Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLASTIC STRIP, PRESS

Active
SPE8E5-26-T-3824Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of 6 roll units of plastic strip with pressure-sensitive adhesive coating, identified by NSN 9330-01-580-6367 and referenced under solicitation SPE8E5-26-T-3824, issued by the Defense Logistics Agency. Each roll equals 36 yards, with a total quantity of 216 yards required, to be delivered FOB origin within 167 days from the contract award, with no variance allowed in quantity. Delivery must be made to DLA Distribution Warner Robins at Robins Air Force Base in Georgia, with inspection and acceptance occurring at the destination. Packaging must comply with DLA Packaging Requirements, MIL-STD-129 for marking and labeling, and either ASTM D3951 for non-hazardous material or TQ requirement IP025 if classified as hazardous under FED-STD-313, with DLA's Technical and Quality Requirements taking precedence over any other standard. The product must conform to approved specifications from 3M or Landsberg Kent H Co with specified part numbers. All packaging and palletization must adhere strictly to RP001 guidelines. The contract requires delivery by February 1, 2027, with an original required date of November 12, 2026, and transportation and shipping instructions are governed by DLA Procurement Notes C19 and C20. Point of contact for inquiries is Khue Nguyen of the Department of Defense.

General Info

Procure 6 rolls of 36-yard adhesive plastic strip, FOB origin, deliver to Robins AFB by Feb 1, 2027, per DLA specs and packaging standards.

