Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PIPE, EXHAUST

Active
SPE7L5-26-T-4628Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of 14 units of PIPE, EXHAUST with NSN 2990-01-414-4072 under solicitation SPE7L5-26-T-4628, which is a Total Small Business Set-Aside as defined under FAR 19.5, targeting NAICS code 336390. The delivery must be completed within 158 days after order, and the solicitation was posted on July 26, 2026, with responses due by August 6, 2026. Technical and quality requirements are incorporated by reference from the DLA Master List of Technical and Quality Requirements, with the applicable revision based on the solicitation issue date or award date depending on acquisition size. Cybersecurity requirements mandate CMMC Level 2 certification for third-party assessors, and the item contains covered defense information requiring compliance with DFARS 252.225-7048. Technical data associated with this item is subject to export controls under ITAR or EAR, and access is restricted to contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandatory DOD export control training, and have received explicit approval from DLA to handle such data. Packaging must conform to DLA standards, and the place of performance is specified as Tracy, California, 95304-5000, with Mary Rowley designated as the primary point of contact for inquiries.

General Info

Procurement of 91 exhaust pipes under DLA contract, due August 6, 2026, via DIBBS for U.S. federal use.

Agency

Department Of Defense → LAND SUPPLIER OPNS ENGINESView Agency

NAICS

336390 - Other Motor Vehicle Parts ManufacturingView NAICS

Place of Performance

REC WHSE 57, TRACY, CA, 95304-5000, US

Set-Aside

SBA

Documents

(1)

SPE7L5-26-T-4628.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

1 update
PhaseSolicitation
Posted

Solicitation

Amendment 1

Contract was updated

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LAND SUPPLIER OPNS ENGINES
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LAND SUPPLIER OPNS ENGINES
View Agency Profile
Office AddressUS
Contacts
Mary Rowley
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PIPE,EXHAUST
PIPE, EXHAUST
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD005: Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 2990-01-414-4072 Quantity: 14 EA Purchase Request: 7017519919QTY: 91 Delivery: 158 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336390
New
DIBBS
STARTER, ENGINE, HANDThis contract is for the procurement of 485 units of a hand starter for diesel engines, specifically designated as a critical application item with the NSN 2990-01-323-0307. The item is classified as a commercial off-the-shelf product, with adequate catalog data available for evaluation of alternatives, and must comply with DLA packaging requirements and MIL-STD-2073-1E for preparation, including specific packaging methods, containment materials, and unit container codes. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the hardware, except for functional uses in batteries, fluorescent lights, sensors, controls, weapon systems, or specified chemical reagents, with mercury-containing portable devices requiring shockproof construction and secondary containment per NAVSEA 5100-003D. The contract mandates full compliance with DLA’s technical and quality requirements referenced by R or I numbers from the DLA Master List, and all items must be marked in accordance with MIL-STD-129 without special marking codes. Delivery is set for FOB origin, with a 178-day lead time and no variance allowed in quantity, and inspection and acceptance occur at the destination. The sole deliver point is the DLA Distribution San Joaquin facility in Tracy, California, and the required ship date is February 1, 2027. This procurement is under a Women-Owned Small Business set-aside, with technical and administrative oversight from the Department of Defense’s Land Supplier Operations Engines, and pricing is fixed at $485.00 per unit, totaling $235,225.
LAND SUPPLIER OPNS ENGINES

