Skip to main contentPsst! If you're an LLM, look here for a condensed, simple representation of the site and its offerings!

LiveFree Webinar — Wednesday, September 2 at 2:00 PM EDT

Register Free →
logo
Get CLEATUS

PLATE, TAIL LANDING

Active
SPE4A7-26-T-703RFederal

Contract Overview

Solicitation details, issuing organization, response deadlines, documents, and interested companies for this government contract opportunity.

AI Contract Overview

Show more

This solicitation, issued by the Department of Defense ASC Supplier Oper AE and AF Div, is for the procurement of 83 units of Tail Landing Gear Plates under NSN 1630-01-290-3120. The contract requires delivery within 130 days after receipt of order and adheres to specific technical and quality standards outlined in the DLA Master List, including specialized packaging and higher-level quality requirements. Inspection and acceptance are to be conducted at the origin. A critical component of this agreement is the strict adherence to export control regulations, as the technical data is subject to ITAR or EAR restrictions. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification and completed Department of Defense export-controlled technical data training. The solicitation is identified by number SPE4A7-26-T-703R with a response deadline of September 8, 2026.

General Info

DoD procurement of 83 Tail Landing Gear Plates by September 8, 2026.

Agency

Department Of Defense → ASC SUPPLIER OPER AE AND AF DIVView Agency

NAICS

336413 - Other Aircraft Parts and Auxiliary Equipment ManufacturingView NAICS

Place of Performance

2083 NORMANDY DRIVE DOOR 113 TO 134, NEW CUMBERLAND, PA, 17070-5002, USA

Set-Aside

NONE

Documents

(1)

SPE4A7-26-T-703R.pdf

PDF

AI Contract Breakdown

Uniform Contract Format

What is UCF?

Uniform Contract Format (UCF) uses AI to break down any contract into standardized sections—scope, pricing, deliverables, and evaluation criteria.

Timeline

PhaseSolicitation
Posted

Solicitation

Response Deadline

Submission deadline

Response Deadline

Ready to pursue this opportunity?

Start your free trial to track this contract, build proposals with AI assistance, and manage your pipeline.

Organization & Contact Information

Show more
AgencyDepartment Of Defense → ASC SUPPLIER OPER AE AND AF DIV
Contacts1 person available
OfficeUSA
Organization / Agency
Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV
View Agency Profile
Office AddressUSA
Contacts
MADELINE MACKIE
contact@example.gov

Full Description

Show more
PLATE,TAIL LANDING
PLATE, TAIL LANDING GEAR
RA001: THIS DOCUMENT INCORPORATES TECHNICAL AND/OR QUALITY REQUIREMENTS
(IDENTIFIED BY AN 'R' OR AN 'I' NUMBER) SET FORTH IN FULL TEXT IN THE
DLA MASTER LIST OF TECHNICAL AND QUALITY REQUIREMENTS FOUND ON THE WEB
AT:
http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx http://www.dla.mil/HQ/Acquisition/Offers/eProcurement.aspx
FOR SIMPLIFIED ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE SOLICITATION ISSUE DATE OR THE AWARD DATE CONTROLS. FOR LARGE ACQUISITIONS, THE REVISION OF THE MASTER IN EFFECT ON THE RFP ISSUE DATE APPLIES UNLESS A SOLICITATION AMENDMENT INCORPORATES A FOLLOW-ON REVISION, IN WHICH CASE THE AMENDMENT DATE CONTROLS.
RD002, COVERED DEFENSE INFORMATION APPLIES
RP001: DLA PACKAGING REQUIREMENTS FOR PROCUREMENT
RQ001: TAILORED HIGHER LEVEL CONTRACT QUALITY REQUIREMENTS
(MANUFACTURERS AND NON-MANUFACTURERS)
RQ009: INSPECTION AND ACCEPTANCE AT ORIGIN
RQ011: REMOVAL OF GOVERNMENT IDENTIFICATION FROM NON-ACCEPTED SUPPLIES
RQ032: EXPORT CONTROL OF TECHNICAL DATA
This item has technical data some or all of which is subject to export-control of either the International Traffic in Arms regulations (ITAR) or the Export Administration Regulations (EAR), and cannot be exported without prior authorization from either the Department of State or the Department of Commerce. Export includes disclosure of technical data to foreign persons and nationals whether located in the United States or abroad. This requirement applies equally to foreign national employees and U.S. companies and their foreign subsidiaries. DFARS 252.225-7048 is applicable to this data.
The Defense Logistics Agency (DLA) limits distribution of export-control technical data to DLA contractors that have an approved US/Canada Joint Certification Program (JCP) certification, have completed the Introduction to Proper Handling of DOD Export-Controlled Technical Data Training and the DLA Export-Controlled Technical Data Questionnaire (both are available at the web address given below), and have been approved by the DLA controlling authority to access the export-controlled data. NSN/Part Number: 1630-01-290-3120 Quantity: 83 EA Purchase Request: 7017572344QTY: 83 Delivery: 130 days ADO

