This Solicitation opportunity from Department Of Defense was posted on July 29, 2026. The submission period has ended. Browse the details below for market research, or find similar active opportunities.

Top

PLATE, STRUCTURAL, AI

Closed

SPE4A5-26-T-313BFederal

Submission Closed08/06/2026, 05:00:00 PM UTC

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

Active Opportunities Like This One

NAICS: 336413

New

DIBBS

Manufacturer of Wiper Plate Assembly (PN 627915-1)This subcontract involves the fabrication and assembly of two Wiper Plate Assemblies (PN 627915-1) for prime contractors supporting DLA Weapons Support ASC projects. All manufacturing must strictly adhere to Naval Air Warfare Center Drawing 627915 Rev C and TDP Rev B Gen 5, with a specific prohibition against the use of additive manufacturing. Final products must be inspected and packaged according to MIL-STD-2073-1E standards. To be eligible, the manufacturer must maintain SAE AS9003 or ISO 9001 quality systems and hold a valid JCP certification to access necessary technical data. The project is managed under the Department of Defense, specifically the DLA Weapons Support ASC Supplier OE and AF Div, with performance located in Tracy, California. Responses are due by November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Precision Manufacturing of Retractor AssembliesThis subcontract involves the precision manufacturing and assembly of 119 Retractor Assemblies and Weapon Cradle Adapters for prime contractors under Department of Defense DLA supply contracts. The work requires strict adherence to Basic Drawing NR 30003 556AS164 Revision H and TDP Rev A Gen 1, utilizing precision CNC machining and specialized assembly jigs. Performance will take place in New Cumberland, Pennsylvania. To be eligible, the contractor must be an OEM-approved source or successfully obtain OEM approval. Additionally, the provider must maintain rigorous cybersecurity standards, ensuring full compliance with CMMC Level 2 and NIST SP 800-171. Responses for this requirement are due by November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Manufacturing of Aircraft Ground Servicing CoversThis subcontract involves the manufacturing of aircraft ground servicing covers for prime contractors supporting DLA Troop Support supply contracts. The scope of work requires the fabrication of 24 covers per NSN 1730016922679 and P/N 23060204, with all production adhering to the DLA Master List of Technical and Quality Requirements. A critical mandate of the agreement is strict compliance with the Berry Amendment to ensure all materials are sourced domestically. Managed under NAICS code 336413 for the Department of Defense, the project is overseen by Construction & Equipment Manu & Con. Performance of the contract will take place in New Cumberland, Pennsylvania. The solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

DEADLINE

Supply of Actuator Ring Sets (NSN 1650011934050)This subcontract involves the supply of 104 Critical Application Item actuator ring sets, identified by NSN 1650011934050, for prime contractors supporting Defense Logistics Agency aviation supply contracts. The contractor is responsible for manufacturing or sourcing part number C5791-30 in strict accordance with Tactair Fluid Controls Inc specifications. To ensure operational readiness and safety, all units must undergo quality inspections following MIL-STD-1916 and MIL-STD-105/ASQ Z1.4 standards. Additionally, the contractor must adhere to ASTM D3951 and MIL-STD-129 requirements for the packaging and labeling of the items before delivery.

Defense Logistics Agency

POSTED

DEADLINE

Manufacture of Packing with Retainer (P/N [phone hidden])This subcontract involves the precision manufacture of 29 Packing with Retainer assemblies for the Department of Defense under the DLA Weapons Support Nuclear Reactor Program. The components must be machined to meet Honeywell Aerospace part number [phone hidden] and NSN 5330-01-721-8818 specifications. Performance will take place in New Cumberland, Pennsylvania. Strict adherence to quality and safety standards is required, specifically compliance with RA001 quality requirements for Critical Application Items and NAVSEA 5100-003D mercury-free mandates. The solicitation was posted on October 28, 2026, with a response deadline of November 9, 2026.

DLA WEAPONS SUPPORT NUCLEAR REACTOR PROGRAM

POSTED

DEADLINE

Aircraft Swaging Sleeve FabricationThis subcontract involves the fabrication of 734 precision aircraft swaging sleeves for the Department of Defense, specifically supporting DLA Weapons Support ASC projects. The contractor is responsible for utilizing CNC machining or swaging equipment and aerospace-grade alloys to meet strict aerospace tolerances for NSN 4030-00-641-3921. In addition to the finished sleeves, the provider must deliver product verification test samples. Compliance requirements are stringent, necessitating CMMC Level 2 certification and adherence to ITAR and EAR regulations. All work must be performed in accordance with MIL-STD-1916 or ASQ H1331 standards. The solicitation was posted on October 28, 2026, with a response deadline of November 7, 2026, falling under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aerospace-Grade Alloy SupplierThis subcontract involves the supply of certified aerospace-grade raw materials to prime contractors supporting Department of Defense Construction and Equipment MRO SVC I contracts. The supplier is responsible for providing alloys that strictly adhere to technical specifications for NSN 4930-01-552-0232. To ensure full regulatory compliance, the provider must furnish Mill Test Reports verifying that all materials meet the requirements of the Buy American Act and the Berry Amendment. The performance of this contract will take place in Tracy, California, under NAICS code 336413. Interested parties should note that the solicitation was posted on October 28, 2026, with a response deadline set for November 9, 2026.

