Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLASTIC SHEET

Active
SPE8E5-26-T-3783Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract is for the procurement of a clear acrylic plastic sheet measuring 60 inches in length, 36 inches in width, and 0.188 inches in thickness, identified by NSN 9330-00-483-3266. The item is to be procured as a fully competitive acquisition under a military specification and must comply with MIL-STD-130N for the identification marking of U.S. military property. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on the acquisition type. The government requires removal of any government identification from non-accepted supplies. Only one unit is requested under purchase request 7017757094, with a delivery deadline of 167 days after award. The solicitation number is SPE8E5-26-T-3783, posted on August 5, 2026, with responses due by August 17, 2026. The procurement falls under NAICS code 326113 and is managed by the Department of Defense through the Warner Robins office, with performance required at Robins AFB, Georgia. Primary point of contact is Khue Nguyen, reachable via email and phone provided.

General Info

Procure one 60x36x0.188 inch acrylic sheet, MIL-STD-130N compliant, delivery due in 167 days at Robins AFB.

Agency

Department Of Defense → WARNER ROBINSView Agency

NAICS

326113 - Unlaminated Plastics Film and Sheet (except Packaging) ManufacturingView NAICS

Place of Performance

BLDG 376, ROBINS A F B, GA, 31098-1887, US

Set-Aside

NONE

Documents

(1)

SPE8E5-26-T-3783.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → WARNER ROBINS
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → WARNER ROBINS
View Agency Profile
Office AddressUS
Contacts
Khue Nguyen
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLASTIC SHEET
PLASTIC SHEET
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
60" LG, 36" W, .188" THK,
CLEAR, ACRYLIC
MIL-STD-130N, 16 Nov 2012 IDENTIFICATION MARKING OF U.S. MILITARY PROPERTY THIS NSN IS PROCURED AS FULLY COMPETITIVE IN ACCORDANCE WITH A MILITARY / FEDERAL SPECIFICATION/STANDARD. SEE NSN/Part Number: 9330-00-483-3266 Quantity: 1 SH Purchase Request: 7017757094QTY: 1 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3785
The contract specifies a plastic sheet manufactured using the cast method from acrylic, with dimensions of 48 inches long by 36 inches wide and a thickness of 0.187 inches. It must be plain, transparent, colorless, and fully comply with Type 1, Class 1, Finish A requirements as defined by MIL-PRF-8184F, and adhere to QPL 8184, with only QPL-approved manufacturers eligible to supply the product at the time of award. The item is classified as a critical application component, and all technical and quality specifications referenced by R-numbers are governed by the DLA Master List of Technical and Quality Requirements, which supersedes any commercial standards such as ASTM D3951. The product must be packaged in accordance with RP001 DLA Packaging Requirements for Procurement and labeled per MIL-STD-129, with hazardous material handling following FED-STD-313 and TQ requirement IP025 if applicable. The contract calls for 21 ship units with zero variance allowed in quantity and requires delivery FOB origin within 167 days, with the final delivery deadline set for February 1, 2027. Inspection and acceptance occur at the destination, and packaging must meet the specified Unit of Issue and Quantity per Unit Pack as outlined in the contract. The delivery destination is DLA Distribution Depot Oklahoma at Tinker AFB, with all transportation subject to DLAD Proc Notes C19 and C20. The solicitation number is SPE8E5-26-T-3785, with a response deadline of August 17, 2026, and the primary point of contact is Brandon Wicker. The NSN 9330-00-634-8636 is linked to a government procurement under a federal solicitation, and the offeror must guarantee that all components originate exclusively from qualified sources on the approved QPL.
DEPOT OKLAHOMA

