Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Pipe Bending Machine

Active

N6264926QE043Federal

Response Deadline09/10/2026, 01:00:00 AM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

Solicitation N6264926QE043 is a combined synopsis and request for quotation issued by the Department of Defense through the Navsup Flc Yokosuka Sasebo Office for the procurement of a pipe bending machine including various molds. This acquisition is conducted under part 12 for commercial products and services and is not set aside for small business concerns. The requirement falls under NAICS code 333517 and specifies a performance period of six months from the date of award. The equipment is to be delivered to Sasebo, Nagasaki, Japan, with payment to be processed in Japanese Yen. The solicitation was posted on August 31, 2026, with a response deadline of September 10, 2026. Interested parties should refer to the electronic provisions and clauses available at acquisition.gov and direct inquiries to the primary point of contact, Yasuhiko Motooka.

General Info

DoD seeks a pipe bending machine and molds for delivery to Sasebo, Japan.

Agency

Department Of Defense → Navsup Flc Yokosuka Sasebo OfficeView Agency

NAICS

333517 - Machine Tool ManufacturingView NAICS

Place of Performance

Sasebo, JP-42, JPN

Set-Aside

NONE

Documents

(2)

Item Description 20260831 - Pipe Bending Machine

PDF•3 pages•sow

RFQ N6264926QE043 - Pipe Bending Machine

PDF•41 pages•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseCombined Synopsis

PostedAug 31

Combined Synopsis

Response DeadlineSep 10

Submission deadline

Response Deadline

09/10/2026, 01:00:00 AM UTCin 9 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → Navsup Flc Yokosuka Sasebo Office

Contacts1 person available

OfficeFPO, AP, 96322-1500, USA

Organization / Agency

Department Of Defense → Navsup Flc Yokosuka Sasebo Office

View Agency Profile

Office AddressFPO, AP, 96322-1500, USA

Contacts

Yasuhiko Motooka

contact@example.gov

Full Description

Show more

This is a combined synopsis/solicitation for commercial products or commercial services prepared in accordance with part 12. This announcement constitutes the only solicitation. Offers are being requested and a separate written solicitation will not be issued.

Solicitation number N6264926QE043 is issued as a Request for Quotation (RFQ) for Pipe Bending machine.

This acquisition is not set-aside for small business concerns. This solicitation incorporates provisions and clauses by reference. The full text of provisions and clauses may be accessed electronically at www.acquisition.gov.

Similar Contracts

Same NAICS industry code

Solicitation # SPMYM226Q0177

Solicitation SPMYM226Q0177, issued by DLA Maritime - Puget Sound, is a total small business set-aside for the turnkey procurement, installation, and operational testing of one Monarch EE manual lathe (10 x 20 inches) for the Trident Refit Facility (TRFB) in Silverdale, Washington. The scope of work includes the removal of existing equipment at Naval Base Kitsap-Bangor, the delivery and mounting of the new lathe to a concrete pad, and the connection of all necessary utilities. To be considered technically acceptable, the equipment must meet specific salient characteristics and be certified by a Nationally Recognized Testing Laboratory (NRL) in compliance with OSHA CFR Title 29 Part 1910. The contractor is responsible for providing two hard copies of the manufacturer's operation and maintenance manuals and the NRL certification report, as well as conducting a three-hour no-load operational test to verify 100 percent functionality. The award will be based on technical acceptability, price, and past performance, with a particular emphasis on PPIRS-SR ratings. Offerors must submit a signed and completed solicitation via email to the designated point of contact by August 26, 2026. Key requirements include adherence to NIST SP 800-171 for non-COTS items, compliance with Buy American and Balance of Payments programs, and the use of the Wide Area Work Flow (WAWF) system for electronic invoicing. Delivery is specified as FOB Destination Silverdale, WA, and all packaging must comply with ASTM-D-3951 standards. The contractor is also required to provide a warranty covering defects in design, materials, and workmanship for at least one year from the date of acceptance.

DLA Maritime - Puget Sound

POSTED

about 24 hours ago

DEADLINE

in about 8 hours

Rotary Draw Hand Tube Bender

Solicitation # FA469026Q0046

The 28th Contracting Squadron at Ellsworth AFB is seeking a rotary draw hand bender under solicitation FA469026Q0046. This is a total small business set-aside opportunity utilizing a firm-fixed-price contract. To be considered technically acceptable, offerors must provide a technical characteristics statement and confirm the machine's ability to produce part number L5842706. The government will award the contract to the lowest-priced technically acceptable offeror. Delivery is required FOB Destination to Ellsworth AFB, South Dakota, within 90 days of the contract award. All inquiries must be submitted in writing to the designated points of contact by September 10, 2026, and final quotes are due by September 14, 2026.