CONSTRUCTION & EQUIPMENT MRO SVC I

POSTED

DEADLINE

Supply of Critical Fluid Filter Elements (NSN 1650-01-669-3854)This subcontract involves the supply of four critical fluid filter elements, specifically Boeing part number 1732030 and NSN 1650-01-669-3854, for prime contractors under the Department of Defense DLA Weapons Support ASC. The contractor is responsible for manufacturing or sourcing these elements in strict accordance with TDP Rev A Gen 3 and QAP 13873. Performance takes place at Tinker AFB and requires adherence to ISO 9001:2015 quality systems and MIL-STD-1916 sampling standards. Essential compliance requirements include FAA Airworthiness Approval and adherence to DFARS Buy American regulations. All delivered units must be accompanied by full traceability and comprehensive airworthiness documentation to ensure flight safety and regulatory alignment. The opportunity is categorized under NAICS code 336413.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Supply of Dual Breakaway, Aux (NSN 1680015876928)This HUBZone set-aside subcontract involves the supply of seven Dual Breakaway, Aux units (NSN 1680015876928) for the Department of Defense, specifically the DLA Weapons Support ASC Supplier Oper AE and AF Div. The contractor is responsible for manufacturing or sourcing Part Number 21901-939, which is designated as a Critical Application Item. Delivery is required FOB Origin to New Cumberland, Pennsylvania. Strict adherence to quality and regulatory standards is mandatory, including quality control per MIL-STD-1916 or ASQ H1331 and marking and labeling according to MIL-STD-129 and MIL-STD-130 IUID. Additionally, the provider must maintain Buy American Act compliance and complete a CMMC Level 2 Self-Assessment. The response deadline for this requirement is November 5, 2026.

DLA WEAPONS SUPPORT ASC SUPPLIER OPER AE AND AF DIV

POSTED

DEADLINE

Aircraft Structural Web Manufacturer/SupplierThis subcontract involves the manufacture or procurement of one Aircraft Structural Component Web, specifically Boeing part number 5-95518-2003, for prime contractors supporting Defense Logistics Agency supply contracts. The project requires the use of aerospace-grade structural materials and precision machining in strict accordance with the DLA Master List of Technical and Quality Requirements RA001. To be eligible, the supplier must maintain a CMMC Level 2 self-assessment and hold certification in either ISO 9001 or SAE AS9003 quality systems. The final deliverable consists of one structural web that is properly packaged and marked. This opportunity is categorized under NAICS code 336413 and is managed by the Department of Defense.

Defense Logistics Agency

POSTED

DEADLINE

Supply of Vaneaxial Fans (NSN 4140-01-124-5519)This subcontract involves the supply of six vaneaxial fans, identified by NSN 4140-01-124-5519, for Department of Defense aircraft projects. The items are designated as Critical Application Items for Sikorsky Aircraft Corporation and must be manufactured or sourced to meet strict aviation-grade technical specifications. Performance will take place at Robins Air Force Base. To be eligible, the provider must possess a valid CAGE code and demonstrate compliance with NIST SP 800-171 DOD Assessment Requirements. The contract is managed under NAICS code 336413 through the agency at Warner Robins, with a response deadline set for November 9, 2026.

POSTED

DEADLINE

Pivot Cover (NSN 2915-01-218-8075) SupplyThis subcontract involves the supply of 58 Pivot Covers, identified by NSN 2915012188075, for prime contractors supporting US Air Force aircraft projects. The Department of Defense, through the DLA Weapons Support ASC Commodities Division, requires these components to be manufactured or sourced in strict accordance with Air Force Designated Critical Safety and Critical Application standards. To ensure full compliance with NSN technical specifications, the provider must utilize precision manufacturing equipment and furnish all necessary CSI certifications and quality documentation. The performance of this contract is centered at Tinker AFB. Interested parties should note that the response deadline is November 5, 2026, with the project falling under NAICS code 336413.