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3821
The contract is for the procurement of three units of plastic sheeting with NSN 9330-01-550-5779 under solicitation SPE8E5-26-T-3821, with a response deadline of August 17, 2026, and a delivery requirement of 167 days after award. The procurement is managed by the DLA New Cumberland Facility under the Department of Defense and falls under NAICS code 326113 for plastic product manufacturing. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue date for this large acquisition, unless amended. The contract explicitly prohibits the intentional addition of mercury or mercury-containing compounds to the supplied materials, except for specific approved uses such as batteries, fluorescent lights, instrument sensors, weapon systems, and naval chemical reagents as defined by NAVSEA. Any portable fluorescent lamps or instruments containing mercury must be shockproof and include a secondary containment barrier compliant with NAVSEA 5100-003D. Government identification must be removed from non-accepted supplies, and all deliverables must adhere to the specified procurement standards and compliance protocols outlined in the referenced DLA requirements.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC MATERIAL, CELLU
Solicitation # SPE8E5-26-T-3812
The contract pertains to the procurement of cellular plastic material identified by NSN 9330-01-434-7185 and part number 3522N, with a total quantity of 16 yards to be delivered under purchase request 7017757941. Delivery is required within 167 days from the contract date, with FOB origin terms and no tolerance for quantity variance. Inspection and acceptance occur at the destination, and all packaging must comply with DLA’s Packaging Requirements for Procurement, including MIL-STD-129 for marking and labeling. Packaging standards are governed by ASTM D3951 unless superseded by stricter requirements from the DLA Master List of Technical and Quality Requirements, which take precedence. If the material is classified as hazardous per Fed-Std-313, it must be packaged per TQ requirement IP025; otherwise, commercial packaging per SPE8E5-26-T-3812 and ASTM D3951 applies. The unit of issue is yards, and palletization must align with the specified DLA guidelines. The delivery destination is the DDSP New Cumberland Facility in New Cumberland, Pennsylvania, with the required ship date set for February 1, 2027, and the original delivery date February 12, 2027. Transportation logistics are governed by DLAD Proc Notes C19 and C20. All technical and quality requirements reference the DLA Master List, with the applicable revision tied to the solicitation issue date. The solicitation, issued under NAICS code 326113 by the Department of Defense, was posted on August 5, 2026, with responses due by August 17, 2026, and primary point of contact is Don Trachtman.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3790
The contract specifies the procurement of a commercial-grade plastic sheet measuring 48 inches long by 48 inches wide and 0.031 inches thick, with an opaque finish and one side surface-treated for adhesive or ink application. The material must comply with MIL-P-22241B, Type 2, Grade B, and excludes drawing P5029. Sampling and inspection follow MIL-STD-1916 or ASQ H1331 Table 1 with zero non-conformances required unless otherwise stated; unspecified attributes are treated as major with an AQL of 1.0. The item is classified as a critical application requiring source inspection. Packaging must adhere to MIL-STD-129 and either FED-STD-313 for hazardous material per TQ requirement IP025 or ASTM D3951 for non-hazardous material, with DLA Master List requirements taking precedence. Palletization must follow RP001 packaging standards, and the unit of issue is SH with a fixed quantity of 65 units. Delivery is FOB origin with a 49-day lead time, destination inspection and acceptance, and no variance in quantity permitted. The delivery address is Hill AFB, Utah, with the need ship date set for June 4, 2026, and original delivery due by November 5, 2026. The solicitation number is SPE8E5-26-T-3790, with the NSN 9330-01-141-4491 and part number P5100C-03 supplied by Saint-Gobain Performance Plastics Corp.
DEPOT HILL

