This Government Contract opportunity from Florida was posted on July 22, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

Plastic Waste Container Manufacturing & Supply

Closed

State & Local

Submission Closed07/29/2026, 07:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 339999

New

DIBBS

Supply of Life Preserver VestsThis subcontract involves the supply of 128 life preserver vests, specifically NSN 4220015397252, to support prime contractors on Defense Logistics Agency supply contracts. The project is managed under the Department of Defense through Construction and Equipment MRO SVC I, with performance taking place in New Cumberland. The successful provider must deliver the units along with a Certificate of Quality Compliance. Strict adherence to federal standards is required, including packaging per MIL-STD-2073-1E and RP001, and marking per MIL-STD-129. Additionally, the contractor must maintain compliance with the Buy American Act and meet NIST SP 800-171 cybersecurity standards. The response deadline for this opportunity is November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Safety Cone Supplier (NSN 6250-00-334-6183)

Defense Logistics Agency

POSTED

DEADLINE

Supply of Vehicle Cargo Tie-Downs (NSN 3990016198011)This subcontract involves the supply of 109 vehicle cargo tie-downs for prime contractors working on Department of Defense projects through DLA Troop Support. The contractor is responsible for manufacturing or sourcing units that strictly adhere to NSN 3990016198011 and the DLA Master List of Technical and Quality Requirements. All materials must be compliant with the Berry Amendment and the Buy American Act. Operational requirements include specific packaging and marking standards per MIL-STD-129 and ASTM D3951, with palletization following RP001 guidelines. The performance of this contract is centered in New Cumberland, Pennsylvania, under NAICS code 339999. Responses for this requirement are due by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

MIL-SPEC Packaging and Labeling Provider

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Manufacturing and Supply of Identification PlatesThis subcontract involves the manufacture and supply of 50 identification plates for prime contractors supporting DLA Troop Support. The contractor is responsible for fabricating plates according to NSN 9905-01-733-9811 and Parker-Hannifin P/N 92848 specifications, which include specific requirements for etching, engraving, or printing data. All materials must strictly comply with the Buy American Program and the Berry Amendment, with packaging adhering to MIL-STD-129 and RP001 standards. The finished products are to be delivered FOB Origin to the DLA Distribution Depot Hill located at Hill AFB. This Department of Defense requirement falls under NAICS code 339999, with a response deadline set for November 9, 2026.

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors on DLA Weapons Support Land Supply Chain projects. The selected provider will perform military-grade packaging and marking of components in accordance with MIL-STD-2073-1E and MIL-STD-129 standards. Key technical requirements include the use of heat-sealed barrier bags, Special Marking Code ZZ, and the utilization of specialized heat-sealing equipment and military-standard labeling systems to ensure products are ready for FOB Origin shipment. The project is managed under the Department of Defense for the DLA Weapons Support Land Supply Chain, with performance taking place at Fort Bliss, Texas. Interested parties must respond by November 9, 2026, for this opportunity categorized under NAICS code 339999.

DLA WEAPONS SUPPORT LAND SUPPLY CHAIN

POSTED

DEADLINE

Supplier of Seal Replacement Parts Kit (NSN 5330-01-603-0921)This subcontract involves the supply of one complete seal replacement parts kit for mechanical equipment to support prime contractors on DLA Weapons Support Land Supplier Operations projects. The required hardware is identified by NSN 5330-01-603-0921 and Oshkosh Defense LLC part number 26KP749. The contract falls under NAICS code 339999 and is managed by the Department of Defense. The supplier must ensure full compliance with the Buy American and Balance of Payments Program requirements. All items must be packaged according to MIL-STD-129, RP001, and ASTM D3951 standards. Delivery of the completed kit is required FOB Origin to Camp Lejeune, North Carolina.

DLA WEAPONS SUPPORT LAND SUPPLIER OPNS VEHICLE SPT

POSTED

DEADLINE

Identification Marker ManufacturerThis subcontract involves the manufacture and supply of 88 Identification Markers under NSN 7690-01-113-1215 for prime contractors supporting DLA Troop Support. The selected provider must fabricate the markers according to strict NSN specifications, ensuring markings adhere to MIL-STD-129 and special marking code 32 for shelf life. Packaging must be completed in accordance with MIL-STD-2073-1E and RP001, with final delivery terms set as FOB Origin. The project is managed by the Department of Defense through the DDSP New Cumberland Facility. Due to the nature of the work, the contractor must maintain CMMC Level 2, DFARS 252.204-7012, and ITAR/EAR compliance. Interested parties must submit their responses by November 9, 2026, for performance at the New Cumberland location.

