Psst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveCLEATUS Webinar: AI for Government Contracting — Free Webinar — Wednesday, August 5 at 2:00 PM EDT

Register Free →

Get CLEATUSFree Trial

Get CLEATUSFree Trial

Search

Top

Back to Contracts

Plastic Container Manufacturing (Component Supply)

Active

Federal

Response Deadline08/04/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract requires the manufacture of 12,260 five-gallon polyethylene plastic containers equipped with 38 mm caps, specifically designed for water storage and to be delivered clean and dry. All units must fully comply with military packaging standards and FDA regulations for direct water contact, ensuring safety and suitability for defense-related use. The scope emphasizes strict adherence to material and finish specifications to meet operational and hygiene requirements for long-term storage and transit under austere conditions. This is a subcontract under the Department of Defense, managed by the Subsistence FSE Supply Chain, with the NAICS code 326113 indicating classification within plastic packaging manufacturing. The solicitation was posted on July 29, 2026, with a response deadline of August 4, 2026, and is accessible through the DIBBS platform. There is no specified set-aside designation, and performance location details are not provided, implying flexibility in production and delivery logistics as long as compliance and delivery timelines are met.

General Info

Manufacture 12,260 clean, dry five-gallon polyethylene water containers compliant with military and FDA standards.

Agency

Department Of Defense → SUBSISTENCE FSE SUPPLY CHAINView Agency

NAICS

326113 - Unlaminated Plastics Film and Sheet (except Packaging) ManufacturingView NAICS

Place of Performance

US

Set-Aside

NONE

Documents

(0)

No documents available

AI Contract Breakdown

Uniform Contract Format

No contract breakdown available.

Cannot generate Contract Breakdown because no documents were found from this contract's source.

Timeline

PostedJul 29

subcontract

Response DeadlineAug 4

Submission deadline

Response Deadline

08/04/2026, 05:00:00 PM UTCin 4 days

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more

AgencyDepartment Of Defense → SUBSISTENCE FSE SUPPLY CHAIN

ContactsNo contacts available

OfficeN/A

Organization / Agency

Department Of Defense → SUBSISTENCE FSE SUPPLY CHAIN

View Agency Profile

Office AddressN/A

ContactsNo contact information available

Full Description

Show more

Manufacture 12,260 five-gallon polyethylene plastic containers with 38 mm caps suitable for water storage, clean and dry upon delivery, compliant with military packaging and FDA standards for water contact.

Similar Contracts

Same NAICS industry code

Commercial Plastic Sheet Sourcing (Non-Prime Manufacturer)The Defense Logistics Agency is seeking qualified non-prime manufacturers to competitively supply Type I blue plastic sheet material under a subcontract solicitation posted on July 28, 2026, with responses due by August 10, 2026. The material must meet specific technical standards and is intended for performance at Point Mugu, Naval Air Warfare Center, with a zip code of 93042-0001. The solicitation targets suppliers who can demonstrate a clear price variance compared to existing vendors, incentivizing cost-effective alternatives without compromising quality. The NAICS code 326113 indicates this pertains to plastics product manufacturing, and while no set-aside preferences are specified, bidders must be prepared to provide evidence of production capability, compliance with material specifications, and competitive pricing to be considered. All proposals must be submitted through the DIBBS portal linked in the solicitation.

Defense Logistics Agency

POSTED

DEADLINE

Plastic Sheet Supply (Type I, Blue, 10" x 20" x 0.005")The contract pertains to the supply of 87 units of military-spec blue plastic sheet material designated as Type I with the National Stock Number 9330010710731, adhering to Defense Logistics Agency technical standards. Each sheet measures 10 inches by 20 inches with a thickness of 0.005 inches and is intended for use in defense-related applications requiring durable, standardized plastic components. The solicitation was posted on July 28, 2026, with a response deadline set for August 10, 2026, and is structured as a subcontract under NAICS code 326113, which covers plastic product manufacturing. Performance of the contract is required at Point Mugu Naval Air Warfare Center, California, with a zip code of 93042-0001. The contracting activity originates from the Defense Logistics Agency under the Department of Defense, though no specific point of contact or set-aside designation is provided. Interested parties must submit proposals via the official DIBBS portal before the stated deadline.