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3788
The contract specifies the procurement of 3 shipments of skived plastic sheet with a smooth finish, each measuring 36 inches in length, 36 inches in width, and 0.050 inches in thickness, identified by NSN 9330-00-618-1906 and purchase request 7017758037. The material is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which take precedence over ASTM standards. The product must comply with MIL-STD-130N for identification marking and be packaged according to either FED-STD-313 if hazardous or ASTM D3951 if not, with all packaging labeled in accordance with MIL-STD-129 and palletized per RP001 DLA Packaging Requirements. Delivery is FOB origin with no variance allowed in quantity, and the required delivery date is 167 days from the award, with an original required delivery date of November 23, 2026, and a need ship date of February 1, 2027. Inspection and acceptance occur at the destination, and the sole delivery point is the DLA San Joaquin warehouse in Tracy, California. The solicitation was issued under contract number SPE8E5-26-T-3788, with a response deadline of August 17, 2026, and is governed by DLA procedures for transportation and shipping, including specific directives noted in DLAD Proc Notes C19 and C20.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3830
The contract pertains to the procurement of 27 units of plastic sheet with NSN 9330-01-496-1954 under solicitation SPE8E5-26-T-3830, issued by the Defense Logistics Agency through the DDP New Cumberland Facility. Delivery is required within 167 days after order, and responses must be submitted by August 17, 2026. The item is subject to strict export control requirements under ITAR or EAR, prohibiting unauthorized disclosure or transfer of associated technical data to foreign persons or entities, including foreign nationals within the United States. Only contractors with approved US/Canada Joint Certification Program status, completion of required DOD export control training, and DLA authorization may access this data. Compliance with DFARS 252.225-7048 is mandatory. The contracting officer is Khue Nguyen, and the solicitation is categorized under NAICS code 326113 for plastics manufacturing. The contract also requires the vendor to be a CMMC Level 2 certified third-party assessment organization, and covered defense information applies, meaning the contractor must meet specific cybersecurity standards to handle sensitive data.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3779
The contract specifies the procurement of a red surface, white core plastic sheet measuring 1/16 inch thick, 24 inches wide, and 24 inches long, identified by NSN 9330-00-314-8520 and part numbers 248-221 and EZ-GRAVE#160. The requirement mandates strict adherence to DLA Packaging Requirements for Procurement (RP001) and the DLA Master List of Technical and Quality Requirements, which supersede all other standards including ASTM D3951 unless the material is non-hazardous, in which case commercial packaging per ASTM D3951 is acceptable. All packaging and labeling must comply with MIL-STD-129, and palletization must follow RP001 guidelines. The material is subject to inspection and acceptance at the destination, with a fixed quantity of 335 shipping units and zero tolerance for variance in quantity. Delivery is FOB origin with a 167-day lead time, and the required delivery date is December 1, 2026, with a need ship date of February 1, 2027. The plastic sheet must be delivered to the designated receiving warehouse at 25600 S Chrisman Road, Tracy, CA 95304-5000, with transportation protocols governed by DLAD Proc Notes C19 and C20. Hazardous material considerations must follow Fed-Std-313 and TQ requirement IP025 if applicable. The solicitation number is SPE8E5-26-T-3779, issued under NAICS code 326113 by the Defense Logistics Agency District San Joaquin, with a response deadline of August 17, 2026, and primary point of contact Khue Nguyen at khue.nguyen@dla.mil. Unit of issue is SH (shipping unit), and all packaging must reflect the specified QUP of 001. Government identification must be removed from any non-accepted supplies in accordance with RQ011, and covered defense information may apply under RD003.
DLA DIST SAN JOAQUIN

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3804
The contract specifies the procurement of plastic sheeting with a minimum width of 48 inches and a maximum width of 60 inches, a thickness of 0.001 inch, and a minimum length of 500 feet per roll, with a total quantity requirement of 11 rolls, each roll representing 500 square feet, resulting in a total contracted area between 2,000 and 2,500 square feet. The material must be either red or purple in color and must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, which take precedence over other standards. Packaging must adhere to DLA-specific guidelines, including MIL-STD-129 labeling and RP001 packaging requirements, with non-hazardous material to be commercially packaged per ASTM D3951 unless otherwise superseded by DLA standards. The item is identified by NSN 9330-01-225-9550 and must be delivered FOB origin with zero tolerance for quantity variance, inspected and accepted at the destination. The delivery window is 167 days from contract award, with an original required delivery date of November 30, 2026, and a needed ship date of February 1, 2027. All shipments must be sent to the designated parcel post and freight shipping address at the DLA Distribution facility in New Cumberland, Pennsylvania, and transportation must follow DLAD Proc Note C19 and C20. The contract is issued under solicitation SPE8E5-26-T-3804 with a purchase request number 7017758547 and includes provisions for the removal of government identification from non-accepted supplies and potential applicability of covered defense information regulations.
DDSP NEW CUMBERLAND FACILITY