Agency

Department Of Defense → WARNER ROBINSView Agency

NAICS

332999 - All Other Miscellaneous Fabricated Metal Product ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-3824.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → WARNER ROBINS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → WARNER ROBINS
View Agency Profile
Office AddressUS
Contacts
Khue Nguyen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLASTIC STRIP,PRESS
PLASTIC STRIP,PRESSURE SENSITIVE ADHESIVE COATED
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
1 RO = 36 YD
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
3M COMPANY 76381 P/N 7100074250
LANDSBERG KENT H CO 6D892 P/N 8681HS-36173
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017757327 0001 RO 6.000
NSN/MATERIAL:9330015806367
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
IF MATERIAL IS CONSIDERED HAZARDOUS IAW FED-STD-313,
PACKAGE IN ACCORDANCE WITH TQ REQUIREMENT IP025.
IF THE MATERIAL IS NOT CONSIDERED HAZARDOUS, IN ACCORDANCE WITH
SPE8E5-26-T-3824
SECTION B
PR: 7017757327 PRLI: 0001 CONT’D
FED-STD-313, THE MATERIAL SHALL BE COMMERCIALLY PACKAGED IN ACCORDANCE
WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET
BLDG 376
ROBINS A F B GA 31098-1887
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
SW3119
DLA DISTRIBUTION WARNER ROBINS
455 BYRON STREET BLDG 376
ROBINS A F B GA 31098-1887
US
Need Ship Date:02/01/2027 Original Required Delivery Date:11/12/2026
SPE8E5-26-T-3824 NSN/Part Number: 9330-01-580-6367 Quantity: 6 RO Purchase Request: 7017757327QTY: 6 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332999
New
DIBBS
PLASTIC ROUND SECTI
Solicitation # SPE8E5-26-T-3833
The contract covers the procurement of a plastic round section made of ultra-high-molecular-weight polyethylene (UHMW PE) in compliance with ASTM D4020, with a nominal outside diameter of 1.625 inches and a nominal length of 4.000 feet, featuring a smooth outside periphery. The item is identified by NSN 9330-01-613-7901, with a total quantity of 205 feet required under solicitation SPE8E5-26-T-3833. Delivery is due within 167 days after award, and the procurement is conducted as fully competitive under a federal specification. All supplies must adhere to DLA packaging requirements and incorporate technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date or amendment date for large acquisitions. The contract strictly prohibits the intentional addition of mercury or mercury-containing compounds in or in direct contact with the supplied hardware, with exceptions limited to functional uses in batteries, fluorescent lamps, required instruments, sensors, controls, weapon systems, or chemical analysis reagents authorized by NAVSEA. Portable fluorescent lamps and instruments containing mercury must be shockproof and include a secondary containment boundary per NAVSEA 5100-003D. Sampling and quality verification must follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise specified, and attribute classifications must align with verification levels VII, IV, and II corresponding to AQLs of 0.1, 1.0, and 4.0 respectively. Unspecified attributes are treated as major. All requirements are subject to the DLA Master List referenced in the contract, and removal of government identification from non-accepted supplies is mandated. The point of contact for inquiries is Khue Nguyen at the DLA New Cumberland facility.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
LADDER, FIRE, SINGLE
Solicitation # SPE8E6-26-T-4006
The contract pertains to the procurement of three single fire ladders, identified by NSN 4210-01-127-7836 and part number 775A-14, sourced from DUO-SAFETY LADDER CORPORATION in Oshkosh, WI. Delivery is required FOB origin within 167 days of contract award, with no variance allowed in quantity and inspection and acceptance occurring at the destination facility in Tracy, CA. Packaging must adhere strictly to DLA’s Master List of Technical and Quality Requirements, which override all other standards; non-hazardous items must be commercially packaged per ASTM D3951 while hazardous items follow TQ requirement IP025, and all packaging must be labeled in compliance with MIL-STD-129. Palletization must conform to RP001 DLA Packaging Requirements, and the Unit of Issue is EA with a total contract value of $9.00. The solicitation number is SPE8E6-26-T-4006, issued by DLA District San Joaquin under the NAICS code 332999, with a response deadline of August 17, 2026, and a required ship date of February 1, 2027. All materials must comply with potential Covered Defense Information requirements, and the designated receiving point is W62G2T W1A8 DLA DIST SAN JOAQUIN, 25600 S CHRISMAN ROAD, REC WHSE 57, TRACY CA 95304-5000.
DLA DIST SAN JOAQUIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE7M4-26-T-300U
Offerors must comply with strict requirements for this solicitation, including the prohibition of covered telecommunications equipment or services under FAR 52.204-24 and DFARS 252.204-7016, ensuring no equipment or services from restricted foreign sources are used in performance. Domestic material restrictions under the Berry Amendment and Buy American Act apply, with the Berry Amendment threshold lowered to $150,000, requiring detailed disclosure of any non-domestic materials and strict adherence to DFARS clauses 252.225-7006, 252.225-7012, and 252.225-7015. Small business joint ventures must submit specific representations for eligible categories including small business, service-disabled veteran-owned, WOSB, EDWOSB, and HUBZone. Vendors are strongly encouraged to quote quantity ranges due to fluctuating demand, as this allows buyers to consolidate or adjust requirements without administrative delays, though this does not apply to Auto IDC. Proposals including items produced via additive manufacturing are ineligible for award unless prior written approval is granted. Vendors must register through the new AMPS system within two months to retain access to the Vendor Shipment Module, with those using VSM WebServices required to update their internal schema to avoid disrupted shipping. All offers must be submitted via DIBBS, and if unable to quote by the closing date, a “No Bid” submission with anticipated date or reason is mandatory to avoid misinterpretation of non-responsiveness. Fast Pay is not applicable. The item under solicitation is a hose assembly with NSN 4720-01-625-6296, quantity 16 units, with a 140-day delivery requirement, and the point of contact is Blake Tushar.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-148B
The contract specifies the procurement of one unit of a vehicular bracket identified by NSN 2510-01-706-9776 and part number 5270099-329 under solicitation SPE7L3-26-T-148B, with a required delivery within five days of order placement. Delivery is FOB origin with zero variance allowed in quantity, and inspection and acceptance occur at the destination. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede other specifications, including ASTM D3951, and packaging must adhere to MIL-STD-129 and RP001 DLA Packaging Requirements, with palletization following specified guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. The item must be shipped via traceable freight to the designated military facility in San Diego, California, with parcel post explicitly forbidden. The unit of issue is each, priced at one dollar, with no total price adjustment permitted. The contract enforces strict labeling and packaging standards, and all technical and quality specifications incorporated by reference must be met without exception, overriding any conflicting requirement unless explicitly amended. The point of contact for inquiries is Lee Miller at DLA, with responses due by August 17, 2026, and the required delivery date set for August 3, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
CLAMP BAND FIVE
Solicitation # SPE8E5-26-T-3838
This contract pertains to the procurement of 95 units of Clamp Band Five, identified by NSN 3460-01-733-4914 and part number 90-0013, under solicitation SPE8E5-26-T-3838. The requirement is for delivery FOB origin within 167 days of the contract award, with zero tolerance for quantity variance. All items must comply with the DLA Master List of Technical and Quality Requirements, which override any other standards such as ASTM D3951. Packaging must adhere to MIL-STD-129 for marking and labeling and follow RP001 for DLA packaging standards, with palletization specified accordingly. Inspection and acceptance occur at the destination, and all supplies must be prepared for delivery with a Unit of Issue of EA and Quantity per Unit Pack of 001. Government identification must be removed from non-accepted supplies as per RQ011, and the contract may involve Covered Defense Information as noted under RD003. The delivery endpoint is DLA Distribution Depot Hill in Hill AFB, Utah, with transportation logistics governed by DLAD Proc Notes C19 and C20. The original required delivery date is November 17, 2026, with a need ship date of February 1, 2027. The solicitation was posted on August 5, 2026, with responses due by August 17, 2026, and the contracting office is under the Department of Defense, with Ira Hedgepeth listed as the primary point of contact.
DEPOT HILL

