This Solicitation opportunity from Department Of Defense was posted on July 21, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PLATE, METAL

Closed

SPE8E4-26-Q-0323Federal

Submission Closed07/27/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 332313

New

DIBBS

Supply of Metal Plates (NSN 9535002428613)

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Closure Protective Covers (CPCs)

Solicitation # N6660426Q0288

The Naval Undersea Warfare Center Division, Newport (NUWCDIVNPT) is soliciting bids for the procurement of Closure Protective Covers (CPCs) under solicitation N66604-26-Q-0288. This is a Firm Fixed Price contract with a maximum funding limitation of $197,000.00. While originally a small business set-aside, Amendment 0002 changed the status to full and open competition. The requirement is divided into three CLINs: a first article unit, production units, and the delivery of data per the Contract Data Requirements List. Award will be made on a Lowest Price Technically Acceptable (LPTA) basis to the vendor proposing the greatest quantity of production units within the $197,000.00 budget. To be considered technically acceptable, offerors must provide completed pricing tables and demonstrate cybersecurity compliance, including an active CMMC Level 2 (Self) or higher assessment and a NIST SP 800-171 DoD Assessment score posted in the Supplier Performance Risk System (SPRS). Access to export-controlled government drawings requires a valid Joint Certification Program (JCP) certification. Deliverables must be manufactured in accordance with drawing JCM-14865-001 and include a comprehensive Certificate of Compliance (CoC) documenting material validations and test results for all components. Shipping is FOB Destination to Newport, RI, and the government's preferred payment method is via Government Purchase Card.

Nuwc Division Newport

POSTED

DEADLINE

Solicitation # SPE8E9-26-T-3771

Solicitation SPE8E9-26-T-3771 is a fixed-price request for quotations issued by DLA Troop Support, Construction and Equipment MRO SVC I, for the procurement of 40 metal plates under NSN 9535002428613. This is a total small business set-aside under NAICS 332313, with quotes due electronically via the DIBBS portal by September 21, 2026. The procurement requires the submission of metal certification CDRLs and DD Form 1423s. Delivery is specified as FOB Destination, with a need ship date of March 27, 2026, and a final required delivery date of November 30, 2026, to the DLA Distribution New Cumberland facility in Pennsylvania. Award eligibility is restricted to suppliers listed on the Qualified Suppliers List for Distributors (QSLD), and offers utilizing additive manufacturing are ineligible. Inspection and acceptance will occur at the destination, though source inspection is waived for approved QSLM/QSDL suppliers. Packaging and marking must adhere to RP001, MIL-STD-2073-1E, and MIL-STD-129, with strict requirements for waterproof, legible markings to avoid product rejection. The contract incorporates various FAR and DFARS clauses, including the Buy American Act, Berry Amendment, and DFARS 252.204-7012 for safeguarding covered defense information. Invoicing and payment must be processed through the Wide Area WorkFlow (WAWF) system.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Hardware Cover (NSN 1285-01-214-8090)

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

Galvanized Pressure Tank Supplier

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Solicitation # SPE8ED-26-T-1390

Solicitation SPE8ED-26-T-1390 is a fixed-price request for quotations issued by DLA Troop Support for the procurement of one galvanized pressure tank, identified by NSN 5430-01-614-6086 and part number Z-21 from State Industries Inc. The required tank must have a 21-gallon capacity, a maximum working pressure of 75 PSIG, an overall length of 27.0 inches, and an overall diameter of 16.0 inches, featuring one flat end and one convex end with 1 1/4 inch NPT right-hand threading. A critical material restriction prohibits the intentional addition of or direct contact with mercury or mercury-containing compounds. The delivery is scheduled for September 3, 2026, with a required delivery window of 20 days after order. Shipment is designated for the Assault Craft Unit ACU 2 in Virginia Beach, Virginia, with FOB Origin terms. Quality assurance requires sampling in accordance with MIL-STD-1916 or ASQ H1331, and inspection and acceptance will occur at the destination. Packaging must comply with RP001 and MIL-STD-129, and all payment requests must be processed through the Wide Area WorkFlow system. The procurement is subject to various federal regulations, including the Buy American and Balance of Payments Program, the Berry Amendment, and DFARS requirements for safeguarding covered defense information.