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3683
The contract specifies the procurement of a plastic sheet measuring 94 inches long, 54 inches wide, and 0.047 inches thick with a hair cell finish, identified by NSN 9330-01-044-0456 and part number 57-8163 from SPARTECH LLC, with a total quantity of 634 ship units. Delivery is required within 81 days after receipt of order, with FOB Origin terms and final acceptance occurring at the destination, specifically at DLA Distribution Depot Oklahoma located at Tinker AFB, OK 73145-8000. The item is designated as a critical application item, and covered defense information potentially applies, requiring compliance with safeguarding standards including DFARS 252.204-7008 and 252.204-7012. All packaging must adhere to DLA Master List of Technical and Quality Requirements, which supersede ASTM D3951; non-hazardous materials must be commercially packaged per ASTM D3951 while hazardous materials must follow TQ requirement IP025 as defined by FED-STD-313. Marking and labeling must comply strictly with MIL-STD-129, including U/I and QUP as specified, and palletization must conform to RP001. The solicitation, issued under contract number SPE8E5-26-T-3683, is a total small business set-aside under FAR 19.5 with a NAICS code of 326113, and requires electronic submission via the DIBBS portal by August 3, 2026. Payment will be processed exclusively through WAWF with electronic invoices and receiving reports, and accelerated payments to small business subcontractors are mandated. The contract includes multiple deviation-applied clauses related to employment equity, combating trafficking, sustainable products, hazardous material handling, cybersecurity, and prohibition of covered defense telecommunications equipment. Compliance with NIST SP 800-171 requirements is enforced under a specific deviation, and the contractor must maintain controls for safeguarding covered defense information. The contract contains no option quantities, no award price is listed, and pricing is to be submitted by the offeror; invoicing must align with fixed-price delivery protocols, and inspection occurs at the destination. The contractor is also required to adhere to
DEPOT OKLAHOMA

POSTED

2 days ago

DEADLINE

in about 22 hours
View Details
NAICS: 326113
New
DIBBS
PLASTIC SHEET
Solicitation # SPE8E5-26-T-3754
The contract calls for the procurement of plastic sheets meeting specific military and federal specifications, identified by NSN 9330-01-071-0731. The sheets must be Type I, blue on both sides, with exact dimensions of 10 inches wide, 20 inches long, and 0.005 inches thick, and are to be supplied in a quantity of two sheets. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the applicable revision determined by the solicitation or award date depending on the acquisition size. The procurement is conducted as fully competitive, adhering strictly to established military standards. The solicitation, numbered SPE8E5-26-T-3754, was posted on August 3, 2026, with responses due by August 14, 2026. Delivery is required within 20 days after award, and the place of performance is Point Mugu NAWC, California, with a zip code of 93042-0001. The contracting activity falls under the Defense Logistics Agency, Department of Defense, with Brandon Wicker listed as the primary point of contact, reachable via email and phone. The NAICS code 326113 identifies this as a plastics product manufacturing classification, and all supplies must comply with the requirement that government identification be removed from non-accepted items.
Defense Logistics Agency

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 326113
New
Federal
HDPE Sign Board Manufacturing and SupplyThe contract calls for the manufacture and delivery of high-density polyethylene sign boards measuring three-quarters of an inch thick by forty-eight inches wide by ninety-six inches long, featuring a tri-color configuration in Espresso Brown and Salt Lake Yellow, all in strict compliance with FED-STD-595C color standards. The production must meet detailed dimensional and material specifications to ensure durability and visual consistency for federal use, with emphasis on precise color matching and finish quality. The items are to be delivered to a location with ZIP code 21502, and the contractor must adhere to all applicable federal manufacturing and quality control requirements. This is a subcontract under a Small Business Set Aside classification, designated for businesses certified by the Small Business Administration, with the NAICS code 326113 identifying the industry as plastic product manufacturing. The solicitation was posted on July 31, 2026, with responses due by 6:00 PM on August 14, 2026, and the procuring entity is the Federal Prison Industries under the U.S. Department of Justice. Only small business concerns are eligible to bid, and the work must be performed by a qualified supplier capable of meeting federal standards for material composition, dimensional accuracy, and color specifications without deviation.
Dba Federal Prison Industries United States Department Of Justice

