Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLATE, BUTT, SHOULDER

Active
SPE7L4-26-T-6208Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract specifies the procurement of four units of a PLATE, BUTT, SHOULDER item with NSN 1005-01-591-5976, supplied by MAGPUL INDUSTRIES CORP under solicitation SPE7L4-26-T-6208. Delivery is required within 20 days FOB origin to Fort Carson, Colorado, with no tolerance for quantity variance, inspection and acceptance occurring at the destination. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129 marking requirements, and palletization must adhere to DLA packaging standards. The item is classified as a defense article subject to the International Traffic in Arms Regulations, requiring the manufacturer to be registered with the Directorate of Defense Trade Controls and to provide proof of registration. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03, and cybersecurity compliance requires a Level 2 self-assessment under the CMMC framework. Demilitarization procedures apply as this item falls under Category I munitions. Shipping must be performed via traceable means, prohibiting parcel post, and all documentation must remain tied to the contract line item. The item is part of a federal acquisition under a DoD agency, and the contract includes technical and quality requirements referenced through the DLA Master List of Technical and Quality Requirements.

General Info

Four PLATE, BUTT, SHOULDER units delivered FOB origin to Fort Carson under ITAR, with DLA packaging, CMMC Level 2, and demilitarization required.

Agency

Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENTView Agency

NAICS

332994 - Small Arms, Ordnance, and Ordnance Accessories ManufacturingView NAICS

Place of Performance

BLDG 9628 AIRFIELD RD, FORT CARSON, CO, 80913-4104, US

Set-Aside

NONE

Documents

(1)

