Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLASTIC SHEET

Active
SPE8E5-26-T-4011Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This contract specifies the procurement of nine sheets of plain, transparent, and colorless acrylic plastic sheeting, measuring 48 inches long, 48 inches wide, and 0.250 inches thick. The material must comply with the current issue of QPL 8184 and is identified as Type I, Class 2 under the MIL-PRF-8184F specification. A critical requirement is that the manufacturer must be QPL approved at the time of the contract award. The acquisition is subject to specific technical and quality requirements maintained in the DLA Master List, and sampling for inspection must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based sampling plan. The delivery is scheduled for approximately 167 days after award, with a required ship date of February 15, 2027, to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Shipping terms are FOB Origin, with inspection and acceptance occurring at the destination. Packaging must adhere to DLA requirements, specifically RP001 for palletization and MIL-STD-129 for marking and labeling. If the material is deemed hazardous under FED-STD-313, specific packaging requirements apply; otherwise, commercial packaging per ASTM D3951 is acceptable, provided it does not conflict with DLA Master List requirements.

General Info

Procurement of nine MIL-PRF-8184F compliant acrylic sheets for delivery by February 2027.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

326113 - Unlaminated Plastics Film and Sheet (except Packaging) ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-4011.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUSA
Contacts
BRANDON WICKER
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLASTIC SHEET
PLASTIC SHEET
ACRYLIC TYPE PLAIN, TRANSPARENT, COLORLESS<(>,<)>
48 IN LONG, 48 IN WIDE, 0.250 IN THICK<(>,<)>
QPL 8184/CURRENT ISSUE APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
THIS NSN HAS QUALIFIED PRODUCTS LIST (QPL)
REQUIREMENTS.
.
THE MANUFACTURER FOR THE QPL ITEM MUST BE QPL
APPROVED AT THE TIME OF THE CONTRACT AWARD.
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
TDP Rev A Gen 1 IAW BASIC SPEC NR MIL-PRF-8184F NOT 1 REVISION NR F DTD 07/24/2019 PART PIECE NUMBER: TYPE I, CLASS 2
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
SPE8E5-26-T-4011
SECTION B
PR: 7017964561 PRLI: 0001 CONT’D
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017964561 0001 SH 9.000
NSN/MATERIAL:9330005592043
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/15/2027 Original Required Delivery Date:02/02/2027
SPE8E5-26-T-4011 NSN/Part Number: 9330-00-559-2043 Quantity: 9 SH Purchase Request: 7017964561QTY: 9 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326113
New
Federal
Plastic Sheeting
Solicitation # SPMYM326Q8035
The Portsmouth Naval Shipyard is seeking quotes under solicitation SPMYM326Q8035 for the procurement of 80 units of plastic film sheeting and associated data requirements. This requirement is being processed through full and open competition using Simplified Acquisition Procedures, with the contract award based on the Lowest Price Technically Acceptable evaluation criteria. Potential contractors must be registered in the System for Award Management and will be screened for responsibility via the Supplier Performance Risk System. Qualified sources must submit their quotations via email to Sam Aiguier by September 3, 2026, at 12:00 PM EST. Submissions must include pricing, FOB point, Cage Code, business size under NAICS code 326133, and a preferred payment method of either Government Commercial Purchase Card or Wide Area Workflow. Offerors are also required to complete and include provisions 252.204-7016 and 252.204-7019 with their proposal.
DLA Maritime - Portsmouth