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
SWITCH, LIQUID LEVELThe contract specifies the procurement of a liquid level switch, part number 3876333-3 manufactured by Honeywell International Inc., with NSN 2915-01-654-8306, quantity of one unit, under solicitation SPE4A7-26-T-594W. Delivery is required within 166 days to the DLA Distribution facility in New Cumberland, PA, with FOB origin terms and zero variance allowed on quantity. Inspection and acceptance occur at the destination. The item is designated as a critical application, subject to stringent quality and traceability requirements including compliance with MIL-STD-1916 or ASQ H1331 sampling standards, zero non-conformances in inspection unless otherwise specified, and adherence to MIL-STD-2073-1E packaging and MIL-STD-129 marking standards. Supply chain traceability documentation must be retained as per DLA Procurement Note C03, and the item requires Item Unique Identification (IUID) per MIL-STD-130 and DFARS 252.211-7003. The contractor must also comply with CMMC Level 2 self-assessment, FAA airworthiness approval, and FAA bare item marking requirements. Packaging and preservation follow DLA-specific directives, with special marking code 00 indicating no special marking. The contract is a total small business set-aside under NAICS code 336390, with a response deadline of August 3, 2026, and an original delivery requirement of August 27, 2026, though the need ship date is January 17, 2027. All technical and quality requirements referenced are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation or award date as applicable.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
DIBBS
MUFFLER, EXHAUSTThe contract is for the procurement of one muffler, exhaust unit with NSN 2990-01-417-9342 and part number 86192M supplied by CUMMINS FILTRATION INC., under solicitation SPE7L1-26-T-876R. The item must be delivered FOB destination within 20 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur upon delivery at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 standards, including specific packaging methods, materials, and unit containment requirements, with palletization governed by DLA packaging protocols. The delivery address is USS SAN ANTONIO LPD 17, FPO AE 09587, and shipment must follow DLAD procedural notes C19 and C20. Mercury and mercury-containing compounds are strictly prohibited in the hardware unless explicitly exempted for functional components such as certain batteries, lamps, sensors, or weapons systems, in which case secondary containment and shock-proofing are mandatory per NAVSEA 5100-003D. All technical and quality requirements referenced by R or I numbers are incorporated by direct linkage to the DLA Master List of Technical and Quality Requirements, with revision control tied to the solicitation issue date or amendment date, depending on acquisition size. The contract is issued under the Department of Defense’s Land Supply Chain, with Kristina Derry as the primary point of contact, and procurement is governed by federal solicitation rules under NAICS code 336390.
LAND SUPPLY CHAIN

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
COMPUTER, SPECIAL PUThe contract is for one unit of a special-purpose computer identified by NSN 2541-01-694-4944, issued under solicitation SPE7L3-26-T-133X with a response deadline of August 6, 2026, and a required delivery within five days after award. The item falls under NAICS code 336390 and is procured by the Department of Defense through the Land Supplier Ops Vehicle Support office. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition size. Packaging must comply with MIL-DTL-117, Type II, Class C, Style 1, using a medium-duty, waterproof, greaseproof, and opaque bag to protect against UV deterioration, applicable to direct vendor delivery, foreign military sales, and stock shipments. The item is exempt from the First Destination Packaging Program and is not eligible for standard commercial packaging. The use of class I ozone-depleting chemicals is strictly prohibited, and any substitutions require prior approval unless explicitly permitted by the specification. All supplied items must be asbestos-free; any alternative materials must be approved per Clause L30 and Provision 4 conditions. Point of contact for inquiries is Kayla Buchanan, with direct email and phone provided for communication.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
BOOT, VEHICULAR COMPThis contract pertains to the procurement of two vehicular compound boots, identified by NSN 2530012727444 and part number 1681296C91, under solicitation SPE7L3-26-T-134K. The item must be delivered within ten days to the designated military address in Drawsko Pomorskie, Poland, with delivery terms set at FOB origin and no tolerance for quantity variance. All packaging and labeling must comply with MIL-STD-129 and DLA’s Packaging Requirements for Procurement (RP001), and the materials must be packaged according to ASTM D3951 unless deemed hazardous under Fed-Std-313, in which case TQ requirement IP025 applies. The DLA Master List of Technical and Quality Requirements takes precedence over any other standards, and ozone-depleting chemicals are strictly prohibited. The boots must be marked with the specified military routing identifier and shipped via the fastest traceable method, excluding parcel post. Acceptance and inspection occur at the destination, and the unit of issue is each (EA) with a total price of $2.00 per unit. The requirement is associated with a project code, government tracking identifiers, and a delivery deadline of July 22, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
DIBBS
FILTER BODY, FLUIDThe contract is for the procurement of a FILTER BODY, FLUID with NSN 2910-01-581-6417 under solicitation SPE7LX-26-U-9020, issued by the Department of Defense’s Strategic Acquisition Program Directorate. The requirement is set aside entirely for small businesses and specifies a quantity of 174 units to be delivered within 74 days under FOB origin terms, with no variance allowed in quantity. The item is subject to DLA’s Master List of Technical and Quality Requirements, which override all other standards including ASTM D3951, and packaging must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement. Inspection and acceptance occur at the destination, and all packaging must be labeled and palletized according to DLA-specific guidelines including the defined Unit of Issue and Quantity per Unit Pack. The contract includes delivery instructions, technical compliance mandates, and references to DLA’s official documentation for unit of issue conversions and procurement rules. The point of contact for inquiries is Theodore Misiolek, with a response deadline of August 10, 2026, and the solicitation was posted on July 26, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
FILTER, FLUIDThis contract pertains to the procurement of fluid filters with NSN 2940-01-559-1820 and part number 01542705, managed under solicitation SPE7LX-26-U-9022 for a total quantity of 228 units, each to be delivered within 62 days under FOB origin terms. The purchase is subject to a 0% variance in quantity, with inspection and acceptance occurring at the destination point. Packaging must conform to ASTM D3951 and MIL-STD-129 markings and labeling, with all packaging requirements subordinate to the DLA Master List of Technical and Quality Requirements, which take priority. Unit of issue is each (EA), and palletization must align with DLA Packaging Requirements for Procurement (RP001). The contract is structured as a direct, CONUS delivery under DLA authority and falls under a Total Small Business Set-Aside, with the NAICS code 336390. The estimated quantity is non-binding, and the government is not obligated to purchase the full amount. The point of contact for inquiries is Theodore Misiolek, and responses were due by August 10, 2026, with the solicitation posted on July 26, 2026.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

