Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, August 19 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLATE, METAL

Active
SPE8E4-26-T-1967Federal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

The contract pertains to the procurement of a metal plate identified by part number 60205469-00 and NSN 9515251604478, with a quantity of 51 units priced at $51.00 each, totaling $2,601.00. Delivery is required within 167 days from the contract issuance, with FOB origin terms and no variance allowed in quantity. Inspection and acceptance occur at the destination, and packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including special marking code ZZ for additional requirements. Packaging and shipment must adhere to DLA Packaging Requirements for Procurement and IP083 standards for metal products, with palletization specified accordingly. The item must be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and original delivery deadline of February 10, 2027. Cybersecurity requirements mandate compliance with CMMC Level 2 Self-Assessment, and the contract incorporates technical and quality standards referenced in the DLA Master List of Technical and Quality Requirements. Covered Defense Information applies, and the contract is issued under solicitation SPE8E4-26-T-1967 by the Department of Defense through the DDSP New Cumberland Facility, with Pamela Duffey as the primary point of contact.

General Info

51 metal plates, part 60205469-00, $51 each, deliver to New Cumberland by Feb 10, 2027, CMMC Level 2, MIL-STD compliant.

Agency

Department Of Defense → DDSP NEW CUMBERLAND FACILITYView Agency

NAICS

331221 - Rolled Steel Shape ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, US

Set-Aside

NONE

Documents

(1)

SPE8E4-26-T-1967.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → DDSP NEW CUMBERLAND FACILITY
Contacts1 person available
OfficeUS
Organization / Agency
Department Of Defense → DDSP NEW CUMBERLAND FACILITY
View Agency Profile
Office AddressUS
Contacts
Pamela Duffey
contact@example.gov
+1 (555) 000-0000

Full Description

Show more
PLATE,METAL
PLATE, METAL
P/N 60205469-00
CAGE N0013,,
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD002, COVERED DEFENSE INFORMATION APPLIES
KONGSBERG DEFENCE & AEROSPACE AS N0013 P/N 60205469-00
TDP Rev A Gen 1 IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017756890 0001 EA 51.000
NSN/MATERIAL:9515251604478
DELIVERY (IN DAYS):0167
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
SPE8E4-26-T-1967
SECTION B
PR: 7017756890 PRLI: 0001 CONT’D
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:ZZ CLNG/DRY:0 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0
UNIT CONT:00 OPI:M
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
IP083: Packaging, Marking, and Shipping of Metal Plating, Sheets, and other Metal Products
PARCEL POST ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
FOR TRANSPORTATION SEE DLAD DLAD PROC NOTE C19. FOR FIRST DESTINATION TRANSPORTATION SEE DLAD PROC NOTE
C20 AND CONTRACT
FREIGHT SHIPPING ADDRESS:
W25G1U
W1A8 DLA DISTRIBUTION
DDSP NEW CUMBERLAND FACILITY
2083 NORMANDY DRIVE DOOR 113 TO 134
NEW CUMBERLAND PA 17070-5002
US
Need Ship Date:02/01/2027 Original Required Delivery Date:02/10/2027
SPE8E4-26-T-1967 NSN/Part Number: 9515-25-160-4478 Quantity: 51 EA Purchase Request: 7017756890QTY: 51 Delivery: 167 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 331221
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-T-1952
This contract specifies the procurement of steel bars composed of Steel Comp 630, round in shape, centerless ground, with a diameter of 2.250 inches and lengths between 10 and 12 feet in whole-foot increments only, weighing approximately 13.520 pounds per foot. The material must comply with technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, including the Certificate of Quality Compliance which must accompany each shipment and be forwarded to the contracting officer. Continuous identification markings are mandatory on every unit, including the DLA contract delivery order number, NSN, specification revision, grade, alloy, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stenciling or stamping using waterproof, non-contaminating fluids that remain legible and stable under normal handling; adhesive labels are required for bars under 0.250 inches in nominal OD. Packaging must conform to MIL-STD-2073-1E and MIL-STD-129 with special codes Z and ZZ as defined by ASTM A700, and palletization must follow DLA packaging directives. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96, and failure to comply renders the bid non-compliant and subject to rejection. Suppliers not on the QSLD must explicitly declare their deviation, and any product sourced from an unauthorized distributor is considered an unauthorized substitution with potential criminal penalties. The technical data package references SAE AMS5643W and SAE AMS2806, and the contract requires CDRL-METALSCERT documentation. Delivery is FOB origin with a 167-day deadline, a 10% variance in quantity allowed, inspection and acceptance occurring at destination, and shipment destination specified as DLA Distribution San Diego. The solicitation number is SPE8E4-26-T-1952, the NSN is 9510-00-500-5434, and the quantity ordered is 58 linear feet with a unit price of $58.00 per foot, totaling $3,364.00. The requirement is classified as a critical application item under a federal procurement with specific handling, marking, and certification obligations enforced by the Department of Defense.
SAN DIEGO