RFQ SPE7L4-26-T-6208 Request for Quotations

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT
View Agency Profile
Office AddressUS
Contacts
KRISTEN ELLIOTT
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE,BUTT,SHOULDER
PLATE,BUTT,SHOULDER
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD001: DEMILITARIZATION: SMALL ARMS WEAPONS AND PARTS AND ACCESSORIES
(CATEGORY I MUNITIONS LIST ITEMS, CATEGORY I-DODM 4160.28-VOL.3)
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
THIS ITEM IS A "DEFENSE ARTICLE" AS DEFINED IN
AND SUBJECT TO THE INTERNATIONAL TRAFFIC IN ARMS
REGULATIONS (22 C.F.R. 120-30) AND THE ARMS
EXPORT CONTROL ACT (22 U.S.C.A. 2778-2799).
ANY MANUFACTURER OR EXPORTER OF DEFENSE ARTICLES
IS REQUIRED TO REGISTER WITH THE DIRECTORATE OF
DEFENSE TRADE CONTROLS (DDTC), DEPARTMENT OF
STATE. DOCUMENTARY EVIDENCE OF REGISTRATION MAY
BE REQUIRED PRIOR TO AWARD. ADDITIONAL EXPORT
RESTRICTIONS APPLY AS INDICATED HEREIN. FAILURE
TO SUBMIT DDTC REGISTRATION WHEN REQUESTED WILL
MAKE A QUOTE/OFFER INELIGIBLE FOR AWARD.
MAGPUL INDUSTRIES CORP. 1LX50 P/N MAG350-BLK
SPE7L4-26-T-6208
SECTION B
PR: 7017784203 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017784203 0001 EA 4.000
NSN/MATERIAL:1005015915976
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:31 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
BULK BREAK POINT:
W33R7X
0404 CS BN CO A0 REAR DET
AWCF SSF
BLDG 9628 AIRFIELD RD
FORT CARSON CO 80913-4104
US
SHIP BY TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
W33R7X
0404 CS BN CO A0 REAR DET
AWCF SSF
BLDG 9628 AIRFIELD RD
FORT CARSON CO 80913-4104
US
MARKFOR
W33R7X
0404 CS BN CO A0 REAR DET
SPE7L4-26-T-6208
SECTION B
PR: 7017784203 PRLI: 0001 CONT’D
AWCF SSF
BLDG 9628 AIRFIELD RD
FORT CARSON CO 80913-4104
US
M/F: (TCN) W56S7P62120005
RDD: 213
PROJ: TP 3
SUPP ADD: W33R7X SIG: J
FOR GOVERNMENT USE ONLY: (IPD) 12
DIC: A3A DIST: ADV: FC: 61
Need Ship Date:00/00/0000 Original Required Delivery Date:08/05/2026
SPE7L4-26-T-6208 NSN/Part Number: 1005-01-591-5976 Quantity: 4 EA Purchase Request: 7017784203QTY: 4 Delivery: 20 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 332994
New
DIBBS
ROD ASSY
Solicitation # SPE4A7-26-T-632L
The contract concerns the supply of a ROD ASSY item identified by part number 123LM10192-1 and NSN 5342001610529, with a quantity of three units to be delivered FOB origin within 166 days, targeting a delivery date of January 31, 2027. The item is classified as a commercial item and a critical application item, subject to stringent quality and cybersecurity requirements including CMMC Level 2 self-assessment and adherence to the DLA Master List of Technical and Quality Requirements referenced by R and I numbers. Physical identification and bare item marking must follow RQ017 and MIL-STD-129 specifications, with no special marking required. Packaging must comply with MIL-STD-2073-1E and DLA Packaging Requirements, using prescribed methods for preservation, wrapping, and containment as detailed in the QUP and packing code U. Sampling and inspection protocols follow MIL-STD-1916 or ASQ H1331 with zero non-conformances required unless otherwise specified, and acceptance occurs at origin with no variance permitted in quantity. The delivery destination is DLA Distribution San Diego at 3581 Cummings Road, Building 3581, San Diego, CA 92136-3581, for both parcel post and freight shipping. The unit price is $3.00, resulting in a total contract value of $9.00. The item has no shelf life restriction. The solicitation number SPE4A7-26-T-632L was issued on August 9, 2026, with responses due by August 17, 2026. The NAICS code is 332994, and the contracting office is the ASC Supplier Oper AE and AF Division under the Department of Defense. The point of contact is Jessica Gentry, reachable via phone and email. All requirements are governed by DoD standards, and transportation logistics must align with DLAD Proc Notes C19 and C20. The item must be delivered by manufacturers or non-manufacturers who meet tailored higher-level quality requirements and comply with inspection and acceptance provisions at the point of origin.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
SUPPORT, CHUTE, AMMUNITI
Solicitation # SPE7L3-26-T-169C
The contract solicitation SPE7L3-26-T-169C requests 21 units of SUPPORT, CHUTE, AMMUNITION with NSN 1005-01-322-1212, to be delivered within 165 days of award. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issue or award date depending on acquisition size. The item is subject to demilitarization controls as a Category I munitions item, and strict cybersecurity compliance is mandated through CMMC Level 2 certification. Packaging must adhere to DLA standards, and tailored higher-level quality requirements apply to both manufacturers and non-manufacturers. Configuration changes require formal engineering change proposals and variance requests, while inspection and acceptance occur at the point of origin. The item must be marked with physical identification, though it is exempt from Unique Item Identification. Components are governed by Qualified Products or Manufacturers Lists, and any non-accepted supplies must have government identification removed. Export-controlled technical data associated with this item is subject to ITAR or EAR regulations, and only DLA-approved contractors with JCP certification, completed training, and authorized access may handle such data. The place of performance is New Cumberland, PA, 17070-5002, and all inquiries should be directed to Katelyn Young at the provided contact information.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
TORQUE TOOL, SEA
Solicitation # SPE7M4-26-T-326C
The contract pertains to the procurement of two torque tools, identified by NSN 4921-01-605-4834, under solicitation SPE7M4-26-T-326C, issued by the Fluid Handling Division of the Department of Defense. Delivery is required within 20 days after award, with performance to occur in Keyport, Washington, 98345-7610. The solicitation was posted on August 9, 2026, with responses due by August 20, 2026. The contractor must be a Cybersecurity Maturity Model Certification (CMMC) Level 2 Certified Third-Party Assessment Organization (C3PAO) to meet the cybersecurity requirements. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location. Access to this controlled data is restricted to contractors holding a valid US/Canada Joint Certification Program certification, who have completed mandatory DOD export control training and questionnaire, and have received explicit approval from the Defense Logistics Agency. The North American Industry Classification System code is 332994, and the primary point of contact is Rory O’Reilly at DLA.
FLUID HANDLING DIVISION