Similar Contracts

Same NAICS industry code

NAICS: 336413
New
DIBBS
PIN, WARNING STREAMER
Solicitation # SPE8EF-26-T-1691
This solicitation from the Department of Defense involves the procurement of 52 units of ground safety warning streamer pins, identified by NSN 1730-00-172-4265. The contract requires delivery within 157 days after the order is placed and specifies adherence to DLA packaging requirements. The place of performance is designated as Robins Air Force Base. A critical component of this contract is the strict adherence to export control regulations, as the technical data is subject to ITAR and EAR restrictions. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification who have completed the required DOD export-control training and questionnaires. Failure to comply with these regulations, including the unauthorized disclosure of data to foreign nationals, is strictly prohibited under DFARS 252.225-7048.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
LAP ASSEMBLY, RELIEF
Solicitation # SPE7M4-26-T-374P
This solicitation is for the procurement of three Lap Assembly, Relief units, identified by NSN 1650-01-077-7361, for the Department of Defense Fluid Handling Division. The contract is associated with Eaton Aerospace LLC, doing business as Sterer Engineering Div Vickers, and specifies a delivery timeline of 144 days after the order is placed. Performance is designated for Hill AFB. The agreement mandates compliance with DLA packaging requirements, Covered Defense Information protocols, and CMMC Level 2 self-assessment for cybersecurity. While Item Unique Identification is not required, the contractor must adhere to specific sampling methods per MIL-STD-1916 or ASQ H1331. Additionally, the contract incorporates the DLA Master List of Technical and Quality Requirements and requires the removal of government identification from any non-accepted supplies.
FLUID HANDLING DIVISION

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
TARGET, SILHOUETTE
Solicitation # SPE8E6-26-T-4390
This contract is a solicitation issued by the Defense Logistics Agency for the procurement of silhouette targets, identified by NSN 6920-01-167-1395. The requirement is for one box containing 500 units, with a required delivery date of January 28, 2026, and a delivery window of 20 days after receipt of order. The items must be manufactured according to technical drawing 19200 9354565 Revision A and delivered FOB Origin to a facility in Sandston, Virginia. Compliance requirements include adherence to MIL-STD-130N for identification marking and ASTM D3951 for packaging, with palletization following DLA packaging requirements. The contractor must meet Cybersecurity Maturity Model Certification Level 2 self-assessment standards and follow specific sampling methods per MIL-STD-1916 or ASQ H1331. All shipments must be sent via traceable means, and the contract mandates the removal of government identification from any non-accepted supplies.
Defense Logistics Agency

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
SHROUD, TANK
Solicitation # SPE4A0-26-T-4528
This contract is for the procurement of one tank shroud, identified by NSN 1680-01-714-4155 and part number 407522-4. The item is designated as a critical application item and requires strict adherence to technical and quality requirements, including FAA airworthiness approval and supply chain traceability documentation. Sampling and inspection must follow MIL-STD-1916 or ASQ H1331 standards, with inspection and acceptance occurring at the destination. Delivery is required within five days of order, with a required delivery date of August 20, 2026. The item must be shipped via the fastest traceable means to Tinker AFB, Oklahoma, following specific DLA packaging and marking requirements per MIL-STD-129 and MIL-STD-2073-1E. The procurement is managed by the Department of Defense Aviation Supply Chain under solicitation number SPE4A0-26-T-4528.
AVIATION SUPPLY CHAIN ESOC BUYS