about 13 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
DIBBS
INDICATOR, FILTER WARNIThis contract specifies the procurement of an Indicator, Filter Warning for aircraft engine applications, with a focus on strict technical and quality compliance. The item, identified by NSN 2945-01-653-4818 and part number 7586631, is classified as a Critical Application Item and must meet all referenced requirements from the DLA Master List of Technical and Quality Requirements, including configuration change management, supply chain traceability documentation per DLA Directive Procurement Note C03, and FAA-specific marking and airworthiness approval standards. Packaging and marking must conform to MIL-STD-2073-1E and MIL-STD-129, with palletization aligned to DLA Packaging Requirements, and no special marking is required. All deliveries are FOB Origin, with inspection and acceptance occurring at the destination, and a fixed quantity of two units is mandated with zero variance allowed. The delivery schedule requires fulfillment within 166 days of award, with an original required delivery date of August 27, 2026, and a needed ship date of January 17, 2027. Sampling and acceptance criteria follow MIL-STD-1916 or ASQ H1331, where critical, major, and minor attributes correspond to verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively, with zero non-conformances required unless otherwise stated. The contract incorporates multiple DLA Procurement Notes including L32, RP001, RP003, RQ002, RQ011, RQ046, and RQ018, all governing quality, preservation, packaging, and traceability. The item is subject to FAA airworthiness approval requirements and must be delivered to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLAD Procurement Notes C19 and C20. The solicitation was issued on July 26, 2026, with a response deadline of August 3, 2026, under contract number SPE4A7-26-T-594V.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 13 hours ago