CONSTRUCTION & EQUIPMENT CONTAINERS

POSTED

DEADLINE

Solicitation # SPE7M1-26-T-334X

This solicitation, numbered SPE7M1-26-T-334X, is issued by the Department of Defense Maritime Supply Chain for the procurement of nine units of NSN 1285-01-214-8090. The contract is a total small business set-aside under NAICS code 332313. Delivery is required within 168 days after order, with a need ship date of March 9, 2027, and a final required delivery date of October 11, 2027. Shipping is FOB Origin and destined for the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to DLA packaging and marking requirements, specifically MIL-STD-2073-1E and MIL-STD-129. Quality assurance is governed by MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. Notably, the use of Class I ozone-depleting substances is prohibited without written approval, and the intentional addition of mercury or mercury-containing compounds is forbidden except for specific functional exceptions. All provided items must meet the cited technical data and part number requirements.

MARITIME SUPPLY CHAIN

POSTED

DEADLINE

CAP, PROTECTIVE, DUST AN

Solicitation # SPE7M4-26-T-387G

This contract is a solicitation for the procurement of 11,231 protective caps designed as dust and moisture seals, identified by NSN 5340-01-434-2378. The items are classified as commercial products and critical application items, requiring adherence to technical standards NASM5501/31 and NAS847. The procurement is conducted under full and open competition with a required delivery date of May 16, 2027, and a delivery window of 221 days. The agreement mandates strict quality control and sampling protocols following MIL-STD-1916 or ASQ H1331, with a zero-tolerance policy for non-conformances in certain sampling plans. It explicitly prohibits the intentional addition of mercury or mercury-containing compounds. Packaging, marking, and shipping must comply with MIL-STD-129 and MIL-STD-2073-1E, with final delivery and inspection occurring at the DLA Distribution Depot in Tinker AFB, Oklahoma.

FLUID HANDLING DIVISION

POSTED

DEADLINE

COVER, ELECTRICAL CONNE

Solicitation # SPE7M5-26-T-477N

Solicitation SPE7M5-26-T-477N is a fixed-price request for quotation issued by the DLA Land and Maritime Active Devices Division for the procurement of 69 electrical connector covers, identified by NSN 5935-00-843-5816. The requirement specifies adherence to detailed drawing 18876 9176098 Revision N and reference drawing 81348 9176098-1. Delivery is required within 138 days, with a need ship date of February 7, 2027, and an original required delivery date of February 10, 2027. The items are to be delivered FOB Origin to DLA Distribution San Joaquin in Tracy, California, with both inspection and acceptance occurring at the destination. The contract mandates strict compliance with DLA packaging and marking standards, including RP001 for palletization and MIL-STD-129 for labeling. Non-hazardous materials must follow ASTM D3951, while hazardous materials must comply with TQ requirement IP025 and the Hazard Communication Standard. Technical and quality requirements are governed by the DLA Master List, and the use of Class I ozone-depleting substances is prohibited without written approval. Administrative requirements include the use of the Wide Area WorkFlow system for invoicing and adherence to cybersecurity standards under DFARS 252.204-7012. Additionally, the solicitation incorporates the Buy American Act and Berry Amendment for domestic sourcing and provides a price evaluation preference for certified HUBZone small business concerns.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

CAP-PLUG, PROTECTIVE, DU

Solicitation # SPE7L1-26-T-08Z0

This contract, identified by solicitation number SPE7L1-26-T-08Z0, is for the procurement of 625 protective dust and moisture seal cap-plugs. The items are identified by NSN 5340-01-248-2106 and part number EC-44 from Caplugs LLC, adhering to technical drawing 22380 2307226 Revision A. This is designated as a critical application item. The procurement is managed by the Department of Defense Land Supply Chain under NAICS code 332313. Delivery is required within 168 days after order, with an original required delivery date of January 3, 2027, and a need ship date of March 9, 2027. Shipping is FOB Origin and the destination for inspection and acceptance is the DLA Distribution Depot Oklahoma at Tinker AFB. Packaging must comply with RP001 DLA requirements and MIL-STD-129, with specific instructions to use ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. The contract incorporates the DLA Master List of Technical and Quality Requirements, specifically referencing RP001 and RA001.

