Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, July 22 at 2:00 PM EDT

Register Free →
logo
Get CLEATUSFree Trial

PLATE, CLAMP, GEARBOX

Active
SPE8EF-26-T-1459Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of one unit of a PLATE, CLAMP, GEARBOX with NSN 1730-01-611-1913 under solicitation SPE8EF-26-T-1459, issued by the Defense Logistics Agency for the Department of Defense. Delivery is required within five days of award, FOB origin, with no variance allowed in quantity and inspection and acceptance occurring at the destination. The item must be packaged in accordance with ASTM D3951 and labeled per MIL-STD-129, with palletization following DLA-specific packaging requirements, and all technical and quality specifications referenced by R or I numbers from the DLA Master List of Technical and Quality Requirements take precedence over any general standards. The supplier must comply with tailored higher-level contract quality requirements, including configuration change management and variance requests, and conform to zero-defect sampling standards under MIL-STD-1916 or equivalent, with critical, major, and minor attributes assigned verification levels VII, IV, and II or AQLs of 0.1, 1.0, and 4.0 respectively. The item is to be delivered to Marine Aviation Logistics Squadron 39 at Camp Pendleton, California, with shipment required via traceable means not including parcel post, and transportation governed by DLAD PROC NOTES C19 and C20. The contract lists three approved suppliers—Bishop Lifting Products Inc, FORM FIT & FUNCTION LLC, and SEYER INDUSTRIES, INC.—all offering the same part number 449-240-006-113. The original required delivery date is July 10, 2026, with a project code of BK0 TP 1 and a government-only identifier indicating specific administrative controls. Contract data confirms the NAICS code 336413 for Aerospace Product and Parts Manufacturing, and the point of contact for inquiries is Russell Keiser, with the official solicitation details accessible through the DIBBS portal. All supply chain and packaging actions must align with documented DLA directives, ensuring full compliance with defense logistics standards.

General Info

Deliver one gearbox clamp to Camp Pendleton by July 10, 2026, per DLA packaging and quality specs.

Agency

Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CONView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

PO BOX 555761, CAMP PENDLETON, CA, 92055-5761, US

Set-Aside

NONE

Documents

(1)

SPE8EF-26-T-1459.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → CONSTRUCTION & EQUIPMENT MANU & CON
View Agency Profile
Office AddressUS
Contacts
Russell Keiser
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE,CLAMP,GEARBOX
PLATE,CLAMP,GEARBOX
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
SAMPLING:
THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ
H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE
SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION,
STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR
AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF
VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED
ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE
SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER
MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR
PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT
SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT
UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
BISHOP LIFTING PRODUCTS INC 0CR59 P/N 449-240-006-113
FORM FIT & FUNCTION LLC 1P6K0 P/N 449-240-006-113
SEYER INDUSTRIES, INC. 19494 P/N 449-240-006-113
SPE8EF-26-T-1459
SECTION B
PR: 7017457002 PRLI: 0001 CONT’D
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017457002 0001 EA 1.000
NSN/MATERIAL:1730016111913
DELIVERY (IN DAYS):0005
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA-QUP:001
WILL BE PACKAGED IN ACCORDANCE WITH ASTM D3951.
All DLA Master List of Technical and Quality Requirements take precedence over ASTM D3951. Mark and label all packaging and packing in accordance with MIL-STD-129. The Unit of Issue (U/I) and Quantity per Unit Pack (QUP) will be as specified in the contract/purchase order. PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
R09808
MARINE AVIATION LOGISTICS SQDN 39
MALS-39 MAG-39 3D MAW
PO BOX 555761
CAMP PENDLETON CA 92055-5761
US
VESSEL SHIPMENT. TRANSPORTATION SEE DLAD PROC NOTE C19. FIRST DESTINATION TRANSPORTATION SEE DLAD PROC
NOTE C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
R09808
MARINE AVIATION LOGISTICS SQDN 39
MALS-39 SUPPLY MAG-39 3D MAW
BLDG 23122 SUPPLY CIRCLE
CAMP PENDLETON CA 92055-5761
US
RDD(3-POS RDD)/NMCS SHIPMENT. SHIP BY FASTAST TRACEABLE MEANS. DO NOT USE PARCEL POST.
M/F: (TCN) R098086188G576
SPE8EF-26-T-1459
SECTION B
PR: 7017457002 PRLI: 0001 CONT’D
RDD: N
PROJ: BK0 TP 1
SUPP ADD: SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A4A DIST: 9B ADV: FC: 7L
Need Ship Date:00/00/0000 Original Required Delivery Date:07/10/2026
SPE8EF-26-T-1459 NSN/Part Number: 1730-01-611-1913 Quantity: 1 EA Purchase Request: 7017457002QTY: 1 Delivery: 5 days ADO