POSTED

about 15 hours ago

DEADLINE

in 8 days
View Details
NAICS: 326113
New
Federal
HDPE Board for Signs
Solicitation # SV0213-26
Federal Prison Industries (FPI) UNICOR is soliciting proposals for a two-year, firm-fixed-price, indefinite delivery-indefinite quantity contract to provide High-Density Polyethylene (HDPE) boards for signage. This requirement is a 100 percent small business set-aside under NAICS code 326113. The contract covers a total of 299 sheets, totaling 9,568 square feet, with specific dimensions of 3/4 inch by 48 inches by 96 inches. The boards must feature a three-color design consisting of Espresso Brown on the top and bottom and Salt Lake Yellow in the center, adhering to FED.STD-595C standards. All items must be delivered FOB Destination to the UNICOR facility in Cumberland, Maryland. The acquisition is conducted under FAR Part 12 for commercial items and FAR Part 13 for simplified acquisition procedures, with the award based on the best overall value. Evaluation factors include price, lead time, past performance, and quality/color match. Prospective offerors must be registered in the System for Award Management (SAM) and are required to submit physical samples to the Cumberland location. Proposals must be submitted electronically to the contracting officer by August 14, 2026, at 2 PM EST. While the contract establishes the agreement for a two-year period, it does not obligate funds at inception; instead, funding will be obligated through individual purchase orders.
Dba Federal Prison Industries United States Department Of Justice

POSTED

7 days ago

DEADLINE

in 1 day
View Details
NAICS: 326113
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-4013
This contract is a solicitation for the procurement of 89 sheets of clear polycarbonate plastic, identified by NSN 9330-01-124-3310. The requirement includes specific high-performance materials such as DSM Engineering Plastic Products HYZOD AR or MAKROLON AR, as well as Queen Screw and Manufacturing MR10, all specified at dimensions of 48 by 96 by 0.250 inches. This is a total small business set-aside acquisition under NAICS code 326113, managed by the Department of Defense through the DLA Distribution DDSP New Cumberland Facility. The procurement is subject to strict technical and quality requirements, including DLA packaging standards and the potential application of covered defense information. Deliveries are to be made FOB Origin with inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-129 for marking and labeling, with specific protocols for hazardous or non-hazardous materials as defined by FED-STD-313. The required delivery date is set for early 2027, with a 167-day delivery window specified.
DDSP NEW CUMBERLAND FACILITY

POSTED

7 days ago

DEADLINE

in 5 days
View Details
NAICS: 326113
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE8E5-26-T-3996
This contract is for the procurement of a plastic sheet with a thickness of 1.750 inches. The required dimensions are a length between 36 and 48 inches, a width between 29.5 and 38 inches, and a total area between 1400 and 1536 square inches. The order consists of one unit with a delivery timeframe of 100 days, delivered FOB Origin, with inspection and acceptance also occurring at the origin. The supplier must adhere to DLA packaging requirements and MIL-STD-129 for marking and labeling. Quality assurance is governed by specific sampling methods, including MIL-STD-1916 or ASQ H1331, and the contract includes a First Article Test requirement. The final destination for the shipment is the US Army SSA in Powidz, Poland, with a required delivery date of August 14, 2026.
Defense Logistics Agency

POSTED

8 days ago

DEADLINE

in 5 days
View Details
NAICS: 326113
DIBBS
Supply of 5-Gallon Poly Drums (UN Rated)The contract calls for the supply of 5-gallon polyethylene drums certified to UN 1H2/Y30/S standards, specifically designed for the safe containment and transportation of small volumes of hazardous or regulated liquids. These drums must meet rigorous international packaging requirements for compatibility, impact resistance, and leak-tight performance under transport conditions, ensuring compliance with global shipping regulations for chemical and industrial materials. The requirement is part of a subcontract under the Defense Logistics Agency, which operates under the Department of Defense, indicating the drums will support military, logistical, or defense-related operations requiring secure liquid handling. The solicitation is classified under NAICS code 326113, which corresponds to plastic packaging and container manufacturing, confirming the focus on production quality and material specifications. The contract was posted on July 20, 2026, with no set-aside provisions specified, meaning any qualified supplier may compete. Performance location details and point of contact information are not provided, but the official award reference is linked through the DIBBS system, where award details and delivery directives can be accessed. The UN certification is non-negotiable, and adherence to this standard is critical for regulatory compliance and transport safety.
Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 326113
DIBBS
Supply of 30-Gallon Poly Drums (UN Rated)The contract is for the supply of 30-gallon polyethylene drums certified to UN 1H2/Y180/S standards, ensuring compliance with international regulations for the safe storage and transport of liquids, particularly hazardous materials. These drums are designed to meet rigorous structural and performance requirements for durability, leak resistance, and compatibility with a range of chemical substances, making them suitable for military and defense logistics applications. The specification indicates strict adherence to UN certification, which governs packaging integrity under various conditions including stacking, drop testing, and pressure exposure. This is a subcontract awarded by the Defense Logistics Agency under the Department of Defense, with the NAICS code 326113 indicating classification within plastics product manufacturing. The contract was posted in July 2026 and is tied to the procurement system used by DLA for sourcing critical packaging solutions. Performance locations and detailed contact information are not specified, but the procurement is linked to the DIBBS system under contract numbers SP450025D0013 and SP450026F6551, suggesting it is part of a broader logistical effort to maintain standardized, certified containment units across defense supply chains.
Defense Logistics Agency

