Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIN, STRAIGHT, HEADLESS

Active
SPE4A6-26-T-07HPFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the delivery of 16 straight headless pins identified by NSN 5315-00-316-6666 and part number C88963-21 under solicitation SPE4A6-26-T-07HP, with delivery due 162 days from the issue date, no later than February 28, 2027, and FOB origin terms applying. All items must be packaged in strict compliance with MIL-STD-2073-1E using preservation method 10 (clinging/dry), labeled per MIL-STD-129 with no special marking, and palletized according to DLA Packaging Requirement RP001. Packaging and preservation materials must be free of mercury or mercury compounds, as prohibited by IP056, and the product itself may not contain intentional mercury contact except for specific exemptions like batteries, sensors, or instruments approved by NAVSEA, which must include double containment. Sampling during inspection must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances allowed unless otherwise specified, and critical, major, and minor attributes must be verified at levels VII, IV, and II with corresponding AQLs of 0.1, 1.0, and 4.0. Inspection and acceptance occur at the destination, specifically at DLA Distribution San Diego, 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, with the contractor required to maintain a quality system compliant with SAE AS9003 or ISO 9001. All items must be physically marked per RQ017, and any non-accepted supplies must have government identification removed as per RQ011. The contract incorporates numerous DFARS and FAR clauses including safeguarding covered defense information (252.204-7012), cybersecurity requirements aligned with NIST SP 800-171 (252.240-7997), prohibitions on hexavalent chromium (252.223-7008), and mandatory electronic invoice submission through WAWF. Offerors must hold a valid UEI and CAGE code, represent their small business status accurately, and comply with restrictions on covered telecommunications equipment under 25

General Info

Deliver 16 headless pins by Feb 28, 2027, per MIL-STD packaging, zero defects, FOB origin, cybersecurity and quality compliance required.

Agency

Department Of Defense → ASC COMMODITIES DIVISIONView Agency

NAICS

332510 - Hardware ManufacturingView NAICS

Place of Performance

3581 CUMMINGS ROAD BLDG 3581, SAN DIEGO, CA, 92136-3581, US

Set-Aside

NONE

Documents

(1)

RFQ SPE4A6-26-T-07HP Request for Quotations DLA Aviation

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Sign up to view the full breakdown with detailed analysis of each section.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC COMMODITIES DIVISION
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → ASC COMMODITIES DIVISION
View Agency Profile
Office AddressUS
Contacts
Christina Pyle
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIN,STRAIGHT,HEADLESS
PIN, STAIGHT, HEADLESS
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL
NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT
CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED
UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY
USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED
INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS;
AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA.
PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS
CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN
A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR
MERCURY COMPOUND. (IAW NAVSEA 5100-003D).
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
CRITICAL APPLICATION ITEM
TDP Rev B Gen 2
SPE4A6-26-T-07HP
SECTION B
IAW BASIC DRAWING NR 80020 C88963
REVISION NR 34 DTD 03/21/2007
PART PIECE NUMBER: C88963-21
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017408943 0001 EA 16.000
NSN/MATERIAL:5315003166666
DELIVERY (IN DAYS):0162
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:A1 OPI:O
INTRMDTE CONT:D3 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP056: MERCURY OR MERCURY COMPOUNDS ARE PROHIBITED IN PRESERVATION,
PACKAGING, PACKING AND MARKING.
PARCEL POST ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SAN DIEGO CA 92136-3581
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3218
DLA DISTRIBUTION SAN DIEGO
3581 CUMMINGS ROAD BLDG 3581
SPE4A6-26-T-07HP
SECTION B
PR: 7017408943 PRLI: 0001 CONT’D
SAN DIEGO CA 92136-3581
US
Need Ship Date:01/03/2027 Original Required Delivery Date:02/28/2027
SPE4A6-26-T-07HP NSN/Part Number: 5315-00-316-6666 Quantity: 16 EA Purchase Request: 7017408943QTY: 16 Delivery: 162 days ADO