POSTED

5 days ago

DEADLINE

in 9 days
View Details
NAICS: 326113
New
Federal
HDPE Board for Signs
Solicitation # SV0213-26
Federal Prison Industries, operating under the U.S. Department of Justice, is seeking a Firm-Fixed-Price, Indefinite Delivery-Indefinite Quantity contract for two years to supply HDPE board signage measuring three-quarter inch thick by 48 inches by 96 inches, with a composite color scheme of Espresso Brown on the top and bottom and Salt Lake Yellow in the center, conforming to Federal Standard 595C specifications. The total contract volume is 9,556 square feet, with all pricing required to include FOB destination delivery to Unicor in Cumberland, Maryland. This solicitation is a 100% small business set-aside under NAICS code 326113, with a maximum size standard of 750 employees, and requires all offerors to be registered in SAM with a valid UEI. Submissions must include samples shipped to the specified address, detailed technical specifications, warranty terms, price quotations, and acknowledgment of all amendments, with offers due by 2 PM EST on August 14, 2026. The evaluation will prioritize quality and color match, price, past performance, and lead time, following FAR Part 12 and Part 13 procedures. Offerors must hold prices firm for 60 days after the deadline and provide point of contact details, business size certification, and full compliance with all submission requirements via email to wesley.newell2@usdoj.gov, with invoices to be sent to Accounts.payable@usdoj.gov. Any delays in performance must be immediately reported in writing to the contracting officer.
Dba Federal Prison Industries United States Department Of Justice