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
BRACKET, FUELING PRO
Solicitation # SPE4A7-26-T-631P
The contract pertains to the procurement of a BRACKET, FUELING PRO with NSN 5342-00-443-5628, for a quantity of 10 units, under solicitation SPE4A7-26-T-631P, with a delivery requirement of 166 days after award. The item must comply with a broad set of technical, quality, and regulatory requirements including CMMC Level 2 certification for the supplier as a third-party assessment organization, adherence to ISO 9001:2015 quality standards, and strict compliance with DLA packaging and inspection protocols. All supplies must be free from intentional addition of mercury or mercury-containing compounds, with specific exceptions for functional uses in batteries, lighting, instruments, sensors, weapon systems, or chemical reagents authorized by NAVSEA, and any such permitted items must include shockproof construction and a secondary containment barrier as mandated by NAVSEA 5100-003D. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons anywhere, including foreign nationals employed by U.S. entities. Access to this controlled data is restricted to contractors who hold an approved US/Canada Joint Certification Program status, have completed required DOD training on export-controlled data handling, and have been formally authorized by DLA. The contract incorporates all relevant requirements from the DLA Master List of Technical and Quality Requirements referenced by R or I numbers. The point of contact for the solicitation is Jessica Gentry of the Department of Defense, and the place of performance is designated as New Cumberland, PA, with the solicitation issued on August 9, 2026, and responses due by August 17, 2026.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE7L1-26-T-945T
This contract pertains to the procurement of 50 units of a firearm component identified by NSN/Part Number 0001S00000053 under solicitation SPE7L1-26-T-945T, with a delivery deadline of 300 days after contract award. The item is subject to stringent technical, quality, and compliance requirements under the DLA Master List of Technical and Quality Requirements, including configuration control via engineering change proposals and variance requests. The supplier must meet tailored quality standards applicable to both manufacturers and non-manufacturers and comply with inspection and acceptance procedures conducted at origin. Components must be sourced from qualified products or manufacturers listed on approved QPLs or QMLs, and the supplier must adhere to DLA packaging specifications. The item is classified as a Category I munition, requiring compliance with militarization protocols and the removal of government identification from non-accepted items. The contract imposes strict controls on technical data, classifying it as subject to ITAR or EAR, prohibiting unauthorized export or disclosure to foreign persons regardless of location. Only DLA contractors with JCP certification, completed export control training, and official DLA authorization may access this data. The use of ozone-depleting chemicals is strictly prohibited, and any substitutes require prior approval. The supplier must also maintain CMMC Level 2 certification as a C3PAO and hold phosphate coating supplier certification. All work must comply with the technical and quality provisions referenced in the DLA Master List, with revisions determined by the solicitation issue date. The point of contact for inquiries is Miguel Acevedo, and performance is to occur in New Cumberland, PA.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
BRACKET, FEED TUBE
Solicitation # SPE4A6-26-T-14PV
The item specified is a bracket for a feed tube, identified by NSN 5342-01-128-1745, with a quantity of 32 units required under purchase request 7015852934. Delivery must be completed within 19 days after delivery order issuance. The solicitation, numbered SPE4A6-26-T-14PV, was posted on August 9, 2026, with responses due by August 17, 2026. This procurement is managed by the ASC Commodities Division under the Department of Defense, with performance occurring at New Cumberland, Pennsylvania, 17070-5002. Primary point of contact is Emma Garrett, reachable via email and phone provided. Technical data associated with this item is subject to export controls under either ITAR or EAR, requiring strict compliance with DFARS 252.225-7048. Disclosure to foreign persons, including employees of U.S. companies or their overseas subsidiaries, is prohibited without prior authorization from the Department of State or Commerce. Access is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed required training on handling defense export-controlled data, and have been formally approved by DLA to access such data. Additional compliance with ISO 9001:2015 quality requirements and DLA packaging standards is mandatory for all manufacturers and non-manufacturers involved.
ASC COMMODITIES DIVISION

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
SHIELD ASSEMBLY, PRO
Solicitation # SPE7L1-26-T-945F
The contract is for the procurement of 19 units of a Shield Assembly, Pro, a critical gun part subject to stringent defense and export control regulations. The item is classified as a defense article under the International Traffic in Arms Regulations (ITAR), requiring all manufacturers and exporters to register with the Directorate of Defense Trade Controls and provide documentary proof of registration prior to award; failure to do so renders an offer ineligible. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions tied to the solicitation or award date depending on acquisition size. The contract mandates that the actual manufacturer and phosphate coating contractor be identified and approved by the Contracting Officer, and any subsequent changes require formal modification. Product Verification Testing may be conducted on each shipment, requiring five samples from each contractor, with one sample potentially destroyed during testing. No Certificate of Conformance is permitted, and inspection will be performed by the DCMA Quality Assurance Representative at the manufacturer’s facility. All manufacturing processes, including phosphate coating, must comply with military specifications and require prior approval of procedures and workmanship specimens by the Post Award Contracting Officer. The contract prohibits the use of Class I ozone-depleting chemicals and imposes strict export controls on technical data under ITAR or EAR, restricting access to only those contractors with approved US/Canada Joint Certification Program status and completed DLA training. Components must originate from Qualified Products or Manufacturers Lists as defined in procurement note H02. Packaging must adhere to DLA standards, and demilitarization procedures apply per Category I munitions guidelines. The contract is a total small business set-aside under NAICS code 332994, with delivery due within 165 days after contract award, and technical data access is tightly controlled to prevent unauthorized disclosure to foreign persons, including U.S.-based subsidiaries.
LAND SUPPLY CHAIN

