Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →

Search

Top

Back to Contracts

Pipe Flange Supply

Active

Federal

Response Deadline08/24/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This subcontract, issued by the Department of Defense under the Maritime Supply Chain agency, is for the supply of 50 pipe flanges. The requirement is structured as a discrete contract line item with a strict zero tolerance policy for quantity variance. This is a supply-only contract, meaning no installation or service work is required. The procurement falls under NAICS code 332913 and specifies Cherry Point as the place of performance. The solicitation was posted on August 13, 2026, with a response deadline of August 24, 2026.

General Info

DoD subcontract for 50 pipe flanges at Cherry Point; supply only, zero variance.

Agency

Department Of Defense → MARITIME SUPPLY CHAINView Agency

NAICS

332913 - Plumbing Fixture Fitting and Trim ManufacturingView NAICS

Place of Performance

CHERRY POINT, NC, 28533-5040, USA

Set-Aside

NONE

Documents

This scope was carved out of SPE7M1-26-T-282J.

The full solicitation package (1 document), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

FLANGE, PIPE

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedAug 13

subcontract

Response DeadlineAug 24

Submission deadline

Response Deadline

08/24/2026, 05:00:00 PM UTCin 8 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → MARITIME SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → MARITIME SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Supply of 50 pipe flanges as a discrete CLIN with zero tolerance for quantity variance. No installation or service work required.

Similar Contracts

Same NAICS industry code

Solicitation # SPE4A5-26-T-359T

This contract is for the procurement of six drain cocks for KC-135 aircraft, identified by NSN 4820006725699 and Parker-Hannifin part number 3-4452-8. The items are designated as critical application items and must be delivered to the DLA Distribution Depot Oklahoma at Tinker AFB. The required delivery date is March 30, 2027, with a delivery window of 171 days. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, palletization, and marking. Quality assurance will be managed through a zero-based sampling plan per MIL-STD-1916 or ASQ H1331. Key compliance requirements include CMMC Level 2 self-assessment, covered defense information protocols, and destination-based inspection and acceptance.

ASC SUPPLIER OPER OEM DIVISION

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7MC-26-T-198L

This contract is for the procurement of drain cocks, identified by NSN 4820011589223, which are critical application items used on light armored vehicles. The requirement consists of two line items totaling 57 units, with 4 units destined for DLA Distribution Albany and 53 units for DLA Distribution San Joaquin. The items are associated with part numbers from Eaton Corp and General Dynamics Land Systems Canada. The delivery timeframe is set at 168 days after the order, with an original required delivery date of December 23, 2026, and a need ship date of February 12, 2027. Shipping is FOB Origin, and inspection and acceptance will occur at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization must follow DLA packaging requirements. Technical and quality standards are governed by the DLA Master List, which takes precedence over other packaging standards.

ALBANY TRANSPORTATION OFFICER

POSTED

about 6 hours ago

DEADLINE

Air Release Valve Supply (Freightliner)The County of Riverside in California is seeking a subcontractor for the supply of air release valves specifically designed for Freightliner vehicle pneumatic systems. This procurement opportunity is categorized under NAICS code 332913 and was officially posted on August 14, 2026. Interested parties must submit their responses by the deadline of September 3, 2026, at 8:30 PM. Further details and submission instructions are available through the Public Purchase portal.

County of Riverside

POSTED

DEADLINE

Pump Manifold and Plumbing SystemThis subcontract, issued by the Lowndes County Board of Commissioners in Georgia, involves the supply and installation of a stainless-steel pump manifold system. The scope of work includes the integration of valves, plumbing, and a centralized control console featuring remote start and throttle capabilities. The project is categorized under NAICS code 332913. Interested parties must submit their responses by the deadline of September 17, 2026, at 3:00 PM. The solicitation was officially posted on August 14, 2026.

Lowndes County Board of Commissioners

POSTED

DEADLINE

in about 1 month

Supply of Grooved Coupling (NSN: 5342012889326)This subcontract involves the procurement of six commercial off-the-shelf grooved couplings under National Stock Number 5342012889326. The items must strictly adhere to military specifications regarding material quality, durability, and traceability. The contract is managed by the Department of Defense through the ASC Supplier Oper OEM Division. The solicitation was posted on August 14, 2026, with a response deadline of August 19, 2026. Classified under NAICS code 332913, the place of performance is designated as FPO 09645-0001.

ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

Packaging and Marking ComplianceThis subcontract, issued by the Defense Logistics Agency under the Department of Defense, focuses on Packaging and Marking Compliance. The contract requires that all packaging adheres to MIL-STD-2073-1E and that markings are applied according to MIL-STD-129. Specifically, items with a three-month shelf life must include Special Marking Code 32. The opportunity was posted on August 14, 2026, with a response deadline of August 25, 2026. It is categorized under NAICS code 332913, pertaining to the manufacturing of other fabricated metal products.

Defense Logistics Agency

POSTED

DEADLINE

DELANY FLUSH VALVE HEAD

Solicitation # SRC0000041274

The Southern Ohio Correctional Facility is soliciting bids for the procurement of Delany flush valve heads. This solicitation, identified as SRC0000041274, was posted on August 14, 2026, and requires responses to be submitted by August 28, 2026, at 6:00 PM. The contract is managed by a state, local, or education agency and will be performed within the state of Ohio. Interested parties can find further details and submission guidelines through the OhioBuys portal.

Drc231600 Southern Ohio Corr Facility Soci

POSTED

DEADLINE

Commercial Butterfly Valve SupplyThis subcontract opportunity is for the supply of commercial off-the-shelf butterfly valves intended for use in fluid control systems. These components will support military aviation or ground support equipment at the DLA Aviation facility located at Tinker AFB in Oklahoma. The procurement is managed by the Department of Defense under the agency Ok DLA Aviation At Oklahoma City, falling under NAICS code 332913. Interested parties must submit their responses by the deadline of September 15, 2026, following the posting date of August 14, 2026.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

High-Pressure Hydraulic & Pneumatic System FabricationThe Department of Defense, through the FA9101 Aedc Pkp Procrmnt Branch, is seeking a subcontractor for the fabrication and integration of high-pressure hydraulic and pneumatic systems. The scope of work focuses on the production of valves, manifolds, and leak-tight fluid systems specifically designed for aerospace applications. This opportunity is categorized under NAICS code 332913 and was posted on August 14, 2026. Interested parties must submit their responses by the deadline of August 19, 2026.

FA9101 Aedc Pkp Procrmnt Branch

POSTED

DEADLINE

Supply of Valves and PipingThis subcontract opportunity with the Department of Agriculture, specifically Csa Southwest 7 Usda-Fs, involves the procurement of specialized piping and valve components for potable water use. The scope of work includes the supply of MSS SP-70 Type I and ASME B16.34 valves, ASTM A 53 galvanized steel pipe, and dielectric fittings, all of which must meet NSF 61 standards. The project is designated as a total Small Business Set Aside under NAICS code 332913. Performance will take place in Prescott, Arizona. Interested parties must submit their responses by the deadline of September 14, 2026.

Csa Southwest 7 Usda-Fs

POSTED

DEADLINE

70/30 Copper-Nickel (CUNI) Pipe Fitting ManufacturingThe Department of Defense Fluid Handling Division is seeking a subcontractor for the manufacture of 1/2 inch nominal pipe size straight socket-weld tees made from 70/30 copper-nickel alloy. All produced components must strictly adhere to MIL-STD-278, ASTM D3951, and MIL-STD-129 standards to ensure technical compliance and quality. This procurement opportunity is categorized under NAICS code 332913 and will be performed in Norfolk. Interested parties must submit their responses by August 24, 2026, following the posting date of August 13, 2026.

FLUID HANDLING DIVISION

POSTED

DEADLINE

MIL-STD-129 Labeling & Packaging ComplianceThis subcontract opportunity with the Department of Defense ASC Commodities Division focuses on the design, application, and maintenance of standardized labels for containers and bare items. The scope of work requires strict adherence to MIL-STD-129 standards, specifically covering the implementation of barcoding, hazardous material warnings, and radiological identification to ensure full packaging compliance. The project will be performed in New Cumberland, Pennsylvania, under NAICS code 332913. Interested parties must submit their responses by August 21, 2026, following the posting date of August 13, 2026.

ASC COMMODITIES DIVISION

POSTED

DEADLINE

More opportunities from Department Of Defense → MARITIME SUPPLY CHAIN

Same awarding agency

MOTOR, DIRECT CURRENT

Solicitation # SPE7M1-26-T-284T

This contract is for the procurement of 14 direct current motors, identified by NSN 6105-01-174-1662 and part number 044832-1 from Simmonds Precision Products Inc. The items are designated as critical application items and must be delivered to the DLA Distribution Depot Hill at Hill AFB, Utah. The delivery timeline is set for 168 days after the order, with a required delivery date of November 20, 2027. The agreement mandates strict adherence to several technical and quality standards, including CMMC Level 2 self-assessment, covered defense information protocols, and specific DLA packaging requirements. Quality assurance will be managed through sampling methods aligned with MIL-STD-1916 or ASQ H1331, with inspection and acceptance occurring at the destination. Packaging must comply with ASTM D3951 and MIL-STD-129, while palletization follows the DLA packaging requirements for procurement.