POSTED

DEADLINE

COVER, ELECTRICAL CONNE

Solicitation # SPE7M5-26-T-483L

This contract, identified as solicitation SPE7M5-26-T-483L, is issued by the Department of Defense Active Devices Division for the procurement of 21 electrical connector covers under NSN 5935-01-413-8115. The items are associated with Amphenol Corp part number 10-553-310-139 and Thales SA part number 91652615. The procurement falls under NAICS code 332313 and requires delivery to DLA Distribution Red River in Texarkana, Texas, with a required delivery date of April 24, 2027, and a need ship date of March 9, 2027. The agreement specifies a delivery timeframe of 168 days after the order is placed, with shipping terms set as FOB Origin and inspection and acceptance occurring at the destination. Packaging must adhere to RP001 DLA requirements and MIL-STD-129 for marking and labeling, with specific instructions to use ASTM D3951 for non-hazardous materials or TQ requirement IP025 for hazardous materials. The contract also incorporates various technical and quality requirements from the DLA Master List, including RP001, RA001, RQ011, and RQ017, and mandates compliance with the Buy American and Balance of Payments programs.

ACTIVE DEVICES DIVISION

POSTED

DEADLINE

Solicitation # SPE7L0-26-Q-0318

This solicitation, issued by the Department of Defense Land Supply Chain ESOC Buys on September 10, 2026, is for the procurement of one mounting plate under National Stock Number 2510-01-608-3187. The contract requires delivery within 60 days after receipt of order, with a response deadline for quotations set for September 17, 2026. Jeffrey Bloom serves as the primary point of contact for this requirement. A critical component of this contract is the strict adherence to export control regulations. The technical data associated with this item is subject to the International Traffic in Arms Regulations or the Export Administration Regulations, meaning it cannot be exported or disclosed to foreign persons without prior authorization from the Department of State or Department of Commerce. Consequently, the Defense Logistics Agency limits the distribution of this data to contractors who possess an approved US/Canada Joint Certification Program certification and have completed the required training and questionnaires.

LAND SUPPLY CHAIN ESOC BUYS

POSTED

1 day ago

DEADLINE

in 6 days

AI Contract Overview

This contract specifies the procurement of two pieces of structural steel plate measuring 0.250 inches thick, 96 inches wide, and 29 feet long, each weighing approximately 2368.6 pounds, manufactured to MIL-S-22698 with normalized or controlled rolling heat treatment and sheared edges. The material must be certified compliant with American Bureau of Shipping (ABS) rules for steel vessels, and no substitutions are permitted. Every unit must bear permanent, legible markings including the DLA contract number, NSN, specification revision, grade, manufacturer’s name, heat and lot number, and exact dimensions, applied via stamping or stenciling with waterproof, non-contaminating fluid; adhesive labels are allowed for smaller bars and tubes. Certification is mandatory: a Certificate of Quality Compliance and Metal Certification are required with each shipment, and all documents must be submitted to the DLA Troop Support Contracting Officer. The material must be produced by an approved steel mill and marked with “AB” to indicate compliance with MIL-S-22698. Suppliers must be on the Qualified Suppliers List for Distributors (QSLD) for FSGs 95 and 96; bids from non-listed suppliers are considered exceptions and may result in rejection or criminal penalties. Mercury and mercury compounds are prohibited unless explicitly exempted under NAVSEA guidelines, and all packaging must conform to MIL-STD-2073-1E and DLA packaging requirements, including preservation per ASTM A700 and marking per MIL-STD-129. The item is subject to destination inspection and acceptance, delivered FOB origin within 30 days of award, with firm fixed pricing and zero variance allowed. Cybersecurity Maturity Model Certification Level 2 self-assessment applies, and all technical data, including CDRLs, must align with the DLA Master List of Technical and Quality Requirements.

General Info

Two 0.250-inch steel plates, MIL-S-22698 compliant, ABS certified, no substitutions, marked, certified, FOB origin, QSLD required.

Agency

Department Of Defense → Defense Logistics AgencyView Agency

NAICS

332313 - Plate Work ManufacturingView NAICS

Place of Performance

USA

Set-Aside

NONE

Documents

(1)

RFQ SPE8E4-26-Q-0323 for Steel Structural Plate

PDF•rfq

AI Contract Breakdown

Uniform Contract Format

Timeline

PhaseClosed

PostedJul 21

Solicitation

Response DeadlineJul 27

Deadline has passed

Submission Closed

07/27/2026, 05:00:00 PM UTC

Find active opportunities like this

Start your free trial to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → Defense Logistics Agency

