PIPE, METALLIC

PIPE,METALLIC
PIPE, CARBON STEEL.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
CLASS I OZONE DEPLETING CHEMICALS ARE NOT TO BE
USED NOR INCORPORATED IN ANY ITEMS TO BE
DELIVERED UNDER THIS CONTRACT.THIS PROHIBITION
SUPERSEDES ALL SPECIFICATION REQUIREMENTS BUT
DOES NOT ALLEVIATE ANY PRODUCT REQUIREMENTS.
SUBSTITUTE CHEMICALS MUST BE SUBMITTED FOR
APPROVAL UNLESS THEY ARE AUTHORIZED BY THE
SPECIFICATION REQUIREMENTS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
"THIS ITEM HAS BEEN INCLUDED IN THE NAVY'S
SPE7M4-26-T-407H
SECTION B
INDUSTRIAL MATERIAL IMPROVEMENT PROGRAM.
MARKING IS REQUIRED IN ADDITION TO THAT
CALLED OUT IN THE PROCUREMENT SPECIFICATION.
THE FOLLOWING INFORMATION IS TO BE CONTINUOUSLY
MARKED EVERY THREE FEET ON EACH LENGTH OF
MATERIAL.
1. PRODUCER'S NAME AND TRADEMARK
2. SPECIFICATION
3. COMPOSITION/TEMPER (WHEN APPLICABLE: GRADE,
TYPE, ALLOY, CLASS, TEMPER, ETC.)
4. SIZE (O.D. OR NPS AND WALL THICKNESS OR
SCHEDULE).
5. CONTRACT NUMBER
6. NATIONAL STOCK NUMBER
7. "S" FOR SEAMLESS OR "W" FOR WELDED
8. HEAT NUMBER OR LOT NUMBER
WHEN MARKING IS APPLIED BY A SUPPLIER OR CUT
INTO SHORTER LENGTHS FOR RESALE THE NAME OR
TRADEMARK OF THE SUBSEQUENT PROCESSOR SHALL BE
INCLUDED IN THE MARKING."
FULL AND OPEN COMPETITION APPLY
ASTM..................CODE: 81346
AMERICAN SOCIETY FOR TESTING AND MATERIALS
1916 RACE STREET
PHILADELPHIA PA 19103
TELEPHONE: 610-832-9500
TELEFAX: 610-832-9555
SPECIFICATION
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
TDP Rev A Gen 1 IAW BASIC NON GOVT STD ASTM A106/A106M REVISION NR M DTD 11/01/2015 PART PIECE NUMBER:
TDP Rev A Gen 1 IAW REFERENCE DRAWING NR 16236 4710V0833 REVISION NR DTD 06/15/1995 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7018270743 0001 FT 2,188.000
NSN/MATERIAL:4710008925914
SPE7M4-26-T-407H
SECTION B
PR: 7018270743 PRLI: 0001 CONT’D
DELIVERY (IN DAYS):0165
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 10% MINUS 10%
INSPECTION POINT: ORIGIN
ACCEPTANCE POINT: ORIGIN
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:BLK PRES MTHD:BL CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:D
UNIT CONT:ZZ OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
EXCEPTION: STD PIPE 1.5 IN. AND SMALLER DOES NOT REQUIRE BUNDLING. LARGER PIPE SHALL REQUIRE A SUITABLY SECURED BUNDLE. EA. MASTER LIFT SHALL BE LIMITED TO 2000 LBS. GR. WT. USE OF WOOD BOX IS OPTIONAL.
PARCEL POST ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN RD
REC WHSE 57
TRACY CA 95304-5000
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W62G2T
W1A8 DLA DIST SAN JOAQUIN
25600 S CHRISMAN ROAD
25600 S CHRISMAN RD REC WHSE 57
TRACY CA 95304-5000
US
Need Ship Date:03/09/2027 Original Required Delivery Date:04/16/2027
SPE7M4-26-T-407H NSN/Part Number: 4710-00-892-5914 Quantity: 2,188 FT Purchase Request: 7018270743QTY: 2188 Delivery: 165 days ADO