POSTED

about 1 month ago

DEADLINE

N/A
View Details
NAICS: 326113
DIBBS
Flexible Pouch Packaging and Filling Services
Defense Logistics Agency

POSTED

about 2 months ago

DEADLINE

N/A
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 314999
New
DIBBS
INSULATION BLANKET,
Solicitation # SPE8E6-26-T-4213
This solicitation, issued by the Department of Defense under the Defense Logistics Agency, is for the procurement of 82 insulation blankets identified by NSN 5640-01-125-9918. The contract is designated as a total small business set-aside under NAICS code 314999, with a delivery requirement of 256 days after order. Performance is to be carried out at the New Cumberland facility. The agreement is subject to strict technical and quality requirements as defined in the DLA Master List, including specific packaging standards and the removal of government identification from non-accepted supplies. Notably, the contract involves technical data subject to ITAR and EAR export controls, requiring contractors to hold an approved US/Canada Joint Certification Program certification and complete mandatory training to access sensitive data.
All Other Miscellaneous Textile Product Mills

POSTED

about 10 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332911
New
DIBBS
SEAT, VALVE
Solicitation # SPE7MC-26-T-195U
Solicitation SPE7MC-26-T-195U is a request for quotations issued by DLA Land and Maritime for the procurement of 13 valve seats, identified by NSN 4820-00-956-1486 and part number 60-591PC608 from Steward Machine Co Inc. The items are intended for use in an E/I fan with a capacity of 37,800 CFM. Delivery is required FOB Origin to the DLA Distribution DDSP New Cumberland facility in Pennsylvania, with a need ship date of October 29, 2024. Inspection and acceptance will occur at the destination in accordance with FAR 52.246-2. The contract mandates strict adherence to MIL-STD-2073-1E for packaging and MIL-STD-129 for marking, with palletization following RP001 requirements. Special environmental restrictions apply, specifically the prohibition of intentionally added mercury except where functionally required per NAVSEA 5100-003D. Compliance with the Buy American Act, the Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information is required. All quotes must be submitted through the DLA Internet Bid Board System, and payment processing will be handled via the Wide Area WorkFlow system.
Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333414
New
DIBBS
LIGHT, INDICATOR
Solicitation # SPE8E7-26-T-3700
This contract is for the procurement of 13 indicator lights under solicitation number SPE8E7-26-T-3700 for the Department of Defense. The items are identified by NSN 6210-01-566-1729 and are associated with part numbers from Eaton Corp and Dramco Inc. Delivery is required within 145 days, with a required delivery date of November 9, 2026, and a need ship date of February 1, 2027. The shipment is to be delivered FOB Origin to the DLA Distribution New Cumberland facility in Pennsylvania. The contract mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards. It includes specific environmental restrictions prohibiting the intentional addition of mercury or mercury-containing compounds, except for specific functional exceptions. Technical and quality requirements are governed by the DLA Master List, and the contract specifies that inspection and acceptance will occur at the destination.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE86-26-T-4224
Solicitation SPE8E6-26-T-4224 is a request for quotations issued by DLA Troop Support for the procurement of 584 identification markers under NSN 7690010321177. These markers are vinyl, adhesive-backed, rectangular signs measuring 13 inches by 4.484 inches with a white background and specific black and red directional symbols used to direct personnel to Red Cross facilities. The items must be corrosion and weather resistant and adhere to technical specifications MIL-DTL-43719/1B and MIL-DTL-43719D(1). The markers are classified as Type I items with a non-extendable shelf life of 24 months, requiring specific shelf life marking in accordance with MIL-STD-129. Delivery is required within 31 days of award, with a need ship date of August 6, 2026, and a final required delivery date of December 30, 2026. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Packaging must comply with MIL-STD-2073-1E, and the government requests the avoidance of plastics for wrapping and cushioning. Award may be automated, and a price evaluation preference is available for certified HUBZone small businesses. Contractors must use the Wide Area Workflow system for invoicing and payment processing.
Books Printing