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331221
New
DIBBS
PLATE, METAL
Solicitation # SPE8E9-26-T-3290
This contract specifies the procurement of corrosion-resistant stainless steel plate, ASTM A240 Grade 304, hot rolled and annealed, with exact dimensions of 0.250 inches thick, 50.000 inches wide, and 144 inches long, weighing approximately 522.0 pounds per piece. The material must be supplied in whole-foot increments only, with no tolerance for test coupons or dimensional deviations. Every shipment requires a Certificate of Quality Compliance, which must accompany the product and be forwarded to the DLA Troop Support Contracting Officer. Each unit must be permanently marked with specific data including the DLA contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot number, and dimensions. Markings must be legible, waterproof, and applied via stamping or stenciling without contamination, and adhesive labels are required in lieu of line markings. Packaging and marking must strictly adhere to MIL-STD-2073-1E and MIL-STD-129R, with preservation methods conforming to ASTM A700. The product is designated as a Critical Application Item and must comply with the Qualified Suppliers List for Distributors (QSLD), meaning only approved distributors may supply the material—substitutions are prohibited and may incur criminal penalties. The contract mandates delivery of three units within 167 days to Tinker AFB, Oklahoma, with inspection and acceptance occurring at destination. All documentation, including CDRL-METALSCERT and Technical Data Package requirements, must reference current revisions of referenced standards and are governed by the DLA Master List of Technical and Quality Requirements.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331221
New
DIBBS
STRIP, METAL
Solicitation # SPE7M0-26-Q-1148
The contract specifies the procurement of low-carbon cold-rolled steel strip measuring 0.0625 inches thick, 2 inches wide, and lengths between 96 and 192 inches, with a weight of 0.425 pounds per foot, as identified by NSN 9515-00-516-5739. The material must conform to ASTM A109/A109M and SAE AMS2807C standards, with temper 4 and finish 2, and must be supplied in whole-foot increments only. All units require continuous identification markings including the contract delivery order number, NSN, specification revision, alloy and temper details, manufacturer’s name, heat and lot numbers, and exact dimensions. Markings must be applied via stenciling or stamping, be legible, waterproof, and non-contaminating, while adhesive labels are permitted for narrow strips under 0.250 inches nominal OD. A Certificate of Quality Compliance, or mill material certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. The contract mandates strict compliance with the Qualified Suppliers List for Distributors (QSLD), restricting award eligibility exclusively to suppliers listed on the official DLA QSLD roster; any deviation or use of non-approved sources constitutes an unauthorized substitution and may result in criminal penalties. Packaging must follow MIL-STD-2073-1E and ASTM A700 specifications, with special codes Z and ZZ applied for preservation and marking as required. Markings must adhere to MIL-STD-129, including dual-unit quantities where applicable, and all shipments must avoid parcel post, instead using traceable freight methods. The delivery point is Puget Sound Naval Shipyard, with a firm fixed price and zero tolerance for quantity variance. Inspection and acceptance occur at destination, and the material must be delivered within 30 days after award. The contract also designates this item as a critical application, with a specific requirement for eight-foot continuous lengths for use on the USS Abraham Lincoln (CVN-72).
MARITIME SUPPLY CHAIN ESOC BUYS