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
LADDER-PLATFORM, ACC
Solicitation # SPE4A7-26-T-704Q
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of one ladder-platform accessory, identified by NSN 1680-01-682-9795. The contract requires delivery within 10 days after the order is placed, with the place of performance located at Fort Bliss, Texas. The agreement is subject to strict technical and quality requirements, including specific DLA packaging standards and inspection and acceptance at the origin. It mandates compliance with Qualified Products Lists and Qualified Manufacturers Lists for components. Furthermore, the contract contains sensitive technical data subject to ITAR and EAR export controls, requiring contractors to have approved US/Canada Joint Certification Program certification and completed specific Department of Defense training to access the data.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
SEGMENT, CYLINDER AS
Solicitation # SPE4A7-26-T-704G
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of 131 units of Cylinder Assembly Segments, identified by NSN 1650-00-739-1904. The contract requires delivery within 130 days after receipt of order and is associated with NAICS code 336413. Performance is designated for Hill AFB. A critical component of this contract is the strict adherence to export control regulations, as the technical data is subject to ITAR and EAR restrictions. Access to this data is limited to contractors with an approved US/Canada Joint Certification Program certification and completed DLA export-control training. Additionally, all shipments must comply with DLA packaging requirements RP001.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
PAD, HOIST ADAPTER, G
Solicitation # SPE8EF-26-T-1694
This solicitation, identified as SPE8EF-26-T-1694, is issued by the Department of Defense for the procurement of four hoist adapter pads for a gun system, identified by NSN 1730-01-129-3574. The contract requires delivery within five days after the order is received. The procurement is managed by the Defense Logistics Agency and falls under NAICS code 336413. The contract is subject to strict technical and quality requirements, including CMMC Level 2 certification and specific DLA packaging and marking standards. Notably, the item contains technical data subject to ITAR or EAR export controls, meaning it cannot be exported or disclosed to foreign nationals without prior authorization. Access to this data is limited to contractors with approved US/Canada Joint Certification Program certification and completed export-control training.
CONSTRUCTION & EQUIPMENT MANU & CON

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
PRODUCTION LOT TESTING
Solicitation # SPE4A6-26-T-24XX
This solicitation for the Department of Defense involves the procurement of 10 units of part number 17159101. The contract requires the contractor to deliver two units for First Article Testing within 180 calendar days of the contract date to the Critical Item Management office in San Diego, California. The government will then provide a written decision on the approval or disapproval of these units within 180 days of receipt. Following First Article approval, the contractor must undergo Production Lot Testing to validate quality conformance. This process requires providing 14 days notice before the Quality Assurance Representative selects two random samples from the production lot for testing. The contractor is responsible for pricing the cost of samples consumed during this process and must provide comprehensive documentation, including material certifications and test reports, with each shipment. Delivery for the final quantity is set for 677 days after the order.
ASC COMMODITIES DIVISION

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
COMPUTER, DIGITAL
Solicitation # SPE8EN-26-T-3033
This contract, identified as SPE8EN-26-T-3033, is a solicitation from the Department of Defense for the procurement of two digital computers, part number 053-02170-8032, under NSN 7021-01-574-7503. The delivery is required within five days after the order, with a required delivery date of August 27, 2026. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically Guided Weapons Sustainment West in Rockingham, Australia. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific packaging standards per ASTM D3951 and MIL-STD-129, and CMMC Level 2 self-assessment for cybersecurity. It prohibits the intentional addition of mercury or mercury-containing compounds to the hardware, except for specific functional exceptions. The contract also incorporates requirements for the removal of government identification from non-accepted supplies and the protection of covered defense information.
CONSTRUCTION & EQUIPMENT T & IFO EQ

