This Solicitation opportunity from Department Of Defense was posted on May 14, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PISTON, RACK

Closed

SPE4A5-26-T-143BFederal

Submission Closed05/22/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336412

New

DIBBS

SHAFT, TURBINE, AIRCRThe contract pertains to the procurement of six turbine shafts for aircraft, identified by the National Stock Number 2840-00-837-2071. The solicitation, issued by the Defense Logistics Agency under the Department of Defense, was posted on June 15, 2026, with a response deadline of June 18, 2026. This solicitation, referenced under number SPE4A5-26-Q-0573, aims to source these critical components to support military aircraft operations. The contract is categorized as a federal solicitation without any specified set-aside for particular business types or NAICS code. The place of performance details and specific contact information are not provided in the available data, but the procurement is managed through official Defense Logistics Agency channels. Interested parties could access further information or submit responses via the provided DLA Bid Board System link.

Defense Logistics Agency

POSTED

DEADLINE

29--HOUSING,OIL PUMP ASSEMThis contract involves the procurement of seven units of oil pump assembly housings, identified by NSN 2995004838668, to be delivered to the DLA Distribution Center at Cherry Point within 81 days after order. The solicitation is open as a Request for Quote (RFQ) and is available exclusively through an online portal, with no hard copies, specifications, plans, or drawings provided. Only quotes from approved sources, specifically those with codes 00198 3015676 and 98247 3015676, will be considered, although all responsible sources are encouraged to submit their quotes electronically by the deadline. The contract is issued by the Department of Defense's DLA Aviation office located in Richmond, Virginia, and is set aside entirely for small businesses under the Total Small Business Set-Aside program consistent with FAR 19.5 regulations. The associated NAICS code is 336412, indicating a manufacturing classification. The solicitation was posted on June 15, 2026, with quotes due no later than June 18, 2026. Interested parties can direct questions to the designated point of contact via email and can access the solicitation details through the provided online link.

POSTED

DEADLINE

Production of Cone Exhaust Aircraft ComponentsThis contract involves the manufacture and delivery of cone exhaust components for aircraft under a firm-fixed-price arrangement, with tiered quantities ranging from 1 to 45 units divided into four purchase brackets (1–10, 11–25, 26–35, and 36–45 units). The scope focuses specifically on producing these aircraft parts to meet the Department of Defense’s requirements, facilitated through the Ok DLA Aviation office located in Oklahoma City. The contract is categorized under NAICS code 336412, which pertains to aircraft manufacturing. The solicitation was posted on June 15, 2026, with responses due by June 30, 2026. The place of performance is identified as Brownsburg, though some location details remain unspecified. This subcontract calls for a reliable supplier capable of meeting strict quality and delivery standards to support ongoing aerospace production needs. The absence of a set-aside designation suggests this opportunity is open to all eligible contractors within the aerospace manufacturing industry.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

F110 CASE AND VANE ASSEM (AMC 3R)The contract pertains to the procurement of F110 engine components specifically designated as "CASE AND VANE ASSEM," with the associated part number 2214M15G06 and National Stock Number 2840-01-687-6045. These assemblies house multiple stages of variable and fixed high-pressure compressor stator vanes, feature dimensions measuring approximately 21.6 inches in length, 27.9 inches in width and height, and weigh 190 pounds. The government's best estimate is to acquire 32 units, with a potential procurement range from 8 to 48 units, and delivery is scheduled by December 31, 2027. Shipping is directed to location SW3211, and the solicitation is identified under RFP number SPRTA1-26-R-0335 with the solicitation released on July 1, 2026, and responses due by July 31, 2026. This procurement is set as a limited competition action under FAR 6.302 due to GE Aviation being the sole known capable source, which holds CAGE code 07482. The government intends to solicit only a limited number of sources and reserves discretion over conducting competitive procurement based on received interest. The solicitation will be managed electronically, with no telephone requests accepted, and written or faxed inquiries must be directed only to authorized contacts. The contract is not acquired under FAR Part 12 for commercial items, yet potential vendors have 15 days from the notice to express interest in providing commercial items. An Ombudsman is available to address concerns confidentially during the proposal phase but will not participate in evaluation or selection processes. The contracting office managing this solicitation is located at Tinker AFB, Oklahoma City, under the Department of Defense’s DLA Aviation office. All related information and the solicitation document will be accessible via sam.gov.