POSTED

about 2 hours ago

DEADLINE

in 8 days
View Details
NAICS: 331221
New
DIBBS
BAR, METAL
Solicitation # SPE8E9-26-Q-0646
This procurement solicitation is for 90 feet of cold finish, annealed steel bar, 0.750 inch diameter, with strict adherence to technical and quality standards under DLA regulations. The material must comply with SAE AMS6448N and SAE AMS2806 specifications, and a Certificate of Quality Compliance must accompany each shipment, with a copy submitted to the DLA Troop Support Contracting Officer. Every unit must be clearly marked with the DLA delivery order number, NSN, specification revision, grade, alloy, manufacturer details, heat and lot numbers, and dimensions using stamping or stenciling that is legible, waterproof, and non-contaminating; adhesive labels are permitted for small-diameter bars, tubes, and shapes under 0.250 inch nominal OD. Material must be supplied in whole-foot lengths only and meet exact dimensional tolerances. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible to respond, and any deviation or use of non-approved distributors constitutes an unauthorized substitution, subject to potential criminal penalties. Packaging, marking, and shipping must follow MIL-STD-2073-1E, MIL-STD-129, and ASTM A700, with special preservation code ZZ applied per MIL-STD-163. The delivery point is the destination, with FOB origin and a firm fixed price, zero variance in quantity, and a 60-day delivery window from award date. All shipments must be sent via fastest traceable means, excluding parcel post, and directed to Fort Bliss, Texas. Quality conformance inspections and supplier inspection requirements are waived for QSLD-compliant offers, but strict compliance with marking, certification, and qualification rules is mandatory, and noncompliance will result in rejection of the product.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 7 days
View Details
NAICS: 331221
New
DIBBS
CHANNEL, STRUCTURAL
Solicitation # SPE8E4-26-T-1959
This contract, issued under solicitation SPE8E4-26-T-1959, is a Total Small Business Set-Aside for CHANNEL, STRUCTURAL material identified by NSN 9520-01-230-2541 and part number B906 20 GR, with a quantity of 2,110 linear feet. The delivery requirement is 167 days from the award date, with FOB origin terms and a permitted quantity variance of plus or minus 10 percent. Inspection and acceptance both occur at the destination, and packaging must comply with MIL-STD-2073-1E, including specific preservation methods, unit and intermediate container codes, and marking per MIL-STD-129 with no special marking required. Palletization must adhere to DLA’s packaging requirements, and the material is to be shipped to the designated transportation officer at DLA Distribution Albany in Georgia, with the freight shipping address clearly specified. The contract incorporates all applicable technical and quality requirements from the DLA Master List of Technical and Quality Requirements, referenced by R and I numbers, with the controlling revision determined by the acquisition type and solicitation amendment dates. The unit of issue is feet, and the contract includes specific instructions for transportation procedures outlined in DLAD Proc Notes C19 and C20. The original required delivery date is March 2, 2027, with a need ship date of February 1, 2027, and the solicitation closed on August 17, 2026, under NAICS code 331221 for metal fabricated products.
ALBANY TRANSPORTATION OFFICER

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331221
New
DIBBS
SHEET, METAL
Solicitation # SPE8E9-26-T-3302
This contract specifies the procurement of 8 sheets of cold finished 301 stainless steel, 0.071 inch thick, 36 inches wide, and 96 inches long, with a minimum tensile strength of 125 ksi and minimum yield strength of 75 ksi, conforming to SAE AMS5517N and ASTM A700-14 standards. All material must be supplied in whole-foot lengths only and strictly adhere to dimensional tolerances without the use of test coupons. A Certificate of Quality Compliance (CoQC) and Metal Certification are mandatory for every shipment and must accompany each delivery to the DLA depot and be forwarded to the contracting officer. Each sheet requires continuous identification markings including the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and exact dimensions, applied via stamping or stenciling using waterproof, non-contaminating ink legible to the unaided eye. Adhesive labels are required for smaller bars and tubes under 0.250 inch nominal OD. Suppliers must be listed on the Qualified Suppliers List for Distributors (QSLD) to be eligible for award; any deviation or use of non-QSLD-sourced product constitutes an unauthorized substitution with potential criminal and civil penalties. Packaging must comply with MIL-STD-2073-1E and RP001, including robust four-corner and edge protection, full top/bottom fiberboard coverage, and special packaging code ZZ per ASTM A700. Marking must conform to MIL-STD-129R and include dual-unit quantities when applicable. Delivery is FOB origin to DLA Distribution San Diego with a required delivery date of February 1, 2027, and no quantity variance is permitted. Inspection and acceptance occur at destination, and all documentation must align with the referenced Technical Data Package and DLA procurement directives.
CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 331221
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0347
This contract specifies the procurement of 101 feet of cold drawn steel bar, type 1020, with a cross-section measuring 0.500 inches across flats, delivered in whole-foot lengths between 8 and 12 feet, at a nominal weight of 0.850 pounds per foot. The material must fully comply with ASTM A108, ASTM A29/A29M-20, and ASTM A700-14 standards, and must be accompanied by a Certificate of Quality Compliance (mill certification) with every shipment, copies of which must be submitted to the DLA Troop Support Contracting Officer. Continuous marking is mandatory on each unit, including the DLA contract delivery order number, NSN, specification revision, alloy grade, manufacturer’s name, heat and lot number, and dimensions, using only stamping or stenciling methods that are legible, permanent, waterproof, and non-contaminating; adhesive labels are required for bars under 0.250 inches in nominal OD, and tags are acceptable for wire. Packaging must strictly follow MIL-STD-2073-1E and MIL-STD-129R, with special preservation codes Z and ZZ as defined by ASTM A700, and palletization must adhere to DLA packaging requirements. The items are subject to destination inspection and acceptance with no variance allowed in quantity, under a firm fixed price term, and must be delivered within 30 days after award. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96; failure to comply renders bids non-compliant and may result in rejection or criminal penalties. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, and the Certificate of Quality Compliance requirement is defined under CDRL-METALSCERT. Delivery is to the DLA Distribution DDSP New Cumberland Facility in Pennsylvania, with shipping and marking instructions detailed in applicable military and industry standards.
DDSP NEW CUMBERLAND FACILITY