Defense Logistics Agency

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3700

The contract pertains to the procurement of a specific plastic sheet identified by NSN 9330-01-071-0731, characterized as Type I, blue on both sides, measuring 10 inches wide, 20 inches long, and 0.005 inches thick. The item is being acquired under fully competitive procedures in compliance with applicable military and federal specifications, and the technical and quality standards referenced are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition type. Two units are required, with delivery expected within 20 days after contract award, and the purchase request number is 7017639156. The solicitation, identified as SPE8E5-26-T-3700, was posted on July 28, 2026, with a response deadline of August 10, 2026, and is managed by the Defense Logistics Agency under the Department of Defense. The North American Industry Classification System code is 326113, indicating the nature of the industry involved. Performance of the contract will occur at Point Mugu NAWC with ZIP code 93042-0001. The primary point of contact is Brandon Wicker, reachable via email and phone, and the solicitation can be accessed through the official DIBBS portal. The plastic sheet must adhere to DLA packaging and identification requirements, including the removal of government identification from non-accepted supplies as stipulated in the referenced documents.

Defense Logistics Agency

POSTED

DEADLINE

Plastic Sheet Material Supply (Hair Cell Finish, 94"x54", 0.047" Thick)The contract requires the supply of 634 sheets of plastic material with precise dimensional and surface finish specifications, identified by NSN 9330-01-044-0456 and Part No. 57-8163, featuring a hair cell finish, measuring 94 inches by 54 inches, and 0.047 inches in thickness. This deliverable is the sole core requirement under CLIN 0001 and must meet strict quality standards for use in defense applications. The solicitation is structured as a subcontract under a Total Small Business Set-Aside, as defined by the SBA and FAR 19.5, ensuring only small businesses are eligible to respond. The NAICS code 326113 applies, classifying the industrial category as plastic board, sheet, and film manufacturing. The contract was posted on July 23, 2026, with responses due by August 3, 2026, and performance is to be completed at Tinker Air Force Base, Oklahoma, with a zip code of 73145-8000. The awarding agency is the Department of Defense, specifically under Depot Oklahoma, indicating the material is destined for military logistics or maintenance operations. While no point of contact is listed, the official solicitation can be accessed via the DIBBS system at the provided URL. The set-aside designation and specific technical requirements emphasize the need for qualified small businesses capable of consistently producing high-precision plastic sheeting to federal standards.

POSTED

DEADLINE

Solicitation # SPE8E5-26-T-3683

The contract specifies the procurement of a plastic sheet measuring 94 inches in length, 54 inches in width, and 0.047 inches in thickness with a hair cell finish, identified by part number 57-8163 and NSN 9330-01-044-0456. It is designated as a critical application item and subject to defense information protections, requiring strict compliance with DLA packaging and technical requirements outlined in RP001 and RA001, which reference the DLA Master List of Technical and Quality Requirements. The material must be packaged in accordance with ASTM D3951 if non-hazardous or FED-STD-313 with TQ requirement IP025 if hazardous, with all packaging labeled per MIL-STD-129 and palletized per RP001. The unit of issue is SH, with a required quantity of 634 units, delivered FOB origin to Tinker AFB, Oklahoma, with no variance allowed in quantity. Delivery is scheduled within 81 days of the contract award, with an original required delivery date of November 21, 2026, and a need ship date of July 8, 2026. Inspection and acceptance occur at the destination, and the item is part of a total small business set-aside under NAICS code 326113. The contract number SPE8E5-26-T-3683 is active with a solicitation posting date of July 23, 2026, and a response deadline of August 3, 2026. Transportation and shipping instructions are governed by DLA procedural notes C19 and C20, and all packaging and labeling must align with the specified DLA standards, overriding any commercial practices. The point of contact for this solicitation is Khue Nguyen, with all communication and documentation administered through DLA Oklahoma.

