regulations, including FAR 52.246-15 and higher-level quality requirements, and solicitation details are accessible via DIBBS. The contract falls under NAICS code 332111 and is managed by the Department of Defense through the Red River Receiving Building, with Pamela Duff
RED RIVER RECEIVING BLDG

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2003
The contract specifies the procurement of cold drawn, normalized, flat steel bar material composed of SAE 4130 alloy, with a thickness of 1.000 inch, width of 2.000 inches, and length between 10 and 12 feet in whole-foot increments only, with a reference weight of 6.800 pounds per foot. The material must be supplied with a Certificate of Quality Compliance, including mill certification, provided with every shipment and forwarded to the DLA Troop Support Contracting Officer. Continuous identification markings are mandated on each unit, including the DLA delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions, applied via stamping or stenciling that must be legible, waterproof, and non-contaminating. Adhesive labels are required for bars under 0.250 inches in nominal OD. Packaging must follow MIL-STD-2073-1E and DLA packaging requirements, with special codes Z and ZZ per ASTM A700, and marking in compliance with MIL-STD-129. The NSN is 9510-00-640-4974, quantity is 75 feet, unit price is $75.00 per foot for a total of $5,625, with delivery required within 153 days FOB origin to Tinker AFB, Oklahoma. Quality and technical requirements are governed by the DLA Master List of Technical and Quality Requirements and referenced standards such as SAE AMS-S-6758B and SAE AMS2806. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible; deviations must be explicitly declared, and non-compliant submissions constitute unauthorized substitutions with potential criminal penalties. Shipments must include both units of measure when specified, and the requirement to provide CDRL-METALSCERT-26124 documentation is binding. Source inspection is waived for QSLD-compliant suppliers, eliminating the need for additional quality conformance inspections under referenced protocols.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BOLT, MACHINE
Solicitation # SPE4A6-26-T-13UR
This contract specifies the procurement of 243 machine bolts identified by NSN 5306-01-535-2413 and part number AN4C45A, classified as a commercial item defined by consensus non-government standards under NASM3 through NASM20 Revision 5 dated 02/28/2025. The item must comply with all technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with verification governed by MIL-STD-1916 or ASQ H1331 Table 1 using zero-defect sampling unless otherwise mandated. All Class 3A and 3B threads must be gaged in accordance with SAE AS8879 Category 1 or MIL-S-7742 safety-critical standards, excluding self-locking nuts and threads below specified diameters. Identification markings must follow MIL-STD-130N paragraph 4.1.b(2), supplemented by standard manufacturer and material marks. The hardware must be manufactured to the current revision of the governing standard at the time of production, with prior revisions acceptable only if they were current when the item was made. Packaging and labeling requirements mandate compliance with ASTM D3951, but are subordinate to DLA Master List provisions, requiring all packaging to be marked and labeled per MIL-STD-129 with unit of issue and quantity per unit pack as specified. Palletization must adhere to DLA Packaging Requirements for Procurement. The delivery is FOB origin with a 156-day lead time, and the item must be delivered by January 17, 2027, with no tolerance for quantity variance. Inspection and acceptance occur at the destination facility in New Cumberland, Pennsylvania, with all shipping details directed to the DLA Distribution Center. The contract references DLA Procurement Notes C19 and C20 for freight and first-destination transportation protocols, and the point of contact for inquiries is Sommer Yates with the Department of Defense, ASC Commodities Division.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-26-T-3379
This procurement contract specifies the supply of carbon steel bars meeting ASTM A108 Grade 1045 cold drawn specifications, with a diameter of 1 inch and lengths of 10 to 12 feet in whole-foot increments only. Each shipment must include a Certificate of Quality Compliance (Mill-Material Certification) delivered to the customer or DLA depot, with a copy forwarded to the DLA Troop Support Contracting Officer. Mandatory continuous identification markings are required on every unit, including the DLA contract delivery order number, NSN, specification revision, grade, manufacturer's heat and lot number, and dimensions, applied via stamping or stenciling using waterproof, non-contaminating ink that remains legible under normal handling. Adhesive labels are required for bars under 0.250 inches nominal OD, while tags are acceptable for wire, and failure to comply will result in rejection. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129, with special marking codes Z and ZZ as defined by ASTM A700, and palletization must follow DLA packaging requirements. The material is designated as a Critical Application Item, and all deliveries are FOB origin with a 10% quantity variance allowance, inspected and accepted at destination. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award under this solicitation; any deviation from this requirement must be explicitly noted. Non-compliant bids are considered unauthorized substitutions and may incur criminal penalties. The contract waives source inspection requirements for qualified QSLD suppliers, relieving them of obligations under COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006. Two line items are specified: 2 feet and 651 feet, both with the same NSN and delivery terms, with a total quantity of 653 feet to be shipped by January 18, 2027, against an original required delivery date of November 21, 2026. Delivery is directed to two DLA facilities in New Cumberland, PA, and Tracy, CA, with transportation governed by DLAD Procurement Notes C19 and C20. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2008
Steel bar material compliant with specification 4130, cold finished and normalized, is required in a 0.500 inch diameter and 10 to 12 foot length, delivered in whole foot increments only, with a reference weight of 0.668 pounds per foot. This item is designated as a critical application product and must fully conform to technical standards including SAE AMS-S-6758B, MIL-STD-129R, ASTM A700-14, and SAE AMS2806. Each unit must carry continuous identification markings that include the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer name, heat and lot number, and dimensions, applied via stamping or stenciling in a legible, waterproof, and durable manner. Adhesive labels are required for bars under 0.250 inches in diameter and tags for wire. Certification of quality compliance, including mill material data, must accompany every shipment and be submitted to the DLA Troop Support Contracting Officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond; any deviation from this requirement must be explicitly noted and constitutes an exception. Packaging must adhere to MIL-STD-2073-1E and DLA packaging requirements, with preservation methods in accordance with ASTM A700 and special codes Z and ZZ. Marking and labeling shall fully comply with MIL-STD-129, including the use of vinyl or plastic-coated pressure-sensitive labels where authorized. The delivery is FOB origin, with inspection and acceptance occurring at destination, within a 64-day timeline, with a 10% variance in quantity permitted. The product is subject to defense information controls and all applicable DLA technical and quality requirements referenced through the DLA Master List. Supply chain compliance, material origin, and certification are strictly enforced, with noncompliance potentially resulting in rejection of goods and criminal penalties.
DEPOT OKLAHOMA