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 331221
New
DIBBS
PLATE, METAL
Solicitation # SPE8E4-26-T-1940
The contract specifies the procurement of a single carbon steel structural plate, hot rolled and as fabricated, measuring 0.50 inches thick, 26.00 inches wide, and 336.00 inches long, weighing approximately 1237.6 pounds per unit. The material must comply with ASTM A36/A36M-19 revision and other referenced standards including MIL-STD-129R, SAE AMS2807C, and ASTM A6/A6M-24B, ensuring adherence to technical and quality specifications. The plate must be supplied in whole-foot lengths only and require continuous identification markings on each unit, including the DLA contract delivery order number, NSN, specification revision, grade, manufacturer’s name, heat and lot number, and dimensions. Markings must be applied via stamping or stenciling with waterproof, legible, and durable ink that does not contaminate the material, and adhesive labels are permitted for smaller items. A Certificate of Quality Compliance, or mill-certification, must accompany each shipment and be forwarded to the DLA Troop Support Contracting Officer. The supplier must be listed on the Qualified Suppliers List for Distributors (QSLD) as mandated by DLA Troop Support, and any deviation from this requirement must be explicitly declared. If the supplier is on the QSLD, government inspection requirements are waived, and quality conformance is based on the supplier’s internal certification. Packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, with preservation and marking following ASTM A700, and all items must be palletized, blocked, and braced to prevent physical damage during transit. Shipment is to be delivered FOB destination within 20 days to the specified address in Osan Air Base, South Korea, with no tolerance for quantity variance. The delivery is for a single unit under NSN 9515-00-222-5056, with contract data and delivery details tied to solicitation SPE8E4-26-T-1940, and all technical data requirements are accessible through the DLA Master List of Technical and Quality Requirements.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 12 days
View Details
NAICS: 331221
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0348
The contract specifies the procurement of steel bars composed of SAE 8630 alloy, supplied in hot-rolled, annealed condition with a diameter of 0.438 inches and lengths between 8 and 12 feet in whole-foot increments only, weighing 0.511 pounds per foot. All material must meet rigorous technical and quality standards referenced through DLA’s Master List of Technical and Quality Requirements, with mandatory compliance to CDRL-METALSCERT for metal certification and a Certificate of Quality Compliance included with every shipment. Each unit must be clearly marked with the DLA contract number, NSN, specification revision, alloy, manufacturer details including heat and lot numbers, and dimensions using approved methods such as stamping or stenciling—ensuring legibility, permanence, and non-contamination. Adhesive labels are required for bars under 0.250 inches in nominal diameter, while wire tags are acceptable for wire forms. Packaging adheres to MIL-STD-2073-1E and ASTM A700, with special markings Z and ZZ permitted for preservation and labeling under MIL-STD-129, and bulk shipments must indicate both units when applicable. Delivery is FOB origin with a 30-day ADO window, inspected and accepted at destination under firm fixed pricing with zero variance allowed. Only suppliers listed on the Qualified Suppliers List for Distributors (QSLD) are eligible for award, and any deviation must be explicitly declared; non-compliant submissions are considered unauthorized substitutions subject to criminal and civil penalties. The government waives source inspection requirements for qualified QSLD suppliers, relying instead on the manufacturer’s certification. Packaging and marking must align with RP001 and IP083, with freight addressed to Fort Hood, Texas, delivered via traceable means excluding parcel post. The material is governed by SAE AMS6280N and AMS2806 standards, and all documentation including the Technical Data Package and DLA’s procurement notes M03 and the QSL program guidelines must be referenced for full compliance. The sole ordered quantity is one foot, but the contract structure implies scalability under the same terms, with the procurement assigned to DLA Troop Support and managed under federal acquisition protocols.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 331221
New
DIBBS
BAR, METAL
Solicitation # SPE8E4-26-Q-0346
The contract pertains to the procurement of four metal bars identified by part number 9530-01-691-7904 under solicitation SPE8E4-26-Q-0346 issued by the Defense Logistics Agency. Delivery is required within 30 days after award, and the solicitation was posted on August 4, 2026, with responses due by August 18, 2026. Technical and quality requirements referenced in the contract are governed by the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on the acquisition scale. The item is subject to stringent export control regulations under ITAR or EAR, prohibiting unauthorized disclosure of technical data to foreign persons anywhere in the world, including to foreign nationals employed by U.S. companies. Access to this controlled data is restricted to contractors with valid US/Canada Joint Certification Program certification, completed DOD export control training, and explicit approval from DLA. Additional requirements include compliance with DLA packaging standards, removal of government identification from non-accepted supplies, and adherence to Covered Defense Information protocols. The contractor must also hold CMMC Level 2 certification issued by a certified third-party assessment organization. The point of contact for inquiries is Leslie Morales-Zera, reachable via email or phone at the provided DLA contact details.
Defense Logistics Agency