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
PLATE, IDENTIFICATION
Solicitation # SPE8E6-26-T-3987
The contract specifies the procurement of a single identification plate for a 3-way 2-position solenoid-operated hydraulic valve rated at 3000 psi continuous duty with 28 volts DC, part number 882, manufactured by Hydro-Aire Aerospace Corp. The plate is to be made of aluminum alloy QQ-A-250/1, alloy 1100, fully anodized with natural-colored inscription on a black background conforming to FED-STD-595, 37038. It features a rectangular shape with a slit tab, measuring 3.660 inches in width, 0.820 inches in length, and 0.012 inches in thickness, and is to be attached via a hole. The item is identified by NSN 9905-00-001-7003 and is to be delivered in a quantity of 19 units, with a unit price of $19.00 totaling $361.00. The plate must comply with all technical and quality requirements from the DLA Master List of Technical and Quality Requirements, which override any conflicting standards. Packaging must adhere to ASTM D3951 and MIL-STD-129 labeling and marking requirements, with palletization following DLA’s RP001 packaging guidelines. Delivery is required FOB origin within 120 days of award, with inspection and acceptance occurring at the destination. The item must be shipped by December 16, 2026, to meet the original delivery deadline of March 7, 2027. The delivery location is DLA Distribution Cherry Point, Phantom Rd Building 147, Bay A, Cherry Point, NC 28533-5040. The solicitation number is SPE8E6-26-T-3987, issued on August 5, 2026, with responses due by August 17, 2026. The contract includes a zero variance on quantity, and all packaging and marking must reflect the specified Unit of Issue and Quantity per Unit Pack. Transportation and freight details are governed by DLAD procedural notes C19 and C20. All technical specifications, including material, surface treatment, dimensions, and color, are binding and must be strictly followed per the referenced DLA standards.
CHERRY POINT PHANTOM RD BLDG