DDSP NEW CUMBERLAND FACILITY

POSTED

DEADLINE

Manufacturer of Critical Safety Regulator DiaphragmsThis subcontract involves the manufacture of ten regulator diaphragms for prime contractors supporting DLA Weapons Support ASC projects. The components must be fabricated according to NSN 1660009428088 specifications and produced under a quality management system that complies with either SAE AS9100 or ISO 9001 standards. Because these are classified as Navy Identified Critical Safety Items, the contractor is required to perform zero-based sampling inspections in accordance with MIL-STD-1916 or ASQ H1331. The project is managed by the Department of Defense under the DLA Weapons Support ASC Supplier OEM Division, with the place of performance located in Cherry Point. Interested parties must adhere to the response deadline of November 5, 2026. The contract falls under NAICS code 339999 and focuses on the delivery of fully completed and inspected critical safety hardware.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER OEM DIVISION

POSTED

DEADLINE

MIL-SPEC Packaging and Marking ServicesThis subcontract for MIL-SPEC Packaging and Marking Services supports prime contractors working on projects for the Department of Defense, specifically the DLA Weapons Support Active Devices Division. The scope of work involves providing specialized military-grade packaging and marking to ensure all items are shipment-ready and fully compliant with DLA destination inspection standards. The contractor is required to utilize MIL-SPEC materials and standardized military marking equipment to execute these services. All packaging must be performed in accordance with MIL-STD-2073-1E, while all markings and labels must adhere to MIL-STD-129. This opportunity falls under NAICS code 339999 and has a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Defense-Compliant Packaging and Labeling ServicesThis subcontract opportunity, titled Defense-Compliant Packaging and Labeling Services, is a total small business set-aside issued by the Department of Defense for the DLA Weapons Support ASC Supplier Oper AE and AF Div. The selected provider will be responsible for the final packaging, marking, and labeling of shipments for prime contractors. All work must adhere to strict military and industry standards, specifically ASTM D3951 and RP001 for packaging, and MIL-STD-129 and MIL-STD-130 for markings, utilizing specialized UID marking equipment. The contractor must possess a thorough understanding of the DLA Master List of Technical and Quality Requirements to ensure all assemblies are shipping-ready for worldwide support. This requirement falls under NAICS code 339999. Interested parties should note the response deadline of November 6, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Lock Bolts (NAS1448-29)This subcontract involves the manufacture and supply of eight aerospace lock bolts, specifically Part Number NAS1448-29 and NSN 5340-LN-003-5895, for prime contractors delivering to the DLA Receiving Officer at Naval Base Coronado in San Diego. Because these components are designated as Navy Identified Critical Safety Items, the provider must maintain ISO 9001:2015 and SAE AS9100 certifications. All delivered bolts must be fully inspected and certified, with sampling and inspection conducted according to MIL-STD-1916 or ASQ H1331 standards. The opportunity is managed under the Department of Defense with a response deadline of November 5, 2026.

DLA RECEIVING OFFICER NAVAL BASE CORONADO BLDG

POSTED

about 3 hours ago

DEADLINE

in 8 days

AI Contract Overview

The contract involves the manufacture and supply of fifteen blue, 2-cubic-yard front-load plastic waste containers featuring black lids, designed to meet strict durability and performance standards. Each container must be constructed with UV stabilization to withstand prolonged outdoor exposure, reinforced walls and base to handle heavy loads and harsh handling, integrated lift pockets compatible with standard refuse collection equipment, and a floor drain to facilitate cleaning and prevent water accumulation. Dimensional tolerances are specified to ensure uniformity and compatibility with existing waste collection systems, requiring precise engineering and consistent production quality. The solicitation is issued as a subcontract under NAICS code 339999, with a response deadline of July 29, 2026, and was posted on July 22, 2026. The procurement is managed by the Solid Waste & Environmental Program Management under the state of Florida, though specific city or office details are not provided. Performers must be prepared to meet all technical specifications without deviation, and delivery is expected to align with the operational needs of the agency responsible for waste management services in the region. The contract does not indicate any set-aside provisions and is open to qualified subcontractors capable of fulfilling the manufacturing and supply requirements.

General Info

Fifteen blue 2-cubic-yard front-load plastic waste containers with black lids, UV-stabilized, reinforced, and drain-equipped, for Florida waste program delivery by July 29, 2026.

Agency

Florida → Solid Waste & Environmental Program Management

NAICS

339999 - All Other Miscellaneous Manufacturing

Place of Performance

FL, USA

Set-Aside

NONE

Documents

This scope was carved out of 26-P-00470.

The full solicitation package (3 documents), including the RFP, is on the prime solicitation, not on this scope.

View the prime solicitation

2 Cubic Yard Plastic Front Load Containers

AI Contract Breakdown

Uniform Contract Format

No documents to break down

The breakdown needs solicitation documents. None were found from this contract's source.

Timeline

PhaseClosed

PostedJul 22

subcontract

Response DeadlineJul 29

Deadline has passed

Submission Closed

07/29/2026, 07:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyFlorida → Solid Waste & Environmental Program Management

ContactsNo contacts available

OfficeN/A

Organization / AgencyFlorida → Solid Waste & Environmental Program Management

Office AddressN/A

ContactsNo contact information available

Full Description

Manufacture and supply of 15 blue, 2-cubic-yard front-load plastic waste containers with black lids, meeting UV stabilization, reinforced construction, lift pockets, floor drain, and dimensional tolerance requirements.