POSTED

DEADLINE

Supply of Plastic Sheets (NSN 9330002023642)The contract requires the manufacture and delivery of plastic sheets conforming to military specifications under the National Stock Number 9330002023642, with full compliance including proper labeling, packaging, and adherence to hazardous material handling standards. The work must be performed in accordance with stringent defense requirements, ensuring product integrity and safety throughout the supply chain. The place of performance is designated as Robins Air Force Base, Georgia, with a response deadline of August 3, 2026, and the solicitation was posted on July 22, 2026. This is classified as a subcontract under NAICS code 326113, which pertains to plastic material and product manufacturing, and is administered by the Department of Defense through the Construction & Equipment MRO SVC I organization. All deliverables must meet exacting military criteria and be prepared for direct use in defense operations.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Precision Acrylic Plastic Sheet Manufacturing & SupplyThe contract calls for the manufacture and supply of 13 precision-cut clear acrylic plastic sheets, each measuring 60 inches by 36 inches with a thickness of 0.750 inches, strictly conforming to the military specification MIL-PRF-5425E Revision E published in 2019. These sheets are intended for critical applications requiring high optical clarity, dimensional stability, and environmental resilience, and must be sourced exclusively from a manufacturer listed on the Defense Logistics Agency’s Qualified Products List to ensure compliance with defense-grade standards. All units must undergo rigorous quality verification to meet the exacting requirements of the specification, including optical transmission, surface finish, and material purity benchmarks. The contract is classified as a subcontract under the NAICS code 326113, targeting plastic sheet and film manufacturing, and is administered by the Department of Defense under the Construction & Equipment MRO SVC I organization. The place of performance is designated as New Cumberland, Pennsylvania with a ZIP code of 17070-5002. The solicitation was posted on July 22, 2026, and responses are due by August 3, 2026, creating a narrow window for qualified suppliers to submit proposals. The contract remains open to any eligible subcontractor meeting the QPL and specification criteria, with no set-aside designation applied, and the official solicitation can be accessed through the DIBBS portal.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3199

The contract is for the procurement of 13 shipping units of clear acrylic plastic sheeting measuring 60 inches long by 36 inches wide and 0.750 inches thick, identified by NSN 9330-00-483-3433. The product must meet the technical specifications of MIL-PRF-5425E Revision E dated August 22, 2019, and be sourced from a manufacturer already approved on the Qualified Products List at the time of contract award. The sheeting is classified as a critical application item and must comply with all DLA packaging and quality requirements referenced in the DLA Master List of Technical and Quality Requirements. Mercury and mercury-containing compounds are strictly prohibited from intentional addition or direct contact with the product, except for specific permitted uses such as batteries, fluorescent lighting, instruments, sensors, controls, weapon systems, or chemical reagents approved by NAVSEA; any portable lamps or instruments containing mercury must be shockproof and feature a secondary containment barrier as per NAVSEA 5100-003D. Delivery is required FOB origin within 167 days of contract award, with an original delivery date of December 3, 2026, and a needed ship date of January 18, 2027. The quantity is fixed with zero variance allowed. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging requirements, avoiding plastic as wrapping, cushioning, or dunnage whenever possible. Marking shall conform to MIL-STD-129 with no special marking code applied. All shipments must be palletized in accordance with DLA standards and sent to the designated delivery address in New Cumberland, Pennsylvania. Inspection and acceptance occur at the destination. The contract is governed under solicitation SPE8E9-26-T-3199, with a response deadline of August 3, 2026, and is issued under NAICS code 326113. Point of contact for inquiries is Matthew Kruc, DLA.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3198

The contract calls for the procurement of plastic sheets made of cellulose acetate, compliant with specification L-P-504, Type 1, characterized by a clear, high polish finish, with nominal dimensions of 20.000 inches in width, 0.060 inches in thickness, and 50.000 inches in length. Each sheet must be packaged in containers marked with the instruction “STORE FLAT KEEP COOL AND DRY” on at least one side and wherever practicable on two opposite sides. The material is identified by NSN 9330-00-202-3642 and is being procured under solicitation SPE8E9-26-T-3198 for a total quantity of 111 sheets, with a purchase request number of 7017585375 and a delivery deadline of 84 days after order. Packaging and labeling requirements adhere strictly to government standards, including the mandatory removal of any government identification from non-accepted supplies. All sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1, or an equivalent zero-based sampling plan unless otherwise directed. Critical, major, and minor attributes must be verified at levels VII, IV, and II respectively, or with AQLs of 0.1, 1.0, and 4.0; unspecified attributes are treated as major. The manufacturer may elect either attribute or variable inspection under MIL-STD-1916 unless the contract specifies otherwise. MIL-STD-105/ASQ Z1.4 may determine sample size but acceptance requires zero non-conformances. The product must also comply with MIL-STD-130N for identification marking of U.S. military property. The solicitation was posted on July 22, 2026, with responses due by August 3, 2026, under NAICS code 326113, issued by the Department of Defense under the Construction & Equipment MRO SVC I office, with performance location at Robins AFB, Georgia, and primary point of contact Matthew Kruc.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of 5-Gallon Poly Drums (UN Rated)The contract calls for the supply of 5-gallon polyethylene drums certified to UN 1H2/Y30/S standards, specifically designed for the safe containment and transportation of small volumes of hazardous or regulated liquids. These drums must meet rigorous international packaging requirements for compatibility, impact resistance, and leak-tight performance under transport conditions, ensuring compliance with global shipping regulations for chemical and industrial materials. The requirement is part of a subcontract under the Defense Logistics Agency, which operates under the Department of Defense, indicating the drums will support military, logistical, or defense-related operations requiring secure liquid handling. The solicitation is classified under NAICS code 326113, which corresponds to plastic packaging and container manufacturing, confirming the focus on production quality and material specifications. The contract was posted on July 20, 2026, with no set-aside provisions specified, meaning any qualified supplier may compete. Performance location details and point of contact information are not provided, but the official award reference is linked through the DIBBS system, where award details and delivery directives can be accessed. The UN certification is non-negotiable, and adherence to this standard is critical for regulatory compliance and transport safety.