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
KNIFE, COMBAT
Solicitation # SPE7L3-26-T-168D
The contract specifies the procurement of 15 combat knives manufactured by Benchmade Knife Co. Inc. with part number 9070BK and NSN 1095-01-721-4255 at a unit price of $15.00, totaling $225.00, with delivery required within 10 days FOB origin. The knives must comply with all applicable technical and quality requirements listed in the DLA Master List of Technical and Quality Requirements, and packaging must adhere to ASTM D3951 as supplemented by MIL-STD-129 for marking and labeling, with palletization following DLA’s RP001 packaging standards. Supply chain traceability documentation must be retained per DLA Directive Procurement Note C03 from August 2016, though Item Unique Identification is not required as per the service customer’s request. The goods are to be delivered to Hunter AAF in Georgia with no quantity variance allowed, and inspection and acceptance occur at the destination. Shipment must be sent via the fastest traceable means, explicitly excluding parcel post, and the contract mandates compliance with all government-specific freight, marking, and distribution codes including RDD 555 and project 9GF TP 3. The solicitation number is SPE7L3-26-T-168D, with a required delivery date of August 5, 2026, and the point of contact is Katelyn Young of the Department of Defense.
LAND SUPPLIER OPNS VEHICLE SPT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
MAGAZINE, CARTRIDGE
Solicitation # SPE7L4-26-T-6218
The contract is for the procurement of 10 magazines, cartridge, with NSN 1005-01-678-4950 under solicitation SPE7L4-26-T-6218, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within 191 days after award, with a response deadline of August 20, 2026, and a posting date of August 9, 2026. Technical and quality requirements are governed by the DLA Master List, and the item is subject to stringent defense procurement standards including DLA packaging, measuring and test equipment compliance, and tailored higher-level contract quality requirements for both manufacturers and non-manufacturers. The item is classified as a Category I munitions item under DoDM 4160.28-Vol.3, requiring demilitarization upon disposal. Export control compliance is strictly enforced as the technical data associated with this item is subject to ITAR or EAR regulations, prohibiting unauthorized export or disclosure to foreign persons anywhere, including within the U.S. Contractors must be certified under the US/Canada Joint Certification Program, have completed mandatory DOD export control training and the DLA export-controlled data questionnaire, and receive explicit approval from DLA to access such data. DFARS 252.225-7048 applies, and government identification must be removed from non-accepted supplies. The contract requires CMMC Level 2 certification for the third-party assessment organization handling cybersecurity matters, and all work is performance-based at New Cumberland, Pennsylvania, with Paula Chapman serving as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
DIBBS
COUPLING, CLAMP, GROO
Solicitation # SPE4A7-26-T-635L
The contract pertains to the procurement of 52 units of a grooved coupling and clamp with NSN 5342-00-316-9240, sourced under solicitation SPE4A7-26-T-635L issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. The item is subject to rigorous manufacturing requirements, potentially involving casting or forging processes that may require specialized tooling not held by the government, necessitating a Casting and Forging Assistance Request for sourcing support. Compliance with DLA packaging standards is mandatory, and the item is classified under the NAICS code 332994 for other fabricated metal product manufacturing. Delivery is due in 503 days after contract award, with responses required by August 17, 2026. The item is governed by stringent cybersecurity and export control protocols. The supplier must be certified as a CMMC Level 2 C3PAO and adhere to requirements for handling covered defense information. Technical data associated with this item is subject to ITAR or EAR export controls, prohibiting any transfer to foreign persons or entities without prior authorization from the Department of State or Department of Commerce. Access to such data is restricted to U.S.-based contractors approved by DLA who hold valid JCP certification, have completed mandatory training on handling export-controlled technical data, and have passed DLA’s questionnaire review. All activities must comply with DFARS 252.225-7048, and performance is designated for Robins Air Force Base, Georgia, with Michael Johnson listed as the primary point of contact.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 332994
New
DIBBS
WEAPON MOUNTING BRA
Solicitation # SPE7L4-26-T-6217
The contract pertains to the procurement of one Weapon Mounting BRA, identified by NSN 1005-01-696-2654 and part number EC0R-0108, with a requirement for delivery within 20 days to FOB destination under solicitation SPE7L4-26-T-6217. The item must be packaged in strict compliance with MIL-STD-2073-1E and marked per MIL-STD-129, with no special marking codes applied. Packaging must adhere to DLA’s packaging requirements, and shipment must avoid parcel post, instead utilizing the fastest traceable means. The delivery address is for USS THEODORE ROOSEVELT CVN 71, with a FPO AP 96632 location, and the shipment is designated under RDD 777, requiring vendor use of the VSM system. All technical and quality specifications are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The unit of issue is each (EA), with zero variance allowed on quantity, and inspection and acceptance occur at the final destination. The required delivery date is July 30, 2026, and the contract includes specific government-use only codes for tracking and logistics. The contracting office is the Department of Defense, specifically under the LSO Combat Vehicles and Armament, with Anna-Rachelle Betts listed as the primary point of contact.
LSO COMBAT VEHICLES AND ARMAMENT