POSTED

about 4 hours ago

DEADLINE

in 11 days
View Details
NAICS: 336413
New
DIBBS
GOVERNMENT FIRST ARTIC
Solicitation # SPE4A7-26-T-703Q
This solicitation, issued by the Department of Defense under the ASC Supplier Oper AE and AF Div, is for the procurement of seven aircraft trailing edges identified by part number 0001S00000052. The contract is a total small business set-aside under NAICS code 336413, with a delivery requirement of 534 days after order. Performance is located at Robins Air Force Base. The agreement is subject to strict technical and quality requirements as defined by the DLA Master List, including specific packaging standards and inspection and acceptance at origin. Due to the nature of the technical data, the contract is governed by ITAR and EAR export controls. Access to this data is restricted to approved DLA contractors with valid US/Canada Joint Certification Program certification and completed export-control training.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
RETURN PATH BOBBIN
Solicitation # SPE4A7-26-T-703Z
This contract is for the procurement of one Return Path Bobbin, identified by NSN 1270-01-233-9189 and part number 143-3407-118A from MPC Products Corp. The delivery is required within 10 days after the order, with a required delivery date of August 12, 2026. The item is to be delivered FOB Origin to the US Army at Fort Bliss, Texas, and must be shipped via the fastest traceable means. The agreement mandates compliance with the DLA Master List of Technical and Quality Requirements, specifically regarding packaging, government identification removal, and bare item marking. Packaging must adhere to ASTM D3951 and MIL-STD-129, with palletization following RP001 requirements. Quality assurance will be managed through sampling methods such as MIL-STD-1916 or ASQ H1331, and the item is noted to have no shelf life requirement and no requirement for Item Unique Identification.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-703H
This solicitation from the Department of Defense, issued by the ASC Supplier OE and AF Div, is for the procurement of two structural support units under part number 1560-01-154-8974. The contract requires delivery within 197 days after the order is placed. It is governed by the DLA Master List of Technical and Quality Requirements, with specific mandates for source approval request documentation, packaging requirements, and inspection and acceptance at the origin. Compliance is mandatory for CMMC Level 2 certification and the protection of covered defense information. The project is subject to strict export controls under ITAR and EAR regulations, meaning technical data cannot be shared with foreign nationals without prior authorization. Additionally, the contract specifies requirements for physical identification and bare item marking, though item unique identification is not required by the service customer.
ASC SUPPLIER OPER AE AND AF DIV

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details

More opportunities from Department Of Defense → ASC SUPPLIER OPER AE AND AF DIV

Same awarding agency

NAICS: 332510
New
DIBBS
SPACER, SLEEVE
Solicitation # SPE4A7-26-T-703V
This contract is for the procurement of one sleeve spacer, identified by NSN 5365012906215 and part number 02-4271-35 from Safran Power USA LLC. The order is managed under solicitation SPE4A7-26-T-703V with a required delivery date of September 2, 2026, and a delivery window of 20 days after receipt of order. The item is to be delivered FOB Origin to the Taiwan Army Zuo-Ying Ammunition Sub in Kaohsiung City, Taiwan. The agreement mandates strict adherence to DLA packaging and quality requirements, including MIL-STD-2073-1E for packaging and MIL-STD-129 for marking. Quality assurance and sampling must comply with MIL-STD-1916 or ASQ H1331, utilizing a zero-based sampling plan. All technical and quality requirements are governed by the DLA Master List, and the contract specifies a zero percent quantity variance.
Hardware Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 332722
New
DIBBS
BOLT, SHEAR
Solicitation # SPE4A7-26-T-704J
This contract is for the procurement of 465 shear bolts, identified as NSN 5306011080040 and part number NAS6216-27D. The items are classified as critical application commercial hardware and must be manufactured according to the current revisions of NAS4002 and NAS6203 through NAS6220 standards. Quality assurance requires adherence to specific sampling methods, including MIL-STD-1916 or ASQ H1331, with strict gauging requirements for Class 3A and 3B threads per FED-STD-H28/20. The agreement specifies that inspection and acceptance will occur at the origin, with delivery required within 121 days after the order. Packaging and marking must comply with MIL-STD-2073-1E, MIL-STD-129, and DLA packaging requirements. The final destination for the shipment is DLA Distribution Cherry Point in North Carolina.
Bolt, Nut, Screw, Rivet, and Washer Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 314999
New
DIBBS
STEERING LINE, PARAC
Solicitation # SPE4A7-26-T-704W
This contract is for the procurement of 271 kits of Parac Steering Line, identified by NSN 1670-01-737-9632 and part number 826224-1. The order is issued by the Department of Defense under solicitation SPE4A7-26-T-704W with a required delivery date of June 30, 2026. Delivery is required within 20 days after the order, with shipping set as FOB Origin and inspection and acceptance occurring at the destination. The material is classified as non-hazardous and has no shelf life requirements. Compliance is required for DLA packaging standards, including MIL-STD-2073-1 and MIL-STD-129 for marking and barcoding. Quality assurance will follow MIL-STD-1916 or ASQ H1331 sampling plans. Final delivery is directed to the Marine Raider Regiment at Camp Lejeune, North Carolina, and must be shipped via traceable means rather than parcel post.
All Other Miscellaneous Textile Product Mills