Motor and Generator Manufacturing

POSTED

about 6 hours ago

DEADLINE

FILTER ELEMENT, INTAKE

Solicitation # SPE7M1-26-T-284A

This contract is for the procurement of 500 intake air cleaner filter elements, identified by NSN 4310-01-460-4598 and part number ELM-0056. The order is managed under solicitation SPE7M1-26-T-284A for the Department of Defense Maritime Supply Chain. Delivery is required within 74 days, with a final required delivery date of November 10, 2026, shipping FOB Origin to the DLA Distribution facility in New Cumberland, Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Key technical requirements include a non-extendable 12-month shelf life and a prohibition on the intentional addition of mercury or mercury-containing compounds, per NAVSEA guidelines. Inspection and acceptance will take place at the destination.

Air and Gas Compressor Manufacturing

POSTED

about 6 hours ago

DEADLINE

REPAIR KIT, COMPRESSOR

Solicitation # SPE7M1-26-T-284X

This contract is a total small business set-aside solicitation issued by the Department of Defense Maritime Supply Chain for the procurement of seven compressor repair kits. The items are identified by NSN 4310-01-535-7281 and part number 377-15911-004 from Johnson Controls Navy Systems, LLC. Delivery is required within 168 days after receipt of order, with a required delivery date of January 9, 2027, and a need ship date of February 12, 2027. The shipment is to be delivered FOB Origin to DLA Distribution San Diego. The contract mandates strict adherence to DLA packaging requirements, including MIL-STD-2073-1 and MIL-STD-129 for marking. It specifically prohibits the intentional addition of mercury or mercury-containing compounds, except for specified functional exceptions. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the order. Inspection and acceptance will take place at the destination.

Air and Gas Compressor Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-283V

This contract, identified as SPE7M1-26-T-283V, is a solicitation from the Department of Defense Maritime Supply Chain for the procurement of four pipe elbows, part number 6901-250, with NSN 4730-01-422-0918. The order is issued under purchase request 7012475080 and requires delivery within five days after the order is placed. The terms specify FOB Origin for delivery, with both inspection and acceptance occurring at the destination. The supplier must adhere to DLA packaging requirements RP001 and ASTM D3951, ensuring all marking and labeling comply with MIL-STD-129. Shipments are to be delivered to the US Naval Base Sasebo in Japan. The contract incorporates specific technical and quality requirements from the DLA Master List and mandates the removal of government identification from any non-accepted supplies.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7M1-26-U-5274

This contract is for the procurement of check valves under solicitation number SPE7M1-26-U-5274 for the Department of Defense Maritime Supply Chain. The requirement specifies an estimated quantity of 328 units of NSN 4820-01-333-1913, which is identified as a critical application item compatible with Oshkosh Defense LLC and Grove U.S. LLC part numbers. Delivery is required within 101 days after the order, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. The agreement mandates strict adherence to DLA packaging requirements, specifically RP001 and ASTM D3951, with marking and labeling performed according to MIL-STD-129. Technical and quality requirements are governed by the DLA Master List, and the contract includes a specific provision for the removal of government identification from any non-accepted supplies. The procurement is managed as a DLA Direct CONUS coverage item.

Industrial Valve Manufacturing

POSTED

about 6 hours ago

DEADLINE

FITTING, LUBRICATION

Solicitation # SPE7M1-26-T-283P

This contract is for the procurement of three lubrication fittings, identified by NSN 4730-01-616-6403 and McMaster-Carr part number 2250K12. The order is managed by the Department of Defense under the Maritime Supply Chain agency with a required delivery date of April 23, 2026, and a delivery window of 20 days after receipt of order. Delivery is set as FOB Destination to the USNS Earl Warren T-AO 207. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129, and requires shipment via the fastest traceable means. Environmental restrictions are in place prohibiting the use of Class I ozone-depleting chemicals and the intentional addition of mercury, except in specific authorized cases. Technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance for the delivery.