FA4690 28 Cons Pkc

POSTED

about 24 hours ago

DEADLINE

Solicitation # W911S226U4047

This contract, solicitation number W911S226U4047, is a request for quotation for a metal plate embosser ID tag machine issued by the Department of Defense for the W6QM Micc-Ft Drum office in New York. The procurement is designated as a total small business set-aside under NAICS code 333517. The required equipment must feature a high-resolution color touchscreen and IoT capabilities for remote management via web services or VNC client, with data transfer supported through Ethernet and FTP protocols. The machine must be capable of embossing, indenting, or debossing materials such as stainless steel, carbon steel, aluminum, copper, and brass, with a thickness range of 0.4 to 0.9 mm. It must support medical alert tags and dog tags with input and output hopper capacities of up to 250 plates and a performance rate of 231 tags per hour. Technical specifications include a CPU Arm Cortex-A8, Linux-based OS, and compatibility with Windows, MacOS, and Linux via proprietary Power Tag software. Quotes are evaluated based on price and technical factors, with a delivery target of 30 days and a requirement for submission through PIEE.

W6QM Micc-Ft Drum

POSTED

about 24 hours ago

DEADLINE

in about 7 hours

Mobile Laser Cleaner

Solicitation # W50S9C26QA020

Solicitation W50S9C-26-Q-A020 is a combined synopsis and request for quote issued by the Vermont Air National Guard for the procurement of three mobile laser cleaners. This requirement is a firm fixed price contract and is 100 percent set aside for small businesses under NAICS code 333517. The equipment will be used to remove paint and light corrosion from airfield ground equipment as a safer alternative to sanding hex chromate primer. Technical specifications require a pulsed fiber laser source with a power outage of 200 to 300W, compatibility with 110V input power, an ergonomic handheld applicator, and a total weight of less than 100 lbs. The units must be housed in a ruggedized, wheeled transportation case for mobility. Quotes must be submitted electronically to the designated points of contact, MSgt Kristen Lucey and MSgt James Yoshikawa, no later than September 8, 2026. Evaluation will be based on a tradeoff source selection process considering technical capability, delivery, past performance, and total evaluated price, with a desired delivery window of 30 days after receipt of order. Performance will take place in South Burlington, Vermont. Offerors must comply with all incorporated FAR and DFARS provisions, including SAM registration and prohibitions on covered defense telecommunications equipment.

W7N4 Uspfo Activity Vtang 158

POSTED

about 24 hours ago

DEADLINE

MILLING MACHINE, VER

Solicitation # SPE8E5-26-T-4100

This contract, solicitation number SPE8E5-26-T-4100, is issued by the Defense Logistics Agency for the procurement of one vertical milling machine, identified by NSN 3417-01-400-3438 and part number model EV 0000002R8 from JD Hamlett Inc. The requirement is for a single unit with a delivery timeframe of 10 days after order. The item is to be delivered FOB Origin and will be shipped to the 0553 CS BN CO A Composite at Fort Hood, Texas. The procurement is subject to specific technical and quality requirements as outlined in the DLA Master List and requires packaging in accordance with ASTM D3951 and MIL-STD-129, with palletization following RP001 guidelines. Inspection and acceptance will occur at the destination. The original required delivery date is set for December 18, 2025, and the solicitation was managed through the DIBBS system with a response deadline of September 10, 2026.

Defense Logistics Agency

POSTED

DEADLINE

REAMER, MACHINE

Solicitation # SPE8E5-26-T-3982

Solicitation SPE8E5-26-T-3982, issued by the Defense Logistics Agency Troop Support Construction and Equipment, is a request for quotations for ten machine reamers, identified by NSN 3455013740831. This acquisition is designated as a small business set-aside under NAICS code 333517. The items are classified as commercial products and are designated as critical application items. Delivery is required within five days after receipt of order, with shipping terms set as FOB Destination. The primary delivery locations include a parcel post address in the United States and a freight shipping address in Atsugi, Japan. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951 for packaging and MIL-STD-129 for marking and labeling. Palletization must comply with DLA packaging requirements RP001. Quality assurance and sampling shall be conducted according to MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Administrative requirements include electronic invoicing via Wide Area WorkFlow and compliance with various FAR and DFARS clauses, including safeguarding covered defense information and the Buy American and Balance of Payments Program.