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-147Z
The contract pertains to the procurement of one unit of a vehicular bracket designated by NSN 2510-01-707-0377 and part number 5270900-329 from POLARIS SALES INC, issued under solicitation SPE7L3-26-T-147Z. Delivery is required within five days of award, with goods to be shipped FOB origin and inspected and accepted at the destination. No quantity variance is permitted, and strict compliance with DLA’s Master List of Technical and Quality Requirements is mandatory, superseding any conflicting specification standards. The item must not contain any Class I ozone-depleting chemicals, and substitutes require prior approval unless explicitly authorized. Packaging must conform to ASTM D3951, with markings and labels adhering to MIL-STD-129, and palletization in accordance with DLA’s packaging requirements. The unit of issue is each, and the sole quantity ordered is one. Shipping must be via the fastest traceable means, explicitly prohibiting parcel post. The delivery address is the Marine Wing Support Squadron 373 in San Diego, with a freight shipping point at Bldg 7209, Miramar Way. The required delivery date is August 3, 2026, and the contract is subject to DLA’s governance, with points of contact and compliance details specified for federal use.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
HOSE ASSEMBLY, NONME
Solicitation # SPE8E6-26-T-4038
The contract specifies the procurement of a hose assembly, nonmetallic, under solicitation SPE8E6-26-T-4038, with a total quantity of 20 units at a unit price of $20.00, resulting in a total price of $400.00. The item is identified by NSN 4720-01-668-3765 and part number MS8005E874A, and must comply with technical and quality requirements from the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with precedence over other standards such as ASTM D3951. Packaging and labeling must adhere to MIL-STD-129 and RP001, and palletization must follow DLA procurement guidelines. The delivery is FOB origin, with inspection and acceptance occurring at the destination after a 69-day delivery window, and the required ship date is October 26, 2026, with an original delivery deadline of January 21, 2027. The quantity variance is fixed at zero percent, and the item must be packaged in accordance with the contract’s specified unit of issue. Government identification must be removed from non-accepted supplies, and covered defense information provisions apply. All packaging and documentation must reflect the correct unit of issue as defined by DLA, and the delivery address is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581. Transportation instructions are governed by DLAD Proc Notes C19 and C20.
SAN DIEGO

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
COVER, PORTHOLE
Solicitation # SPE7M4-26-T-300P
The contract is for the procurement of one unit of a port hole cover, identified by NSN 2040-17-121-5355 and part number C945696, supplied by MAFO NAVAL CLOSURES B.V. The item must meet technical and quality standards outlined in the DLA Master List of Technical and Quality Requirements, which supersede all other specifications including ASTM D3951. Packaging and labeling must comply with MIL-STD-129 and DLA Packaging Requirements for Procurement, with all units packed in accordance with the specified Unit of Issue and Quantity per Unit Pack. Delivery is due within 20 days of contract award, FOB destination, with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The shipment must be sent via traceable freight methods to the designated vessel, USS ANCHORAGE LPD 23, with a specific RDD 777 shipment designation, and parcel post is explicitly prohibited. The required delivery date is August 3, 2026, and the contract number is SPE7M4-26-T-300P. All logistics and shipping instructions, including freight and destination details, are tied to DLA procedural notes and vendor systems such as VSM. The point of contact for inquiries is Rory O'Reilly, and this solicitation was posted August 5, 2026, with a response deadline of August 17, 2026.
FLUID HANDLING DIVISION

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
SHOCK ABSORBER, DIRE
Solicitation # SPE7L1-26-T-917C
This contract specifies the procurement of one shock absorber, dire, with NSN 2510-01-724-1761, under solicitation SPE7L1-26-T-917C, issued by the Department of Defense’s Land Supply Chain. The item must be supplied by approved manufacturers including Tenneco Inc, Volvo Group North America LLC, and Mack Trucks Inc, each with designated part numbers. Delivery is required within 10 days of contract award, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, Fort Leonard Wood, Missouri. The product must comply with DLA packaging standards per MIL-STD-2073-1E and MIL-STD-129 marking requirements, with no special marking codes applied. Ozone depleting chemicals are strictly prohibited, and any substitute chemical must be pre-approved unless explicitly authorized by the specification. Packaging must adhere to DLA’s procurement guidelines, including intermediate containment, wrap materials, and palletization. The shipment must be sent via the fastest traceable means, excluding parcel post, to the designated freight and marking address. The required delivery date is August 3, 2026, with the solicitation opening on August 5, 2026, and responses due by August 17, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, with the applicable revision tied to the solicitation or award date. Unit of issue is each, and all logistics data, including freight and point of contact, are specified for government use only.
LAND SUPPLY CHAIN