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332994
New
SLED
Supply of Universal Emergency Breathing Safety System (UEBSS) KitsThe contract pertains to the supply of Universal Emergency Breathing Safety System (UEBSS) kits designed to be compatible with Self-Contained Breathing Apparatus (SCBA) units. Each kit includes a manifold equipped with a Rectus socket and plug, check valves, and two low-pressure hoses measuring 40 inches and 20 inches in length, ensuring flexible and reliable emergency breathing connections in critical situations. The components are specified to ensure seamless integration with existing SCBA systems, enhancing safety and operational readiness for emergency responders. The solicitation is issued as a subcontract under the NAICS code 332994, which classifies it within the Other Miscellaneous Fabricated Metal Product Manufacturing category. The contract is managed by the Polk County Board of Commissioners in Georgia, with a response deadline of September 16, 2026, at 3:00 PM. While no specific place of performance or point of contact is provided, all bids must be submitted through the designated state procurement portal using the provided link before the deadline. The contract does not include any set-aside provisions, and there is no indication of demographic or small business preferences.
Polk County Board of Commissioners

POSTED

2 days ago

DEADLINE

in about 1 month
View Details

More opportunities from Department Of Defense → LSO COMBAT VEHICLES AND ARMAMENT

Same awarding agency

NAICS: 336360
New
DIBBS
CUSHION, SEAT BACK, V
Solicitation # SPE7L4-26-T-6215
The item is a cushion for a seat back, designated with NSN 2540-01-659-1000, and is being procured in a quantity of one unit under purchase request 7017784238. The solicitation number is SPE7L4-26-T-6215, posted on August 9, 2026, with responses due by August 20, 2026. The contract falls under NAICS code 336360 and is managed by the Department of Defense through the LSO Combat Vehicles and Armament office. Delivery is required within 10 days after delivery order issuance. The technical data associated with this item is subject to export control under either ITAR or EAR, meaning any disclosure of technical information to foreign persons, including foreign nationals within the United States or overseas, requires prior authorization from the Department of State or Department of Commerce. Distribution is restricted to DLA contractors who hold a valid US/Canada Joint Certification Program certification, have completed mandated training on handling DOD export-controlled data, and have been formally approved by DLA. DFARS 252.225-7048 governs the management of this controlled information, and the primary point of contact for inquiries is Anna-Rachelle Betts, reachable via email or phone listed in the contract metadata.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336360
New
DIBBS
BOX, ACCESSORIES STO
Solicitation # SPE7L4-26-T-6216
The contract pertains to the procurement of two units of a box and accessories item identified by NSN 2540-01-734-9195 under solicitation SPE7L4-26-T-6216, with a required delivery date of August 6, 2026, and a 20-day delivery window from the order date. All items must comply with the DLA Master List of Technical and Quality Requirements, which supersede any conflicting specifications, including ASTM D3951, and must be packaged in accordance with MIL-STD-129 labeling and RP001 packaging guidelines, with hazardous materials meeting TQ requirement IP025 and non-hazardous materials following FED-STD-313. The use of Class I ozone-depleting chemicals is strictly prohibited, and any substitute chemicals require prior approval unless explicitly authorized by the specification. Packaging must be commercially compliant, palletized per DLA standards, and clearly marked with the correct Unit of Issue and Quantity per Unit Pack. Delivery is FOB origin, with inspection and acceptance occurring at the destination, and no variance in quantity is permitted. The shipment must be sent by the fastest traceable means—parcel post is prohibited—and must be addressed to the designated military facility in Imperial Beach, California, with the RDD 777 identifier. The contractor is Buyers Products Company DBA 9X737 with part number 1705160, and the contract is issued under a DoD unit of issue as defined by the official DLA unit conversion table. All documentation and reporting must include the designated government control codes and project identifiers for administrative tracking.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336390
New
DIBBS
LATCH, DOOR, VEHICULAR
Solicitation # SPE7L4-26-U-1073