POSTED

1 day ago

DEADLINE

in 13 days
View Details
NAICS: 331221
New
DIBBS
Supplier of Domestic Raw Materials (Steel, Alloy Wire)The contract seeks a supplier to provide U.S.-melted and U.S.-cast spring-grade steel or alloy wire with full traceability and certification compliant with both the Berry Amendment and the Buy American Act, ensuring all materials originate entirely within the United States. The product must meet stringent domestic content requirements to support defense-related applications, with documentation verifying the origin of raw materials through every stage of production. The procurement is structured as a subcontract under a Total Small Business Set-Aside, meaning only small businesses are eligible to respond, aligning with SBA regulations and the NAICS code 331221 for steel product manufacturing. Performance of the contract is required to occur in Phoenix, Arizona, with a response deadline of August 14, 2026, and the solicitation was posted on August 3, 2026. The contracting activity falls under the Department of Defense’s Fluid Handling Division, indicating the wire will support critical defense systems requiring high-performance, domestically sourced materials. Full compliance with federal acquisition regulations regarding origin, certification, and small business eligibility is mandatory, and interested vendors must submit proposals through the official DIBBS portal prior to the deadline to be considered.
FLUID HANDLING DIVISION

POSTED

2 days ago

DEADLINE

in 9 days
View Details
NAICS: 331221
New
DIBBS
Supply of High-Carbon Steel Wire for Spring ManufacturingThe contract seeks the supply of precision high-carbon or alloy steel wire optimized for manufacturing military-grade torsion springs, requiring strict adherence to tensile strength specifications and tight dimensional tolerances essential for reliable spring coiling under operational stress. The material must consistently meet or exceed military performance standards, ensuring durability and functionality in critical defense applications. Only small businesses are eligible to respond, as this is a total small business set-aside under SBA guidelines, reinforcing support for small business participation in defense supply chains. The solicitation, issued under NAICS code 331221 by the Strategic Acquisition Program Directorate within the Department of Defense, was posted on August 3, 2026, with responses due no later than August 18, 2026. It is structured as a subcontract opportunity and does not specify a place of performance or point of contact, indicating flexibility in production location while emphasizing compliance with technical requirements. All interested parties must submit proposals through the official DIBBS platform before the deadline to be considered for award.
STRATEGIC ACQ PROGRAM DIRECTORATE