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
BRACKET, VEHICULAR C
Solicitation # SPE7L3-26-T-148K
The contract specifies the procurement of one unit of BRACKET, VEHICULAR C with NSN/Part Number 2510-01-706-9524 under solicitation SPE7L3-26-T-148K, with a delivery requirement of five days after award. The item is classified as a commercial item and must comply with MIL-STD-130N for identification marking of U.S. military property. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition size. The item is subject to strict export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of associated technical data to foreign persons regardless of location, and DFARS 252.225-7048 applies. Access to this controlled data is restricted to contractors with approved US/Canada Joint Certification Program status, who have completed required DLA training and questionnaires. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements unless explicitly authorized. Inspection and acceptance of the item may occur at the origin, and government identification must be removed from any non-accepted supplies. The point of contact is Lee Miller, with the place of performance located in San Diego, California, and the solicitation was posted on August 5, 2026, with a response deadline of August 17, 2026.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332999
New
DIBBS
DOOR, HATCH, VEHICLE
Solicitation # SPE7L3-26-T-148C
This contract mandates the delivery of one vehicle hatch door identified by NSN 2510-01-725-9385 and part number 403/R7475 from JCB INC under solicitation SPE7L3-26-T-148C, with a required delivery date of July 31, 2026, and a 20-day delivery window from order placement. The item must be supplied as a single unit with zero tolerance for quantity variance and delivered FOB origin. All technical and quality specifications are governed exclusively by the DLA Master List of Technical and Quality Requirements, and any references to ASTM D3951 for packaging are subordinate to these mandatory standards. Packaging must comply with MIL-STD-129 for marking and labeling, adhere to RP001 DLA Packaging Requirements, and be palletized according to specified guidelines. The use of Class I ozone-depleting chemicals is strictly prohibited, overriding any conflicting specification requirements, and any substitute chemicals require prior approval unless explicitly permitted by the specification. The shipment must be sent via traceable freight methods, excluding parcel post, to the designated government delivery point at BLDG 90312, MACHOL STREET, FORT HUACHUCA AZ 85613-6000, with the same address used for marking and freight shipping. The contract assigns the unit of issue as each (EA) and stipulates the packaging quantity per unit pack is 1. Government use codes, freight control, and delivery tracking identifiers are embedded within the contract, including a traceable control number M2131062090163 and project code TP 3. All performance and compliance obligations are subject to inspection and acceptance at the destination, and the point of contact for inquiries is Lee Miller with the Department of Defense. The contract remains under the jurisdiction of DLA procurement policies and supersedes any civilian or general industry standards unless explicitly aligned with DLA directives.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details