DEADLINE

in 7 days
View Details
NAICS: 336390
New
Federal
29--FILTER,FLUIDThe U.S. Department of Defense, through DLA Land and Maritime, is soliciting quotes for 228 fluid filters under NSN 2940015591820, with a guaranteed minimum quantity of 34 units. This procurement is conducted as a combined solicitation under the Small Business Administration Total Small Business Set-Aside program, exclusively open to qualified small businesses. The contract, if awarded, may take the form of an indefinite-delivery contract valid for one year or until aggregate orders reach $350,000, with an estimated two orders per year. All items must be shipped to various DLA depots across CONUS and OCONUS via consolidated and containerized shipping points, with delivery required within 62 days of order placement. The only approved source for this item is identified by the supplier code 61080 01542705. The solicitation, numbered SPE7LX26U9022, is posted online with no hard copies available, and all quotations must be submitted electronically by the August 10, 2026 deadline. No specifications, plans, or drawings are provided, and responsible sources are encouraged to submit quotes based on the provided data. Inquiry contact information is available through the listed buyer email, and the full solicitation document can be accessed via the SAM.gov link or the DIBBS website.
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
Federal
29--FILTER BODY,FLUIDThe solicitation seeks quotes for 174 fluid filter bodies under NSN 2910015816417, with an anticipated total order volume of up to 350,000 dollars over a one-year period or until the ceiling is reached, whichever comes first. This procurement is structured as a potential Automated Indefinite Delivery Contract with an annual estimated order count of two and a guaranteed minimum of 26 units. Delivery will be made to multiple DLA depots both within the continental United States and overseas, using consolidated and containerized shipping methods. The approved source for this item is identified as manufacturer 33968 with part number 22926745. This is a total small business set-aside under NAICS code 336390, open only to responsible small business concerns. All quotes must be submitted electronically via the online portal by the deadline of August 10, 2026; no hard copies are available. Specifications, plans, or drawings are not provided, and inquiries should be directed exclusively through the designated email address listed in the solicitation. The contract vehicle will be awarded through SAM. gov under solicitation number SPE7LX26U9020, with no additional documentation beyond the electronic RFQ accessible to bidders.
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 14 days
View Details
NAICS: 336390
New
Federal
29--STARTER,ENGINE,HANDThe solicitation seeks 485 hand engine starters identified by NSN 2990013230307 for delivery to DLA Dist San Joaquin under the code W1A8, with a delivery timeline of 178 days after contract award. Only approved sources—80LX1 714260-76821, KCQ24 CV1987 33, U0CH4 114260-76250, and Z5317 714560-76821—are eligible to respond. The procurement is conducted via a request for quotation with no hard copies available; all submissions must be uploaded electronically. Specifications, plans, or drawings are not provided, and all responsible sources may submit quotes if received by the deadline. The solicitation is set aside exclusively for Women-Owned Small Businesses under NAICS code 336390 and is managed by the DLA Land and Maritime office in Columbus, Ohio. Responses are due by August 6, 2026, with inquiries to be directed to the designated point of contact via email, and the full solicitation document must be accessed online through the provided SAM.gov link.
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details
NAICS: 336390
New
Federal
29--PIPE,EXHAUSTThe contract concerns the procurement of 91 exhaust pipes identified by NSN 2990014144072, with quantities of 14 and 77 units awarded under two separate line items, all to be delivered to W1A8 DLA DIST SAN JOAQUIN within 158 days of award. The item is source controlled, requiring compliance with drawing 34623 12460086, and suppliers must ensure all delivered goods strictly adhere to the specified technical requirements. This is a total small business set-aside under NAICS code 336390, reserved exclusively for small businesses as defined by the SBA. The solicitation is posted electronically under number SPE7L526T4628 with a response deadline of August 6, 2026, and all quotes must be submitted digitally through the designated portal; hard copies are not accepted. The solicitation document, including digitized drawings and specifications, can be accessed via the provided online link, and inquiries should be directed to the designated point of contact by email. The contracting office is located in Columbus, Ohio, under the Department of Defense’s DLA Land and Maritime organization.
DLA Land And Maritime