POSTED

2 days ago

DEADLINE

in 13 days
View Details

More opportunities from Department Of Defense → DDSP NEW CUMBERLAND FACILITY

Same awarding agency

NAICS: 332216
New
DIBBS
HEATING UNIT, INFRAR
Solicitation # SPE8E5-26-T-3844
The contract is for the procurement of four heating units, infrared type, under NSN 3439-01-436-9799, with a delivery requirement of 167 days after date of award. The solicitation number is SPE8E5-26-T-3844, issued on August 5, 2026, with responses due by August 17, 2026, and is set aside exclusively for small businesses under the SBA Total Small Business Set-Aside provision. The procurement is managed by the Department of Defense through the DDSP New Cumberland Facility, with performance specified at New Cumberland, Pennsylvania, zip code 17070-5002. The technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements, referenced by R or I numbers, with the applicable revision determined by the solicitation or award date depending on acquisition size. Packaging must comply with DLA packaging standards, and government identification must be removed from any non-accepted items. Only products explicitly named and identified by part number in the purchase order are considered acceptable, with no alternative substitutes permitted. The item has no shelf life limitation. Primary point of contact is Ira Hedgepeth, reachable via email and phone provided in the contract data.
Saw Blade and Handtool Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333413
New
DIBBS
FILTER, AIR, ELECTROS
Solicitation # SPE8E8-26-T-5042
The contract is for the procurement of 29 units of AIR FILTER, ELECTROS with NSN 4460-01-692-2652 under solicitation SPE8E8-26-T-5042, issued as a total small business set-aside under NAICS code 333413. Delivery is required within 167 days of award, with shipments to be furnished FOB origin and inspected and accepted at destination, with no variance allowed in quantity. Packaging must comply with MIL-STD-2073-1E and MIL-STD-129, including specific preservation, wrapping, and marking requirements, with no special marking codes applied, and palletization must follow DLA packaging standards. The supplies are to be delivered to the DLA Distribution facility at New Cumberland, Pennsylvania, with a required ship date of February 1, 2027, and the original delivery deadline was October 28, 2026. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, and the revision in effect on the solicitation issue date or award date controls depending on acquisition size. The contract incorporates provisions for potential coverage of covered defense information and requires adherence to DLA transportation and freight procedures. The point of contact for this procurement is Alexis Selby of the Department of Defense.
Industrial and Commercial Fan and Blower and Air Purification Equipment Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
GAGE, PROFILE
Solicitation # SPE8E5-26-T-3780
The contract pertains to the procurement of 12 GAGE, PROFILE units under solicitation SPE8E5-26-T-3780, with a response deadline of August 17, 2026, and a delivery requirement within 167 days after order. The item is identified by NSN 5220-00-446-8307 and is subject to strict technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation or award date depending on acquisition size. Item Unique Identification (IUID) compliance is mandatory in accordance with MIL-STD-130 and the DFARS 252.211-7003 clause. The contractor must be Cybersecurity Maturity Model Certification (CMMC) Level 2 certified through a qualified third-party assessment organization. Technical data associated with this item is subject to export controls under either ITAR or EAR, restricting disclosure to foreign persons regardless of location, and requires prior government authorization. Access to this controlled data is limited to contractors with approved US/Canada Joint Certification Program status, completion of DOD export control training, and approval from the DLA controlling authority. The contracting office is the DLA New Cumberland Facility, with primary point of contact Khue Nguyen, and the place of performance is listed as New Cumberland, PA, 17070-5002. There is no shelf life requirement for this item.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 323117
New
DIBBS
MARKER, IDENTIFICATION
Solicitation # SPE8E6-26-T-4066
This contract pertains to the procurement of a Marker, Identification with NSN 7690-01-290-0175 and part number TKG0896-1, supplied by FRUEHAUF CORP, and is governed by stringent DLA packaging and quality requirements. The item is classified as a critical application item with a non-extendable Type I shelf life of 24 months, and all packaging must comply with MIL-STD-2073-1E and MIL-STD-129 for marking, including the special marking code 32 for shelf-life identification. Packaging and palletization must adhere to DLA’s official procurement standards, and the item must be delivered FOB origin with no quantity variance allowed. Delivery is required within 36 days to the DLA Distribution facility in New Cumberland, Pennsylvania, with inspection and acceptance occurring at the destination. The unit of issue is PG, with a total quantity of 21 units, and the contract references technical and quality requirements from the DLA Master List, applicable as of the solicitation issue date. Transportation instructions are governed by DLAD Proc Notes C19 and C20, and the contract is issued under solicitation SPE8E6-26-T-4066 with a response deadline of August 17, 2026, and an original required delivery date of August 5, 2026.
Books Printing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333414
New
DIBBS
IMPELLER, FAN, AXIAL
Solicitation # SPE8E7-26-T-3511
The item sought is an axial fan impeller, identified by NSN 4140-01-561-8011, with a quantity of 21 units, required as a component of an Uninterruptible Power Supply within the Vestdavit RIB Davit System on LCS-1 vessels. Though the UPS is manufactured by GE INV, procurement must use Vestdavit’s part number 12271 through their government distributor, Scan Pacific Northwest LLC, with CAGE code 3ESE0. The solicitation, issued under contract number SPE8E7-26-T-3511, is governed by DLA packaging and technical quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with the applicable revision determined by the solicitation issuance date. All supplies must comply with the requirement to remove government identification from non-accepted items. Delivery is due in 167 days after award, and the place of performance is New Cumberland, Pennsylvania, with a ZIP code of 17070-5002. The solicitation was posted on August 5, 2026, and responses are due by August 17, 2026. The NAICS code 333414 applies, and the contracting office is the DLA New Cumberland Facility under the Department of Defense, with Kelly Mitchell listed as the primary point of contact.
Heating Equipment (except Warm Air Furnaces) Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 321114
New
DIBBS
CORROSION PREVENTIVE C
Solicitation # SPE8ES-26-T-2509
This contract solicits a corrosion preventive compound identified by NSN 8030-01-722-1433 and part number ETCPRTU-2B3C from Chemeon Surface Technology, LLC, with a quantity of 5 containers delivered FOB destination under solicitation SPE8ES-26-T-2509. The item is classified as a Type 2 (Code 6) shelf life item with a 24-month extendable shelf life, subject to specific packaging and marking requirements outlined in MIL-STD-2073-1E and MIL-STD-129, including the Special Marking Code 33 for Type II shelf life. Packaging must comply with DLA procurement standards and the Hazardous Materials Packaging, Marking, and Shipping requirements, with all hazardous material documentation—including Safety Data Sheets and labeled containers—aligned with OSHA’s revised Hazard Communication Standard (29 C.F.R. 1910.1200) effective June 1, 2015. Suppliers must submit SDS and compliant labels for approval prior to award and ensure employee training on the new standards. The item must be delivered within 173 days of contract award, with a required delivery date of October 15, 2026, and a need ship date of February 1, 2027. Delivery is to the DLA Distribution facility at New Cumberland, Pennsylvania, with a strict zero variance in quantity and inspection and acceptance occurring at the destination. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List, and the applicable revision depends on the solicitation or award date. All units of issue follow DoD authorized standards as aligned with ANSI X12.
Wood Preservation