Contacts1 person available

OfficeUSA

Organization / Agency

Department Of Defense → Defense Logistics Agency

View Agency Profile

Office AddressUSA

Contacts

Denise Boyle

contact@example.gov

+1 (555) 000-0000

Full Description

PLATE, METAL STEEL, STRUCTURAL, ORDINARY STRENGTH HOT ROLLED, SHEARED EDGE HEAT TREATMENT: NORMALIZED OR CONTROLLED ROLLING 0.250 IN THK 96 IN W 29 FT LG 2368.6 LB/PM (REF)
Note: Material will not be accepted without an ABS Surveyor's endorsement on certificates.
MATERIAL MANUFACTURED TO MIL-S-22698 SHALL INCLUDE THE LETTERS "AB" WITH THE MARKING REQUIREMENTS.
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS (IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RD003, COVERED DEFENSE INFORMATION POTENTIALLY APPLIES
Metal Certification Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-METALSCERT is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
Certificate of Quality Compliance (CoQC) Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. If CDRL-COQCCDRLs is missing from DLA Technical Data Management Transformation (TDMT) they can also be viewed in the DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB AT: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. MERCURY OR MERCURY CONTAINING COMPOUNDS SHALL NOT BE INTENTIONALLY ADDED TO<(>,<)> OR COME IN DIRECT CONTACT WITH<(>,<)> ANY HARDWARE OR SUPPLIES FURNISHED UNDER THIS CONTRACT. EXCEPTION: FUNCTIONAL MERCURY USED IN BATTERIES, FLUORESCENT LIGHTS, REQUIRED INSTRUMENTS; SENSORS OR CONTROLS; WEAPON SYSTEMS; AND CHEMICAL ANALYSIS REAGENTS SPECIFIED BY NAVSEA. PORTABLE FLUORESCENT LAMPS AND PORTABLE INSTRUMENTS CONTAINING MERCURY SHALL BE SHOCK PROOF AND CONTAIN A SECOND BOUNDARY OF CONTAINMENT OF THE MERCURY OR MERCURY COMPOUND. (IAW NAVSEA 5100-003D). A Certificate of Quality Compliance (Mill-Material Certification) is required. A copy of the Certificate of Quality Compliance shall be provided with every shipment to the customer or DLA depot, and a copy of
SPE8E4-26-Q-0323
SECTION B
SUPPLY/SERVICE: 9515-00-153-3214 CONT'D
the Certificate of Quality Compliance provided for each shipment shall be forwarded to the DLA Troop Support Contracting Officer identified on the award.
CONTINUOUS IDENTIFICATION MARKINGS ARE REQUIRED IN ADDITION TO THE MARKING REQUIREMENTS CITED IN THE PROCUREMENT SPECIFICATION:
AS A MINIMUM, EACH UNIT OF ISSUE (FEET,PLATE, OR SHEET) SHALL BE IDENTIFIED WITH THE (1) DLA CONTRACT DELIVERY ORDER NUMBER, (2) NSN, (3) SPECIFICATION NUMBER AND REVISION, (4) GRADE,CLASS & TYPE, ALLOY, PART NUMBER,DIE NUMBER, AND TEMPER, (5) MANUFACTURER'S NAME, HEAT AND LOT NUMBER, (6) DIMENSIONS.
MATERIAL SHALL BE SUPPLIED WITHIN THE REQUIRED MIN-MAX LENGTH REQUIREMENTS AND MUST IN WHOLE FEET LENGTH ONLY (I.E. 10, 11, OR 12 FT EVEN)
PERMISSIBLE MARKING METHODS ARE STAMPING (EXCEPT DIE STAMP) OR STENCILING. THE CHARACTERS SHALL BE OF SUCH A SIZE AS TO BE LEGIBLE AND VISIBLE TO THE UNAIDED EYE. THE MARKING FLUID APPLIED SHALL NOT CONTAMINATE, OR OTHERWISE HAVE A DETRIMENTAL EFFECT ON THE PRODUCT OR ITS PERFORMANCE. THE MARKINGS SHALL BE WATERPROOF AND SUFFICIENTLY STABLE TO WITHSTAND NORMAL HANDLING.