POSTED

about 10 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332911
New
DIBBS
VALVE, ANGLE
Solicitation # SPE7MC-26-T-189H
This contract is a solicitation for the procurement of six angle valves, specifically identified as Model 40695-501 2 inch Trac style FA back pressure regulating valve assemblies for lube oil service. The items are associated with NSN 4820-01-475-7979 and various Trac Regulator Co. part numbers. The agreement mandates strict adherence to DLA packaging requirements and MIL-STD-129 marking standards, with delivery set as FOB Origin and inspection and acceptance occurring at the destination. A critical environmental requirement prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components as defined by NAVSEA. The delivery timeline is set for 194 days after order, with a required delivery date of March 4, 2027. All shipments are to be directed to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania.
Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 1 day
View Details
NAICS: 332111
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-2086
This contract is for the procurement of 13 feet of round, hot finished, and annealed 316L steel composite metal bars. The material must have a diameter of 4.750 inches and be supplied in whole foot lengths between 10 and 20 feet. The order includes a quantity variance of plus or minus 10 percent and requires delivery to the DLA Distribution New Cumberland facility. Compliance with the Qualified Suppliers List for Distributors is mandatory for award eligibility. The supplier must provide a Certificate of Quality Compliance with every shipment and adhere to strict marking requirements, including the contract delivery order number, NSN, and manufacturer details. Packaging and preservation must follow MIL-STD-129 and ASTM A700 standards, with a required delivery date of November 11, 2026.
Iron and Steel Forging

POSTED

about 10 hours ago

DEADLINE

in 1 day
View Details
NAICS: 335312
New
DIBBS
POWER SUPPLY
Solicitation # SPE7L7-26-T-4770
Solicitation SPE7L7-26-T-4770 is a total small business set-aside issued by DLA Land and Maritime for the procurement of nine power supply units, identified by NSN 6130-00-433-0385. This is a restricted source item requiring engineering source approval by the government design control activity. The delivery requirement is set for 190 days after the award, with shipping terms established as FOB Origin and delivery to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania. Inspection and acceptance will occur at the destination. The contract mandates strict adherence to quality and packaging standards, including ASTM D3951, MIL-STD-129 for marking, and RP001 for palletization. Sampling must follow MIL-STD-1916, ASQ H1331, or a comparable zero-based plan, with specific AQL levels assigned for critical, major, and minor attributes. Additionally, the requirement incorporates CMMC Level 2 self-assessment and DFARS 252.204-7012 for safeguarding covered defense information. Offerors must comply with the Buy American Act and the Berry Amendment, and all payment processing must be conducted through the Wide Area WorkFlow system.
Motor and Generator Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 1 day
View Details
NAICS: 326211
New
DIBBS
FLAP, INNER TUBE, PNEUMA
Solicitation # SPE7L7-26-Q-2289
This contract is a solicitation for the procurement of 226 pneumatic tire inner tube flaps, identified by NSN 2640-01-176-4797. The delivery is required within 90 days after order, with inspection and acceptance occurring at the destination. The items must adhere to Technical Data Package Revision A and MIL-STD-129R(3) standards, and they are subject to a non-extendable shelf life of 60 months. The agreement mandates strict compliance with DLA packaging requirements and prohibits the use of Class I ozone-depleting chemicals. Shipping and palletization must follow MIL-STD-2073-1E and RP001 guidelines, with the final delivery destination being the DLA Distribution DDSP New Cumberland facility in Pennsylvania. This is a total small business set-aside procurement under solicitation number SPE7L7-26-Q-2289.
Tire Manufacturing (except Retreading)