Defense Logistics Agency

POSTED

DEADLINE

in about 5 hours

Metal Plate Embossing Machine Supply and DeliveryThis subcontract involves the supply and delivery of one metal plate embossing machine for the Department of Defense, specifically for use at Incirlik Air Base in Turkey. The equipment must adhere to the detailed technical specifications provided in the contract attachments. The opportunity was posted on August 28, 2026, with a response deadline of September 7, 2026. This procurement falls under NAICS code 333517 and is managed by the FA5685 39 Cons Lgc agency.

FA5685 39 Cons Lgc

POSTED

DEADLINE

Metal Plate Embossing Machine and Red Medical Alert Tags

Solicitation # FA568526QA20

Solicitation FA568526QA20, issued by the Department of Defense 39th Contracting Squadron, seeks a metal plate embossing machine and red medical alert tags to support the 39 MDG at Incirlik Air Base in Adana, Turkey. The requirement specifically identifies the CIM ME2000S model as the standard for salient characteristics, requiring a machine capable of automatic high-volume loading and data transfer via Ethernet, USB, or FTP for off-network use. The equipment must support specific tag materials and thicknesses and include comprehensive warranty coverage. The procurement is a combined synopsis and solicitation with a response deadline of September 7, 2026. Award will be granted based on the lowest-price technically acceptable evaluation, considering both price and technical capability. Notably, competition is restricted to vendors registered to do business in Turkey. The contract includes various FAR and DFARS clauses regarding electronic payments, SAM registration, and prohibitions on covered defense telecommunications equipment.

FA5685 39 Cons Lgc

POSTED

DEADLINE

Cincinnati Lathe MO Retrofit

Solicitation # W519TC-26-Q-A181

The Army Contracting Command-Rock Island is soliciting a total small business set-aside for an electrical retrofit of the Cincinnati Lathe MO 5305U18-88-013 located at the Rock Island Arsenal Joint Manufacturing and Technology Center in Illinois. The project requires a qualified contractor to engineer, procure, manufacture, and install a comprehensive electrical retrofit package, featuring a FANUC Oi-TF Plus Control series with a 15-inch display, servo and spindle motor upgrades, and updated wiring and enclosures. The scope includes all necessary labor for installation, troubleshooting, calibration, and PLC programming, concluding with system debugging, training, and the acceptance of test cuts. All new components and wiring must adhere to NEMA standards, and the contractor must comply with OSHA 29 CFR-1910 Subpart S and 1910.147 safety standards. The government intends to award a single firm-fixed-price purchase order to the lowest-priced, responsive, and responsible vendor following a technical review of quotes. Submissions are due by 6 PM on September 7, 2026, and must include shipping to Rock Island Arsenal and a Certificate of Conformance for all items. The overall period of performance shall not exceed 34 weeks after contract award, with a final delivery date of November 1, 2026. Payment will be processed via Wide Area Workflow, and the contractor is responsible for all transportation costs under FOB Destination terms.

POSTED

DEADLINE

W0113-27CS29 Lathe

Solicitation # WS5855124825

The Government of Canada, through the Department of Public Works and Government Services, is soliciting offers for the procurement of one set of industrial-grade precision lathe for the Department of National Defence. This solicitation, identified by number WS5855124825, will be performed in Ontario outside of the National Capital Region. All required supporting documentation and bid submissions must be received by September 18, 2026, at 14:00 EDT. It is critical to disregard any conflicting closing times listed on Ariba Discovery or CanadaBuys, as any bids submitted after the 14:00 EDT deadline will be declared non-responsive. David Barltrop serves as the primary contracting authority for this requirement.

Department of Public Works and Government Services

POSTED

DEADLINE

CNC Abrasive Waterjet Supply and DeliveryThis subcontract, managed by the General Services Administration's Office of Centralized Acquisition Services, requires the supply, configuration, and delivery of six commercial off-the-shelf CNC abrasive waterjet systems. The equipment must meet all provided technical specifications and be delivered to designated U.S. Air Force bases within 365 days after receipt of order. The procurement falls under NAICS code 333517. Interested parties must submit their responses by the deadline of September 4, 2026, at 6:00 PM.

Office Of Centralized Acquisition Services

POSTED

DEADLINE

Dieless Robotic Sheet Metal Forming System Integration

FA8684 Aflcmc Rodk

POSTED

DEADLINE

in about 2 months