More opportunities from Department Of Defense → WARNER ROBINS

Same awarding agency

NAICS: 331315
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1955
This contract mandates the procurement of titanium alloy sheet metal, specifically 0.012 inch thick, 36 inches wide, and 96 inches long, in a hot rolled, annealed, and descaled condition, weighing approximately 6.759 pounds per sheet, conforming to SAE AMS4911T and AMS4907M standards for alloy 6Al-4V and 6Al-4V (ELI) in annealed condition. The material must be supplied in whole foot lengths only and meet exact dimensional specifications—no test coupons are permitted. Every unit must be clearly marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions, using only approved methods such as stenciling or stamping that ensure legibility, permanence, and non-contamination. A Certificate of Quality Compliance, including mill material certification, must accompany each shipment and be forwarded to the contracting officer. The product is designated as a critical application item with strict compliance requirements under the Qualified Suppliers List for Distributors (QSLD) program, meaning only suppliers listed on the QSLD are eligible to bid, and any deviation or substitution may result in criminal penalties. No source inspection is waived for QSLD-compliant suppliers, and all packaging must adhere to MIL-STD-2073-1E and DLA packaging rules, including robust edge and corner protection, full fiberboard coverage, and MIL-STD-129 marking. Shipment is to be delivered FOB origin to Robins AFB, Georgia, within 113 days, with no tolerance for variance in quantity, and must be palletized with specified material protections.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL
Solicitation # SPE8E5-26-T-3854
The contract specifies the procurement of a nonmetallic special component with dimensions and shape compliant with Lockheed-Georgia standards, manufactured to meet Lockheed Standard Material Specification STM 23-402 Class 1 Grade 50. The item is subject to strict export control under either ITAR or EAR regulations, prohibiting any transfer, including disclosure to foreign persons regardless of location, without explicit authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this technical data, and distribution is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export-controlled data training, and approved access through the DLA questionnaire process. The item carries NSN 9390-00-055-4369 with a quantity of 67 LG units, and delivery is required within 167 days after award. The solicitation, identified as SPE8E5-26-T-3854, was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 327999. Performance will occur at Robins AFB, Georgia, with Nafis Beyah designated as the primary point of contact. The contractor must maintain CMMC Level 2 certification as verified by a certified third-party assessment organization.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 325212
New
DIBBS
NONMETALLIC SPECIAL
Solicitation # SPE8E5-26-T-3808
The contract involves the procurement of NONMETALLIC SPECIAL material with a total quantity of 240 feet, subject to a maximum length of 10 feet per unit, and is identified by NSN 9390-01-346-9299. Technical data associated with this item is controlled under U.S. export regulations, either ITAR or EAR, and its dissemination to foreign persons—regardless of location—is strictly prohibited without prior authorization from the Department of State or the Department of Commerce. Access is restricted to DLA contractors who have obtained US/Canada Joint Certification Program certification, completed mandatory training on handling Defense Department export-controlled technical data, and passed the DLA export-controlled data questionnaire. The material must be delivered within 317 days after contract award, with performance occurring at Robins Air Force Base, Georgia. The solicitation, issued under number SPE8E5-26-T-3808, was posted on August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 325212. Primary point of contact is Nafis Beyah at the Defense Logistics Agency, reachable via email and phone provided.
Synthetic Rubber Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 331110
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1950
This contract specifies the procurement of titanium alloy sheet metal with exact dimensions of 0.040 inches thick, 36.00 inches wide, and 120.00 inches long, weighing approximately 28.17 pounds per sheet. The material must conform to SAE AMS4901V and SAE AMS2809B standards, with a part number of UNS R50700, hot rolled and annealed, and must be supplied in whole-foot lengths only without test coupons or deviations from dimensional tolerances. The product is designated as a critical application item subject to stringent quality and traceability controls, requiring continuous identification markings on every unit that include the DLA contract number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and full dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contamination risk, with adhesive labels required for smaller profiles. A Certificate of Quality Compliance with mill certification is mandatory for every shipment and must be provided to both the recipient and the DLA contracting officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation from this requirement must be explicitly declared, as non-compliance constitutes an unauthorized substitution that may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging requirements, including robust edge and corner protection, full top and bottom coverage, and compliance with MIL-STD-129 for labeling. The contract mandates shipment to Warner Robins Air Force Base, Georgia, with delivery due in 167 days, and the quantity of five sheets is fixed with zero variance allowance. The solicitation references DLA procurement notes and technical documents governing quality, inspection waivers, and supply chain integrity, and all compliance is enforced at the destination inspection point. The vendor must be an approved QSLD distributor, and direct sales from non-U.S. manufacturers such as Thales are prohibited unless channeled through their authorized U.S. distributor, Oshkosh Truck Corp.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
