This Solicitation opportunity from Department Of Defense was posted on April 19, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PIN, STRAIGHT, THREAD

Closed

SPE4A2-26-T-0050Federal

Submission Closed04/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

Solicitation # SPE7M4-26-T-375P

Solicitation SPE7M4-26-T-375P is a request for quotations issued by the Defense Logistics Agency Land and Maritime, Fluid Handling Division, for the procurement of 69 nonmetallic hoses, identified by NSN 4720-01-585-1195. The requirement specifies a delivery period of 95 days, with a required delivery date of December 16, 2026. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, under the First Destination Transportation program. The procurement is categorized under NAICS code 326220 and includes a non-extendable shelf life of 120 months. The contract mandates strict adherence to quality and packaging standards, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. It prohibits the use of Class I ozone-depleting chemicals and requires compliance with the Buy American Act and the Berry Amendment. Inspection and acceptance will occur at the point of origin, with Certificate of Conformance procedures authorized under FAR 52.246-15. Invoicing and payment must be processed electronically through the Wide Area WorkFlow system. Offerors are required to submit quotes via DIBBS and are encouraged to provide quantity ranges due to demand volatility.

FLUID HANDLING DIVISION

POSTED

DEADLINE

CONNECTION,FLEXIBLE — 4730011445976 — N0010426QYAFK

Solicitation # N0010426QYAFK

This fixed-price solicitation from NAVSUP Weapon Systems Support Mech is for the manufacture and procurement of flexible connections, specifically NIIN 011445976, following the design represented by Cage Code 18444, reference number 299938-100. The contract includes a provision allowing the government to increase the order quantity by up to 100 percent via modification within 365 days of the award. Evaluation for the award is based on the lowest aggregate total price for the total quantity, including the option provision. The contractor is responsible for all inspection and quality assurance, including the submission of printed pressure and hydrostatic testing results prior to shipment. Strict adherence to mercury-free requirements is mandatory, as the items are intended for use on submarines and surface ships. Physical identification must comply with MIL-STD-130, and packaging must follow MIL-STD-2073-1 and MIL-STD-129. Deliveries are FOB Origin to designated DLA Distribution facilities in Pennsylvania and California. Invoicing and payment must be processed electronically through the Wide Area Workflow system.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

TBG2"DIA12MILMAT2 — 4720016707329 — N0010426QEG57

Solicitation # N0010426QEG57

This solicitation, issued by the Navsup Weapon Systems Support Mech, is a total small business set-aside for the procurement of repair parts under NAICS code 326220. The contract emphasizes strict adherence to technical documentation, including Individual Repair Part Ordering Data (IRPOD) and drawings available via a secure government portal. Key requirements include the prohibition of mercury, compliance with specific packaging standards such as MIL-PRF-23199, and the mandatory submission of first article testing and reports prior to the start of production. The agreement is governed by a specific order of precedence, with contract amendments and the schedule of supplies taking priority over technical specifications. Quality assurance is critical, requiring a government-approved inspection system and the submission of certification packages and test reports. Pricing for quotations remains valid for 60 days after the closing date, and the contract includes provisions for cybersecurity maturity model certification and priority ratings for national defense.

Navsup Weapon Systems Support Mech

POSTED

DEADLINE

Supply of Non-Metallic Hose Assemblies (NSN 4720-01-200-2200)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720-01-695-5826)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Nonmetallic Hose Assembly Supplier (NSN 4720015127604)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Hoses (NSN 4720015743123)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Nonmetallic Special Shaped Section Seal Supplier

LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Supplier of Nonmetallic Hose Assemblies (NSN 4720-01-514-1041)

LAND SUPPLIER OPNS ENGINES

POSTED

DEADLINE

Nonmetallic Hose Assembly Supplier (NSN: 4720015436072)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Nonmetallic Tubing Supplier (NSN 4720014802342)

FLUID HANDLING DIVISION

POSTED

DEADLINE

Supply of Nonmetallic Hose Assemblies (NSN 4720-01-655-2333)

FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 9 days

AI Contract Overview

The contract involves the procurement of 15 units of a threaded straight pin, identified by the National Stock Number 5315-00-326-1851 and part number 3-52848-1 from Boeing Company. It specifies adherence to technical and quality requirements as outlined by the Defense Logistics Agency (DLA) Master List, including non-tailored higher-level quality standards based on ISO 9001:2015, and detailed sampling and inspection procedures in accordance with MIL-STD-1916 or equivalent plans. Packaging and labeling must comply with ASTM D3951 and MIL-STD-129 standards, and palletization is governed by DLA packaging requirements to ensure proper handling and shipment to the designated delivery location at the DLA Distribution Depot in Tinker AFB, Oklahoma. The contract sets delivery at origin with inspection and acceptance points at the destination, allowing no variation in quantity. Documentation requirements for source approval and defense information protections apply, and government identification must be removed from any non-accepted supplies. The solicitation was issued by the Department of Defense ASC SMSG Division Special Acquisition and includes contact details for the primary point of contact. The procurement process adheres to DoD unit of issue conventions, and the final delivery date is scheduled 251 days from the award, with detailed shipping and transportation instructions provided to ensure compliance and successful fulfillment.

General Info

Procurement of 15 threaded straight pins from Boeing with strict DLA quality, packaging, and delivery standards.

Agency

Department Of Defense → ASC SMSG DIV SPECIAL ACQUISITIONView Agency

NAICS

326220 - Rubber and Plastics Hoses and Belting ManufacturingView NAICS

Place of Performance

3301 F AVE CEN REC BLDG 506 DR 22, TINKER AFB, OK, 73145-8000, USA

Set-Aside

NONE

Documents

(1)

SPE4A2-26-T-0050.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseClosed

PostedApr 19

Solicitation

Response DeadlineApr 27

Deadline has passed

Submission Closed

04/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SMSG DIV SPECIAL ACQUISITION

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → ASC SMSG DIV SPECIAL ACQUISITION

View Agency Profile

Office AddressUSA

Contacts

Amanda Grietzer

contact@example.gov

+1 (555) 000-0000

Full Description

PIN,STRAIGHT,THREAD
PIN,STRAIGHT,THREADED
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RC001: DOCUMENTATION REQUIREMENTS FOR SOURCE APPROVAL REQUEST (SAR)
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ042: Non-Tailored Higher-Level Quality Requirements (ISO 9001:2015) for Manufacturers and Non-Manufacturers
RT001: MEASURING AND TEST EQUIPMENT
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N 3-52848-1
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to
SPE4A2-26-T-0050
SECTION B
PR: 7016405005 PRLI: 0001 CONT’D
determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016405005 0001 EA 15.000
NSN/MATERIAL:5315003261851
DELIVERY (IN DAYS):0251
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3211
DLA DISTRIBUTION DEPOT OKLAHOMA
3301 F AVE CEN REC BLDG 506 DR 22
TINKER AFB OK 73145-8000
US
Need Ship Date:00/00/0000 Original Required Delivery Date:04/17/2026
SPE4A2-26-T-0050 NSN/Part Number: 5315-00-326-1851 Quantity: 15 EA Purchase Request: 7016405005QTY: 15 Delivery: 251 days ADO