POSTED

about 18 hours ago

DEADLINE

in 10 days
View Details

More opportunities from Department Of Defense → LAND SUPPLIER OPNS ENGINES

Same awarding agency

NAICS: 333618
New
DIBBS
MANIFOLD, EXHAUSTThe contract pertains to the procurement of an exhaust manifold for Cummins diesel engine model NTC-400, used on M915 through M920 vehicles, identified by NSN 2815-00-920-2073 and part numbers 151478 for Cummins Inc. and MA207 21 147 for AM General LLC. Two units are required to be delivered within 11 days of contract award, with delivery terms FOB origin and no tolerance for quantity variance. Inspection and acceptance occur at the destination. The item is classified as critical, and the use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements unless substitutes are pre-approved. Packaging must comply with ASTM D3951 and MIL-STD-129, with palletization governed by DLA’s packaging requirements, and all DLA Master List technical and quality requirements take precedence. The delivery address is the DLA Distribution facility in New Cumberland, Pennsylvania, consistent with transportation and shipping instructions referenced in DLAD Proc Notes C19 and C20. The original required delivery date was June 26, 2026, with a needed ship date of August 18, 2026, under solicitation SPE7L5-26-T-4625, with responses due by August 6, 2026. The unit of issue is each, priced at $2.00 per unit, totaling $4.00, and the contract falls under NAICS code 333618 with the Department of Defense as the contracting agency.
Other Engine Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 332613
New
DIBBS
SPRINGThis contract, identified under solicitation number SPE7L5-26-T-4623, pertains to the procurement of six units of items associated with NSN 5360-01-169-5457, with a delivery requirement within 130 days after award. The contract is governed by the Department of Defense’s Defense Logistics Agency and falls under the NAICS code 332613, indicating a focus on industrial machinery and equipment manufacturing. All technical and quality requirements referenced in the contract are sourced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for large acquisitions or the award date for simplified acquisitions, unless an amendment supersedes it. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds to any supplied hardware or materials, except for specific functional applications such as batteries, fluorescent lights, certain instruments, sensors, controls, weapon systems, or chemicals explicitly authorized by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and equipped with a secondary containment barrier, in compliance with NAVSEA 5100-003D. The contract also mandates the removal of government identification from any non-accepted supplies. Solicitation responses are due by August 6, 2026, and performance is to be delivered to Greensboro, North Carolina, 27409. Primary point of contact is Randy Ith, reachable via email and phone provided.
Spring Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 326220
New
DIBBS
BELT, VThe contract pertains to the procurement of a V-belt, industrial part number 5L530, with a 5L cross-section and 53 inches effective outside length, designated by NSN 3030-00-528-4622. A total quantity of 24 units is required, to be delivered within 34 days of contract award, FOB origin, with no tolerance for quantity variance. Delivery is specified to the destination warehouse in Tracy, California, with inspection and acceptance also occurring at the destination point. The item is classified as a Type I shelf-life item with a non-extendable shelf life of 72 months, and must be clearly marked with special marking code 32. Packaging must comply with MIL-STD-2073-1E and DLA packaging requirements, including preservation methods, wrapping materials, and unit containers, and all marking must follow MIL-STD-129. Ozone-depleting chemicals are strictly prohibited in any component or manufacturing process, and any substitutions require prior approval. Sampling and quality verification must adhere to MIL-STD-1916 or ASQ H1331 with zero non-conformances required in the sample lot unless otherwise stated, with attributes assigned specific verification levels or AQLs. The Technical Data Package revision A Gen 1 must conform to CID A-A-52490A, and full and open competition applies. The solicitation number is SPE7L5-26-T-4622, with a response deadline of August 6, 2026, and the original required ship date is September 10, 2026.
Rubber and Plastics Hoses and Belting Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333618
New
DIBBS
IDLER, FUEL PUMPThe contract specifies the procurement of an idler gear assembly for a fuel oil pump, designated by NSN 2815-00-103-5340 and part number 9521000, manufactured by Progress Rail Locomotive Inc. for use in GMC 567 series and EMD model 16-645E5LR diesel engines. Nine units are required to be delivered within 11 days FOB origin, with zero variance allowed in quantity, and inspection and acceptance occurring at the destination warehouse in Tracy, California. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including prescribed preservation methods, materials, and unit containment, while prohibiting any mercury or mercury compounds in preservation, packaging, or marking per IP056 and RD004. The item is classified as a critical application item and subject to configuration control under MIL-STD-973, excluding certain subclauses. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with revisions tied to the solicitation or award date depending on acquisition size. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and all marking must conform to MIL-STD-130 section 5.3.1. The delivery address, transportation instructions, and point of contact are fully specified, with the response deadline set for August 6, 2026, and the original required delivery date July 1, 2026.
Other Engine Equipment Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 333611
New
DIBBS
VALVE, PILOT GOVERNORThe contract is for a single unit of a valve, pilot governor, specifically designated for use in an E/I steam turbine with the NSN 2825-01-214-9012 and part number 916395, supplied by either Siemens Government Technologies or Curtiss-Wright Electro-Mechanical Corp. The item is classified as a critical application and a Navy field level reparable, requiring strict configuration control in accordance with MIL-STD-973. All materials must comply with strict prohibitions against Class I ozone-depleting chemicals, which override any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly authorized. Packaging must meet MIL-STD-2073-1E standards with specific preservation methods, wrapping materials, and unit container codes, while labeling follows MIL-STD-129 with no special marking required. Palletization adheres to DLA packaging requirements, and delivery is to be made FOB origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The item must be delivered within 165 days of contract award, with a required ship date of January 19, 2027, and an original delivery deadline of January 1, 2029. The procurement is governed by DLA technical and quality requirements referenced via R and I numbers from the DLA Master List, with the applicable revision determined by the solicitation or award date. The solicitation number is SPE7L5-26-T-4627, issued under NAICS code 333611 by the Department of Defense, with a single unit purchased at a specified unit price and no variance permitted in quantity.
Turbine and Turbine Generator Set Units Manufacturing