POSTED

5 days ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → WARNER ROBINS

Same awarding agency

NAICS: 332999
New
DIBBS
PLASTIC STRIP, PRESS
Solicitation # SPE8E5-26-T-3824
The contract specifies the procurement of 6 roll units of plastic strip with pressure-sensitive adhesive coating, identified by NSN 9330-01-580-6367 and referenced under solicitation SPE8E5-26-T-3824, issued by the Defense Logistics Agency. Each roll equals 36 yards, with a total quantity of 216 yards required, to be delivered FOB origin within 167 days from the contract award, with no variance allowed in quantity. Delivery must be made to DLA Distribution Warner Robins at Robins Air Force Base in Georgia, with inspection and acceptance occurring at the destination. Packaging must comply with DLA Packaging Requirements, MIL-STD-129 for marking and labeling, and either ASTM D3951 for non-hazardous material or TQ requirement IP025 if classified as hazardous under FED-STD-313, with DLA's Technical and Quality Requirements taking precedence over any other standard. The product must conform to approved specifications from 3M or Landsberg Kent H Co with specified part numbers. All packaging and palletization must adhere strictly to RP001 guidelines. The contract requires delivery by February 1, 2027, with an original required date of November 12, 2026, and transportation and shipping instructions are governed by DLA Procurement Notes C19 and C20. Point of contact for inquiries is Khue Nguyen of the Department of Defense.
All Other Miscellaneous Fabricated Metal Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331315
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1955
This contract mandates the procurement of titanium alloy sheet metal, specifically 0.012 inch thick, 36 inches wide, and 96 inches long, in a hot rolled, annealed, and descaled condition, weighing approximately 6.759 pounds per sheet, conforming to SAE AMS4911T and AMS4907M standards for alloy 6Al-4V and 6Al-4V (ELI) in annealed condition. The material must be supplied in whole foot lengths only and meet exact dimensional specifications—no test coupons are permitted. Every unit must be clearly marked with the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions, using only approved methods such as stenciling or stamping that ensure legibility, permanence, and non-contamination. A Certificate of Quality Compliance, including mill material certification, must accompany each shipment and be forwarded to the contracting officer. The product is designated as a critical application item with strict compliance requirements under the Qualified Suppliers List for Distributors (QSLD) program, meaning only suppliers listed on the QSLD are eligible to bid, and any deviation or substitution may result in criminal penalties. No source inspection is waived for QSLD-compliant suppliers, and all packaging must adhere to MIL-STD-2073-1E and DLA packaging rules, including robust edge and corner protection, full fiberboard coverage, and MIL-STD-129 marking. Shipment is to be delivered FOB origin to Robins AFB, Georgia, within 113 days, with no tolerance for variance in quantity, and must be palletized with specified material protections.
Aluminum Sheet, Plate, and Foil Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
NONMETALLIC SPECIAL
Solicitation # SPE8E5-26-T-3854
The contract specifies the procurement of a nonmetallic special component with dimensions and shape compliant with Lockheed-Georgia standards, manufactured to meet Lockheed Standard Material Specification STM 23-402 Class 1 Grade 50. The item is subject to strict export control under either ITAR or EAR regulations, prohibiting any transfer, including disclosure to foreign persons regardless of location, without explicit authorization from the Department of State or Department of Commerce. DFARS 252.225-7048 governs the handling of this technical data, and distribution is restricted to DLA contractors with approved US/Canada Joint Certification Program certification, completed DOD export-controlled data training, and approved access through the DLA questionnaire process. The item carries NSN 9390-00-055-4369 with a quantity of 67 LG units, and delivery is required within 167 days after award. The solicitation, identified as SPE8E5-26-T-3854, was posted on August 5, 2026, with responses due by August 17, 2026, under NAICS code 327999. Performance will occur at Robins AFB, Georgia, with Nafis Beyah designated as the primary point of contact. The contractor must maintain CMMC Level 2 certification as verified by a certified third-party assessment organization.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325212
New
DIBBS
NONMETALLIC SPECIAL
Solicitation # SPE8E5-26-T-3808
The contract involves the procurement of NONMETALLIC SPECIAL material with a total quantity of 240 feet, subject to a maximum length of 10 feet per unit, and is identified by NSN 9390-01-346-9299. Technical data associated with this item is controlled under U.S. export regulations, either ITAR or EAR, and its dissemination to foreign persons—regardless of location—is strictly prohibited without prior authorization from the Department of State or the Department of Commerce. Access is restricted to DLA contractors who have obtained US/Canada Joint Certification Program certification, completed mandatory training on handling Defense Department export-controlled technical data, and passed the DLA export-controlled data questionnaire. The material must be delivered within 317 days after contract award, with performance occurring at Robins Air Force Base, Georgia. The solicitation, issued under number SPE8E5-26-T-3808, was posted on August 5, 2026, with responses due by August 17, 2026, and is classified under NAICS code 325212. Primary point of contact is Nafis Beyah at the Defense Logistics Agency, reachable via email and phone provided.
Synthetic Rubber Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331110
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1950