Similar Contracts

NAICS: 336413
New
DIBBS
SKIN, AIRCRAFTThis contract pertains to the procurement of 32 aircraft skins with NSN 1560-01-729-7386 under solicitation SPE4A7-26-Q-0647, with a delivery requirement of 250 days after award. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. The supplier must be a Cybersecurity Maturity Model Certification Level 2 certified Third-Party Assessment Organization and comply with all documentation requirements for source approval requests. Covered Defense Information is applicable, and the item is subject to export control under ITAR or EAR, requiring prior authorization for any disclosure or transfer to foreign persons, including foreign nationals within the U.S. or overseas. Access to controlled technical data is restricted to contractors holding a valid US/Canada Joint Certification Program credential, having completed mandatory DOD export control training, and been formally approved by DLA. Packaging must adhere to DLA specifications, and quality requirements include tailored higher-level standards, inspection and acceptance at origin, proper physical identification and marking of items, removal of government identification from non-accepted supplies, and formal engineering change proposal procedures for any deviations. All technical data associated with this item is protected under DFARS 252.225-7048, and strict controls are enforced on its handling and distribution.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
CONNECTOR, ROD END, AThe contract is for the procurement of 72 units of Connector, Rod End, A, with NSN 1640-01-656-6102 and part number 721-011, under solicitation SPE4A6-26-T-05PW. Delivery is required within 85 days of contract award, with shipment FOB origin and inspection and acceptance occurring at the destination. The unit price is $72.00 per unit, resulting in a total contract value of $5,184.00. The item is designated as a Critical Application Item and must comply with FAA Airworthiness requirements, though Unique Identification is not mandated per customer request. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, and must adhere to current revisions effective on the solicitation or award date depending on acquisition size. The product must be packaged and marked in strict compliance with MIL-STD-2073-1E and MIL-STD-129, using packaging code U and preservation method 10, with no special marking required. Palletization follows DLA packaging guidelines, and supply chain traceability documentation must be retained by the contractor per DLA Directive Procurement Note C03, as the item is subject to Federal Aviation Administration airworthiness certification criteria. Sampling procedures must conform to MIL-STD-1916 or ASQ H1331, Table 1, with zero non-conformances required for acceptance unless otherwise stipulated. Attributes are to be classified with specified verification levels or AQLs, and unspecified features default to major status. All items must be delivered to the DLA Distribution facility in New Cumberland, Pennsylvania, with a required ship date of December 7, 2025, and an original delivery deadline of April 8, 2026. The contract prohibits quantity variance, and transportation logistics are governed by DLA Procurement Notes C19 and C20.
ASC COMMODITIES DIVISION

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
FITTING, TRIPODThe contract pertains to the procurement of a single Fitting, Tripod, identified by NSN 1560-00-346-2367 and part number 212-061-105-1, under solicitation SPE4AC-26-T-0070, issued by the Department of Defense’s CCAD Detachment. Delivery is required within 20 days of award, with shipment originating from the supplier and delivered FOB origin to Eglin AFB, Florida, under strict zero variance tolerance on quantity. Inspection and acceptance occur at the destination, and packaging must adhere to DLA’s master requirements, including MIL-STD-129 for marking and labeling, with ASTM D3951 or FED-STD-313 compliance based on hazardous material status—all superseded by DLA’s technical and quality standards. The item may require casting or forging, and suppliers must request tooling or material support through DLA’s designated channels if government-provided resources are unavailable. The contract mandates zero-defect sampling under MIL-STD-1916 or ASQ H1331, with inspection levels and AQLs defined for critical, major, and minor attributes, and permits only zero non-conformances unless otherwise stated. Cybersecurity requirements include a CMMC Level 2 self-assessment, and all items must be physically marked in accordance with RQ017. Shipping must utilize traceable freight methods, explicitly excluding parcel post, with freight address and government identifiers specified for logistics coordination. The unit of issue is each, priced at a fixed total, and the required delivery date is May 19, 2026. All technical, quality, and packaging requirements referenced through R-numbers are governed by the DLA Master List of Technical and Quality Requirements effective on the solicitation issue date.
CCAD DETACHMENT

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details
NAICS: 336413
New
DIBBS
ELECTRONIC COMPONENThis contract pertains to the procurement of 34 units of electronic components identified by NSN 5998-01-285-9174 under solicitation SPE7M1-26-T-208E, with a delivery requirement of 546 days after delivery order. The solicitation was posted on July 13, 2026, and responses are due by July 24, 2026. Technical and quality requirements are controlled by the DLA Master List of Technical and Quality Requirements referenced by R and I numbers, with the applicable revision determined by the solicitation issue date for simplified acquisitions or the RFP issue date for large acquisitions, unless amended. The contract incorporates stringent cybersecurity and export control mandates, requiring CMMC Level 2 certification by a C3PAO and strict adherence to ITAR or EAR regulations due to the presence of controlled technical data. Any disclosure of this data to foreign persons, including foreign nationals within the U.S. or overseas, requires prior government authorization. Access to export-controlled technical data is limited to contractors with approved US/Canada Joint Certification Program status, completed DOD training on export-controlled data handling, and DLA approval. Packaging must meet DLA specifications, and any configuration changes require formal engineering change proposals. Government identification must be removed from non-accepted supplies, and deviations or waivers must be formally requested. The place of performance is New Cumberland, Pennsylvania, with Ryan Snyder of the Department of Defense's Maritime Supply Chain as the point of contact.
MARITIME SUPPLY CHAIN

POSTED

about 9 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
STRINGER, ZEEThe contract pertains to the procurement of 57 units of STRINGER, ZEE with NSN/Part Number 1560-01-078-9959 under solicitation SPE4A7-26-T-566Q, issued by the Department of Defense through the ASC SUPPLIER OPER AE AND AF DIV. Delivery is required within 148 days from award, and the place of performance is Tinker AFB, 73145-8000. Technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, with revisions effective on either the solicitation issue date or award date depending on acquisition size. The item is subject to stringent documentation controls including Source Approval Request requirements, DLA packaging standards, and CMMC Level 2 certification for third-party assessors. Configuration changes require formal Engineering Change Proposal requests, and inspection and acceptance must occur at the origin. Export control applies to associated technical data under ITAR or EAR, restricting disclosure to foreign persons and requiring compliance with DFARS 252.225-7048; access is limited to contractors with approved US/Canada Joint Certification Program status, completed DLA export control training, and formal authorization. The item is exempt from Item Unique Identification as per customer request, and government identification must be removed from non-accepted supplies. Technical data and engineering exceptions are incorporated via referenced drawings and documents.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 9 hours ago

DEADLINE

in 8 days
View Details