POSTED

about 13 hours ago

DEADLINE

in 10 days
View Details
NAICS: 561990
New
DIBBS
Hazardous Materials Compliance & Packaging ServicesThe contract requires comprehensive packaging, labeling, and regulatory documentation services for the Vacuum Bleed Filter, strictly aligned with MIL-STD-2073-1E for defense item packaging, MIL-STD-129 for labeling of military shipments, and the OSHA Hazard Communication Standard to ensure proper identification and handling of hazardous materials. All work must adhere to federal military standards for durability, traceability, and safety in transportation and storage, with particular emphasis on accurate hazard labeling, material safety data sheets, and compliance documentation to support DoD logistics and supply chain integrity. The performance location is specified as New Cumberland, PA, with a zip code of 17070-5002, indicating the need for on-site or locally coordinated fulfillment activities. The solicitation, issued under NAICS code 561990 for other support services, is classified as a subcontract opportunity posted by the Department of Defense under LAND SUPPLIER OPNS ENGINES with a response deadline of July 29, 2026. The contract demands strict adherence to federal regulations governing hazardous materials, requiring the vendor to demonstrate expertise in military packaging protocols and OSHA compliance, including updated SDS formatting, container labeling, and documentation audit readiness. This contract is not subject to a specific set-aside and is accessible through the DIBBS platform, requiring proposals to fully address technical and regulatory obligations to qualify for award.
All Other Support Services

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 332996
New
DIBBS
Vacuum Bleed Filter Supply (NSN: 2990-01-513-6153)The contract specifies the supply of thirteen Vacuum Bleed Filters with part number 23055917-28 and national stock number 2990015136153, manufactured to meet stringent Department of Defense technical, quality, and traceability standards for use in critical aerospace systems. All units must comply with exacting performance and documentation requirements to ensure reliability and safety in high-stakes operational environments. The procurement is classified as a subcontract under NAICS code 332996, indicating it falls under other miscellaneous manufacturing. Performance is required at the specified location in New Cumberland, Pennsylvania, with a zip code of 17070-5002. The solicitation was posted on July 24, 2026, and responses are due by July 29, 2026, with the contract awarded by the Land Supplier Operations Engines division under the Department of Defense. Interested parties must submit proposals through the designated DIBBS portal before the deadline to be considered.
Fabricated Pipe and Pipe Fitting Manufacturing