This contract specifies the procurement of titanium alloy sheet metal with exact dimensions of 0.040 inches thick, 36.00 inches wide, and 120.00 inches long, weighing approximately 28.17 pounds per sheet. The material must conform to SAE AMS4901V and SAE AMS2809B standards, with a part number of UNS R50700, hot rolled and annealed, and must be supplied in whole-foot lengths only without test coupons or deviations from dimensional tolerances. The product is designated as a critical application item subject to stringent quality and traceability controls, requiring continuous identification markings on every unit that include the DLA contract number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and full dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contamination risk, with adhesive labels required for smaller profiles. A Certificate of Quality Compliance with mill certification is mandatory for every shipment and must be provided to both the recipient and the DLA contracting officer. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation from this requirement must be explicitly declared, as non-compliance constitutes an unauthorized substitution that may result in criminal penalties. Packaging must adhere to MIL-STD-2073-1E and DLA’s packaging requirements, including robust edge and corner protection, full top and bottom coverage, and compliance with MIL-STD-129 for labeling. The contract mandates shipment to Warner Robins Air Force Base, Georgia, with delivery due in 167 days, and the quantity of five sheets is fixed with zero variance allowance. The solicitation references DLA procurement notes and technical documents governing quality, inspection waivers, and supply chain integrity, and all compliance is enforced at the destination inspection point. The vendor must be an approved QSLD distributor, and direct sales from non-U.S. manufacturers such as Thales are prohibited unless channeled through their authorized U.S. distributor, Oshkosh Truck Corp.
Iron and Steel Mills and Ferroalloy Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 326199
New
DIBBS
PLASTIC MOLDING MAT
Solicitation # SPE8E5-26-T-3852
The contract is for the procurement of 28 units of a Plastic Molding Mat identified by NSN 9330-01-672-6993 and part number 355-03220, supplied by Stratasys, Inc under solicitation SPE8E5-26-T-3852, which is a total small business set-aside. The unit price is $28.00 per EA, with a total contract value of $784.00, and delivery must be made FOB origin within 167 days of contract award, with a required ship date of February 1, 2027, and an original delivery deadline of December 1, 2026. The quantity variance is strictly zero percent, meaning no over or under shipment is permitted. Inspection and acceptance occur at destination, with packaging required to meet DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over ASTM D3951. Non-hazardous material must be commercially packaged in compliance with ASTM D3951, while hazardous material must follow Fed-Std-313 and TQ requirement IP025. All packaging must be marked and labeled per MIL-STD-129, palletized according to RP001 DLA packaging requirements, and shipped to the designated delivery address at Robins AFB, Georgia. Transportation instructions are governed by DLAD Proc Note C19 and C20, and the Unit of Issue and Quantity per Unit Pack must strictly align with the purchase order specifications.
All Other Plastics Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 332313
New
DIBBS
SHEET, METAL
Solicitation # SPE8E4-26-T-1965
The contract specifies the procurement of 3 units of sheet metal with part number 7475T761 and NSN 9535016031832, requiring delivery within 167 days to Robins AFB, Georgia, FOB origin. The unit of issue is each, with a fixed quantity and zero variance permitted. All materials must comply with the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, which take precedence over ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling as well as RP001 for DLA-specific packaging standards. Inspection and acceptance both occur at the destination, and the materials must be palletized according to DLA requirements. The delivery is targeted for February 1, 2027, with an original required delivery date of December 16, 2026, and transportation logistics are governed by DLAD proc notes C19 and C20. The contract is issued under solicitation SPE8E4-26-T-1965 with a NAICS code of 332313 and is managed by the Department of Defense through DLA Warner Robins, with Pamela Duffey designated as the primary point of contact.
Plate Work Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FAN, VANEAXIAL
Solicitation # SPE8E7-26-T-3491
The contract solicits 16 vaneaxial fans with NSN 4140-01-533-8424 under solicitation SPE8E7-26-T-3491, issued by the Defense Logistics Agency through the Department of Defense at Warner Robins Air Force Base. The delivery deadline is 188 days after award, with responses due by August 17, 2026. The item is subject to strict export control under ITAR or EAR, requiring compliance with DFARS 252.225-7048, which prohibits unauthorized disclosure of technical data to foreign persons anywhere in the world, including foreign national employees and overseas subsidiaries. Access to the technical data is restricted to contractors certified under the US/Canada Joint Certification Program, who have completed mandatory DLA training and questionnaire approvals. Additionally, the offeror must hold CMMC Level 2 certification as a third-party assessment organization and handle covered defense information in accordance with applicable cybersecurity requirements. All communications and performance are managed through the primary point of contact, Kelly Mitchell, at Kelly.Mitchell@dla.mil.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 315990
New
DIBBS
SOCK, SPRAY
Solicitation # SPE8E6-26-T-4015
The contract specifies the procurement of 7,844 units of SOCK, SPRAY with NSN 4240-01-335-9883 under solicitation SPE8E6-26-T-4015, with a required delivery within 40 days of award, FOB origin, and no tolerance for quantity variance. All supplies must comply with DLA’s Master List of Technical and Quality Requirements, which supersede ASTM D3951, and packaging must adhere to MIL-STD-129 for marking and labeling, with palletization following RP001 standards. If the material is deemed hazardous per FED-STD-313, it must be packaged according to TQ requirement IP025; otherwise, commercial packaging compliant with ASTM D3951 is acceptable but still subordinate to DLA’s authoritative standards. Delivery is to be made to DLA Distribution Warner Robins at Robins AFB, Georgia, with the original required delivery date set for November 1, 2026, and a need ship date of June 16, 2026. The contract references DLA procedural notes C19 and C20 for transportation logistics and requires compliance with all applicable defense acquisition regulations, including the removal of government identification from non-accepted supplies and potential handling of covered defense information. The contracting office is under the Department of Defense, with John Lieb listed as the primary point of contact, and the NAICS code 315990 identifies the manufacturer category.
Apparel Accessories and Other Apparel Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 484220
New
DIBBS
Domestic and International Shipment Coordination
Specialized Freight (except Used Goods) Trucking, Local

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 541620
New
DIBBS
Hazardous Material Safety Data Sheet (SDS) Preparation
Environmental Consulting Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 561910
New
DIBBS
Military-Grade Packaging and Labeling Services
Packaging and Labeling Services

POSTED

1 day ago

DEADLINE

in 12 days
View Details