DIBBS
PLASTIC MOLDING MAT
Solicitation # SPE8E5-26-T-3852
The contract is for the procurement of 28 units of a Plastic Molding Mat identified by NSN 9330-01-672-6993 and part number 355-03220, supplied by Stratasys, Inc under solicitation SPE8E5-26-T-3852, which is a total small business set-aside. The unit price is $28.00 per EA, with a total contract value of $784.00, and delivery must be made FOB origin within 167 days of contract award, with a required ship date of February 1, 2027, and an original delivery deadline of December 1, 2026. The quantity variance is strictly zero percent, meaning no over or under shipment is permitted. Inspection and acceptance occur at destination, with packaging required to meet DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over ASTM D3951. Non-hazardous material must be commercially packaged in compliance with ASTM D3951, while hazardous material must follow Fed-Std-313 and TQ requirement IP025. All packaging must be marked and labeled per MIL-STD-129, palletized according to RP001 DLA packaging requirements, and shipped to the designated delivery address at Robins AFB, Georgia. Transportation instructions are governed by DLAD Proc Note C19 and C20, and the Unit of Issue and Quantity per Unit Pack must strictly align with the purchase order specifications.
All Other Plastics Product Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3783
The contract is for the procurement of a clear acrylic plastic sheet measuring 60 inches in length, 36 inches in width, and 0.188 inches in thickness, identified by NSN 9330-00-483-3266. The item is to be procured as a fully competitive acquisition under a military specification and must comply with MIL-STD-130N for the identification marking of U.S. military property. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition type. The government requires removal of any government identification from non-accepted supplies. Only one unit is requested under purchase request 7017757094, with a delivery deadline of 167 days after award. The solicitation number is SPE8E5-26-T-3783, posted on August 5, 2026, with responses due by August 17, 2026. The procurement falls under NAICS code 326113 and is managed by the Department of Defense through the Warner Robins office, with performance required at Robins AFB, Georgia. Primary point of contact is Khue Nguyen, reachable via email and phone provided.
Unlaminated Plastics Film and Sheet (except Packaging) Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 332313
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1965
The contract specifies the procurement of 3 units of sheet metal with part number 7475T761 and NSN 9535016031832, requiring delivery within 167 days to Robins AFB, Georgia, FOB origin. The unit of issue is each, with a fixed quantity and zero variance permitted. All materials must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling as well as RP001 for DLA-specific packaging standards. Inspection and acceptance both occur at the destination, and the materials must be palletized according to DLA requirements. The delivery is targeted for February 1, 2027, with an original required delivery date of December 16, 2026, and transportation logistics are governed by DLAD proc notes C19 and C20. The contract is issued under solicitation SPE8E4-26-T-1965 with a NAICS code of 332313 and is managed by the Department of Defense through DLA Warner Robins, with Pamela Duffey designated as the primary point of contact.
Plate Work Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, VANEAXIAL
Solicitation # SPE8E7-26-T-3491
The contract solicits 16 vaneaxial fans with NSN 4140-01-533-8424 under solicitation SPE8E7-26-T-3491, issued by the Defense Logistics Agency through the Department of Defense at Warner Robins Air Force Base. The delivery deadline is 188 days after award, with responses due by August 17, 2026. The item is subject to strict export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, which prohibits unauthorized disclosure of technical data to foreign persons anywhere in the world, including foreign national employees and overseas subsidiaries. Access to the technical data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire approvals. Additionally, the offeror must hold CMMC Level 2 certification as a third-party assessment organization and handle covered defense information in accordance with applicable cybersecurity requirements. All communications and performance are managed through the primary point of contact, Kelly Mitchell, at Kelly.Mitchell@dla.mil.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
SOCK, SPRAY
Solicitation # SPE8E6-26-T-4015
The contract specifies the procurement of 7,844 units of SOCK, SPRAY with NSN 4240-01-335-9883 under solicitation SPE8E6-26-T-4015, with a required delivery within 40 days of award, FOB origin, and no tolerance for quantity variance. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling, with palletization following RP001 standards. If the material is deemed hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging compliant with ASTM D3951 is acceptable but still subordinate to DLA’s authoritative standards. Delivery is to be made to DLA Distribution Warner Robins at Robins AFB, Georgia, with the original required delivery date set for November 1, 2026, and a need ship date of June 16, 2026. The contract references DLA procedural notes C19 and C20 for transportation logistics and requires compliance with all applicable defense acquisition regulations, including the removal of government identification from non-accepted supplies and potential handling of covered defense information. The contracting office is under the Department of Defense, with John Lieb listed as the primary point of contact, and the NAICS code 315990 identifies the manufacturer category.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 1 hour ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Shipment Coordination
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Material Safety Data Sheet (SDS) Preparation
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Labeling Services
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details