Other Metal Valve and Pipe Fitting Manufacturing

POSTED

about 6 hours ago

DEADLINE

TRANSFORMER, POWER

Solicitation # SPE7M1-26-T-284N

This solicitation from the Department of Defense Maritime Supply Chain is for the procurement of one power transformer, identified by NSN 5950-01-071-3798. The contract requires delivery within 168 days after the order is placed and specifies that performance will take place at Hill AFB. The agreement incorporates specific DLA packaging requirements and guidelines for covered defense information. While technical and quality requirements are governed by the DLA Master List, item unique identification is not required for this specific request. The solicitation is listed under NAICS code 335311 and is managed by the Defense Logistics Agency.

Power, Distribution, and Specialty Transformer Manufacturing

POSTED

about 6 hours ago

DEADLINE

Solicitation # SPE7M1-26-T-282X

This contract, identified as SPE7M1-26-T-282X, is a solicitation by the Department of Defense Maritime Supply Chain for the procurement of two piston rings. The items are specified as Rix Industries part number 18-20419-12R1 under National Stock Number 4310-01-706-4138. The required delivery date is August 12, 2026, with a delivery window of 20 days after the order is placed. The shipment is destined for the USS Hyman G Rickover (SSN 795) and must be delivered FOB Destination. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129 standards, with palletization following RP001 requirements. The contract specifies that the items must be shipped via the fastest traceable means and explicitly prohibits the use of parcel post.

Air and Gas Compressor Manufacturing

POSTED

about 6 hours ago

DEADLINE

CONNECTOR, PLUG, FIBER O

Solicitation # SPE7M1-26-T-283B

This contract is for the procurement of three fiber optic plug connectors, identified by NSN 6060017357552 and part number M28876/7-A12P1. The items must adhere to MIL-PRF-28876/7F and are subject to the Qualified Products List or Qualified Manufacturers List. Delivery is required within 154 days, with a need ship date of January 29, 2027, delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California. The agreement mandates strict compliance with DLA packaging and marking standards, specifically MIL-STD-2073-1E and MIL-STD-129. Environmental restrictions are in place prohibiting the use of Class I ozone depleting chemicals and the intentional addition of mercury, except where functionally required by specific NAVSEA standards. Technical and quality requirements are governed by the DLA Master List, and inspection and acceptance will occur at the destination.

Electronic Connector Manufacturing

POSTED

about 6 hours ago

DEADLINE

DISTRIBUTION BOX

Solicitation # SPE7M1-26-T-283M

This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of 29 distribution boxes under National Stock Number 6110-01-665-3331. The contract is designated as a total small business set-aside under NAICS code 335999, with a delivery requirement of 278 days after the order date. Performance is located in Texarkana, Texas, and the primary point of contact is Michael Reese. The agreement incorporates specific DLA packaging and quality requirements as detailed in the DLA Master List. Additionally, the contract mandates the removal of government identification from any non-accepted supplies. Offerors providing alternate parts must submit a complete data package for both the approved and alternate components to be considered.

All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 6 hours ago

DEADLINE

INDICATOR, DIGITAL DISP

Solicitation # SPE7M1-26-T-283R

This solicitation, issued by the Department of Defense Maritime Supply Chain, is for the procurement of 390 digital display indicators under part number 6625-01-295-6411. The items are classified as Commercial Off The Shelf products and must be delivered to Robins Air Force Base within 180 days after the order is placed. Because no existing data is available, alternate offerors are required to submit a complete data package for both approved and alternate parts. The contract is subject to several critical regulatory and technical requirements, including DLA packaging standards, CMMC Level 2 self-assessment for cybersecurity, and specific protocols for items containing batteries and covered defense information. All supplies must comply with the DLA Master List of Technical and Quality Requirements. Interested parties must respond by August 27, 2026, regarding solicitation number SPE7M1-26-T-283R.

Totalizing Fluid Meter and Counting Device Manufacturing

POSTED

about 6 hours ago

DEADLINE

PANEL, POWER DISTRIBUTI

Solicitation # SPE7M1-26-T-284W

This contract is for the procurement of 13 power distribution panels, identified by NSN 6110-01-512-1520 and manufactured by Howell Laboratories Inc. The agreement is managed by the Department of Defense Maritime Supply Chain under solicitation number SPE7M1-26-T-284W. Delivery is required within 168 days, with a need ship date of February 12, 2027, and a final delivery deadline of May 24, 2027. Shipping is designated as FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging and marking standards, including MIL-STD-2073-1E and MIL-STD-129. A critical environmental requirement prohibits the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions such as batteries or sensors as specified by NAVSEA. The items are classified as critical application items, and the contractor must comply with the technical and quality requirements set forth in the DLA Master List.

Semiconductor and Related Device Manufacturing

POSTED

about 6 hours ago

DEADLINE