Similar Contracts

NAICS: 332510
New
DIBBS
RING, RETAININGThe contract is for the procurement of 59 retaining rings with NSN 5325-00-282-7016, valued at $3,481.00 under solicitation SPE4A6-26-T-07AU, issued by the ASC Commodities Division of the Department of Defense. Delivery is required 199 days after award, with FOB Origin terms and final delivery to the DLA Distribution facility in New Cumberland, PA. Inspection and acceptance must occur at origin, governed by FAR 52.246-2 and DLA-specific quality requirement RQ009, with the government retaining full authority for acceptance. Technical and quality compliance is governed by the DLA Master List of Technical and Quality Requirements, referenced via RA001, and specific standards including MIL-STD-2073-1E for packaging and preservation, MIL-STD-129 for marking and bar-coding, and ASQ H1331 or SAE AS9003 for inspection systems. Packaging must use preservation method 20 (CLNG/DRY), preservation material 19, wrap material GH, and conform to DLA packaging directive RP001. Physical identification of bare items is mandatory per RQ017, and all hazardous materials must be labeled according to OSHA’s Hazard Communication Standard and MIL-STD-129, with Safety Data Sheets required. Export control applies as the item contains technical data subject to ITAR or EAR, restricting disclosure to foreign persons; access requires JCP certification, completion of DLA export training, and prior approval. Cybersecurity requirements are mandated under DFARS 252.204-7012 for safeguarding covered defense information, and the contractor must report cyber incidents promptly. The acquisition prohibits the use of covered telecommunications equipment from designated foreign entities under DFARS 252.204-7018. Invoicing is exclusively through WAWF using the Invoice and Receiving Report (IRR) format. The contractor must affirm compliance with employment eligibility, anti-trafficking, sustainable products, and whistleblower protections, with all representations tied to SAM.gov registration and UEI/CAGE code validation. Small business considerations are applicable, though no set-aside designation is specified. Non-conformances in inspection must be zero unless otherwise stated. All contractual obligations are subject to deviations cited in FAR/DFARS clause amendments
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
RETAINING RING, GLANThis contract is for the procurement of two retaining rings, GLAN, with NSN 5365-01-096-3593 and part numbers 1386F56P06 and 1386F64H01, supplied by Northrop Grumman Systems Corporation under solicitation SPE4A6-26-T-07JF. The items are classified as critical application components requiring strict compliance with DLA packaging, marking, and quality requirements, including adherence to MIL-STD-2073-1E for preservation and MIL-STD-129 for labeling, with no special marking permitted. The contract mandates zero tolerance for mercury or mercury-containing compounds in any phase of manufacturing, packaging, or preservation, except for specific functional applications explicitly authorized by NAVSEA, which must include secondary containment for portable devices. Sampling and inspection follow MIL-STD-1916 or equivalent zero-defect acceptance criteria, with verification levels assigned based on attribute criticality, and no item uniqueness marking is required per Service customer direction. Delivery is FOB origin with a strict quantity variance of plus or minus zero percent and must be completed in 169 days, with the original delivery deadline set for September 27, 2028, and the requested ship date of January 10, 2027. The contract incorporates all relevant technical and quality requirements from the DLA Master List, including tailored higher-level quality provisions applicable to both manufacturers and non-manufacturers, source approval documentation, and procedures for removing government identification from non-accepted supplies. Packaging must conform to RP001 standards and be palletized accordingly, with all materials compliant with IP056's mercury prohibition. Inspection and acceptance occur at the destination facility at the DLA Distribution New Cumberland facility in Pennsylvania, with transportation details governed by DLAD procedural notes. The solicitation is a total small business set-aside under NAICS code 332510, issued by the Department of Defense’s ASC Commodities Division, with Christian Ray as the primary point of contact. The unit of issue is each, with a total contract value of $4.00 for the two units, and all documentation must align with DLA’s authorized unit of issue standards.
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
SCREW, CAP, SOCKET HEADThe contract specifies the procurement of socket head cap screws meeting MIL-DTL-1222J revision J dated December 8, 2000, as a critical application item with stringent technical and quality requirements. The screw is configured as a Type II, 0.164-8-32 UNC 2A, 0.875 inch nominal length, manufactured from A574 grade steel in accordance with the specification’s Tables I and III. Conformance verification must follow Section 4 of MIL-DTL-1222J, and surface markings including the material symbol, manufacturer’s logo, and lot number must be applied directly to the part per MIL-DTL-1222J Paragraph 3.13.2, with precedence given to material symbol, manufacturer’s symbol, and lot number if space is limited; unapplied markings may appear on packaging labels. The manufacturer’s symbol must be registered in MIL-HDBK-57, and mercury or mercury-containing compounds are strictly prohibited in the screw, its packaging, preservation, or marking except under narrowly defined exceptions. The item must comply with ASME B18.3-2012 dimensional standards and the reference drawing 53711 T9074-AS-GIB-010/271 revision 1. Packaging and delivery are governed by MIL-STD-2073-1E and DLA packaging requirements, with preservation method 10, drying, and unit packaging of 10 items per container, packed under a U pack code with no special marking. Each unit must be marked per MIL-STD-129, and palletization must adhere to DLA’s RP001. The NSN 5305-01-498-3180 covers a quantity of 73 units at $73.00 per unit, with FOB origin delivery to DLA Distribution’s New Cumberland facility by February 18, 2027, though shipped no earlier than January 10, 2027. Inspection and acceptance occur at destination, with zero variance allowed in quantity. The contract is issued under solicitation SPE4A6-26-T-07JV by the Department of Defense’s ASC Commodities Division, with Ashley Sacolick as the primary point of contact, and the NAICS code 332510 applies to
ASC COMMODITIES DIVISION