IN LIEU OF "LINE MARKINGS", ADHESIVE LABELS ARE REQUIRED FOR EACH UNIT OF STRAIGHT BARS, TUBES AND SHAPES, UNDER 0.250 INCHES IN NOMINAL OD, AND TO BE SECURELY FASTENED. TAGS WILL BE ACCEPTABLE METHOD FOR WIRES.
FAILURE TO COMPLY WILL BE CAUSE FOR REJECTION OF END PRODUCT."
IY010: QUALIFIED SUPPLIERS LIST FOR DISTRIBUTORS (QSLD) REQUIREMENT (DLA TROOP SUPPORT JUNE 1994) FOR FSG'S 95 AND 96.
ONLY SUPPLIERS LISTED ON THE QSLD ARE ELIGIBLE FOR AN AWARD PURSUANT TO THIS SOLICITATION.
SUPPLIERS NOT QUOTING IN COMPLIANCE WITH THE QSLD REQUIREMENT MUST INDICATE THEY ARE DEVIATING FROM THE REQUIREMENTS OF THE SOLICITATION.
ANY BID/QUOTE/OFFER BASED ON A PRODUCT SUPPLIED BY OTHER THAN AN APPROVED QSL DISTRIBUTOR, EVEN THOUGH THE PRODUCT MIGHT HAVE BEEN MANUFACTURED IN ACCORDANCE WITH THE DRAWING(S) AND/OR SPECIFICATION(S) AS CITED IN THE PURCHASE ORDER TEXT (POT) IS A BID/QUOTE/OFFER WITH EXCEPTION AND MUST BE SO INDICATED BY THE QUOTER/OFFEROR.
ANY PRODUCT FURNISHED UNDER A CONTRACT OR ORDER FOR A PRODUCT DESIGNATED AS PART OF THE QSL PROGRAM, UNLESS SPECIFICALLY AUTHORIZED BY THE GOVERNMENT IN WRITING, MUST FULLY COMPLY WITH THE TERMS AND CONDITIONS OF THE QSL PROGRAM. ANY PRODUCT, WHICH DOES NOT FULLY COMPLY WILL BE CONSIDERED AN UNAUTHORIZED SUBSTITUTION, AND MAY YIELD CRIMINAL PENALTIES IN ADDITION TO ANY CIVIL REMEDIES AVAILABLE TO THE GOVERNMENT.
FOR THIS SOLICITATION, AND ANY RESULTING ORDER ISSUED TO AN APPROVED QSLM/QSLD SUPPLIER WHOSE QUOTE IS BASED ON COMPLIANCE WITH THE QSL PROGRAM, (EXCEPT IN THE CASE OF FMS (FOREIGN MILITARY SALE) REQUIREMENTS), REFERENCES TO SOURCE INSPECTION ARE HEREBY WAIVED. IN SUCH CASES, COQC, PVT, QAP-EQ003, ASQ H1331, AND RQ006: QUALITY CONFORMANCE INSPECTION REQUIREMENTS, IF REFERENCED, DO NOT APPLY.
FOR MORE INFORMATION ABOUT THE QSL PROGRAM GO TO THE FOLLOWING WEBSITE:
https://www.dla.mil/TroopSupport/IndustrialHardware/Engineering-and-Tech nical-services/Qualified-Suppliers-List/
-ORWRITE TO: DLA TROOP SUPPORT, ATTN: DLA TROOP SUPPORT FHTF, BLDG 3/B, 700 ROBBINS AVENUE, PHILADELPHIA, PA 19111-5092
Qualification requirements in procurement note #M03 Qualified Suppliers List for Manufacturers (QSLM)/Qualified Suppliers List for Distributors (QSLD) for Troop Support# apply. The full text of procurement note M03 can be found in the DLA Directive (DLAD) of Procurement Notes on the Web at: https://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx.
SPE8E4-26-Q-0323
SECTION B
SUPPLY/SERVICE: 9515-00-153-3214 CONT'D
(END STO) THIS MATERIAL I/A/W AMERICAN BUREAU OF SHIPPING (ABS) RULES FOR BUILDING AND CLASSING STEEL VESSELS, PART 2, SECTION 1 WITH THE SUPPLEMENTARY REQUIREMENTS IN APPENDIX 2/D. NO SUBSTITUTE MATERIAL WILL BE ALLOWED. STEEL IS TO BE PRODUCED BY AN APPROVED STEEL MILL. THE LATEST ABS EDITION AND ANY ADDITIONAL REQUIREMENTS SPELLED OUT IN THIS DESCRIPTION WILL BE APPLIED. RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment
TDP Rev A Gen 2 IAW BASIC SPEC NR MIL-S-22698C(2) NOT 3 REVISION NR C DTD 12/29/2020 PART PIECE NUMBER: GRADE A, ROLLER