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 339113
New
DIBBS
CASE, STORAGE AND TR
Solicitation # SPE8E6-26-T-4056
The contract pertains to the procurement of 35 units of a specific item identified by NSN 4240-01-654-9843 and part number 940210, with a unit price of $35.00, totaling $1,225.00. Delivery is required within 15 days of the contract award, FOB origin, with no variance allowed in quantity. Packaging must strictly comply with MIL-STD-2073-1E, including specific preservation methods, materials, and unit containerization per DLA’s requirements. Marking must adhere to MIL-STD-129 with no special marking codes applied, and palletization must follow DLA’s packaging standards. The product must be shipped to the designated DLA Distribution facility in New Cumberland, Pennsylvania, with transportation governed by DLA procedural notes C19 and C20. The item is subject to Defense Logistics Agency packaging requirements and technical standards referenced in the DLA Master List of Technical and Quality Requirements. The contract incorporates cybersecurity requirements mandating a CMMC Level 2 self-assessment and applies to covered defense information. The solicitation number SPE8E6-26-T-4056 was issued with a response deadline of August 17, 2026, and an original delivery target of September 19, 2026. The need ship date is set for August 5, 2026, indicating the timing for readiness. Performance occurs at the DLA New Cumberland facility, and all technical and quality standards referenced are controlled by the DLA Master List revision in effect on the RFP issue date. Inspection and acceptance occur at the destination point, and the contractor must be prepared to remove any government identification from non-accepted supplies. The ordering activity is the Department of Defense, with primary point of contact John Lieb at DLA, and the North American Industry Classification System code is 339113.
Surgical Appliance and Supplies Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325520
New
DIBBS
ADHESIVE
Solicitation # SPE8ES-26-T-2502
The contract specifies the procurement of 3 cases of 50-milliliter adhesive units, part number DP-460 from 3M Company, identified by NSN 8040-01-642-2514, with each case containing twelve units. The product is amber and off-white in color and must comply with a non-extendable 24-month shelf life requirement for a Type I (Code M) item. Packaging must adhere to MIL-STD-2073-1E and MIL-STD-129 for marking, with special labeling indicating Type I shelf life, and palletization must follow DLA packaging standards. Delivery is FOB destination, with a required delivery date of January 25, 2027, and a lead time of 173 days, subject to zero variance in quantity. The adhesive is classified as a hazardous material, requiring full compliance with OSHA’s revised Hazard Communication Standard, including submission of Safety Data Sheets (SDS) and approved HCS or CPSA/FHSA-compliant labels prior to award, along with employee training on the new requirements. Storage must be maintained between 60-80°F (15-27°C) to preserve shelf life. Technical and quality requirements are governed by the DLA Master List, and the contract incorporates provisions for handling covered defense information. All deliveries must be sent to the DLA Distribution facility in New Cumberland, Pennsylvania, and shipping logistics must follow DLAD procedural notes C19 and C20.
Adhesive Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details
NAICS: 336611
New
DIBBS
RAMP ASSY CORNER RH
Solicitation # SPE8E5-26-T-3818
This contract covers the procurement of 16 units of RAMP ASSY CORNER RH, identified by NSN 5440-01-553-0684 and part number 7017757152, under solicitation SPE8E5-26-T-3818. The item must be manufactured and delivered in strict compliance with technical specifications referenced from the DLA Master List of Technical and Quality Requirements, including welding and liquid penetrant nondestructive inspection standards per AWS D1.2. A certificate of conformance is required unless waived by a quality assurance letter of instruction, and all components must adhere to dimensional and assembly directives, particularly the prohibition against welding the strut base P12 to the gusset plate P18 as shown on the drawing; instead, P12 must be packaged separately with an instruction sheet included in each ramp assembly. The product must be packaged per ASTM D3951 and labeled in accordance with MIL-STD-129, with palletization following DLA packaging requirements, and all packaging marked with the specified unit of issue and quantity per unit pack. Mercury and mercury-containing compounds are strictly prohibited unless exceptions apply for batteries, instruments, or weapon systems, and must meet secondary containment and shock-proof standards per NAVSEA 5100-003D. The contract mandates full compliance with federal safety regulations, including the submission of Safety Data Sheets and Hazard Communication Standard labels updated to the Globally Harmonized System, effective June 1, 2015, with supplier employee training required on these changes. Delivery is FOB origin with inspection and acceptance occurring at destination, and must be completed within 167 days of contract award, with a required ship date of February 1, 2027, and original delivery deadline of October 24, 2027. No quantity variance is permitted, and all items must be shipped to the DDSP New Cumberland Facility in Pennsylvania. The solicitation is a total small business set-aside under NAICS code 336611, with drawings available via DIBBS during the open solicitation period. The contract incorporates FAR clauses for inspection, conformance, and standard requirements, and all documentation, including technical data packages and revisions referenced, must align with the specified drawing revisions and dated configurations.