Defense Logistics Agency

POSTED

DEADLINE

Supply of 30-Gallon Poly Drums (UN Rated)The contract is for the supply of 30-gallon polyethylene drums certified to UN 1H2/Y180/S standards, ensuring compliance with international regulations for the safe storage and transport of liquids, particularly hazardous materials. These drums are designed to meet rigorous structural and performance requirements for durability, leak resistance, and compatibility with a range of chemical substances, making them suitable for military and defense logistics applications. The specification indicates strict adherence to UN certification, which governs packaging integrity under various conditions including stacking, drop testing, and pressure exposure. This is a subcontract awarded by the Defense Logistics Agency under the Department of Defense, with the NAICS code 326113 indicating classification within plastics product manufacturing. The contract was posted in July 2026 and is tied to the procurement system used by DLA for sourcing critical packaging solutions. Performance locations and detailed contact information are not specified, but the procurement is linked to the DIBBS system under contract numbers SP450025D0013 and SP450026F6551, suggesting it is part of a broader logistical effort to maintain standardized, certified containment units across defense supply chains.

Defense Logistics Agency

POSTED

DEADLINE

Flexible Pouch Packaging and Filling Services

Defense Logistics Agency

POSTED

DEADLINE

More opportunities from Department Of Defense → SUBSISTENCE FSE SUPPLY CHAIN

Same awarding agency

Unable to Retrieve Contract Data

POSTED

DEADLINE

Small Business Subcontracting & Socioeconomic ComplianceThe contract requires support to a prime contractor in achieving small business subcontracting goals by actively engaging with and sourcing services from qualified disadvantaged and veteran-owned businesses, including Women-Owned Small Businesses, Economically Disadvantaged Women-Owned Small Businesses, Service-Disabled Veteran-Owned Small Businesses, and HUBZone firms. The scope includes developing outreach strategies to connect with these entities, ensuring meaningful participation in subcontracting plans, and maintaining full compliance with Federal Acquisition Regulation requirements for socioeconomic reporting and documentation. All activities must align with the prime contractor’s obligations under the contract to meet targeted small business utilization benchmarks. Performance is centered around the FPO area with a ZIP code of 09532, under the auspices of the Department of Defense’s Subsistence FSE Supply Chain organization. The solicitation, classified as a subcontract under NAICS code 541611 for Management Consulting Services, was posted on July 29, 2026, with a response deadline of August 3, 2026. There is no applicable set-aside designation, but adherence to all applicable federal regulations regarding socioeconomic reporting and subcontracting plan execution is mandatory. The successful bidder must demonstrate expertise in navigating federal contracting compliance frameworks and have a proven ability to identify and collaborate with certified small business entities across diverse markets.

Administrative Management and General Management Consulting Services

POSTED

DEADLINE

Cybersecurity Compliance (NIST SP 800-171)The contract requires contractors to ensure their information systems comply with NIST SP 800-171 and DFARS 252.240-7997 to protect covered defense information, mandating the implementation of specific security controls to safeguard sensitive data handled in support of Department of Defense activities. Compliance is non-negotiable and must be fully achieved prior to contract performance, with systems subject to ongoing assessment and continuous adherence to the outlined cybersecurity standards. This is a subcontract opportunity under NAICS code 541512, issued by the Subsistence FSE Supply Chain under the Department of Defense, with performance required at FPO 09532. The solicitation was posted on July 29, 2026, and responses are due by August 3, 2026. Contractors must possess the technical capability and administrative infrastructure to meet federal cybersecurity requirements, including documentation, logging, access controls, incident response, and system monitoring as defined by NIST and DFARS. No set-aside information is provided, indicating the contract is open to all qualified eligible entities.