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335999
New
DIBBS
CONTRACTOR FIRST ARTIC
Solicitation # SPE4A7-26-T-702V
This contract is for the procurement of red-orange electrical insulation tape conforming to MIL-I-22444C, with specifications of 1 inch width and a thickness between 0.015 and 0.020 inches. The item is designated as a critical application item with a non-extendable shelf life of 12 months. The order consists of one roll to be delivered FOB Origin within 80 days after the order. The supplier must adhere to ISO 9001:2015 quality standards and follow specific DLA packaging and marking requirements, including MIL-STD-129 and MIL-STD-2073-1E. A mandatory first article test is required, involving a 100 percent dimensional characteristics check on two items produced at the actual production facility. Inspection and acceptance will occur at the origin, with sampling conducted according to MIL-STD-1916 or ASQ H1331.
All Other Miscellaneous Electrical Equipment and Component Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 333310
New
DIBBS
REGULATOR AND HOSE
Solicitation # SPE4A7-26-T-702X
This contract is for the procurement of one Regulator and Hose Assembly, identified as a Desurger Charging Assembly with part number KT-3186-3 and NSN 3655-01-094-3321. The order is designated for delivery to the USS Kentucky SSBN 737, with a required delivery timeframe of 20 days after the order is placed. The shipment must be sent via the fastest traceable means, specifically avoiding parcel post, and must adhere to strict destination inspection and acceptance protocols. The agreement mandates compliance with DLA packaging requirements and MIL-STD-129 marking standards, including a fragile designation. Quality assurance is governed by MIL-STD-1916 or ASQ H1331 sampling plans, and the contract strictly prohibits the intentional addition of mercury or mercury-containing compounds, except in specific functional cases. Item Unique Identification is not required for this request.
Commercial and Service Industry Machinery Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 335932
New
DIBBS
STRAP, TIE DOWN, ELEC
Solicitation # SPE4A7-26-T-704D
This contract is for the procurement of 127 electrical tie down straps, identified by NSN 5975016143447 and Uline part number S-3808. The order is designated as a critical application item with a required delivery date of December 23, 2026, and a delivery window of 105 days. Shipping is FOB Origin, with inspection and acceptance occurring at the destination, specifically the DLA Distribution New Cumberland facility in Pennsylvania. The agreement mandates strict adherence to the DLA Master List of Technical and Quality Requirements, including specific standards for packaging, physical identification, and measuring equipment. Sampling must follow MIL-STD-1916 or ASQ H1331, and packaging must comply with MIL-STD-129 and RP001. There is no shelf life requirement for this material, and item unique identification is not required by the service customer.
Noncurrent-Carrying Wiring Device Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details
NAICS: 336413
New
DIBBS
SUPPORT, STRUCTURAL
Solicitation # SPE4A7-26-T-703P
This solicitation, identified as SPE4A7-26-T-703P, is for the procurement of seven structural component supports for aircraft, part number 4-3904-145 and NSN 1560-01-524-8051. The contract is issued by the Department of Defense through the ASC Supplier OE and AF Division, with a delivery requirement of 116 days after order. Performance is designated for Tinker AFB. The agreement includes stringent technical and quality requirements, including CMMC Level 2 certification and adherence to DLA packaging and marking standards. It mandates strict compliance with export controls under ITAR and EAR regulations, requiring approved US/Canada Joint Certification Program certification for access to technical data. Additionally, the contract specifies requirements for configuration change management, inspection and acceptance at origin, and the use of Qualified Products or Manufacturers Lists.
Other Aircraft Parts and Auxiliary Equipment Manufacturing

POSTED

about 4 hours ago

DEADLINE

in 9 days
View Details