PLUG, MACHINE THREAD

The contract is for a plug with a machine thread, identified by NSN 5365-00-807-0007 and part number AS5169R03L, manufactured in accordance with SAE AS5169C Revision C dated 02/01/2021. This item is classified as a critical application product and is subject to strict quality controls under the Performance Review Institute’s Qualified Manufacturers List or Qualified Products List, meaning it must be produced or assembled only by accredited manufacturers or distributors listed on the PRI QML/QPL, accessible via eauditnet.com. Technical and quality requirements referenced by R or I numbers are governed by the DLA Master List of Technical and Quality Requirements, which takes precedence over all other standards, including ASTM D3951. Packaging must comply with MIL-STD-129 and RP001, with no deviations allowed, and items must be marked and labeled per RQ017. Sampling requirements mandate zero non-conformances unless otherwise specified, following MIL-STD-1916 or ASQ H1331, with critical, major, and minor attributes assigned verification levels VII, IV, and II respectively. The contract specifies a quantity of 484 units, delivered FOB origin within 190 days, with inspection and acceptance occurring at destination. The unit of issue is each, with a price of $484.00 per unit, and the delivery address is Arizona Industries for the Blind in Phoenix, AZ. The original required delivery date is July 1, 2027, though the need ship date is July 21, 2026, and the solicitation closed on July 31, 2026. All provisions regarding source approval, packaging, identification removal, and transportation are binding and must be aligned with DLA procedures and contract clauses.