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
HEAD, SAFETY, PRESSURE R
Solicitation # SPE8E6-26-T-4003
The contract pertains to the procurement of a commercial item identified as HEAD, SAFETY, PRESSURE RELIEF with NSN 4820011548123 and part number 03787 from AMEREX CORPORATION, for a quantity of 89 units at a unit price of $89.00, totaling $7,921.00. Delivery is required within seven days of award, FOB origin, with no tolerance for quantity variance, and inspection and acceptance will occur at the destination. All packaging must comply with ASTM D3951 as superseded by applicable DLA Master List of Technical and Quality Requirements, with labeling and marking strictly following MIL-STD-129, and palletization adhering to RP001 DLA Packaging Requirements. The item is subject to Defense Logistics Agency regulations governing commercial items, including provisions for the removal of government identification from non-accepted supplies. The required delivery date is October 18, 2026, with a need ship date of August 25, 2026. Shipping must follow DLAD Proc Notes C19 and C20, and the deliver-to address is DLA Distribution Depot Hill at Hill Air Force Base, Utah, with the contract reference SPE8E6-26-T-4003. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 332111, and is managed by the Department of Defense through Depot Hill.
DEPOT HILL

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1979
The contract specifies the procurement of 76 linear feet of annealed, round steel bar with a 4.500 inch diameter and a weight of 54.07 pounds per foot, supplied in whole-foot lengths of 10 to 12 feet. The material must conform to Steel Composition 304 and meet technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, including MIL-STD-129R for marking, ASTM A700-14 for preservation and packing, SAE AMS-QQ-S-763D for material spec, and SAE AMS2806 for certification. A Certificate of Quality Compliance, or mill material certification, is mandatory for every shipment and must accompany the product and be forwarded to the DLA Troop Support Contracting Officer. Each unit must carry continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s heat and lot number, and dimensions, with permitted marking methods limited to stenciling or stamping using non-contaminating, waterproof fluid that remains legible under normal handling. Adhesive labels are required for bars under 0.250 inches nominal OD, and tags are acceptable for wire. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, with special codes Z and ZZ applied as per ASTM A700. Shipments must be palletized and marked in accordance with the contract’s special marking requirements, including dual unit quantities when applicable. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to bid on this contract, and any deviation from QSLD requirements must be explicitly declared; non-compliance may result in rejection or criminal penalties for unauthorized substitution. References to government inspections, including COQC and QAP-EQ003, are waived for QSLD-compliant suppliers. The product is designated under NSN 9510-00-189-0606 and is to be delivered FOB origin to DLA Dist San Joaquin in Tracy, CA, 139 days from the contract award, with a permitted quantity variance of plus or minus 10 percent. Inspection and acceptance occur at destination. The shipment must be delivered by January 4, 2027, to meet the original requirement date of November 21, 2026. Packaging
DLA DIST SAN JOAQUIN

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1948
The contract specifies the procurement of steel bar material classified as COMP 302, supplied in hot rolled hexagonal shape, annealed condition, with a width of 0.625 inches across flats and lengths ranging between 8 and 12 feet, sold by the foot at a reference weight of 1.150 pounds per foot. The material must be supplied in whole-foot increments only and meet exact dimensional tolerances. Comprehensive quality and technical requirements are mandated under the DLA Master List of Technical and Quality Requirements, with certifications including a Certificate of Quality Compliance Mill-Material Certification required for every shipment, to be provided to both the customer and the DLA Troop Support Contracting Officer. Continuous identification markings are mandatory on each unit including the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer's heat and lot number, and dimensions. Marking methods are restricted to stenciling or approved stamping, with labeling using waterproof, non-contaminating inks. Adhesive labels are required for bars under 0.250 inches in nominal outer diameter, and tags are acceptable for wire. All suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award, and any deviation from this requirement must be explicitly declared, with noncompliance treated as an unauthorized substitution potentially subject to criminal penalties. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking governed by ASTM A700 and MIL-STD-129R, including special codes Z and ZZ for preservation and marking. Labels must be secure, legible, and resistant to handling, with additional marking rules applying when shipments involve dual units of measure. Delivery is FOB origin, with inspection and acceptance occurring at destination, under a 167-day delivery schedule with a 10% quantity variance allowance. The NSN is 9510-00-265-1650, with a total quantity of 54 feet and a unit price of $54.00 per foot, shipped to the DLA Distribution facility in New Cumberland, PA. All documentation referenced in the Technical Data Package including CDRL-METALSCERT, SAE AMS-S-7720B, ASTM A700-14, and MIL-STD-129R govern compliance, and QSL program waivers apply for qualified suppliers,
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1951
The contract specifies the procurement of 30 feet of steel bar, composed of grade 303 stainless steel, in a cold-finished hexagon shape with an annealed temper, measuring 0.875 inches across flats and supplied in whole-foot lengths of 10, 11, or 12 feet, with a reference weight of 2.307 pounds per foot. Material must comply with ASTM A582/A582M and SAE AMS2806 standards, and a Certificate of Quality Compliance, also known as a mill-material certification, must accompany every shipment and be forwarded to the DLA Troop Support Contracting Officer. All units must be permanently marked with the DLA contract delivery order number, NSN, specification revision, alloy and temper, manufacturer’s name, heat and lot number, and dimensions using approved methods such as stenciling or adhesive labels; stamping is permitted except for die stamping, and marking fluids must not contaminate the product. Packaging must follow MIL-STD-2073-1E and MIL-STD-129, with special labeling codes Z and ZZ per ASTM A700, and palletization must adhere to DLA packaging rules. The delivery is FOB origin, with inspection and acceptance occurring at the destination, and a 10% variance in quantity is allowed. The item is designated under NSN 9510-00-293-5009 and must be delivered by February 1, 2027, to the DLA Distribution facility in New Cumberland, Pennsylvania. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and non-compliance constitutes an unauthorized substitution with potential criminal penalties. The contract waives source inspection requirements for qualified suppliers, and CDRL-METALSCERT documentation must be provided if not already available in the DLA system.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
ANGLE, STRUCTURAL
Solicitation # SPE7M2-26-T-6018
This contract specifies the procurement of structural angle steel with a flange thickness of 0.250 inch, an overall width and height of 1.250 inches, and a 90-degree angle configuration. The material must be supplied in whole-foot lengths between 20 and 30 feet, with square ends and a reference weight of 1.92 pounds per foot. The product must comply with ASTM A36/A36M-19 specifications and is classified as a critical application item. All units must be identified with mandatory markings including the DLA contract delivery order number, NSN, specification revision, grade, alloy, part number, die number, temper, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contaminating the material; adhesive labels are required for units under 0.250 inch nominal OD, and tags are acceptable for wire. Packaging must follow MIL-STD-2073-1E and RP001 requirements, with no mercury or mercury compounds permitted in preservation, packaging, or labeling except for specific functional uses exempted by NAVSEA guidance. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to receive award under this solicitation, and any deviation from this requirement must be explicitly declared. The QSL program waives source inspection, COQC, PVT, QAP-EQ003, ASQ H1331, and RQ006 requirements for qualified suppliers, provided the product fully complies with the program’s terms. Non-compliance risks rejection of the product and potential criminal penalties for unauthorized substitutions. Material certification must be provided per CDRL-METALSCERT requirements, and the full technical and quality requirements are governed by the DLA Master List. The total quantity ordered is 2,992 feet, to be delivered FOB origin to Tracy, CA, within 202 days from award date. The contract allows for a 10% variance in quantity, with acceptance and inspection occurring at destination, and shipping must adhere to MIL-STD-129 marking standards with no special marking codes applied.
NUCLEAR REACTOR PROGRAM