Ship Building and Repairing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 333515
New
DIBBS
LIGHT, COCKPIT, AIRCRAFT
Solicitation # SPE8E7-26-T-3487
This contract pertains to the procurement of aircraft cockpit lighting components under solicitation SPE8E7-26-T-3487, issued by the Department of Defense through the DDSP New Cumberland Facility. The item, identified by NSN 6220-01-563-8636 and part number 937-000-10M, is supplied by Luminator Holding L.P and Leonardo Spa Helicopters Division, with a total quantity of 13 units at a unit price of $13.00, resulting in a total contract value of $169.00. Delivery is required within 153 days from the contract date, with FOB origin terms, and inspection and acceptance occur at the destination. Packaging must comply with DLA Master List of Technical and Quality Requirements, particularly RP001 for packaging standards, MIL-STD-129 for marking and labeling, and either TQ requirement IP025 for hazardous materials per FED-STD-313 or ASTM D3951 for non-hazardous commercial packaging, with the DLA standards overriding ASTM where applicable. All packaging must reflect the specified Unit of Issue and Quantity per Unit Pack, and palletization must adhere strictly to DLA guidelines. The contract is a total small business set-aside under NAICS code 333515, with a response deadline of August 17, 2026, and was posted on August 5, 2026. The delivery destination is the DLA Distribution facility at 2083 Normandy Drive, New Cumberland, PA 17070-5002, with a required ship date of January 18, 2027, and an original delivery deadline of February 27, 2027. No quantity variance is permitted. Transportation instructions are governed by DLAD Proc Note C19 for general shipment and C20 for first destination handling. Documentation for source approval and handling of covered defense information is required as stipulated by RC001 and RD003. All technical and quality requirements referenced via R or I numbers in the DLA Master List take precedence over any other standards. The primary point of contact for the contract is Kelly Mitchell, reachable via email and phone provided.
Cutting Tool and Machine Tool Accessory Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 327999
New
DIBBS
SHEETING, REFLECTIVE
Solicitation # SPE8E5-26-T-3781
Reflective sheeting meeting specification 3M ScotchLite 3271, 24 inches nominal width by 50 yards nominal length, is procured under contract SPE8E5-26-T-3781 with NSN 9390-00-501-5145 and part number 7000030797. The contract requires 14 rolls, each defined as one RO equal to 50 yards, with no variance allowed in quantity. Delivery is FOB origin and must be completed within 167 days of award, with the original required delivery date set for June 11, 2027, and a need ship date of February 1, 2027. All technical and quality requirements are governed by the DLA Master List of Technical and Quality Requirements referenced by R- and I-numbers, which supersede industry standards such as ASTM D3951. Packaging must comply with DLA Packaging Requirements RP001 and MIL-STD-129 for marking and labeling, with hazardous material handled per Fed-Std-313 and TQ requirement IP025 if applicable, otherwise commercially packaged in accordance with ASTM D3951. Palletization must align with RP001, and all packaging must be labeled consistent with the specified Unit of Issue and Quantity per Unit Pack. Inspection and acceptance occur at destination. The delivery address is the DLA Distribution facility at New Cumberland, Pennsylvania, and transportation protocols are governed by DLAD Proc Notes C19 and C20. The solicitation was issued on August 5, 2026, with a response deadline of August 17, 2026, under the NAICS code 327999, and is managed by the Department of Defense through the DDSP New Cumberland Facility.
All Other Miscellaneous Nonmetallic Mineral Product Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 12 days
View Details
NAICS: 325510
New
DIBBS
SPECTRAL SELECTIVE COA
Solicitation # SPE8ES-26-T-2504
The contract calls for the delivery of Spectral Selective Coating in polyurethane form, specifically identified by NSN 8010-01-681-7475, with a total quantity of 16 boxes, each containing eight one-pint units. The coating must be dark gray, matching color chip number 36170, and packaged in accordance with DLA packaging requirements. Each unit package must include a MIL-STD-129 label featuring the lot or batch number. The product is subject to stringent technical and quality requirements referenced from the DLA Master List of Technical and Quality Requirements, with applicable revisions controlled by the solicitation issue date. Hazardous material provisions require submission of Safety Data Sheets compliant with 29 C.F.R. 1910.1200, as mandated by OSHA’s revised Hazard Communication Standard effective June 1, 2015, along with corresponding labels aligned with either the HCS or the Consumer Product Safety Act and Federal Hazardous Substance Act. Suppliers must also certify that employees have been trained on the new SDS formats, labeling standards, and regulatory requirements. Physical identification of the bare item must comply with RQ017, and all government identification must be removed from non-accepted supplies per RQ011. Delivery is due within 34 days after contract award, with the solicitation issued on August 5, 2026, and responses due by August 11, 2026. The contract is administered by the Department of Defense through the DDSP New Cumberland Facility, with point of contact Stephen Ockenhouse.
Paint and Coating Manufacturing

POSTED

about 2 hours ago

DEADLINE

in 6 days
View Details