The contract specifies the procurement of a vehicular door latch with NSN 2540-01-609-9677 and part number MIL-2-16924-23, under solicitation SPE7L4-26-U-1073, targeting a total small business set-aside with a NAICS code of 336390. The requirement is for 29 units at a unit price of $29.00, with a total estimated value of $841.00, and delivery must be completed within 80 days, FOB origin, with no tolerance for quantity variance. Inspection and acceptance occur at the destination, and packaging must strictly comply with DLA’s Master List of Technical and Quality Requirements, specifically referencing IP025, MIL-STD-129 for marking and labeling, and either Fed-Std-313 for hazardous materials or ASTM D3951 for non-hazardous items, with DLA standards overriding ASTM where conflicts exist. Palletization and packaging must adhere to RP001 DLA Packaging Requirements for Procurement. The contract is issued by the Department of Defense’s LSO Combat Vehicles and Armament office under a federal solicitation posted on August 9, 2026, with responses due by August 24, 2026. The point of contact is Heather Kessler, and the unit of issue is each (EA), with the quantity per unit pack defined as one. All technical and quality specifications referenced by R or I numbers are incorporated from the DLA Master List, and the applicable revision is determined by the solicitation issue date. Delivery is to be made without government identification removed from non-accepted supplies, and the unit of issue and purchase unit are to be aligned with the official DLA unit of issue documentation. The contract is managed through DLA’s eProcurement systems and the DIBBS platform for solicitation participation.
Other Motor Vehicle Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336211
New
DIBBS
PLATE, SKIRTING, VEHICLE
Solicitation # SPE7L4-26-U-1068
The contract pertains to the procurement of 30 units of a plate, skirting, vehicle suspension with NSN 2510-01-421-4593 under solicitation SPE7L4-26-U-1068. Delivery is required within 89 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. The item must be packaged in strict compliance with MIL-STD-2073-1E, including specific packaging methods, materials, and marking per MIL-STD-129 with the special marking code ZZ indicating an upward arrow, open this side, and mandatory mechanical handling. Technical and quality requirements referenced by R or I numbers must be sourced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation or award date depending on acquisition size. Sampling must adhere to MIL-STD-1916 or ASQ H1331 Table 1 with zero nonconformances required unless otherwise specified, and unspecified attributes are treated as major with corresponding verification levels or AQLs. The item is classified as a critical application item and is subject to CMMC Level 2 Self-Assessment requirements. Material color is green unless otherwise indicated. The supplier is LOC PERFORMANCE PRODUCTS LLC with part number 12365235, and the contract is a DLA Direct, CONUS procurement using the DoD unit of issue. All cybersecurity and packaging obligations are mandatory and enforceable.
Motor Vehicle Body Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 339991
New
DIBBS
RING, WIPER
Solicitation # SPE7L4-26-U-1078
The contract is for the procurement of 5,349 units of a RING, WIPER with NSN 5330-01-493-5202 under solicitation SPE7L4-26-U-1078, issued by the Department of Defense through the LSO Combat Vehicles and Armament office. Deliveries are required within 97 days FOB origin with no tolerance for quantity variance, and inspection and acceptance occur at the destination. The item is classified as a critical application and must comply with all technical and quality requirements referenced in the DLA Master List of Technical and Quality Requirements, identified by R or I numbers. Packaging must adhere to MIL-DTL-117, Type II, Class C, Style 1, using a medium duty, waterproof, greaseproof, and opaque bag to protect against UV deterioration, as stipulated for direct vendor delivery, foreign military sales, and stock shipments. All packaging and marking must follow MIL-STD-2073-1E and MIL-STD-129, with no special marking required. The product must be free of asbestos as defined by FED-STD-313 and palletization must meet DLA packaging standards. Sampling and inspection for conformance must follow MIL-STD-1916 or ASQ H1331 Table 1, or an approved zero-based sampling plan, with critical, major, and unspecified attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. Zero non-conformances are required in the sample lot unless otherwise stated. The manufacturer may elect attribute or variable inspection under MIL-STD-1916, and MIL-STD-105 or ASQ Z1.4 may only be used to determine sample size, not acceptance criteria. Hazardous materials packaging and shipping must comply with IP025. The unit of issue is each, and the contract is issued under DLA Direct, CONUS coverage. The supplier for this item is Greene Tweed & Co Inc, part number 87582. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and the contract is subject to standard DoD procurement procedures and unit of issue conversions.