DLA WEAPONS SUPPORT ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 8 days

AI Contract Overview

The contract specifies the procurement of a structural plate identified by NSN 1560016936152 and part number 356T0102-1, supplied in a quantity of one unit under solicitation SPE4A5-26-T-313B. The item is classified as a critical application component for Boeing and is subject to stringent technical and quality standards referenced from the DLA Master List of Technical and Quality Requirements, which incorporate R and I numbers as governing specifications. Cybersecurity compliance requires a CMMC Level 2 self-assessment, and supply chain traceability documentation must be retained per DLA Directive Procurement Note C03. The plate must meet FAA bare item marking requirements and airworthiness approval standards, with verification procedures aligned to MIL-STD-1916 or ASQ H1331, including zero non-conformances in sampling unless otherwise stated. Packaging and marking adherence to MIL-STD-2073-1E and MIL-STD-129 is mandatory, with palletization following DLA Packaging Requirements, and parcel post shipping is explicitly prohibited. Delivery is FOB origin with a strict 20-day timeline, inspection and acceptance occurring at destination, and both units carry identical packaging and delivery conditions. The contract also defines specific freight and receiving addresses at Joint Base MDL, New Jersey, and requires shipment by the fastest traceable means with unique tracking identifiers. Unit price is set at $1.00, total price reflects nominal value, and no quantity variance is permitted. The item does not require Unique Identification per customer request, and all documentation and compliance obligations are tied to active DLA and DoD directives as of the solicitation and award dates.

General Info

One structural plate, NSN 1560016936152, $1.00, FOB origin, 20-day delivery, CMMC Level 2, DLA compliance, FAA airworthiness, no parcel post.

Agency

Department Of Defense → ASC SUPPLIER OPER OEM DIVISION

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment Manufacturing

Place of Performance

1757 VANDENBERG AVE BLDG 1757, JB MDL, NJ, 08641-5500, USA

Set-Aside

NONE

Documents

RFQ SPE4A5-26-T-313B DLA Aviation Jul 30 2026

rfq

High

AI Contract Breakdown

Uniform Contract Format

Timeline

1 update

PhaseClosed

PostedJul 29

Solicitation

Notice updatedJul 29

The notice description changed.

Response DeadlineAug 6

Deadline has passed

Submission Closed

08/06/2026, 05:00:00 PM UTC

Find active opportunities like this

Get full access to discover similar active contracts, track opportunities, and build proposals with AI assistance.