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332111
New
DIBBS
BEARING, SLEEVE
Solicitation # SPE4A6-26-T-13EU
The contract pertains to the procurement of 28 sleeve bearings with NSN 3120-01-075-2046 under solicitation SPE4A6-26-T-13EU, issued by the Defense Logistics Agency's ASC Commodities Division. Delivery is required within 128 days after order, with performance located in Tracy, California. The item is subject to strict quality control requirements, mandating sampling per MIL-STD-1916 or ASQ H1331 Table 1 using a zero-defect acceptance criterion unless otherwise stipulated. Critical, major, and minor attributes are assigned verification levels VII, IV, and II respectively, or AQLs of 0.1, 1.0, and 4.0, with unspecified attributes treated as major. Measuring and test equipment must meet approved standards, and the manufacturer is expected to comply with all applicable quality assurance provisions. The technical data associated with this item is controlled under export regulations—either ITAR or EAR—and may not be disclosed to foreign persons, including those within the United States, without prior authorization from the Department of State or Commerce. DFARS 252.225-7048 governs access, and only DLA contractors with approved US/Canada Joint Certification Program status, who have completed mandatory training and questionnaire requirements, are permitted to handle the data. The contractor must also be certified under CMMC Level 2 by a C3PAO, and all covered defense information is subject to cybersecurity protections as defined by RD002. The contract was posted on August 5, 2026, with bids due August 13, 2026, under NAICS code 332111 for Federal procurement.
ASC COMMODITIES DIVISION

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 332111
New
DIBBS
ANGLE, STRUCTURAL
Solicitation # SPE8E4-26-T-1984
Structural steel angles meeting ASTM A6 Table A2.8 specifications for unequal legs are required, with an overall height of 2.000 inches, width of 3.000 inches, and a flange thickness of 0.250 inches. The material must be produced from Grade A rolled steel, rated at approximately 4.1 pounds per foot, and supplied in whole-foot lengths between 10 and 12 feet. All material must conform to the American Bureau of Shipping’s Rules for Building and Classing Steel Vessels, Part 2, Section 1, with supplementary requirements from Appendix 2/D, and must originate from an approved steel mill. Continuous identification markings are mandatory, including the DLA contract delivery order number, NSN, specification revision, grade, manufacturer’s name, heat and lot number, dimensions, and other specified data, applied via stamping or stenciling in legible, waterproof, non-contaminating form. Each shipment must include a Certificate of Quality Compliance and adhere to MIL-STD-129R marking standards with preservation methods specified in ASTM A700. The product is designated a critical application item and is subject to the Qualified Suppliers List for Distributors requirement, restricting procurement to approved QSLD suppliers only; non-compliant bids are considered deviations and subject to penalties. The material must also bear the “AB” marking per MIL-S-22698 and include an ABS surveyor’s endorsement on all certifications. Packaging must follow DLA’s RP001 and MIL-STD-2073-1E guidelines, with palletization and shipping directed to the DDSP New Cumberland facility. Delivery is due within 83 days of contract award, with a required ship date of November 9, 2026, and a quantity of 962 linear feet, subject to a plus or minus 10 percent variance. Cybersecurity Maturity Model Certification Level 2 self-assessment and handling of covered defense information are required. All technical and quality requirements referenced under RA001, RD002, RD004, and RQ011 are incorporated by reference from the DLA Master List.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 17 hours ago