TDP Rev A Gen 2 IAW REFERENCE DRAWING NR 0T3K3 ABSRULES REVISION NR 2 DTD 07/01/2022 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE QAP 13873 CDRLCOQC26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE QAP 13873 CDRL-METALSCERT-26124 REVISION NR DTD 12/04/2025 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE STD NR MIL-STD-129R(3) REVISION NR R DTD 02/25/2023 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE NON GOVT STD ASTM A700-14 (R 2019) REVISION NR DTD 11/01/2014 PART PIECE NUMBER:
TDP Rev A Gen 2 IAW REFERENCE NON GOVT STD SAE AMS2807C REVISION NR C DTD 05/01/2024 PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments%2FDLMS% 2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
ITEM NO. SUPPLIES/SERVICES QUANTITY UNIT UNIT PRICE AMOUNT. 0001 9515-00-153-3214 2.000 PM $ ______________ $ ______________ PLATE,METAL
PRICING TERMS: Firm Fixed Price
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
FOB: ORIGIN DELIVERY DATE: 30 DAYS ADO
PREP FOR DELIVERY:
SPE8E4-26-Q-0323
SECTION B
SUPPLY/SERVICE: 9515-00-153-3214 CONT'D
PKGING DATA MIL-STD-2073-1E QUP:001 PRES MTHD:ZZ CLNG/DRY:0 PRESV MAT:00 WRAP MAT:00 CUSH/DUNN MAT:00 CUSH/DUNN THKNESS:0 UNIT CONT:00 OPI:M PACK CODE:U MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129. SPECIAL MARKING CODE:ZZ -ZZ Special Requirements
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PRESERVATION ZZ = IAW ASTM A700 PACKING Z = ASTM A700 MARKING IAW MIL-STD-129
IP083: Packaging, Marking, and Shipping of Metal Plating, Sheets, and other Metal Products
The unpreserved item(s) shall be protected from physical damage and mechanical malfunction. Cushioning materials, dunnage, blocking and bracing shall be applied as required to protect the item (s) and the enclosing media and restrict the movement of the item within the container. The materials selected for all blocking and bracing, and the design and application thereof, shall be compatible with the item and its bearing load limitations. Materials shall be as clean and as dry as practicable.
SPECIAL PACKAGING CODES Z AND ZZ SHALL BE AS SPECIFIED IN ASTM A700. VINYL OR PLASTIC COATED PRESSURE SENSITIVE LABELS ARE AUTHORIZED FOR ALL MARKING ON STRUCTURAL SHAPES, PIECES SHIPPED LOOSE OR BANDED SECURED LIFTS. SECURED LIFTS SHALL BE IDENTIFIED ON EACH END.
ADDITIONAL MARKING REQUIREMENTS: WHEN THE CONTRACT OR ORDER REFLECTS TWO UNITS (EXAMPLE: FT-LB, LB-SH, LB-CL, ETC.) SHIPMENT MARKINGS SHALL INCLUDE THE QUANTITY OF BOTH UNITS. THIS MARKING DOES NOT APPLY FOR MATERIAL SHIPPED LOOSE.
PARCEL POST ADDRESS:
N42158
NORFOLK NAVAL SHIPYARD GF 1 NORFOLK NAVAL SHIPYARD BUILDING 276 PORTSMOUTH VA 23709-1001 US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
N42158
NORFOLK NAVAL SHIPYARD GF 1 NORFOLK NAVAL SHIPYARD BUILDING 276 PORTSMOUTH VA 23709-1001 US
M/F: (TCN) N4215860896001 RDD: 120 PROJ: 606 TP 1 SUPP ADD: Y 202 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 03
DIC: A0A DIST: 9B ADV: 2L FC: QR
SPE8E4-26-Q-0323
SECTION B
SUPPLY/SERVICE: 9515-00-153-3214 CONT'D
GOVT USE External External External Customer RDD/ ITEM PR PRLI PR PRLI Material Need Ship Date. 0001 7016197797 0001 N/A N/A N/A 04/03/2026

SPE8E4-26-Q-0323 NSN/Part Number: 9515-00-153-3214 Quantity: 2 PM Purchase Request: 7016197797QTY: 2 Delivery: 30 days ADO