Computer Systems Design Services

POSTED

DEADLINE

WAWF & Invoice Processing SupportThis contract requires support for WAWF data entry, delivery verification, invoice submission, and resolution of payment discrepancies to ensure timely and accurate compensation under the terms of the agreement. The work is focused on maintaining compliance with Department of Defense financial and logistics procedures, specifically within the subsistence supply chain, and involves direct interaction with defense logistics systems to process transactions related to deliveries and invoicing. The contract is structured as a subcontract under NAICS code 561400, which classifies it as administrative and support services, and performance is expected to occur at FPO with a ZIP code of 09532. Proposals must be submitted by August 3, 2026, following a posting date of July 29, 2026, and the solicitation number is SPE3SE26T1076, accessible through the DIBBS system.

POSTED

DEADLINE

Military-Compliant Packaging ServicesThe contract requires the provision of packaging services that strictly comply with ASTM D3951 and the DLA Master List standards, ensuring all materials are durable, resistant to environmental stressors, and fully traceable for military supply chains. This subcontract is focused on supporting naval delivery operations, demanding that packaging meet rigorous defensive and logistical specifications to maintain integrity under demanding conditions throughout transit and storage. All work must be performed in alignment with the specified military compliance requirements, with performance centered on the FPO address 09532. The solicitation, posted on July 29, 2026, closes for responses on August 3, 2026, under NAICS code 561910 for other support activities for transportation. The awarding entity is the Department of Defense under the Subsistence FSE Supply Chain organization, and the contract is open to qualified subcontractors seeking to fulfill specialized packaging needs for defense logistics.

Packaging and Labeling Services

POSTED

DEADLINE

Hazardous Materials Packaging & Labeling ComplianceThe contract requires full compliance with federal regulations governing hazardous material handling, specifically OSHA’s Hazard Communication Standard (29 CFR 1910.1200), the Defense Federal Acquisition Regulation Supplement clause DFARS 252.223-7001, and MIL-STD-129 for labeling and packaging. All shipments must be properly documented with accurate Safety Data Sheets prepared in accordance with GHS standards and labeled to meet military and civilian safety requirements. The work involves ensuring that all hazardous materials are packaged, marked, and labeled correctly for transport and storage, with strict adherence to Department of Defense protocols for accountability and safety. The place of performance is designated as FPO with a ZIP code of 09532, indicating operations will support military logistics in a deployed or overseas environment. This subcontract, classified under NAICS code 541690, is part of the Subsistence FSE Supply Chain initiative under the Department of Defense and is open for response until August 3, 2026. The solicitation does not specify a set-aside status and is intended for qualified contractors capable of managing the full lifecycle of hazardous material documentation, labeling, and regulatory compliance. All parties must demonstrate proven experience with military supply chain standards and the ability to generate and maintain compliant SDS and labeling systems under stringent federal and defense requirements. No point of contact is listed in the data, and the submission must be made through the DIBBS portal at the provided link.

Other Scientific and Technical Consulting Services

POSTED

DEADLINE

Supply of Repair Parts & Accessories KitsThe contract calls for the manufacture, assembly, or sourcing of repair parts, accessories, and tool kits identified by NSN 4110016273849 for delivery to the USS DWIGHT D EISENHOWER CVN 69. All work must adhere strictly to applicable military specifications to ensure compatibility, durability, and operational readiness in a naval environment. The required items must be fully prepared and delivered within 20 days after delivery order issuance, with performance centered at FPO, ZIP 09532, to support the ship’s maintenance and operational needs. This is a subcontract under the NAICS code 336413, indicating involvement in the ship and boat building and repairing industry, managed by the Department of Defense through the SUBSISTENCE FSE SUPPLY CHAIN. The solicitation was posted on July 29, 2026, with a firm response deadline of August 3, 2026, requiring timely submission of proposals that demonstrate capacity to meet rigorous military standards and tight delivery timelines. Participation is open without specific set-aside restrictions, and vendors must be prepared to fulfill the exact requirements outlined in the technical and logistical specifications for the NSN.

Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

DEADLINE

Extension Cord SupplyThe contract calls for the supply and delivery of 119 heavy-duty extension cords, each rated at 110 VAC, 50 feet in length, and constructed with 12-gauge wire, featuring a NEMA 5-15 plug and receptacle. The cords are manufactured by Dometic Marine Canada Inc. under part number MS0400 and are intended for use in military subsistence supply operations. The solicitation is classified as a subcontract under NAICS code 335931, indicating it relates to the manufacturing of other electrical equipment and equipment parts. The opportunity was posted on July 29, 2026, with responses due by August 5, 2026, indicating a short, seven-day window for proposal submission. The contracting activity is administered by the Department of Defense through the Subsistence FSE Supply Chain, with performance expected to support defense logistics operations, though no specific delivery location is provided. All bids must be submitted through the DIBBS platform at the provided URL.

Current-Carrying Wiring Device Manufacturing

POSTED

DEADLINE

Packaging and Palletization ServicesThe contract requires final packaging, labeling, and palletization of assembled water container kits in strict compliance with MIL-STD-2073-1E and DLA RP001 standards, ensuring all procedures meet military logistics requirements. Essential elements include the application of GS1-128 or Data Matrix barcodes for accurate tracking and inventory management, along with adherence to FOB Destination terms to define ownership transfer and shipping responsibilities. The work must be executed with precision to guarantee readiness for military distribution and end-use. This is a subcontract opportunity posted on July 29, 2026, with a response deadline of August 4, 2026, under the NAICS code 493190 for other warehousing and storage. The contracting organization is the Subsistence FSE Supply Chain under the Department of Defense, though specific location and point of contact information are not provided. All work is expected to be performed in accordance with federal defense logistics protocols, and interested parties must submit proposals through the DIBBS portal prior to the stated deadline.

Other Warehousing and Storage

POSTED

DEADLINE

Handle Component SupplyThe contract requires the supply of 12,260 injection-molded plastic or composite handles designed specifically for 5-gallon water containers, ensuring durability and seamless compatibility with the container’s structural design. Each batch must be produced with full traceability to guarantee quality control and compliance with strict military specifications, supporting the reliable distribution of water in operational environments. The handles are part of a larger supply chain initiative managed by the Department of Defense’s Subsistence FSE Supply Chain, and the work is intended for use in defense logistics operations. This is a subcontract opportunity under NAICS code 326199, with bids due by August 4, 2026, following a posting date of July 29, 2026. There is no set-aside designation specified, and the performance location is not detailed beyond the agency’s jurisdiction. Interested parties must respond through the official DIBBS platform using the solicitation number SPE3SE26Q0419, and submissions must address all technical and traceability requirements to be considered for award.

All Other Plastics Product Manufacturing

POSTED

DEADLINE

Fiberboard Overpack Box ManufacturingThe contract seeks the manufacture of 12,260 knocked-down fiberboard overpack boxes specifically engineered to securely contain 5-gallon water containers for use in military logistics operations. These boxes must be durable enough to withstand harsh transportation and storage conditions typical of defense supply chains, and must fully comply with DLA RP001 specifications and MIL-STD-129 marking standards to ensure proper identification, handling, and tracking throughout the supply chain. The product must be delivered in a knocked-down configuration to optimize space efficiency during transport and storage prior to final assembly at the point of use. The solicitation is issued as a subcontract under the NAICS code 322220, which classifies the manufacturing of other paperboard containers and packaging. The posting date is July 29, 2026, with a response deadline of August 4, 2026, indicating a tightly scoped procurement window. While no set-aside designation or point of contact is specified, the contract is managed by the Subsistence FSE Supply Chain under the Department of Defense, and performance is expected to support broader military logistics requirements. All proposals must align precisely with the stated technical and compliance criteria to be considered eligible.

Paper Bag and Coated and Treated Paper Manufacturing

POSTED

DEADLINE

Water Container Kit Assembly and PackagingThe contract requires the assembly and packaging of 613 complete water container kits, each consisting of 20 plastic water containers, fiberboard overpacks, and handles, all delivered in unassembled form as a single package. Every kit must be prepared with military-compliant labeling and preservation standards to ensure readiness for deployment and storage under strict defense logistics requirements. The work is governed under NAICS code 326199 and is classified as a subcontract under the Department of Defense’s Subsistence FSE Supply Chain, with a firm response deadline of August 4, 2026, and a solicitation posted on July 29, 2026. All components must be handled and packaged to meet exacting military specifications without deviation, and no partial or incomplete assemblies will be accepted.

All Other Plastics Product Manufacturing

POSTED

DEADLINE