POSTED

3 days ago

DEADLINE

in 2 days
View Details
NAICS: 541690
New
DIBBS
Quality Inspection and Compliance DocumentationThe contract requires comprehensive in-process and final inspection of rocker arms to ensure full compliance with Federal Acquisition Regulation 52.246-2, mandating rigorous quality control throughout manufacturing stages. All inspection activities must be thoroughly documented to meet audit-ready recordkeeping standards, with detailed records maintained for potential government review and verification. The work is to be performed at the specified place of performance in New Cumberland, Pennsylvania, with zip code 17070-5002, and is classified as a subcontract under NAICS code 541690, indicating it falls within other scientific and technical consulting services. Responses are due by August 8, 2026, and the contract is issued by the Department of Defense through LAND SUPPLIER OPNS ENGINES, emphasizing the critical nature of quality assurance for defense-related components.
Other Scientific and Technical Consulting Services

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
DIBBS
First Destination Transportation (FDT) / Domestic FreightThe contract pertains to the transportation of packaged rocker arms under the Department of Defense’s First Destination Transportation program, requiring movement from an FOB origin point to a destination within the contiguous United States. Performance is specifically designated for New Cumberland, Pennsylvania, with the NAICS code 484220 indicating the scope involves truck transportation of freight. The contractor must comply with DLA’s FDT program requirements, which include using the Wide Area WorkFlow system for electronic reporting throughout the shipment process. This is a subcontract opportunity with a solicitation response deadline on August 8, 2026, and the posting date is July 24, 2026, indicating a standard procurement timeline for planning and bid submission. The contracting activity falls under Land Supplier Operations Engines, a component of the broader Department of Defense logistics infrastructure.
Specialized Freight (except Used Goods) Trucking, Local

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 323111
New
DIBBS
Military-Compliant Marking and LabelingThis contract requires the application of durable, scannable labels and markings in strict compliance with MIL-STD-129 to support military logistics operations and seamless integration with the Wide Area Workflow system. The work must ensure that all markings are legible, weather-resistant, and machine-readable to facilitate accurate tracking and inventory management across the Department of Defense supply chain. The labels and markings must meet all technical specifications for content, placement, and material resilience mandated by the standard to guarantee uninterrupted operational readiness. The solicitation is issued as a subcontract under the NAICS code 323111 for printing and related support activities, with a response deadline of August 8, 2026. Performance is expected to occur at New Cumberland, Pennsylvania, with a zip code of 17070-5002. Although the agency and point of contact details are not provided, the contracting organization is listed as LAND SUPPLIER OPNS ENGINES within the Department of Defense. Participation is open without a specific set-aside designation, and all submissions must adhere to the technical and procedural requirements tied to MIL-STD-129 and WAWF interoperability to be considered.
Commercial Printing (except Screen and Books)

POSTED

3 days ago

DEADLINE

in 12 days
View Details
NAICS: 493190
New
DIBBS
Defense-Compliant Packaging and Preservation ServicesThe contract requires comprehensive packaging and preservation services for rocker arms in strict accordance with MIL-STD-2073-1E standards, covering all aspects of protective wrapping, cushioning, and containerization to ensure survival during military shipment and storage. All procedures must meet rigorous defense-grade requirements for moisture resistance, shock protection, corrosion prevention, and long-term durability under operational conditions. The work is to be performed at the designated place of performance in New Cumberland, PA, with a ZIP code of 17070-5002, and must be completed in alignment with the military’s logistical and supply chain protocols. This is a subcontract opportunity under NAICS code 493190, issued by the Department of Defense through the Land Supplier Operations Engines organization. The solicitation was posted on July 24, 2026, and responses are due by August 8, 2026. Interested parties must ensure full compliance with the federal packaging standard and be prepared to demonstrate capability in handling defense-critical components through certified methods. The contract does not specify set-aside classifications or point of contact details, and all submissions must be routed through the official DIBBS portal linked in the posting.
Other Warehousing and Storage

POSTED

3 days ago

DEADLINE

in 12 days
View Details