Gasket, Packing, and Sealing Device Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
CAP, PROTECTIVE, NUT AN
Solicitation # SPE7L4-26-T-6214
This contract specifies the procurement of 10 protective nut caps with NSN 5340-01-695-4518 and part number 4359775 for BAE Systems Land & Armaments L.P. under solicitation SPE7L4-26-T-6214, issued by the Department of Defense through DLA. The items must comply with technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements, identified by R and I numbers, and packaging must adhere to MIL-STD-2073-1E and DLA packaging guidelines, including MIL-STD-129 marking with no special marking codes. Delivery is required FOB origin within 165 days, with a specified ship date of February 2, 2027, and no tolerance for quantity variance. Inspection and acceptance occur at the destination, with packaging requiring unit containers coded D3, intermediate containers coded E5, and palletization in accordance with DLA requirements. The delivery address is DLA Distribution Albany at 814 Radford Blvd, Building 1221, Door 20, Albany GA 31704-1128, and transportation logistics follow DLA procedure notes C19 and C20. The unit price is $10.00 per piece, totaling $100.00, with the purchase request number 7017776237 and unit of issue as each. The contract is managed by Anna-Rachelle Betts of LSO Combat Vehicles and Armament, with contact information provided for inquiries.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 332510
New
DIBBS
CLAMP, LOOP
Solicitation # SPE7L4-26-U-1070
The contract pertains to the procurement of 33 CLAMP, LOOP units with NSN 5340-01-284-2451 under solicitation SPE7L4-26-U-1070, with a response deadline of August 24, 2026, and a delivery requirement of 116 days after order. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective as of the solicitation issue date or award date depending on acquisition size. Packaging must comply with DLA standards, and any non-accepted supplies must have government identification removed. Technical data associated with this item is subject to export controls under either ITAR or EAR, prohibiting unauthorized disclosure to foreign persons regardless of location, including to foreign national employees or subsidiaries of U.S. companies. Access to this controlled data is restricted to contractors who hold valid US/Canada Joint Certification Program certification, have completed required DLA export control training and questionnaire, and have received explicit approval from the DLA controlling authority. The acquiring organization is the Department of Defense through LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact, and the procurement falls under NAICS code 332510 with no set-aside classification.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336360
New
DIBBS
MIRROR HEAD, VEHICULAR
Solicitation # SPE7L4-26-U-1071
This contract is for the procurement of 96 vehicular mirror heads under solicitation SPE7L4-26-U-1071, with a unit price of $96.00 per item and a total value of $9,216. The delivery timeline is 80 days from the award date, with delivery terms set at FOB origin, meaning the supplier is responsible for the item until it leaves their facility. The quantity is fixed with no variance permitted—neither plus nor minus zero percent—and inspection and acceptance occur at the destination. All items must comply with DLA’s packaging requirements as outlined in RP001 and MIL-STD-2073-1E, specifying packaging methods, materials, and unit container types, while marking must adhere to MIL-STD-129 with no special marking required. The item is identified by NSN 2540-01-706-8157 and part number 2638846, supplied by Polaris Sales Inc. The contract explicitly prohibits the use of Class I ozone-depleting chemicals in any component, overriding any conflicting specification requirements but not exempting the product from meeting performance standards; any substitute chemicals must be pre-approved unless already authorized by the specification. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, with the controlling revision determined by the solicitation or award date depending on acquisition size. The unit of issue is each (EA), and the contract is issued under a simplified acquisition process with a response deadline of August 24, 2026, and a posted date of August 9, 2026. The responsible agency is the Department of Defense, specifically the LSO Combat Vehicles and Armament office, with Karryn Hoston as the primary point of contact.
Motor Vehicle Seating and Interior Trim Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332912
New
DIBBS
CONTROL, REEL
Solicitation # SPE7L4-26-T-6212