Ok DLA Aviation At Oklahoma City

POSTED

DEADLINE

First Article Testing for Cone Exhaust Aircraft ComponentThis contract involves conducting first article testing (FAT) to verify the design, materials, and manufacturing processes of a cone exhaust component used in aircraft. The primary objective is to ensure that the component meets specified quality and performance standards through comprehensive testing. Upon completion, detailed test reports and technical data must be submitted for government review and approval, confirming the component's compliance with required specifications. The subcontract opportunity, issued by the Department of Defense through the Ok DLA Aviation office in Oklahoma City, pertains to the aerospace industry under NAICS code 336412. The work is to be performed in Brownsburg, with a response deadline set for June 30, 2026. This contract is critical to validating component reliability and manufacturing integrity in support of military aviation operations.

Ok DLA Aviation At Oklahoma City

POSTED

2 days ago

DEADLINE

in 14 days

AI Contract Overview

The contract is for the procurement of 13 units of a piston rack, identified by NSN 2915-00-673-9619, to be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania. The contract specifies a delivery timeline of 171 days from the award date, with a required ship date of November 10, 2026, and a final delivery date by March 3, 2027. Inspection and acceptance will occur at the destination. Packaging must conform to ASTM D3951 standards, MIL-STD-129 marking and labeling, and DLA-specific packaging requirements to ensure proper handling and transportation. The item is a critical application part manufactured potentially by metal casting, which may involve specialized tooling, and the government may assist with tooling queries. Quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with specified sampling plans consistent with MIL-STD-1916 or equivalent zero-based plans, emphasizing different verification levels for attributes. The contract includes cybersecurity provisions requiring a Cybersecurity Maturity Model Certification (CMMC) Level 2 self-assessment. The contract also addresses the removal of government identification from non-accepted supplies and excludes the need for Item Unique Identification per customer request. Contact information and assistance for casting and forging processes are provided, and the contract is managed under the Department of Defense with key administrative and technical contacts listed for support.

General Info

Procurement of 13 piston racks, delivery by March 2027, ASTM packaging, CMMC Level 2 required.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

336412 - Aircraft Engine and Engine Parts Manufacturing View NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE4A5-26-T-143B.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedMay 14

Solicitation

Response DeadlineMay 22

Deadline has passed

Submission Closed

05/22/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUS

Organization / Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUS

Contacts

DOMINIQUE HOWARD

contact@example.gov

+1 (555) 000-0000

Full Description

PISTON,RACK
PISTON, RACK
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RT001: MEASURING AND TEST EQUIPMENT
A metal casting process was identified as a means to manufacture this item. Tooling is required to produce a casting. For sourcing, tooling, materials or other information, please contact the appropriate assistance team: (Aviation, C<(>&<)>E Supply Chains) https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/; (Land & Maritime Supply Chains) DSCC.cast.forge@dla.mil. --
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT. --Casting/forging may be required to manufacture this NSN and tooling is typically involved. The government may not have this special tooling. For sourcing, tooling, materials or other information, please submit a Casting and Forging Assistance Request at either https://www.dla.mil/Aviation/Offers/Engineering/Forging-and-Casting/ or Land & Maritime Supply Chains DSCC.cast.forge@dla.mil.
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2
SPE4A5-26-T-143B
SECTION B
Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RQ017: PHYSICAL INDENTIFICATION/BARE ITEM MARKING
CRITICAL APPLICATION ITEM
HONEYWELL INTERNATIONAL INC 06848 P/N 335087
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7016785090 0001 EA 13.000
NSN/MATERIAL:2915006739619
DELIVERY (IN DAYS):0171
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
SPE4A5-26-T-143B
SECTION B
PR: 7016785090 PRLI: 0001 CONT’D
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:11/10/2026 Original Required Delivery Date:03/03/2027
SPE4A5-26-T-143B NSN/Part Number: 2915-00-673-9619 Quantity: 13 EA Purchase Request: 7016785090QTY: 13 Delivery: 171 days ADO