POSTED

1 day ago

DEADLINE

in 7 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOPThe contract solicitation SPE7L1-26-T-842P is for the procurement of 62 units of CLAMP, LOOP, manufactured through a metal casting process that requires dedicated tooling. This is a total small business set-aside under NAICS code 332510, with proposals due by July 27, 2026, and delivery required by April 3, 2027, at the destination in New Cumberland, Pennsylvania. The item is subject to stringent technical and quality standards defined in the DLA Master List of Technical and Quality Requirements, with compliance enforced through multiple far and DFARS clauses. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors and full adherence to NIST SP 800-171 for safeguarding covered defense information. Technical data associated with the item is controlled under export regulations—either ITAR or EAR—and distribution is restricted to contractors approved under the US/Canada Joint Certification Program who have completed mandatory DLA export control training and questionnaire. The use of ozone-depleting chemicals is strictly prohibited, superseding any conflicting specification requirements, and substitute chemicals require prior approval. Packaging and marking must comply with MIL-STD-2073-1E for preservation, MIL-STD-129 for labeling, and MIL-STD-130N for Unique Item Identification using Data Matrix ECC 200 barcodes. Inspection and acceptance occur at the destination, with quality thresholds set at AQL 0.1 for critical defects, 1.0 for major, and 4.0 for minor, governed by MIL-STD-1916 and FAR 52.246-15. All invoicing must be submitted electronically via WAWF, and contractors must maintain an active SAM registration. FOB terms are Origin, and all offers must include transportation to a U.S. destination. The contract includes a suite of compliance clauses addressing trafficking in persons, employment verification, sustainable products, hazardous material handling, hexavalent chromium prohibition, and restrictions on procurement from Communist Chinese military companies. Participation in the set-aside requires valid Small Business representation and compliance with socioeconomic reporting obligations, including UEI and CAGE codes for joint ventures or non-manufactured end items. No contract value is publicly listed due to fragmented or incomplete pricing data in the solicitation, and no formal evaluation factors are disclosed, leaving award methodology unspecified beyond compliance with technical acceptability and small
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details
NAICS: 332510
New
DIBBS
CAP-PLUG, PROTECTIVEThe contract pertains to the procurement of two protective cap plugs designed to seal against dust and moisture, identified by the NSN 5340-99-104-1415. The item must comply with DLA packaging requirements and incorporate technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or award date depending on the scale of the acquisition. The government mandates the removal of its identification from any non-accepted supplies and requires adherence to MIL-STD-130N for the identification marking of U.S. military property. The solicitation number is SPE7L1-26-T-841U, issued on July 16, 2026, with responses due by July 27, 2026. Delivery is required within 20 days of award, and the place of performance is listed as Washington DC, 20009-1091. The procurement is under NAICS code 332510, managed by the Department of Defense through the Land Supply Chain, and the primary point of contact is Mary Miller, reachable via email and phone provided.
LAND SUPPLY CHAIN

POSTED

1 day ago

DEADLINE

in 10 days
View Details