DEADLINE

in 11 days
View Details

More opportunities from Department Of Defense → ASC COMMODITIES DIVISION

Same awarding agency

NAICS: 561730
New
DIBBS
Erosion Control and Landscaping
Landscaping Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 561990
New
DIBBS
Traffic Control and Signage
All Other Support Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 332312
New
DIBBS
Steel Fabrication and Erection
Fabricated Structural Metal Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541370
New
DIBBS
Surveying and Layout Services
Surveying and Mapping (except Geophysical) Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541620
New
DIBBS
Environmental Site Assessment and Remediation
Environmental Consulting Services

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 237310
New
DIBBS
Asphalt Paving and Site Surfacing
Highway, Street, and Bridge Construction

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238110
New
DIBBS
Concrete Forming and Placement
Poured Concrete Foundation and Structure Contractors

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238220
New
DIBBS
Plumbing and Piping Systems Installation
Plumbing, Heating, and Air-Conditioning Contractors

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 327320
New
DIBBS
Ready-Mix Concrete Supply
Ready-Mix Concrete Manufacturing

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 238210
New
DIBBS
Electrical Installation and Wiring Services
Electrical Contractors and Other Wiring Installation Contractors

POSTED

about 17 hours ago

DEADLINE

in 13 days
View Details
NAICS: 541330
New
DIBBS
Quality Inspection and Acceptance SupportThe contract entails performing comprehensive quality inspections for incoming and outgoing shipments at the origin location, adhering strictly to MIL-STD-1916 and AQL sampling standards to ensure all products meet government acceptance criteria. This work is critical to verifying compliance with military specifications before delivery, requiring precise execution of inspection protocols and documentation to support final acceptance by the Department of Defense. The performance location is designated as Robins AFB, Georgia, with all inspections to be conducted in alignment with the specified military standards. This is a small business set-aside subcontract under the NAICS code 541330, reserved exclusively for total small businesses as defined by the SBA, with a response deadline of August 13, 2026. The solicitation originates from the ASC Commodities Division, part of the Department of Defense, underscoring its importance to defense logistics and supply chain integrity. All work must be completed in accordance with federal acquisition regulations, and the contractor is expected to maintain rigorous quality controls to uphold the standards required for government contracts.
Engineering Services

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details
NAICS: 484220
New
DIBBS
Transportation and Shipping to DLAThe contract requires the transportation and shipping of packaged and labeled bolts from the origin point to DLA Distribution Warner Robins, GA, with strict adherence to DPAS priority rating, FOB origin terms, and the use of U.S.-flag vessels if ocean freight is involved. All shipments must comply with federal regulations governing defense logistics, ensuring timely and secure delivery to the specified performance location at Robins Air Force Base, Georgia. The requirement emphasizes full compliance with transportation standards and documentation to meet Department of Defense supply chain protocols. This subcontract is a Total Small Business Set-Aside under the SBA program, reserved exclusively for small businesses as defined by FAR 19.5, with the NAICS code 484220 indicating it pertains to truck transportation of freight. The solicitation was posted on August 5, 2026, with responses due by August 13, 2026, and is managed by the ASC Commodities Division under the Department of Defense. Interested parties must submit proposals through the DIBBS portal, and all logistical operations must align with federal procurement and national security shipping mandates.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

about 17 hours ago

DEADLINE

in 7 days
View Details