The contract pertains to the procurement of CONTROL, REEL with NSN 8130-01-460-6614 and part number 12364610-15, for a quantity of 8 units at a unit price of $8.00, totaling $64.00. Delivery is required within 165 days from the contract award, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance both occur at the destination, and the items must be packaged in compliance with ASTM D3951, subject to precedence of the DLA Master List of Technical and Quality Requirements. All packaging and labeling must adhere to MIL-STD-129, and palletization must follow RP001: DLA Packaging Requirements for Procurement. The sole delivery address is the DLA Distribution facility at New Cumberland, PA, with transport governed by DLAD Proc Notes C19 and C20. The original required delivery date is April 25, 2027, with a need ship date of February 2, 2027. The solicitation number is SPE7L4-26-T-6212, issued by the Department of Defense under the NAICS code 332912, with Anna-Rachelles Betts as the primary point of contact. Proprietary data and insufficient competitive information are noted, and the contract references DLA’s authorized unit of issue and associated conversion standards.
Fluid Power Valve and Hose Fitting Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336310
New
DIBBS
CAPASSEMBLY
Solicitation # SPE7L4-26-U-1075
This contract, issued under solicitation SPE7L4-26-U-1075, is a total small business set-aside for the procurement of one item identified by NSN 2910-01-485-7711 and part number 75290-01, with an estimated quantity of 149 units at a unit price of $149.00, totaling $22,201. The contract mandates strict adherence to DLA Packaging Requirements for Procurement, including compliance with ASTM D3951 for packaging and MIL-STD-129 for marking and labeling, with all DLA Master List of Technical and Quality Requirements taking precedence. Delivery is required FOB origin within 74 days, with no variance allowed in quantity, and inspection and acceptance occur at the destination. The unit of issue is each, and palletization must conform to DLA standards. The item is covered under DLA Direct, CONUS, and is subject to all applicable federal acquisition regulations. The solicitation was posted on August 9, 2026, with responses due by August 24, 2026, and is managed by the Department of Defense’s LSO Combat Vehicles and Armament under NAICS code 336310, with primary point of contact Heather Kessler available for inquiries.
Motor Vehicle Gasoline Engine and Engine Parts Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 332510
New
DIBBS
BRACKET, ANGLE
Solicitation # SPE7L4-26-U-1072
The contract pertains to the procurement of a BRACKET, ANGLE with NSN 5340-01-481-8190 and part number 23-09130-007, under solicitation SPE7L4-26-U-1072, issued by the Department of Defense’s LSO Combat Vehicles and Armament office. The requirement is for 129 units, each priced at $129.00, totaling $16,641.00, with delivery expected within 116 days FOB origin and no tolerance for quantity variance. The item is covered under DLA Direct, CONUS, with inspection and acceptance points set at the destination. Packaging must comply with DLA’s Master List of Technical and Quality Requirements, which override ASTM D3951, and adhere strictly to MIL-STD-129 for marking and labeling. If the material is non-hazardous, it must be commercially packaged per ASTM D3951, but if hazardous per FED-STD-313, packaging must follow TQ requirement IP025. All packaging and palletization is governed by RP001, DLA Packaging Requirements for Procurement. The solicitation is a total small business set-aside under NAICS code 332510, with responses due by August 24, 2026, and was posted on August 9, 2026. Primary point of contact is Heather Kessler, reachable via email and phone as provided.
Hardware Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details
NAICS: 336330
New
DIBBS
PARTS KIT, BALL JOINT
Solicitation # SPE7L4-26-U-1080
The contract pertains to a Parts Kit, Ball Joint, identified by NSN 2530-01-668-5704 and part number 4364830, with a quantity of 12 kits delivered under solicitation SPE7L4-26-U-1080. Delivery is required within 75 days FOB origin with no variance allowed in quantity, and inspection and acceptance occur at the destination. Packaging must comply with MIL-STD-2073-1E Appendix D for kits and conform to DLA packaging requirements, with marking in accordance with MIL-STD-129. The unit of issue is KT (kit), and all preservation and packaging methods must adhere to the specified military standards using designated materials and codes. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions controlled by the solicitation issue date. The contract is issued by the Department of Defense under LSO Combat Vehicles and Armament, with Heather Kessler as the primary point of contact. This is a direct DLA acquisition within the continental United States, and the solicitation response deadline is August 24, 2026.
Motor Vehicle Steering and Suspension Components (except Spring) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 15 days
View Details