POSTED

about 10 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332911
New
DIBBS
VALVE, SAFETY RELIEF
Solicitation # SPE7MC-26-T-189Z
This solicitation is for the procurement of 46 safety relief valves under NSN 4820-01-328-5433 for the Department of Defense. The contract requires delivery within 143 days after order and specifies that the item is a restricted source product manufactured to OEM drawings. Because casting or forging may be necessary for production and the government may not possess the required special tooling, contractors are directed to submit assistance requests through DLA for sourcing and material information. The agreement mandates strict adherence to DLA packaging requirements and technical quality standards. A critical environmental restriction prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, with limited exceptions for specific functional components. Offers from manufacturers other than the prequalified sources must include comprehensive technical data to ensure the parts are suitable for the intended application.
Industrial Valve Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 1 day
View Details
NAICS: 333413
New
DIBBS
FAN, VANEAXIAL
Solicitation # SPE8E7-26-T-3695
This contract is a solicitation for the procurement of seven vane axial fans, identified by NSN 4140013965357 and part number 654VE7192-660. The requirement is a total small business set-aside under NAICS code 333413, with delivery expected within 145 days. The items are to be delivered FOB Origin to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with a required delivery date of August 25, 2027. The agreement mandates strict adherence to DLA packaging requirements, specifically ASTM D3951 and MIL-STD-129 for marking and labeling. It incorporates technical and quality requirements from the DLA Master List and notes that no approved technical data package is currently available for this specific NSN. Inspection and acceptance will take place at the destination.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 13 days
View Details
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-Q-0413
This contract is for the procurement of three units of reflective sheeting, identified by NSN 9390-01-734-5742 and Boeing part number 314T4024-4. The agreement is a firm fixed price contract with a delivery requirement of 90 days after order. The items are designated as critical application items and must comply with FAA airworthiness approval and specific technical data package revisions. The contractor is required to maintain strict supply chain traceability and adhere to DLA packaging and marking standards, including MIL-STD-129 and MIL-STD-2073-1E. Quality assurance will be managed through zero-based sampling plans per MIL-STD-1916 or ASQ H1331. Inspection and acceptance will take place at the destination, with shipping directed to the DLA Distribution DDSP New Cumberland facility.

POSTED

about 10 hours ago

DEADLINE

in 5 days
View Details
NAICS: 332912
New
DIBBS
STEM, FLUID VALVE
Solicitation # SPE7MC-26-T-188R
The contract pertains to the procurement of a STEM fluid valve with NSN 4820-01-525-0650 and part number HBV-F2-14-0019-06, supplied by B N L Industries Inc, with a total quantity of 16 units. Delivery is required FOB origin within 164 days of contract award, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item must comply with DLA packaging requirements per MIL-STD-2073-1E and marking standards under MIL-STD-129, with no special marking required. Packaging must use preservative method 10, dry storage, and be contained in unit container E6. The shipment must be palletized per DLA guidelines and delivered to the DDSP New Cumberland Facility in Pennsylvania. Mercury or mercury-containing compounds are strictly prohibited from direct contact with the valve unless explicitly exempted for functional uses such as instruments or sensors as specified by NAVSEA, and any permissible mercury-containing components must include secondary containment and be shockproof per NAVSEA 5100-003D. The contract references the DLA Master List of Technical and Quality Requirements for governing specifications and was issued under solicitation SPE7MC-26-T-188R with a response deadline of August 21, 2026, and an original delivery requirement of November 18, 2026, though the need ship date is February 2, 2027. The purchasing point of contact is Paula McClary, reachable via the DLA email and phone listed.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 10 hours ago

DEADLINE

in 1 day
View Details