Organization & Contact Information

AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Contacts1 person available

OfficeUSA

Organization / AgencyDepartment Of Defense → ASC SUPPLIER OPER OEM DIVISION

Office AddressUSA

Contacts

APRILE CORLEY

contact@example.gov

+1 (555) 000-0000

Full Description

PLATE,STRUCTURAL,AI
PLATE,STRUCTURAL,AI
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RD004: Cybersecurity Maturity Model Certification (CMMC) Level 2 Self-Assessment RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RP003: PRESERVATION, PACKAGING, PACKING AND MARKING REQUIREMENTS FOR
FEDERAL AVIATION ADMINISTRATION COMMERICAL MATERIAL
RQ002: CONFIGURATION CHANGE MANAGEMENT ENGINEERING CHANGE PROPOSAL
REQUEST FOR VARIANCE (DEVIATION OR WAIVER)
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ018: CONTRACTOR RETENTION OF SUPPLY CHAIN TRACEABILITY DOCUMENTATION
(AUG 2016)
This item requires supply chain traceability documentation in accordance with DLA Directive (DLAD) Procurement Notes #C03 Contractor Retention of Supply Chain Traceability Documentation (AUG 2016)#. The full text of C03 can be found in the DLAD Procurement Notes on the Web at: http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx. (End of TQ Requirement)
Item Unique Identification is not required by request of the Service customer. DFARS 252.211-7003(c)(1)(i) applies.
RQ046: FAA Bare Item Marking Requirements
SAMPLING: THE SAMPLING METHOD SHALL BE IN ACCORDANCE WITH MIL-STD-1916 OR ASQ H1331, TABLE 1 OR A COMPARABLE ZERO BASED SAMPLING PLAN UNLESS OTHERWISE SPECIFIED BY THE CONTRACT. IF THE APPLICABLE DRAWING, SPECIFICATION, STANDARD, OR QUALITY ASSURANCE PROVISION (QAP) SPECIFIES CRITICAL, MAJOR AND/OR MINOR ATTRIBUTES, THEY SHALL BE ASSIGNED VERIFICAITON LEVELS OF VII, IV AND II OR AQLS OF 0.1, 1.0 AND 4.0 RESPECTIVELY. UNSPECIFIED ATTRIBUTES SHALL BE CONSIDERED AS MAJOR UNLESS SAMPLING PLANS ARE SPECIFIED IN APPLICABLE DOCUMENTS. FOR MIL-STD-1916, THE MANUFACTURER MAY USE THE ATTRIBUTE OR VARIABLE INSPECTION METHOD AT THEIR OPTION OR PER THE CONTRACT. MIL-STD-105/ASQ Z1.4 MAY BE USED TO SET SAMPLE LOT SIZE, BUT ACCEPTANCE WOULD BE ZERO NON-CONFORMANCES IN THE SAMPLE LOT UNLESS OTHERWISE SPECIFIED IN THE CONTRACT.
REFER TO PROC NOTE L32 FOR HIGHER LEVEL QUALITY REQUIREMENTS
SPE4A5-26-T-313B
SECTION B
The following Contract Data Requirements Lists (CDRLs), DD Form 1423s, apply to this procurement. Review the Technical Data Package (TDP) for additional information. Certificate of Airworthiness and Conformance for FAA Certified Parts and Commercial Derivative Aircraft Parts
RQ019: Federal Aviation Administration (FAA) Airworthiness Approval Refer to Proc Note L32 for higher level quality requirements
CRITICAL APPLICATION ITEM
THE BOEING COMPANY 81205 P/N 356T0102-1
IAW REFERENCE REVISION NR DTD PART PIECE NUMBER:
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0001 7017559633 0001 EA 1.000
NSN/MATERIAL:1560016936152
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB4484
FB4484 305 APS TROTD/RECVNG OFFICE
CP +1 (555) 000-0000
1757 VANDENBERG AVE BLDG 1757
JB MDL NJ 08641-5500
US
SPE4A5-26-T-313B
SECTION B
PR: 7017559633 PRLI: 0001 CONT’D
RDD 777 SHIPMENT. SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4484
FB4484 305 APS TROTD/RECVNG OFFICE
CP +1 (555) 000-0000
1757 VANDENBERG AVE BLDG 1757
JB MDL NJ 08641-5500
US
M/F: (TCN) FB448461950028
RDD: 777
PROJ: 046 TP 2
SUPP ADD: YBQ860 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/17/2026
DLA issues this document using the DoD authorized unit of issue, please refer to the following URL to determine the corresponding ANSI X12 unit of issue.
https://view.officeapps.live.com/op/view.aspx?src=https%3A%2F%2Fwww.dla.mil%2FPortals%2F104%2FDocuments% 2FDLMS%2FeApplications%2FLogDataAdmin%2FUnitofIssueandPurchaseUnit.xlsx&wdOrigin=BROWSELINK
CLIN PR PRLI UI QUANTITY UNIT PRICE TOTAL PRICE.
0002 7017589199 0001 EA 1.000
NSN/MATERIAL:1560016936152
DELIVERY (IN DAYS):0020
DELIVER FOB: ORIGIN
QTY VARIANCE: PLUS 0% MINUS 0%
INSPECTION POINT: DESTINATION
ACCEPTANCE POINT: DESTINATION
PREP FOR DELIVERY:
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
SPE4A5-26-T-313B
SECTION B
PR: 7017589199 PRLI: 0001 CONT’D
PKGING DATA MIL-STD-2073-1E
QUP:001 PRES MTHD:10 CLNG/DRY:1 PRESV MAT:00
WRAP MAT:00 CUSH/DUNN MAT:NA CUSH/DUNN THKNESS:C
UNIT CONT:E5 OPI:M
INTRMDTE CONT:E5 INTRMDTE CONT QTY:AAA
PACK CODE:U
MARKING SHALL BE IN ACCORDANCE WITH MIL-STD-129.
SPECIAL MARKING CODE:00 -00 No special marking
PALLETIZATION SHALL BE IN ACCORDANCE WITH RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
PARCEL POST ADDRESS:
FB4484
FB4484 305 APS TROTD/RECVNG OFFICE
CP +1 (555) 000-0000
1757 VANDENBERG AVE BLDG 1757
JB MDL NJ 08641-5500
US
SHIP BY FASTEST TRACEABLE MEANS. DO NOT USE PARCEL POST.
FREIGHT SHIPPING ADDRESS:
FB4484
FB4484 305 APS TROTD/RECVNG OFFICE
CP +1 (555) 000-0000
1757 VANDENBERG AVE BLDG 1757
JB MDL NJ 08641-5500
US
M/F: (TCN) FB448461970162
RDD: 219
PROJ: 046 TP 2
SUPP ADD: YBQ627 SIG: A
FOR GOVERNMENT USE ONLY: (IPD) 05
DIC: A0A DIST: 01 ADV: 2D FC: 6C
Need Ship Date:00/00/0000 Original Required Delivery Date:07/21/2026
SPE4A5-26-T-313B NSN/Part Number: 1560-01-693-6152 Quantity: 1 EA Purchase Request: 7017589199QTY: 1 Delivery: 20 days ADO